83 résultat(s) recherche sur le tag 'surface'

Surface functionalization of polymer nanofibers by ITO sputter coating / Qufu Wei in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 4 (07/2010)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 7, N° 4 (07/2010) . - p. 511-514 Titre : Surface functionalization of polymer nanofibers by ITO sputter coating Type de document : texte imprimé Auteurs : Qufu Wei, Auteur ; Huifeng Wang, Auteur ; Yang Xu, Auteur ; Bingyao Deng, Auteur Année de publication : 2010 Article en page(s) : p. 511-514 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Etain Microscopie à force atomique Nanoparticules Oxyde d'indium L'oxyde d'indium(III) (In2O3) est un composé chimique, un oxyde amphotère d'indium. (Wikipedia) Polyamide 6 Revêtements:Peinture Surfaces (technologie) Tags : Revêtement  'Etain  enduit  d'oxyde  indium'  Pulvérisation  Surface  Nanofibres Index. décimale : 667.9 Revêtements et enduits Résumé : In this study, transparent conductive films of tin-doped indium oxide (ITO) were deposited onto the polyamide 6 (PA6) nanofiber substrates at room temperature. Atomic force microscopy (AFM) was employed to study the morphology of the nanofibers, respectively. The AFM results indicated a significant change in the morphology of the nanofibers before and after the ITO sputter coatings. The light transmittance and surface conductivity of the ITO-deposited nanofibers were also investigated. It was found that the surface resistivity of the PA6 nanofiber with the ITO deposition had a significant drop and the ITO deposition obviously affected the light transmittance of the PA6 nanofibers. DOI : 10.1007/s11998-009-9207-z En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-009-9207-z.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=9774 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
012362	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Surface rearrangement of tailored polyurethane-based coatings / Mariëlle Wouters in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 6 (04/2005) . - p. 435-443 Titre : Surface rearrangement of tailored polyurethane-based coatings Type de document : texte imprimé Auteurs : Mariëlle Wouters, Auteur ; Teun Vereijken, Auteur ; Frank Huijs, Auteur ; Joyce van Zanten, Auteur Année de publication : 2005 Article en page(s) : p. 435-443 Note générale : Bibliogr. Langues : Américain (ame) Tags : Réarrangement  surface  Structure  moléculaire  Caoutchouc  thermoplastique  Propriété  mécanique  Etude  expérimentale  Dureté  Résistance  rayure  Analyse  Milieu  aqueux  Immersion  Densité  réticulation  Relation  structure  propriété  Angle  contact  composition  Polymère  fluor  Matériau  revêtement  Uréthanne  élastomère Index. décimale : 667.9 Revêtements et enduits Résumé : Polyurethane coatings with different network composition were prepared from an oligomeric diol, a diisocyanate, and a low molecular weight triol. The glass transition temperature of the network was tuned by the ratio of diol and triol and the composition (aromatic or aliphatic) of the diisocyanate. All coatings were studied for their bulk properties as well as their surface properties. It was found that by the addition of a fluorinated additive the surface free energy of the coating was lowered by approximately 15 mN.m-1, leaving the bulk properties intact. It was also shown that these polyurethane coatings are able to adapt their surface free energy in a reversible manner when exposed to water. The magnitude and rate of surface rearrangement is strongly dependent on the network density of the coating. DOI : 10.1007/BF02733886 En ligne : https://link.springer.com/content/pdf/10.1007%2FBF02733886.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3838 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001483	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Suivi in situ des réactions de surface par spectroscopie de photoémission induite par rayons X / François Rochet in L'ACTUALITE CHIMIQUE, N° 356-357 (10-11/2011)  

[article]  inL'ACTUALITE CHIMIQUE > N° 356-357 (10-11/2011) . - p. 29-33 Titre : Suivi in situ des réactions de surface par spectroscopie de photoémission induite par rayons X Type de document : texte imprimé Auteurs : François Rochet, Auteur ; Jean-Jacques Gallet, Auteur ; Fabrice Bournel, Auteur ; Fausto Sirotti, Auteur Année de publication : 2011 Article en page(s) : p. 29-33 Note générale : Bibliogr. Langues : Français (fre) Catégories : Rayonnement synchrotron Spectroscopie de photoélectrons Surfaces (Physique) Tags : Réactivité  Surface  'Rayonnement  synchrotron'  'Spectroscopies  électroniques'  'Mesures  in  situ'  'Temps  réel'  'Pression  proche  amiante Index. décimale : 539.2 Rayonnement Résumé : Cet article présente les avancées récentes de la spectroscopie de photoémission induite par rayons X (XPS) dans le suivi des réactions de surface en temps réel à une échelle sub-seconde, et en présence d'une phase gazeuse, jusqu'à des pressions proches de l'ambiante. Ces progrès sont illustrés par des exemples tirés d'expériences récemment réalisées auprès de sources de lumière synchrotron, en soulignant les perspectives nouvelles qui s'ouvrent en catalyse et en chimie environnementale. En ligne : https://new.societechimiquedefrance.fr/numero/suivi-in-situ-des-reactions-de-sur [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12538 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
13461	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Performance of paint systems after UHP (part 3) / Philippe Le Calvé in PROTECTIVE COATINGS EUROPE (PCE), Vol. 4, N° 1 (01-02-03/2012)

[article]  inPROTECTIVE COATINGS EUROPE (PCE) > Vol. 4, N° 1 (01-02-03/2012) . - p. 38-47 Titre : Performance of paint systems after UHP (part 3) Type de document : texte imprimé Auteurs : Philippe Le Calvé, Auteur ; Jean-Pierre Pautasso, Auteur Année de publication : 2012 Article en page(s) : p. 38-47 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique. L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1. C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple. Anticorrosion Atmosphère marine Corrosion Essais (technologie) Métaux -- Nettoyage Traîtements de surface Tags : 'Surface  métallique'  Acier  'Nettoyage  eau  ultra-haute  pression'  'Préparation  surface  avant  peinture' Index. décimale : 667.9 Revêtements et enduits Résumé : Surface preparation processes influence the performance and lifetime of coating systems applied to steel substrates. The state of the steel surface immediately prior to painting is crucial and the main factors influencing the performance are the presence of rust and mill scale, surface contaminants including dust, salts and grease, surface profile. For aggressive environments such as marine atmospheres of C5M corrosivity category and high-performance coatings that require cleaner and/or rougher surfaces, blast cleaning is often the preferred method of surface preparation. However, it is well known that abrasive cleaning can produce a considerable amount of waste mainly containing blasting media, old removed paint and rust products. As an alternative to abrasive cleaning for maintenance work or complete renovation, ultra high pressure (UHP) waterjetting is becoming common as long as the performances of the coatings on steel structures are not affected. UHP waterjetting technology has been described intensively in previous papers. There are however questions about its suitability for new (naval) constructions. Due to this, a project was started with the purpose of reinforcing the knowledge on the behaviour of different paint systems for highly corrosive marine environments (C5M) and more particularly assessing UHP waterjetting performance in relation to abrasive blasting on steel coated with a zinc-rich shop primer (ZRP). In the first stage of the study, the characterisation of surfaces after UHP waterjetting of shop primet steel surfaces was reported in the april/june 2011 issue of PCE, and in the second part (reported in july/sep 2011 issue of PCE), the performance of 7 paint systems applied on UHP (DHP 4) treated ZRP coated steel flat panels and welded panels was studied in laboratory and field tests. The results were compared with conventional abrasive blasted (Sa 2.5 MG) surfaces. It was concluded that UHP waterjetting was a promising technique for steel surface preparation within the scope of new constructions (on ZRP coated steel). The results showed a comparable behaviour of UHP waterjetting with standard surfaces after abrasive blasting. Despite a slight difference in the roughness compared to abrasive blasting, coating performance did not seem to be affected. However, some results remained inconclusive regarding welded panels as a consequence of inhomogeneous weld area. In this article, the authors describe the third and final part of the study which involved testing three paint systems over UHP waterjetted ZRP panels, including more representative welded panels, compared to conventional grit blast treated panels. Note de contenu : - Experimental conditions - Test panels, surface preparation and coating - Artificial ageing test and field test - Assessments : visual assessment - Pull-off adhesion test - Assessment requirements - Results : Cyclic corrosion test C5M - Natural ageing Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=13626 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
13694	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Bake oven induced variation of surface chemistry on electrocoat paint / Larry P. Haack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

[article]  inJOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 72, N° 903 (04/2000) . - p. 63-70 Titre : Bake oven induced variation of surface chemistry on electrocoat paint : Effect on primer-electrocoat intercoat adhesion Type de document : texte imprimé Auteurs : Larry P. Haack, Auteur ; Joseph W. Holubka, Auteur Année de publication : 2000 Article en page(s) : p. 63-70 Note générale : Bibliogr. Langues : Américain (ame) Tags : Matériau  revêtement  Peinture  Multicouche  Durcissement  Cuisson  au  four  Propriété  surface  Adhérence  Interface  Dépôt  électrophorèse  Etude  expérimentale Index. décimale : 667.9 Revêtements et enduits Résumé : The interplay of bake oven processing environment and surface/interfacial chemistry, and their effect on intercoat adhesion has been investigated for a model primer/electrocoat paint system. X-ray photoelectron spectroscopy (XPS) surface analysis established that a prominent ether component in the C is core level spectrum correlated with a polyether-based crater-control additive in the electrocoat that surface-segregates during cure. Laboratory-simulated bake oven experiments confirmed that better adhesion characteristics were realized by removal of this electrocoat overlayer through reaction with nitrogen oxides and high levels of moisture present in the cure environment of production direct-fired ovens. Details of the effect of bake oven atmosphere on cure chemistry for direct-fired versus indirect-fired ovens are presented. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5817 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001208	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Change in surface chemistry of the cuticle of human hair by chemical and photochemical oxidation / Sigrid B. Ruetsch in IFSCC MAGAZINE, Vol. 7, N° 4 (10-11-12/2004)

Permalink

Combinatorial materials research applied to the development of new surface coatings XI : a workflow for the development of hybrid organic–inorganic coatings / Bret J. Chisholm in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 1 (01/2010)  

Permalink

A comparative analysis between different ether carboxylic acids with respect to wettability and surface topography of abrasively treated polyester fabrics / V. Dutschk in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 44, N° 6/2007 (12/07)

Permalink

Determination of optimal cream formulation from long-term stability investigation using a surface response modelling / N. Moulai Mostefa in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 28, N° 3 (06/2006)  

Permalink

How does waterjet cleaning affect the surface and surface preparation ? / Lydia M. Frenzel in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 27, N° 1 (01/2010)  

Permalink

Looking into special surface effects : diffuse coarseness and glint impression / Zihao Winston Wang in COLORATION TECHNOLOGY, Vol. 132, N° 2 (04/2016)  

Permalink

Nanostructured silicon sol-gel surface treatments for Al 2024-T3 protection / A. J. Vreugdenhil in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 915 (04/2001)

Permalink

Octanol-water partition coefficients of surfactants : slow stirring/surface tension method / D. J. Miller in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 47, N° 1/2010 (01-02/10)

Permalink

Overblasting effects on surface properties of low-carbon steel / A. W. Momber in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Technique du profil de la surface cutanée / J. Hatzis in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 13, N° 6 (12/1991)  

Permalink

The influence of nanoadditives on surface, permeability and mechanical properties of self-organized organic–inorganic nanocomposite coatings / Milena Spírková in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 2 (03/2010)  

Permalink

Two-dimensional spin coating with a vertical centrifugal force and the effect of artificial gravity on surface leveling / Soroosh Mahmoodi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 6 (11/2016)  

Permalink

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings / Li-Piin Sung in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Influence des traitements chimiques sur les propriétés de surfaces des fibres de lin / Frédéric Busnel in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 16, N° 1 (01-02-03-04/2006)

Permalink

Prospects for assessing the adhesive performance of coatings by non-destructive methods / J. A. Graystone in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 88, B3 (09/2005)  

Permalink

A new method to measure in vivo human skin hydrophobia / A. Elkhyat in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 23, N° 6 (12/01)  

Permalink

Fibres de carbone et matériaux composites / Pierre Delhaes in L'ACTUALITE CHIMIQUE, N° 295-296 (03-04/2006)  

Permalink

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés. Evaluation visuelle de la propreté d'un subjectile - Norme NF EN ISO 8501-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2007)

Permalink

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés. Evaluation visuelle de la propreté d'un subjectile - Norme NF EN ISO 8501-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)

Permalink

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés. Evaluation visuelle de la propreté d'un subjectile - Norme NF EN ISO 8501-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)

Permalink

Accelerated weathering of wood surfaces coated with multifunctional alkoxysilanes by sol-gel deposition / Mandla A. Tshabalala in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 943 (08/2003)  

Permalink

Advances in emulsion polymerization for coatings applications / Mohamed S. El-Aasser in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Associative polymer/latex dispersion phase diagrams. II : HASE thickeners / Edward Kostansek in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Attaining durable painted plastic components / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Biologically Active Tin Compounds Based on Aziridine and Azepane Derivatives / H. El-sharkawy Ali in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 45, N° 2/2008 (03-04/08)

Permalink

Charge density alterations in human hair fibers : an investigation using electrostatic force microscopy / Valeria Moares Longo in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 28, N° 2 (04/2006)  

Permalink

Coloration of polypropylene with interference pigment and the effect of wetting agents on its optical properties / Ramanand N. Jagtap in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Conductivity measurements as a method for studying ionic technical grade surfactants / E. Carey in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 45, N° 3/2008 (05-06/08)

Permalink

Cuticular damage to african-american hair during relaxer treatments - A microfluorometric and SEM study - / Sigrid B. Ruetsch in IFSCC MAGAZINE, Vol. 11, N° 2 (04-05/2008)

Permalink

Detrended fluctuation analysis of UV degradation in a polyurethane coating / Mark A. Johnson in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 941 (06/2003)

Permalink

Development of leachable enalapril tablets by controlled porosity osmotic pump technique ; a unique approach to enhance its sustained release effect / Muhammad Faheem Akhtar in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 2 (03/2022)  

Permalink

Electrodeposition behavior of zinc–nickel–iron alloys from sulfate bath / Mortaga M. Abou-Krisha in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 6, N° 3 (09/2009)  

Permalink

Formation and characteristics of Al-Zn hydrotalcite coatings on galvanized steel / R. G. Buchheit in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Image analysis as a tool for measuring biological phenomena of the skin / S. P. Barton in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 10, N° 3 (06/88)  

Permalink

Innovative, gemini-type molecular defoamer technology for improved coating aesthetics / Ernie C. Galgoci in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Interaction of rheology, geometry, and process in coating flow / Richard R. Eley in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Metrology for characterizing scratch resistance of polymer coatings / Li-Piin Sung in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures - an AFM study / Xiaohong Gu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Monte Carlo approach to estimating the photodegradation of polymer coatings / Brian R. Hinderliter in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Nano-mechanical properties and topography of thermosetting acrylic powder coatings / D. C. Andrei in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Nanotechnology and coatings Q & A / Vinayak M. Natu in PAINTINDIA, Vol. LVIII, N° 8 (08/2008)

Permalink

New instrument for measuring water vapor flux density from arbitrary surfaces / R. E. Imhof in IFSCC MAGAZINE, Vol. 5, N° 4 (10-11-12/2002)

Permalink

Novel, water-based fluorinated polymers with excellent antigraffiti properties / Jurgen Scheerder in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Properties of powder coatings in load carrying construction / Daniel Stahlberg in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Reduction of soil resistance through the use of a composite coating / Xian Jia in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Relating gloss loss to topographical features of a PVDF coating / Jenny Faucheu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Rheological approach to the capillary penetration of coating into wood / Mari de Meijer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 914 (03/2001)

Permalink

Role of topical and nutritional supplement to modify the oxidative stress / P. Morganti in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 24, N° 6 (12/2002)  

Permalink

Study of Causal Factors of Dark Circles Around the Eyes / Masayuki Matsumoto in IFSCC MAGAZINE, Vol. 4, N° 4 (10-11-12/2001)

Permalink

Study of infrared thermal images of chameleon - type building coatings / Yiping Ma in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 940 (05/2003)

Permalink

Synthesis of 1,3-Bis-[(Dodecanoyl Oxypropyl Dimethylammonium) Propane] Dibromide Ester-Quat Surfactant: Micellar, Thermodynamic and Corrosion-Inhibiting Properties / S. Alehyen in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 44, N° 3/2007 (06-07/07)

Permalink

Unifying model for associative thickener influences on waterborne coatings : II. Competitive adsorption of nonionic surfactants and HEUR thickeners on titanium dioxide pretreated with inorganic stabilizers and organic oligomeric dispersants / Ming-Ren Tarng in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 935 (12/2002)

Permalink

Use of a chemically modified clay as a replacement for silica in matte coated ink-jet papers / James Edwin Cawthorne in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 937 (02/2003)

Permalink

Using dispersion/flocculation phase diagrams to visualize interactions of associative polymers, latexes, and surfactants / Edward Kostansek in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 940 (05/2003)

Permalink

Waterborne latex coatings of color : I. Component influences on viscosity decreases / David M. Mahli in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Les alkylpolyglucosides : une nouveauté en matière de soin et de tolérance / Jörg Kahre in PARFUMS COSMETIQUES ACTUALITES, N° 131 (11/1996)

Permalink

An integrated approach towards the study of scratch damage of polymers / G. T. Lim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Choosing effective dispersants for high-solids coatings / W. Joudrey in PAINTINDIA, Vol. XLVI, N° 8 (08/1996)

Permalink

Effects of model coal tar components on adhesion strength of polyurethane coating on steel plate / Naoki Yokoyama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Electrochemical study of lap-joint corrosion of steel with metallic coatings / A. Bautista in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Evaluating barrier properties of organic coatings by water permeation and electrochemical methods / P. C. Inone in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)

Permalink

Evaluation of steel/primer based on chestnut tannin/paint film systems by EIS / S. Hornus Sack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 926 (03/2002)

Permalink

Gels douches : place aux sens / Françoise Basset in PARFUMS COSMETIQUES ACTUALITES, N° 183 (06-07/2005)

Permalink

In vitro evaluation of sun protection factors of sunscreen agents using a novel UV spectrophotometric technique / M. D. Bleasel in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 30, N° 4 (08/2008)  

Permalink

Infrared spectroscopy of the skin : influencing the stratum corneum with cosmetic products / Th. Prasch in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 22, N° 5 (10/2000)  

Permalink

Latex produced with carboxylic acid comonomer for waterborne coatings : Particle morphology variations with changing pH / Daisuke Fukuhara in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Méthodes d'analyse du vieillissement cutané / R. Marks in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 12, N° 4 (08/1990)  

Permalink

New anti-corrosive painting technologies at the beginning of the 21st century / E. Almeida in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 911 (12/2000)

Permalink

Nouveau tensio-actif pour produits de toilette / Branko Sajic in PARFUMS COSMETIQUES AROMES, N° 115 (02-03/94)

Permalink

Numerical identification of bulk behavior law of manganese phosphate coatings. comparison with tribological properties / Ph. Hivart in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 942 (07/2003)

Permalink

Optimization and performance analysis of copper immersion coating on AZ91 magnesium alloy / Lianxi Yang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

A perspective on the history of and current research in surfactant-modified, water-soluble polymers / J. Edward Glass in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)

Permalink

Polysaccharide matriciel à effet seconde peau / Sophie. Leclère in PARFUMS COSMETIQUES ACTUALITES, N° 174 (12/2003)

Permalink

Stabilization of aluminum pigment in waterborne paints / Bodo Müller in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Surfactant behavior and its influence on the viscosity of associative thickeners solutions, thickened latex dispersions, and waterborne latex coatings / David M. Mahli in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 938 (03/2003)

Permalink

Tensioactifs naturels : sucroesters et APG en forte croissance / X.-V. Gauthier in PARFUMS COSMETIQUES ACTUALITES, N° 139 (02-03/1998)

Permalink

Waterborne latex coatings of color : II. Surfactant influences on color development and viscosity / David M. Mahli in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Wood properties affecting finish service life / R. Sam Williams in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)

Permalink