Accueil
Résultat de la recherche
50 résultat(s) recherche sur le tag 'Mécanique'
Ajouter le résultat dans votre panier Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche
Mesure en ligne du comportement visqueux d'un amidon de blé en cours d'extrusion. Application à la cationisation / A. Tara in RHEOLOGIE, Vol. 8 (11/2005)
[article]
Titre : Mesure en ligne du comportement visqueux d'un amidon de blé en cours d'extrusion. Application à la cationisation Type de document : texte imprimé Auteurs : A. Tara, Auteur ; S. Moughamir, Auteur ; L. Tighzert, Auteur ; Françoise Berzin, Auteur Année de publication : 2005 Article en page(s) : p. 5-12 Note générale : Bibliogr. Langues : Français (fre) Catégories : Amidon de blé
Extrusion (mécanique)
ViscosimétrieTags : 'Amidon blé' 'Filière plate' 'Extrusion bivis' 'Energie mécanique spécifique' Cationisation Index. décimale : 532.05 Mécanique des fluides et des liquides - Dynamique (cinétique et cinématique) Résumé : une filière plate à double canaux est utilisée pour mesurer en ligne le comportement visqueux d'un amidon de blé extrudé. Ce système permet de mettre en évidence l'influence respective de la température, de la teneur en eau et de l'énergie spécifique. La loi de comportement proposée permet de prédire de manière satisfaisante le comportement d'un amidon de blé, pour des conditions de transformation données. Pour la première fois, des mesures sont présentées pour les amidons cationiques obtenus par extrusion réactive. En ligne : http://www.legfr.fr/larevue/index.php?Page=article&Vol=0008&NumArticle=1 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5372
in RHEOLOGIE > Vol. 8 (11/2005) . - p. 5-12[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 003449 - Périodique Bibliothèque principale Documentaires Disponible Supports textiles revêtus de caoutchouc ou de plastique. Détermination de la force de rupture et de l'allongement à la rupture - Norme NF EN ISO 1421 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1998)
Titre : Supports textiles revêtus de caoutchouc ou de plastique. Détermination de la force de rupture et de l'allongement à la rupture - Norme NF EN ISO 1421 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 1998 Importance : 11 p. Présentation : ill. Format : 30 cm Note générale : Annexe Langues : Français (fre) Catégories : Essais (technologie)
Rupture (mécanique)
Textiles et tissus -- Apprêt
Textiles et tissus -- NormesTags : Textile Support textile revêtu Etoffe revêtue caoutchouc plastique Essai mécanique traction Détermination Résistance Allongement rupture Charge Mode opératoire Index. décimale : 677 Textiles Résumé : Le présent document définit deux méthodes de détermination de la résistance à la traction et une méthode de détermination de l'allongement à la rupture, à l'aide d'une machine de traction à vitesse d'extension constante. Indice de classement : G 37-103 Classification ICS : 59.080.40 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=4176 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité N000036 G 37-103 Norme Bibliothèque principale Documentaires Disponible Les enjeux du contrôle non destructif des matériaux composites pour applications navales militaires / Françoise Artiga-Dubois in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 17, N° 2 (05-06-07-08/2007)
[article]
fait partie de Vol. 17, N° 2 - 05-06-07-08/2007 - Contrôles non destructifs et matériaux composites - Journée scientifique et technique - AMAC/COFREND (Bulletin de REVUE DES COMPOSITES ET DES MATERIAUX AVANCES) / Philippe Olivier
Titre : Les enjeux du contrôle non destructif des matériaux composites pour applications navales militaires Type de document : texte imprimé Auteurs : Françoise Artiga-Dubois, Auteur Année de publication : 2007 Article en page(s) : p. 207-216 Note générale : Bibliogr. Langues : Français (fre) Tags : Composites Contrôle non destructif Thermographie infrarouge Ultrasons Emission acoustique Hyperfréquences Impédance mécanique acoustique. Index. décimale : 620.19 Autres matériaux Résumé : DCN utilise les matériaux composites pour la fabrication de ponts passerelles de sous-marins, bâtiments de surface antimines, superstructures de frégates, dômes sonar, revêtements d'arbres porte-hélices. Le CESMAN (Centre d'Expertise des Structures et MAtériaux Navals) développe donc de nombreuses techniques de contrôle non destructif adaptées à ces matériaux de type monolithique ou sandwich. Les méthodes les plus utilisées sont la thermographie infrarouge, les ultrasons, les hyperfréquences, l'émission acoustique, l'impédance acoustique et mécanique. Cet article présente les matériaux utilisés par DCN avec le type de défauts recherchés et donne des exemples variés d'applications. DOI : 10.3166/rcma.17.207-216 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6152
in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES > Vol. 17, N° 2 (05-06-07-08/2007) . - p. 207-216[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011540 - Périodique Bibliothèque principale Documentaires Disponible An integrated approach towards the study of scratch damage of polymers / G. T. Lim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)
[article]
Titre : An integrated approach towards the study of scratch damage of polymers Type de document : texte imprimé Auteurs : G. T. Lim, Auteur ; H. J. Sue, Auteur ; J. N. Reddy, Auteur ; M. H. Wong, Auteur Année de publication : 2005 Article en page(s) : p. 361-369 Note générale : Bibliogr. Langues : Américain (ame) Tags : Propriété mécanique Etude expérimentale Méthode élément fini Modélisation Analyse surface Essai dureté par rayage mesure Endommagement Dureté Résistance rayure Thermoplastique Propène polymère Carbonate Index. décimale : 667.9 Revêtements et enduits Résumé : To seek a better understanding of the scratch damage of polymers, an integrated analysis approach is proposed in this article. This integrated approach essentially involves (a) the use of a new scratch test device for testing, (b) employing microscopy techniques and image an analysis tool, VIEEW®, for studying material damage and scratch visibility, and finally (c) performing finite element (FE) modeling to examine the mechanical response of the polymeric substrate involved during the scratch process. Applying this approach to five model material systems and employing linearly increasing load tests, the findings of the fundamental material science study of the scratch damage of these materials are presented. From the three-dimensional FE analysis, the numerical results generated were able to reasonably predict the scratch damage and provide corresponding mechanistic interpretation. The essential link between material science and mechanics outlines the uniqueness of this approach for studying the scratch damage of polymers. DOI : 10.1007/s11998-005-0004-z En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-005-0004-z.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3726
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 5 (01/2005) . - p. 361-369[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000589 - Périodique Bibliothèque principale Documentaires Disponible Anticipating paint cracking / Mark E. Nichols in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)
[article]
Titre : Anticipating paint cracking : The application of fracture mechanics to the study of paint weathering Type de document : texte imprimé Auteurs : Mark E. Nichols, Auteur Année de publication : 2002 Article en page(s) : p. 39-46 Note générale : bibliogr. Langues : Américain (ame) Tags : Essai vieillissement Mécanique rupture Fissuration Feuil Exposition intempérie Dégradation Industrie automobile Vernis Peinture Matériau revêtement Index. décimale : 667.9 Revêtements et enduits Résumé : The relationships between the fracture energy (Gc), film thickness, stress level, and weathering time were investigated for a number of automotive clearcoats. As weathering progressed, most clearcoats embrittled due to the combined effects of photooxidation, hydrolysis, and other degradation mechanisms. This embrittlement was measured and related to the chemical composition changes that take place in the clearcoat during weathering. When the fracture energy dropped below the driving energy for cracking, G, brittle cracking occurred. The driving force for cracking was shown to depend on stress level and film thickness. The importance of fatigue loading was also qualitatively investigated. These techniques were successfully used to anticipate the long-term weathering behavior of automative clearcoats. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5679
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 74, N° 924 (01/2002) . - p. 39-46[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 001233 - Périodique Bibliothèque principale Documentaires Disponible 001232 - Périodique Bibliothèque principale Documentaires Disponible Attaining durable painted plastic components / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)
PermalinkCationic, thermally cured coatings using epoxidized soybean oil / Ramya Raghavachar in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)
PermalinkChitosan-hybridized acrylic resins prepared in emulsion polymerizations and their application as interior finishing coatings / Tamaki Wada in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)
PermalinkCycloaliphatic polyester based high solids polyurethane coatings / Hai Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)
PermalinkEffect of crosslinker reaction rate on film properties for thermoset coatings / Ward T. Brown in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)
PermalinkEffect of particle size distribution on the performance of two-component water-reducible acrylic polyurethane coatings using tertiary polyisocyanate crosslinkers / Denise E. Fiori in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)
PermalinkEffect of plasticizer on the thermal, mechanical, and anticorrosion properties of an epoxy primer / M. T. Rodriguez in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)
PermalinkEffects of model coal tar components on adhesion strength of polyurethane coating on steel plate / Naoki Yokoyama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)
PermalinkElucidation of polyurethane dispersions in a batch rotor-stator mixer / Supathorn Phongikaroon in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)
PermalinkFracture toughness of inorganic-organic hybrid coatings / R. L. Ballard in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)
PermalinkHydrophobic coatings from emulsion polymers / D. R. Bassett in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)
PermalinkInfluence of drier combination on through-drying in waterborne alkyd emulsion coatings observed with magnetic resonance profiling / J. Mallégol in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)
PermalinkLaser-assisted thermoplastic tape laying / Christian Brecher in JEC COMPOSITES MAGAZINE, N° 56 (04/2010)
PermalinkLow VOC carbamate functional coatings compositions for automotive topcoats / Marvin L. Green in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 918 (07/2001)
PermalinkMatériaux à base de caoutchoucs pour joints et membranes destinés aux appareils à gaz et appareillages pour le gaz - Norme NF EN 549 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1995)
PermalinkMeasurement approaches to develop a fundamental understanding of scratch and mar resistance / Mark R. van Landingham in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)
PermalinkMeasurement of mar resistance and study of marring mechanism of polymeric coatings with scanning probe microscope / Weidian C. Shen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)
PermalinkMechanical property changes and degradation during accelerated weathering of polyester-urethane coatings / allen Skaja in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)
PermalinkMetrology for characterizing scratch resistance of polymer coatings / Li-Piin Sung in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)
PermalinkMonte Carlo approach to estimating the photodegradation of polymer coatings / Brian R. Hinderliter in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)
PermalinkMorphology of hybrid coatings based on polyester, melamine resin, and silica and the relation with hardness and scratch resistance / S. Frings in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 901 (02/2000)
PermalinkNano-mechanical properties and topography of thermosetting acrylic powder coatings / D. C. Andrei in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)
PermalinkNanostructured polyurethane ceramer coatings for aircraft / Mark D. Soucek in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)
PermalinkNew polymeric polyol for thermoset coatings / J. Frederic Walker in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)
PermalinkNovel coatings based on mixtures of blown soybean oil and acrylate prepolymers / Pehong Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)
PermalinkNovel coatings from soybean oil phosphate ester polyols / Bin Zhong in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 915 (04/2001)
PermalinkNovel polyurethane coating technology through glycidyl carbamate chemistry / Peter A. Edwards in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)
PermalinkOil modified and waterborne polyurethane resin / G. Gündüz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 931 (08/2002)
PermalinkOverblasting effects on surface properties of low-carbon steel / A. W. Momber in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)
PermalinkPolymer diffusion and mechanical properties of films prepared from crosslinked latex particles / Patrick Pinenq in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)
PermalinkPolyorthoesters for low-VOC coatings / Hisashi Isaka in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 937 (02/2003)
PermalinkProperties of powder coatings in load carrying construction / Daniel Stahlberg in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)
PermalinkReduction of soil resistance through the use of a composite coating / Xian Jia in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)
PermalinkScratch durability of automotive clear coatings : A quantitative, reliable and robust methodology / Vincent Jardret in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)
PermalinkScratch resistance behavior of automotive plastic coatings / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 925 (02/2002)
PermalinkScratch resistance behavior of model coating systems / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)
PermalinkStructure/property relationships in flexible alkoxysilane automotive coatings / Phillip V. Yaneff in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)
PermalinkStudy of film properties of some urethane oils / F. Seniha Güner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 929 (06/2002)
PermalinkSurface rearrangement of tailored polyurethane-based coatings / Mariëlle Wouters in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)
PermalinkSynergistic effect of driers on soybean oil-based ceramer coatings / David Deffar in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 919 (08/2001)
PermalinkThermal and mechanical properties of UV - cured acrylated hyperbranched polyester and its blends with linear polyurethane acrylate / Wei Huanyu in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)
PermalinkUse of poly (2-vinylpyridine)-b-poly(e-caprolactone) copolymers as pigment stabilizers in powder coatings / F. L. Duivenvoorde in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 931 (08/2002)
PermalinkUV-radiation curing of waterborne acrylate coatings / C. Decker in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)
PermalinkA variable radius roll adhesion test (VaRRAT) suitable for measuring the adhesion of paint to metal / Damien Jinks in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 926 (03/2002)
PermalinkVisco-elastic visco-plastic analysis of scratch resistance of organic coatings / Vincent Jardret in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)
Permalink