116 résultat(s) recherche sur le tag 'expérimentale'

Acid etch of automotive clearcoats. II. Comparison of degradation chemistry in laboratory and field testing / P. J. Schmitz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)

[article]  inJOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 72, N° 902 (03/2000) . - p. 53-61 Titre : Acid etch of automotive clearcoats. II. Comparison of degradation chemistry in laboratory and field testing Type de document : texte imprimé Auteurs : P. J. Schmitz, Auteur ; Joseph W. Holubka, Auteur ; Li - Feng Xu, Auteur Année de publication : 2000 Article en page(s) : p. 53-61 Note générale : Bibliogr. Langues : Américain (ame) Tags : Matériau  revêtement  Vernis  Automobile  Dégradation  chimique  Exposition  intempérie  Retombée  atmosphérique  Pluie  acide  Essai  laboratoire  en  champ  Etude  comparative  expérimentale  Spectrométrie  photoélectron  Rayon  X Index. décimale : 667.9 Revêtements et enduits Résumé : A laboratory test procedure was developed to quantitatively evaluate the acid etch resistance of automotive clearcoats, Here we attempt to verify that the conditions used in the laboratory test reproduce the field degradation chemistry to assure that the test is evaluating realistic performance characteristics. In this study we applied X-ray photoelectron spectroscopy (XPS) as a tool to determine if degradation products are observable which can be used to verify the consistency of the field and laboratory degradation processes for acrylic melamine-based clearcoats. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5822 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001207	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Advanced testing procedures for high performance coatings / Flavio Deflorian in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

[article]  inJOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 72, N° 908 (09/2000) . - p. 81-87 Titre : Advanced testing procedures for high performance coatings Type de document : texte imprimé Auteurs : Flavio Deflorian, Auteur ; Stefano Rossi, Auteur ; Pier Luigi Bonora, Auteur Année de publication : 2000 Article en page(s) : p. 81-87 Note générale : Bibliogr. Langues : Américain (ame) Tags : Matériau  revêtement  Peinture  anticorrosion  Industrie  automobile  Protection  corrosion  Essai  brouillard  salin  Impédance  électrique  Méthode  électrochimique  Etude  comparative  expérimentale  Spectrométrie  impédance Index. décimale : 667.9 Revêtements et enduits Résumé : In the first part of this work, an integrated approach incorporating electrochemical (electrochemical impedance spectroscopy), calorimetric (differential scanning calorimetry), mechanical (dynamic mechanical thermal analysis), and infrared spectroscopy (Fourier transform infrared spectroscopy) techniques was used to characterize some organic coatings from the automotive industry. Comparison of the results obtained with different techniques allows not only a higher precision in the evaluation of natural or artificial degradation, which is very difficult to obtain using traditional techniques, but also better data interpretation and, therefore, the possibility of understanding the different degradation mechanisms. In the second part, some preliminary results concerning the comparison of salt spray exposure and EIS measurements are discussed. The statistical analysis of the results showed that the degradation mechanism in the two cases is completely different and, therefore, the information which is obtained with the two testing approaches is also different. With EIS measurements obtained in immersion, it is possible to monitor, in particular, the barrier properties of the coatings, which are dominated by the presence of defects. In the case of salt spray (without scratch), the main property to be measured is the loss of adhesion which causes blister formation. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5790 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001213	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Advances in emulsion polymerization for coatings applications / Mohamed S. El-Aasser in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

[article]  inJOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 73, N° 920 (09/2001) . - p. 51-63 Titre : Advances in emulsion polymerization for coatings applications : Latex blends and reactive surfactants Type de document : texte imprimé Auteurs : Mohamed S. El-Aasser, Auteur ; E.-D. Sudol, Auteur ; Victoria L. Dimonie, Auteur ; Eric S. Daniels, Auteur ; Xiaoru Wang, Auteur ; Jiansheng Tang, Auteur Année de publication : 2001 Article en page(s) : p. 51-63 Note générale : Bibliogr. Langues : Américain (ame) Tags : Matériau  revêtement  Peinture  eau  émulsion  Liant  Préparation  Polymérisation  Latex  Mélange  Adjuvant  Agent  surface  Distribution  dimension  particule  Propriété  optique  Feuil  Brillant  Styrène  polymère  Groupe  carboxyle  Etude  expérimentale Index. décimale : 667.9 Revêtements et enduits Résumé : The utilization of latex blends to prepare zero-VOC coatings and the use of reactive surfactants in emulsion polymerization are two advances in waterborne technology that are of increasing interest to coatings formulators. The first part of this paper focuses on an investigation of the influence of the interface between high and two Tg latex particles on the glass and surface morphologies of films obtained from model latex blends. Glass was influenced by the concentration of carboxyl groups present on the surface of the latex particles (optimal concentration for maximum gloss 3% on the high Tg particles), the degree of neutralization of these groups (higher glass with increased extent of neutralization), the type and concentration of the neutralizing base (higher gloss for stronger bases), and the presence of added surfactant (higher gloss with added surfactant). Gloss was found to be correlated with the surface smoothness of the film. The kinetics, particle size, molecular weight, and location of the reactive surfactant after polymerization, as well as the contact angle of films prepared from these latices, are examined in the second part of this paper. The polymerization rate profiles were similar to those obtained using a conventional surfactant ; however, the dependency of the rate on the number of particles was significantly lower. The amount bound increased and the molecular weight decreased with increasing surfactant concentration. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5746 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001228	-	Périodique	Bibliothèque principale	Documentaires	Disponible

An integrated approach towards the study of scratch damage of polymers / G. T. Lim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 5 (01/2005) . - p. 361-369 Titre : An integrated approach towards the study of scratch damage of polymers Type de document : texte imprimé Auteurs : G. T. Lim, Auteur ; H. J. Sue, Auteur ; J. N. Reddy, Auteur ; M. H. Wong, Auteur Année de publication : 2005 Article en page(s) : p. 361-369 Note générale : Bibliogr. Langues : Américain (ame) Tags : Propriété  mécanique  Etude  expérimentale  Méthode  élément  fini  Modélisation  Analyse  surface  Essai  dureté  par  rayage  mesure  Endommagement  Dureté  Résistance  rayure  Thermoplastique  Propène  polymère  Carbonate Index. décimale : 667.9 Revêtements et enduits Résumé : To seek a better understanding of the scratch damage of polymers, an integrated analysis approach is proposed in this article. This integrated approach essentially involves (a) the use of a new scratch test device for testing, (b) employing microscopy techniques and image an analysis tool, VIEEW®, for studying material damage and scratch visibility, and finally (c) performing finite element (FE) modeling to examine the mechanical response of the polymeric substrate involved during the scratch process. Applying this approach to five model material systems and employing linearly increasing load tests, the findings of the fundamental material science study of the scratch damage of these materials are presented. From the three-dimensional FE analysis, the numerical results generated were able to reasonably predict the scratch damage and provide corresponding mechanistic interpretation. The essential link between material science and mechanics outlines the uniqueness of this approach for studying the scratch damage of polymers. DOI : 10.1007/s11998-005-0004-z En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-005-0004-z.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3726 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
000589	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Analyse de la texture des produits pulvérulents / Christophe Lanos in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

[article]  inLES CAHIERS DE RHEOLOGIE > Vol. XV, N° 4 (10/1997) . - p. 21-30 Titre : Analyse de la texture des produits pulvérulents Type de document : texte imprimé Auteurs : Christophe Lanos, Auteur ; A. Vuez, Auteur Année de publication : 1997 Article en page(s) : p. 21-30 Note générale : Bibliogr. Langues : Français (fre) Tags : Propriété  rhéologique  Matériau  granulaire  Poudre  Argile  Pâte  céramique  Sable  Kaolin  Cellulose  Pressage  Essai  compression  Critère  plasticité  Etude  expérimentale Index. décimale : 532.05 Mécanique des fluides et des liquides - Dynamique (cinétique et cinématique) Résumé : L'exploitation de la solution analytique connue dans le cas de la compression simple d'un fluide plastique parfait conduit à une méthode d'identification du critère de plasticité associé à des pâtes ou à des produits pulvérulents. Cette dernière est appliquée sur des résultats d'essais sur une pâte céramique, sur du sable et sur de la poudre d'argile sèche afin de discuter et valider la méthode. En considérant une analogie entre le test de compression et le test de pressage, la caractérisation du comportement des poudres devient possible à l'aide d'un test de compression sous confinement. L'exploitation d'essais de pressage réalisés sur des poudres de celluloses illustre la démarche. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5701 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
002127	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Analytical investigations on acrylic polyurethane hybrid - dispersions / H. Kagerer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 927 (04/2002)

Permalink

Associative polymer/latex dispersion phase diagrams. II : HASE thickeners / Edward Kostansek in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Atmospheric corrosion behavior of paint systems applied on weathered hot-dip galvanized steel / D. de La Fuente in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 935 (12/2002)

Permalink

Attaining durable painted plastic components / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Bake oven induced variation of surface chemistry on electrocoat paint / Larry P. Haack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Cationic uv-cured coatings containing epoxidized soybean oil initiated by new onium salts containing tetrakis (pentafluorophenyl) gallate anion / Haiyan Gu in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 927 (04/2002)

Permalink

Cerium acetate-modified aminopropylsilane triol : A precursor of corrosion-preventing coating for aluminum-finned condensers / T. Sugama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Changes in composition and characteristics of latex paints applied on porous inorganic substrates / Dan Y. Perera in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 919 (08/2001)

Permalink

Chemical depth profiling of automotive coating systems using slab microtome sectioning with IR/UV-VIS spectroscopy and optical microscopy / Karlis Adamsons in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)

Permalink

Chitosan-hybridized acrylic resins prepared in emulsion polymerizations and their application as interior finishing coatings / Tamaki Wada in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Coating evaluation and validation of accelerated test conditions using an in-situ corrosion sensor / G. D. Davis in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 935 (12/2002)

Permalink

Colorant-induced exterior discoloration of latex paints / Lakshmi Sadasivan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Coloration of polypropylene with interference pigment and the effect of wetting agents on its optical properties / Ramanand N. Jagtap in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Comparison of methods to assess pigment dispersion / Sang T. Van in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 923 (12/2001)

Permalink

Cycloaliphatic polyester based high solids polyurethane coatings / Hai Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)

Permalink

Development of low temperature curing, 120°C, durable, corrosion protection powder coatings for temperature sensitive substrates / Glen Merfeld in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Durability of powder-coated hot-dip galvanized steel / H. G. J. M. Verstappen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 930 (07/2002)

Permalink

Effect of carbon black on adhesion to plastics in solventborne 2K polyurethanes / Kalpana S. Katti in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Effect of crosslinker reaction rate on film properties for thermoset coatings / Ward T. Brown in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Effect of extenders with narrow and broad particle size distributions on the properties of coatings / Rüdiger Werner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Effect of particle size distribution on the performance of two-component water-reducible acrylic polyurethane coatings using tertiary polyisocyanate crosslinkers / Denise E. Fiori in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)

Permalink

Effect of plasticizer on the thermal, mechanical, and anticorrosion properties of an epoxy primer / M. T. Rodriguez in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Effects of model coal tar components on adhesion strength of polyurethane coating on steel plate / Naoki Yokoyama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Effects of reaction conditions on the formation of poly(2-vinylpyridine) coatings by electropolymerization / Xiaoping Ling in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

Permalink

Effects of thickness and substrate on the mechanical properties of hard coatings / Zenghu Han in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Elucidation of polyurethane dispersions in a batch rotor-stator mixer / Supathorn Phongikaroon in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Etude du phénomène de démétallisation des condensateurs basse tension au polypropylène / Jean-François Poble / 1980

Permalink

Evaluating barrier properties of organic coatings by water permeation and electrochemical methods / P. C. Inone in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)

Permalink

Evaluation of alkane sulfonic acid catalysts and derivatives for curing activity in a melamine/acrylic polyol coating formulation using Fourier transform infrared spectroscopy / Dana Garcia in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

Permalink

Evaluation of steel/primer based on chestnut tannin/paint film systems by EIS / S. Hornus Sack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 926 (03/2002)

Permalink

Formation and characteristics of Al-Zn hydrotalcite coatings on galvanized steel / R. G. Buchheit in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Formulation and testing of a waterborne primer containing chestnut tannin / O. Pardini in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)

Permalink

Fracture toughness of inorganic-organic hybrid coatings / R. L. Ballard in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)

Permalink

Hydrothermal degradation study of phenolic polymer coatings by advanced analytical methods / T. Sugama in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Imaging ellipsometry study of multi-layer microflakes / H. Rafla-Yuan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)

Permalink

Improving pigment dispersing in powder coatings with block copolymer dispersants / Francis L. Duivencoorde in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)

Permalink

Influence of coating system composition on moisture dynamic performance of coated wood / J. Ekstedt in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 938 (03/2003)

Permalink

Influence of drier combination on through-drying in waterborne alkyd emulsion coatings observed with magnetic resonance profiling / J. Mallégol in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)

Permalink

Influence of extender type of performance of modified lamellar zinc primers / Carlos A. Giudice in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Innovative, gemini-type molecular defoamer technology for improved coating aesthetics / Ernie C. Galgoci in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Isocyanate - free moisture cure coatings / Jamil A. Baghdachi in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Latex produced with carboxylic acid comonomer for waterborne coatings : Particle morphology variations with changing pH / Daisuke Fukuhara in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Long-term weathering behavior of UV-curable clearcoats : Depth profiling of photooxidation, UVA, and HALS distributions / Christopher M. Seubert in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Mass transport mechanism for the formation of latex-modified epoxy coatings by evaporation from aqueous dispersions / Sidney L. Phillips in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Measurement approaches to develop a fundamental understanding of scratch and mar resistance / Mark R. van Landingham in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Measurement of mar resistance and study of marring mechanism of polymeric coatings with scanning probe microscope / Weidian C. Shen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)

Permalink

Mechanical property changes and degradation during accelerated weathering of polyester-urethane coatings / allen Skaja in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Mechanism for environmental etch of acrylic melamine - based automotive clearcoats : identification of degredation / P. J. Schmitz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Metrology for characterizing scratch resistance of polymer coatings / Li-Piin Sung in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures - an AFM study / Xiaohong Gu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Morphology of hybrid coatings based on polyester, melamine resin, and silica and the relation with hardness and scratch resistance / S. Frings in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 901 (02/2000)

Permalink

Nano-mechanical properties and topography of thermosetting acrylic powder coatings / D. C. Andrei in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Natural weathering performance of exterior wood coatings on pinus sylvestris and pinus radiata in Germany and New Zealand / Bernard S. W. Dawson in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

New polymeric polyol for thermoset coatings / J. Frederic Walker in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)

Permalink

A new rheometer for the extensional properties of viscoelastic liquids / D. Della Valle in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

Novel coatings based on mixtures of blown soybean oil and acrylate prepolymers / Pehong Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Novel coatings from soybean oil phosphate ester polyols / Bin Zhong in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 915 (04/2001)

Permalink

Novel polyurethane coating technology through glycidyl carbamate chemistry / Peter A. Edwards in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Novel synthesis of carboxy - functional soybean acrylic - alkyd resins for water - reducible coatings / Changchun Wang in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Novel, water-based fluorinated polymers with excellent antigraffiti properties / Jurgen Scheerder in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Oil modified and waterborne polyurethane resin / G. Gündüz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 931 (08/2002)

Permalink

On the use of the atomic force microscope to monitor physical degradation of polymeric coating surfaces / Mark R. VanLandingham in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 923 (12/2001)

Permalink

Optimization and performance analysis of copper immersion coating on AZ91 magnesium alloy / Lianxi Yang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Organic oligomers in aqueous environments / J. David Nordstrom in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 2 (04/2004)  

Permalink

Overblasting effects on surface properties of low-carbon steel / A. W. Momber in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Patterns of erosion from acrylic and fluoropolymer coatings in accelerated and natural weathering tests / Kurt A. Wood in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)

Permalink

Performance of coil coating primers / C. Lowe in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)

Permalink

Polymer diffusion and mechanical properties of films prepared from crosslinked latex particles / Patrick Pinenq in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Polyorthoesters for low-VOC coatings / Hisashi Isaka in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 937 (02/2003)

Permalink

Preparation of modified polyesters containing triphosphorous and their applications to PU flame-retardant coatings / Hong-Soo Park in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Preparation of reversible thermochromic building coatings and their properties / Yiping Ma in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 911 (12/2000)

Permalink

Properties of powder coatings in load carrying construction / Daniel Stahlberg in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Prospects for assessing the adhesive performance of coatings by non-destructive methods / J. A. Graystone in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 88, B3 (09/2005)  

Permalink

Reduction of soil resistance through the use of a composite coating / Xian Jia in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Relating gloss loss to topographical features of a PVDF coating / Jenny Faucheu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Relating laboratory and outdoor exposure of coatings : II. Effects of relative humidity on photodegradation and the apparent quantum yield of acrylic - melamine coatings / Tinh Nguyen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Rheological approach to the capillary penetration of coating into wood / Mari de Meijer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 914 (03/2001)

Permalink

Scratch resistance behavior of automotive plastic coatings / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 925 (02/2002)

Permalink

Scratch resistance behavior of model coating systems / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

A selective catalyst for two-component waterborne polyurethane coatings / Z. Alex He in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 930 (07/2002)

Permalink

Solvent blends based on dipropylene glycol dimethyl ether for the production of alkyd and polyester resins by the azeotropic process / Felipe A. Donate in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)

Permalink

Spatially resolved degradation in heterophasic / Shulamith Schlick in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Speciation of the volatile organic compounds (VOCs) in solventborne aerosol coatings by solid phase microextraction-gas chromatography / Albert C. Censullo in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 936 (01/2003)

Permalink

Stabilization of aluminum pigment in waterborne paints / Bodo Müller in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Structure control, coating properties, and durability of fluorinated acrylic - based polymers / Valter Castelvetro in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)

Permalink

Study of film properties of some urethane oils / F. Seniha Güner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 929 (06/2002)

Permalink

Study of polyester-based coil coatings by using thermal analysis methods / M. Korhonen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 937 (02/2003)

Permalink

Surface rearrangement of tailored polyurethane-based coatings / Mariëlle Wouters in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Synergistic effect of driers on soybean oil-based ceramer coatings / David Deffar in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 919 (08/2001)

Permalink

Synthesis of acrylic resins for high-solids coatings by solution and separation polymerization / Constantinos D. Diakoumakos in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

Permalink

Tailoring HASE rheology through polymer design : Effects of hydrophobe size, acid content, and molecular weight / Wenjun Wu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Testing accelerated weathering tests for appropriate weathering chemistry : Ozone filtered xenon arc / J. L. Gerlock in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 936 (01/2003)

Permalink

Thermal and mechanical properties of UV - cured acrylated hyperbranched polyester and its blends with linear polyurethane acrylate / Wei Huanyu in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)

Permalink

Unexpected electronic effects on benzotriazole UV absorber photostability / Joseph C. Suhadolnik in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)

Permalink

Unifying model for associative thickener influences on waterborne coatings : II. Competitive adsorption of nonionic surfactants and HEUR thickeners on titanium dioxide pretreated with inorganic stabilizers and organic oligomeric dispersants / Ming-Ren Tarng in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 935 (12/2002)

Permalink