113 résultat(s) recherche sur le tag 'Propriété'

Attaining durable painted plastic components / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 5 (01/2005) . - p. 351-360 Titre : Attaining durable painted plastic components Type de document : texte imprimé Auteurs : Rose Ann Ryntz, Auteur Année de publication : 2005 Article en page(s) : p. 351-360 Note générale : Bibliogr. Langues : Américain (ame) Tags : Propriété  mécanique  interface  Oléfine  polymère  Promoteur  adhérence  Etude  expérimentale  Durabilité  Résistance  rupture  Adhésivité  Relation  mise  en  oeuvre  propriété  Polymère  chlore  dérivé  halogéné  Couche  primaire  Traitement  surface  Prétraitement  Peinturage  Procédé  revêtement  Matériau  revêtu  Propène  Mélange  Elastomère  Caoutchouc  thermoplastique Index. décimale : 667.9 Revêtements et enduits Résumé : Adhesion to thermoplastic olefin (TPO) substrates, blends of polypropylene (PP) and an elastomer, is often difficult to attain due to the low surface energy, nonpolar nature of the surface. One often specifies, therefore, that the surface of the substrate be pretreated. Pretreatment methods can vary, from oxidation of the surface, e.g., plasma or flame, to diffusion and mechanical interlocking of an applied polymer with the surface. Mechanical interlocking with the nonpolar TPO surface can be achieved through the use of an adhesion promoter, namely a chlorinated poly(olefin) (CPO). The type of CPO utilized, in addition to the types of solvents and heat treatments utilized, can substantially influence the degree of adhesion/cohesion obtained within the CPO/TPO system. This article reviews the factors influencing the adhesion/cohesion of painted TPO substrates. Heat histories, TPO molding variations, CPO types, including solvent and resin variations, and topcoat (basecoat/clearcoat) chemistries are all found to influence the adhesion/cohesion of the painted TPO assembly (herein termed composite). Once adhesion of a topcoat system to the TPO substrate is achieved, however, the durability of that system to external forces is in question. External forces acting upon the painted composite, e.g., compressive stresses, tensile stresses, and single and/or multiple impact forces, can lead to devastating consequences. Chip or impact resistance and scratch or compressive/tensile (gouge) damage resistance can be affected by the choice of topcoat chemistries utilized. Topcoat frictional behavior, tensile strengths, and surface hardness were all determined to be influential factors in providing robust damage resistance to the painted composite. DOI : 10.1007/s11998-005-0003-0 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-005-0003-0.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3725 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
000589	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Chitosan-hybridized acrylic resins prepared in emulsion polymerizations and their application as interior finishing coatings / Tamaki Wada in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 7 (07/2005) . - p. 577-582 Titre : Chitosan-hybridized acrylic resins prepared in emulsion polymerizations and their application as interior finishing coatings Type de document : texte imprimé Auteurs : Tamaki Wada, Auteur ; Yasuhiro Matoba, Auteur ; Tadashi Uragami, Auteur Année de publication : 2005 Article en page(s) : p. 577-582 Note générale : Bibliogr. Langues : Américain (ame) Tags : Oside  polymère  Etude  expérimentale  Formaldéhyde  Composé  organique  volatil  Capacité  adsorption  Propriété  mécanique  Latex  Relation  mise  en  oeuvre  propriété  Résistance  traction  Copolymérisation  radicalaire  esthétique  émulsion  Préparation  Matériau  revêtement  Vernis  eau  Acrylique  dérivé  copolymère  Mélange  Chitosane Index. décimale : 667.9 Revêtements et enduits Résumé : Chitosan was used to introduce formaldehyde adsorption abilities into an emulsion binder for interior finishing coatings. Chitosan-hybridized acrylic emulsions were prepared by two methods. To produce stable chitosan-hybridized acrylic emulsions, the pre-emulsion dropping method is superior to the monomer dropping method. The adsorption performances for formaldehyde in chitosan-hybridized acrylic resin films increased with increasing chitosan contents; the films also had adsorption abilities for hydrogen sulfide and ammonia. Tensile strengths and elongation at breaking points decreased with increasing chitosan contents. Interior finishing coatings made from chitosan-hybridized acrylic resin emulsions have the qualities necessary for an interior finishing coating and showed excellent adsorption abilities for formaldehyde. DOI : 10.1007/s11998-005-0017-7 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-005-0017-7.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3805 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
002327	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Coloration of polypropylene with interference pigment and the effect of wetting agents on its optical properties / Ramanand N. Jagtap in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 8 (10/2005) . - p. 599-606 Titre : Coloration of polypropylene with interference pigment and the effect of wetting agents on its optical properties Type de document : texte imprimé Auteurs : Ramanand N. Jagtap, Auteur ; K. G Patel, Auteur ; C. K. Nere, Auteur Année de publication : 2005 Article en page(s) : p. 599-606 Note générale : Bibliogr. Langues : Américain (ame) Tags : Propriété  optique  Ether  cyclique  polymère  Oléfine  Etude  expérimentale  Modélisation  Réflexion  Spectrophotométrie  Mesure  Agent  surface  non  ionique  Ethylène  oxyde  Glycol  Dispersant  Pigment  minéral  Couleur  Relation  formulation  propriété  Propène  Coloration Index. décimale : 667.9 Revêtements et enduits Résumé : Coloration of polypropylene with interference pigment with and without dispersing agents, namely propylene glycol and poly (ethylene glycol) were studied. Effect of pigment concentrations and dispersing agents on various color properties of the molded specimens, such as reflectance versus wavelength characteristics, angular dependency, K/S data, and flop index were evaluated using the CIE system with goniospectrophotometer. Surface image analysis was also conducted. Based on the above parameters, design equations were developed. The study revealed that the effective concentration of the interference pigment was 0.5% and better color characteristics were found when poly (ethylene glycol) was used as a dispersing agent. DOI : 10.1007/BF02774589 En ligne : https://link.springer.com/content/pdf/10.1007%2FBF02774589.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3785 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
003121	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Effect of plasticizer on the thermal, mechanical, and anticorrosion properties of an epoxy primer / M. T. Rodriguez in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 7 (07/2005) . - p. 557-564 Titre : Effect of plasticizer on the thermal, mechanical, and anticorrosion properties of an epoxy primer Type de document : texte imprimé Auteurs : M. T. Rodriguez, Auteur ; Jose Javier Gracenea, Auteur ; Julio José Suay, Auteur ; R. Cabello, Auteur ; S. J. Garcia, Auteur Année de publication : 2005 Article en page(s) : p. 557-564 Note générale : Bibliogr. Langues : Américain (ame) Tags : Phtalique  acide  ester  benzyle  butyle  Additif  Etude  expérimentale  Corrosion  sel  Résistance  corrosion  Propriété  dynamomécanique  Optimisation  Diester  Relation  formulation  propriété  Epoxyde  résine  Peinture  primaire  anticorrosion  mécanique  thermique  Plastifiant Index. décimale : 667.9 Revêtements et enduits Résumé : The influence of the glass transition temperature and the mechanical and anticorrosion properties of factors such as the amount of plasticizer added to an epoxy primer were investigated by DSC (differential scanning calorimeter), DMA (dynamic mechanical analysis), stress-strain tests, salt fog spray tests, accelerated tests, and electrochemical tests. The addition of plasticizer results in a decrease in the glass transition temperature and a change in the mechanical properties. Different tests were carried out to the optimum percentage of plasticizer content (1.5-3% weight ratio to epoxy resin) required to obtain the maximum anticorrosion performance of the epoxy primer. These changes are explained by the structural-kinetic effect exerted by the plasticizer on the chemical crosslinking in the course of the epoxy network synthesis and the increase in the excess free volume. DOI : 10.1007/s11998-005-0015-9 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-005-0015-9.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3803 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
002327	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Effects of model coal tar components on adhesion strength of polyurethane coating on steel plate / Naoki Yokoyama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 2, N° 6 (04/2005) . - p. 445-451 Titre : Effects of model coal tar components on adhesion strength of polyurethane coating on steel plate Type de document : texte imprimé Auteurs : Naoki Yokoyama, Auteur ; Kenichi Fujino, Auteur Année de publication : 2005 Article en page(s) : p. 445-451 Note générale : Bibliogr. Langues : Américain (ame) Tags : Propriété  surface  rhéologique  mécanique  Etude  expérimentale  Corrosion  sel  Résistance  corrosion  dynamomécanique  traction  Adhésivité  Composé  aromatique  polycyclique  Goudron  houille  Additif  anticorrosion  Relation  formulation  propriété  Acier  Couche  protectrice  Uréthanne  polymère  Matériau  revêtement Index. décimale : 667.9 Revêtements et enduits Résumé : In order to study the effects of coal tar components on the adhesion strength of a heavy duty anticorrosive coating formed with tar-urethane resin on a steel plate, polyurethane coatings that were compounded with 15 kinds of polycyclic aromatic compounds as model coal tar components were prepared. In the model coal tar components, naphthalene, quinoline, 2-naphthol, and phenanthrene showed good compatibility with polyurethane. To test their heavy duty anticorrosive properties, tensile adhesion strength of the cured coatings prepared with the compatible model coal tar components was measured, and the change in tensile adhesion strength as a function of time during salt-water spray treatment was measured. We found that the systems compounded with naphthalene, 2-naphthol, and phenanthrene showed good properties in an ordinary state for adhesion strength. However, only the system with 2-naphthol was found to have good properties in the change of tensile adhesion strength as a function of time during salt-water spray treatment. The curing time of the system with 2-naphthol was slower than that of the others, i.e., we found an inverse proportion between curing speed and adhesion durability. We also measured the dynamic viscoelasticity of cured coatings. We found that a tan delta curve of the system with 2-naphthol shifted towards a low temperature side and the tan delta at the temperature at which adhesion strength was measured was larger than that of the others. We hypothesized that the reason for the tan delta shift was a result of the decrease in crosslinking density because 2-naphthol partially capped the isocyanate group. Considering these results, we hypothesized that one of the reasons why the adhesion properties of the system with 2-naphthol had improved was due to the increase of tan delta. DOI : 10.1007/BF02733887 En ligne : https://link.springer.com/content/pdf/10.1007%2FBF02733887.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3839 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
001483	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Long-term weathering behavior of UV-curable clearcoats : Depth profiling of photooxidation, UVA, and HALS distributions / Christopher M. Seubert in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures - an AFM study / Xiaohong Gu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Monte Carlo approach to estimating the photodegradation of polymer coatings / Brian R. Hinderliter in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Novel polyurethane coating technology through glycidyl carbamate chemistry / Peter A. Edwards in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Novel, water-based fluorinated polymers with excellent antigraffiti properties / Jurgen Scheerder in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Preparation of modified polyesters containing triphosphorous and their applications to PU flame-retardant coatings / Hong-Soo Park in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Properties of powder coatings in load carrying construction / Daniel Stahlberg in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Relating gloss loss to topographical features of a PVDF coating / Jenny Faucheu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Structure/property relationships in flexible alkoxysilane automotive coatings / Phillip V. Yaneff in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)

Permalink

Surface rearrangement of tailored polyurethane-based coatings / Mariëlle Wouters in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Tailoring HASE rheology through polymer design : Effects of hydrophobe size, acid content, and molecular weight / Wenjun Wu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Thermal and mechanical properties of UV - cured acrylated hyperbranched polyester and its blends with linear polyurethane acrylate / Wei Huanyu in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)

Permalink

UV-radiation curing of waterborne acrylate coatings / C. Decker in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Waterborne latex coatings of color : I. Component influences on viscosity decreases / David M. Mahli in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Waterborne latex coatings of color : II. Surfactant influences on color development and viscosity / David M. Mahli in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Accelerated weathering of wood surfaces coated with multifunctional alkoxysilanes by sol-gel deposition / Mandla A. Tshabalala in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 943 (08/2003)  

Permalink

Acid etch resistance of automotive clearcoats. I : Laboratory test method development / Joseph W. Holubka in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 901 (02/2000)

Permalink

Advances in emulsion polymerization for coatings applications / Mohamed S. El-Aasser in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

An integrated approach towards the study of scratch damage of polymers / G. T. Lim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Analyse de la texture des produits pulvérulents / Christophe Lanos in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

Associative polymer/latex dispersion phase diagrams. II : HASE thickeners / Edward Kostansek in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Bake oven induced variation of surface chemistry on electrocoat paint / Larry P. Haack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Cationic, thermally cured coatings using epoxidized soybean oil / Ramya Raghavachar in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)

Permalink

Cement paint : Myths and realities / S. C. Rathi in PAINTINDIA, Vol. L, N° 5 (05/2000)

Permalink

Cerium acetate-modified aminopropylsilane triol : A precursor of corrosion-preventing coating for aluminum-finned condensers / T. Sugama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Changes in composition and characteristics of latex paints applied on porous inorganic substrates / Dan Y. Perera in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 919 (08/2001)

Permalink

Color and appearance : I / Zeno W. Wicks in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Color and appearance : II / Zeno W. Wicks in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 918 (07/2001)

Permalink

Comparison of methods to assess pigment dispersion / Sang T. Van in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 923 (12/2001)

Permalink

Cost-effective solutions / Paul Dietz in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4543 (12/2009)  

Permalink

Cycloaliphatic polyester based high solids polyurethane coatings / Hai Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)

Permalink

Définitions et spécifications des mortiers pour maçonnerie / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)

Permalink

Detrended fluctuation analysis of UV degradation in a polyurethane coating / Mark A. Johnson in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 941 (06/2003)

Permalink

DuPont Dow fait progresser les fluoroélastomères in PLASTIQUES & ELASTOMERES MAGAZINE, N° 54-8 (11/2002)

Permalink

Effect of crosslinker reaction rate on film properties for thermoset coatings / Ward T. Brown in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Effect of extenders with narrow and broad particle size distributions on the properties of coatings / Rüdiger Werner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Effect of particle size distribution on the performance of two-component water-reducible acrylic polyurethane coatings using tertiary polyisocyanate crosslinkers / Denise E. Fiori in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)

Permalink

Etude de la puissance d'agitation en cuve aérée ou non aérée d'un fluide viscoélastique / A. Tolofoudyé in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

Evaluating barrier properties of organic coatings by water permeation and electrochemical methods / P. C. Inone in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)

Permalink

Evaluation of steel/primer based on chestnut tannin/paint film systems by EIS / S. Hornus Sack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 926 (03/2002)

Permalink

A fluorescence study on dissolution of polymeric glasses prepared in various molecular weights / Önder Pekcan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 944 (09/2003)

Permalink

Formation and characteristics of Al-Zn hydrotalcite coatings on galvanized steel / R. G. Buchheit in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Fracture toughness of inorganic-organic hybrid coatings / R. L. Ballard in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)

Permalink

Hydrophobic coatings from emulsion polymers / D. R. Bassett in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Influence of coating system composition on moisture dynamic performance of coated wood / J. Ekstedt in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 938 (03/2003)

Permalink

Influence of drier combination on through-drying in waterborne alkyd emulsion coatings observed with magnetic resonance profiling / J. Mallégol in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)

Permalink

Influence of extender type of performance of modified lamellar zinc primers / Carlos A. Giudice in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Innovative, gemini-type molecular defoamer technology for improved coating aesthetics / Ernie C. Galgoci in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Interaction of rheology, geometry, and process in coating flow / Richard R. Eley in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Intumescent coatings in the service of fire protection / Upadhya, S. C. in PAINTINDIA, Vol. L, N° 11 (11/2000)

Permalink

Liquid water permeability of exterior wood coatings - Testing according to a proposed European standard method / J. Ekstedt in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 914 (03/2001)

Permalink

Low VOC carbamate functional coatings compositions for automotive topcoats / Marvin L. Green in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 918 (07/2001)

Permalink

Measurement approaches to develop a fundamental understanding of scratch and mar resistance / Mark R. van Landingham in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Measurement of mar resistance and study of marring mechanism of polymeric coatings with scanning probe microscope / Weidian C. Shen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)

Permalink

Mechanical property changes and degradation during accelerated weathering of polyester-urethane coatings / allen Skaja in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Mesure du seuil d'écoulement de produits émulsionnés fluides / S. Raynal in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

Metrology for characterizing scratch resistance of polymer coatings / Li-Piin Sung in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Morphology of hybrid coatings based on polyester, melamine resin, and silica and the relation with hardness and scratch resistance / S. Frings in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 901 (02/2000)

Permalink

Nano-mechanical properties and topography of thermosetting acrylic powder coatings / D. C. Andrei in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Nanostructured polyurethane ceramer coatings for aircraft / Mark D. Soucek in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)

Permalink

Natural weathering performance of exterior wood coatings on pinus sylvestris and pinus radiata in Germany and New Zealand / Bernard S. W. Dawson in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

New polymeric polyol for thermoset coatings / J. Frederic Walker in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)

Permalink

New primary standard for specular gloss measurements / Maria E. Nadal in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 911 (12/2000)  

Permalink

A new rheometer for the extensional properties of viscoelastic liquids / D. Della Valle in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

NIST reference goniophotometer for specular gloss measurements / Maria E. Nadal in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Novel coatings based on mixtures of blown soybean oil and acrylate prepolymers / Pehong Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Novel coatings from soybean oil phosphate ester polyols / Bin Zhong in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 915 (04/2001)

Permalink

Novel synthesis of carboxy - functional soybean acrylic - alkyd resins for water - reducible coatings / Changchun Wang in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Oil modified and waterborne polyurethane resin / G. Gündüz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 931 (08/2002)

Permalink

On the presence of loops in linear self-assembling systems. Statistical methods and Brownian dynamics / Martin Kröger in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

Optical reflectance of metallic coatings : effect of aluminium flake orientation / Li-Piin Sung in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Organic oligomers in aqueous environments / J. David Nordstrom in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 2 (04/2004)  

Permalink

Overblasting effects on surface properties of low-carbon steel / A. W. Momber in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Plastiques. Ethylène/acétate de vinyle (E/VAC) pour moulage et extrusion. Partie 1 : Désignation et spécification- Norme NF EN ISO 4613-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1995)

Permalink

Plastiques. Matériaux à base de poly(chlorure de vinyle) non plastifié (PVC-P) pour moulage et extrusion - Partie 2 : Préparation des éprouvettes et détermination des propriétés - Norme NF EN ISO 2898-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)

Permalink

Plastiques. Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion. Partie 2 : Préparation des éprouvettes et détermination des propriétés - Norme NF EN ISO 11542-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)

Permalink

Plastiques. Polystyrène (PS) pour moulage et extrusion. Partie 2 : Préparation des éprouvettes et détermination des propriétés - Norme NF EN ISO 1622-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)

Permalink

Plastiques. Résines de polyesters non saturés (UP-R) - Norme NF EN ISO 3672-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2002)

Permalink

Plastiques. Styrène/acrylonitrile (SAN) pour moulage et extrusion. Partie 2 : Préparation des éprouvettes et détermination des propriétés - Norme NF EN ISO 4894-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)

Permalink

Polymer diffusion and mechanical properties of films prepared from crosslinked latex particles / Patrick Pinenq in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Polyorthoesters for low-VOC coatings / Hisashi Isaka in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 937 (02/2003)

Permalink

Preparation of reversible thermochromic building coatings and their properties / Yiping Ma in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 911 (12/2000)

Permalink

Prospects for assessing the adhesive performance of coatings by non-destructive methods / J. A. Graystone in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 88, B3 (09/2005)  

Permalink

Reduction of soil resistance through the use of a composite coating / Xian Jia in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Rheological approach to the capillary penetration of coating into wood / Mari de Meijer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 914 (03/2001)

Permalink

Rhéologie des mousses aqueuses en écoulement en conduite / Emmanuel Blondin in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 4 (10/1997)

Permalink

Scratch durability of automotive clear coatings : A quantitative, reliable and robust methodology / Vincent Jardret in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)

Permalink

Scratch resistance behavior of automotive plastic coatings / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 925 (02/2002)

Permalink

Scratch resistance behavior of model coating systems / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Spatially resolved degradation in heterophasic / Shulamith Schlick in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Specular gloss scales comparison between the national institute of standards and technology and the national research council of Canada / Maria E. Nadal in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 943 (08/2003)

Permalink

Study of film properties of some urethane oils / F. Seniha Güner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 929 (06/2002)

Permalink

Study of infrared thermal images of chameleon - type building coatings / Yiping Ma in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 940 (05/2003)

Permalink

Study of odor qualification of solvents used in coating compositions / Patrick D. Ziemer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)

Permalink

Study of polyester-based coil coatings by using thermal analysis methods / M. Korhonen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 937 (02/2003)

Permalink