208 résultat(s) recherche sur le tag 'revêtement'

Formation of a compact oxide layer on AZ91D magnesium alloy by microarc oxidation via addition of cerium chloride into the MAO electrolyte / M. Laleh in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 6 (11/2011)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 8, N° 6 (11/2011) . - p. 765-771 Titre : Formation of a compact oxide layer on AZ91D magnesium alloy by microarc oxidation via addition of cerium chloride into the MAO electrolyte Type de document : texte imprimé Auteurs : M. Laleh, Auteur ; Farzad Kargar, Auteur ; Alireza Sabour Rouhaghdam, Auteur Année de publication : 2011 Article en page(s) : p. 765-771 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Revêtement métallique Tags : 'Alliage  magnésium  AZ91D'  'Oxydation  microarc'  Revêtement  CeCl3  Corrosion Index. décimale : 667.9 Revêtements et enduits Résumé : Magnesium and its alloys have been used in many industries, but they are reactive and require protection against aggressive environments. In this study, a compact and relatively pore-free oxide coating was formed on AZ91D magnesium alloy to improve its corrosion resistance by means of the microarc oxidation (MAO) process via the addition of CeCl3 as an additive into the MAO electrolyte. Morphologies and compositions of the coatings were studied with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. It was found that with the addition of CeCl3 into the MAO electrolyte, the obtained coating showed more uniform morphology compared with the coating produced in the CeCl3 free electrolyte. EDS analysis confirmed the presence of cerium in the coating formed in the electrolyte with CeCl3. Polarization tests results showed that the corrosion current density of the coating formed in the CeCl3 containing electrolyte was less than that of the coating formed in the electrolyte without CeCl3. Furthermore, electrochemical impedance spectroscopy (EIS) tests indicated that the coating formed in the electrolyte with the addition of CeCl3 improved the corrosion resistance of the substrate significantly. Note de contenu : - Microarc oxidation process - Morphologies and compositions of the MAO coatings - Corrosion studies - Porosity measurements of the coatings DOI : 10.1007/s11998-011-9357-7 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-011-9357-7.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12603 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
13484	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Optimisation des composants diélectriques pour les applications laser à forte puissance / Christian Merry in MATERIAUX & TECHNIQUES, Vol. 98, N° 2 (2010)  

[article]  inMATERIAUX & TECHNIQUES > Vol. 98, N° 2 (2010) . - p. 110-112 Titre : Optimisation des composants diélectriques pour les applications laser à forte puissance : De nouveaux revêtements peuvent être crées en combinant des revêtements IAD avec une surveillance optique à large bande de l'épaisseur des couches Type de document : texte imprimé Auteurs : Christian Merry, Auteur Année de publication : 2010 Article en page(s) : p. 110-112 Note générale : Bibliogr. Langues : Français (fre) Catégories : Diélectriques Epaisseur -- Mesure Lasers -- Applications industrielles Mesures optiques Revêtement de surface Tags : Revêtement  'Surveillance  optique'  'Pulvérisation  par  faisceau  d'ions'  E-beam  'Dépôt  physique  en  phase  vapeur'  'Ion-assisted  deposition'  (IAD)  'Optique  à  large  bande'  'Polarisateur  couche  mince'  (TFP)  (TFPB) Index. décimale : 667.9 Revêtements et enduits Résumé : Les avancées dans le domaine de l'optique font augmenter les niveaux d'exigences en matière de composants optiques, comme les caractéristiques techniques, la précision, la fiabilité et la répétabilité. Note de contenu : - Revêtement IBS - Revêtements "E-beam" - Revêtements IAD destinés aux couches compactes et insensibles à la température - Surveillance en ligne et à large bande de l'épaisseur des couches pour les revêtements complexes - Nouveaux produits et améliorations En ligne : http://www.mattech-journal.org/fr/articles/mattech/pdf/2010/02/mt98-2-p110.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=9796 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
012390	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Nanocrystalline γ-Al2O3 thin film deposited by magnetron sputtering (MS) at low temperature / Adele Carradò in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 4 (07/2010)  

[article]  inJOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 7, N° 4 (07/2010) . - p. 515-519 Titre : Nanocrystalline γ-Al2O3 thin film deposited by magnetron sputtering (MS) at low temperature Type de document : texte imprimé Auteurs : Adele Carradò, Auteur ; Mohamed A. Taha, Auteur ; A. El-Mahallawy, Auteur Année de publication : 2010 Article en page(s) : p. 515-519 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Alumine Couches minces Dépôt en phase vapeur Dépôt par laser pulsé Magnétron Matériaux nanocristallins Pulvérisation cathodique Revêtement de surface Tags : Revêtement  'Couches  minces'  'Pulvérisation  par  magnétron'  'Dépôt  chimique  en  phase  vapeur'  physique  'Alumine  nanocristallin'  'Basse  température'  laser  pulsé' Index. décimale : 667.9 Revêtements et enduits DOI : 10.1007/s11998-009-9198-9 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-009-9198-9.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=9775 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
012362	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Mesurer facilement le revêtement des contacts électriques in GALVANO ORGANO, N° 790 (01-02/2010)

[article]  inGALVANO ORGANO > N° 790 (01-02/2010) . - p. 71 Titre : Mesurer facilement le revêtement des contacts électriques Type de document : texte imprimé Année de publication : 2010 Article en page(s) : p. 71 Langues : Français (fre) Tags : Epaisseur  revêtement  Mesure  Méthode  IOBC  (Independent  of  Base  Composition) Index. décimale : 667.9 Revêtements et enduits Résumé : Dans la pratique, le principe de la fluorescence de rayons X Fischerscope permet de mesurer facilement le revêtement des contacts électriques. La méthode utilisée permet de déterminer précisément l'épaisseur des couches indépendamment de la composition du matériau de base. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8419 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
011982	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Prospects for assessing the adhesive performance of coatings by non-destructive methods / J. A. Graystone in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 88, B3 (09/2005)  

[article]  inSURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS > Vol. 88, B3 (09/2005) . - p. 163-170 Titre : Prospects for assessing the adhesive performance of coatings by non-destructive methods Type de document : texte imprimé Auteurs : J. A. Graystone, Auteur ; R. Kennedy, Auteur Année de publication : 2005 Article en page(s) : p. 163-170 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adhésion Contrôle non destructif Emission acoustique Interférométrie lasers Revêtements organiques Thermographie Tags : Formation  motif  Subsurface  Interférométrie  Thermographie  Emission  acoustique  Peinture  Propriété  surface  Adhérence  Essai  non  destructif  Revêtement  Performance  Etude  expérimentale Index. décimale : 667.9 Revêtements et enduits Résumé : Adequate adhesion is the sine qua non for good practical performance in surface coatings systems such as paint. By far the majority of tests used in the coatings industry are destructive and difficult to correlate with performance. Moreover, destructive tests are incompatible with best practice in inspection and quality control. A range of non-destructive testing techniques was appraised for their ability to investigate different types of coating failure involving adhesion. Three techniques were selected for preliminary investigation, namely acoustic emission, pulse thermography and laser interferometry. All three techniques were capable of investigating different aspects of adhesive failure. Pulse thermography could detect subsurface damage not apparent to visual inspection, and acoustic emission could, under some circumstances, give information of damage initiation prior to catastrophic failure. Electronic speckle pattern shearing interferometry (ESPSI) was also able to detect sub-surface damage, and showed promise of detecting differences in strain transfer prior to any detachment failure. Note de contenu : - DISCUSSION : Approaches to non-destructive testing of coatings - Summary of specific techniques - EXPERIMENTAL WORK AND PRACTICAL EVALUATION : Test panels - Evaluation of electronic speckle pattern shearing interferometry - Evaluation of pulse thermography - Acoustic emission - Table 1 : Summary of some methods for assessing adhesive performance non-destructively - Table 2 : Potential techniques for studying different types of coating adhesion problem in four major application areas - Table 3 : Pull-off and cross hatch results for various primed panels at two films thicknesses DOI : 10.1007/BF02699568 En ligne : https://link.springer.com/content/pdf/10.1007/BF02699568.pdf Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5411 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
003027	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Dureté des revêtements : quel modèle choisir ? / Alain Iost in MATERIAUX & TECHNIQUES, Vol. 93, N° 7/8 (2005)  

Permalink

Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models / Si Hyung Lee in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 1 (01/2014)  

Permalink

Preparation of a superamphiphobic surface on a common cast iron substrate / Zhiqing Yang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 6 (11/2011)  

Permalink

Quantification of simultaneous solvent evaporation and chemical curing in thermoset coatings / Søren Kiil in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 5 (09/2010)  

Permalink

Soy-based UV-curable thiol–ene coatings / Zhigang Chen in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 5 (09/2010)  

Permalink

The effect of substrate temperature on the microstructural properties of nanocrystalline tin oxide coatings produced by APCVD / Ramazan Karslioglu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 4 (07/2010)  

Permalink

Travaux de bâtiment - Revêtements de peinture en feuil mince, semi-épais, ou épais. Partie 1-1 : Cahier des clauses techniques types - Norme NF DTU 59-.1 P1-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2013)

Permalink

Travaux de bâtiment - Revêtements de peinture en feuil mince, semi-épais, ou épais. Partie 1-2 : Critères généraux de choix des matériaux - Norme NF DTU 59-1 P1-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2013)

Permalink

Travaux de bâtiment - Revêtements de peinture en feuil mince, semi-épais, ou épais. Partie 2 : Cahier des clauses administratives spéciales types - Norme NF DTU 59-1 P2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2013)

Permalink

Matériel roulant ferroviaire. Peintures aux résines époxydiques et de polyuréthannes - Norme NF F 19-290 / Bureau de Normalisation des Chemins de Fer / Paris : BNCF (1991)

Permalink

Chemical depth profiling of automotive coating systems using slab microtome sectioning with IR/UV-VIS spectroscopy and optical microscopy / Karlis Adamsons in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)

Permalink

Durability of powder-coated hot-dip galvanized steel / H. G. J. M. Verstappen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 930 (07/2002)

Permalink

Improper selection of a maintenance strategy takes corrosion protection from bad to worse / Valerie Sherbondy in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 27, N° 1 (01/2010)

Permalink

Long-term weathering behavior of UV-curable clearcoats : Depth profiling of photooxidation, UVA, and HALS distributions / Christopher M. Seubert in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Novel, water-based fluorinated polymers with excellent antigraffiti properties / Jurgen Scheerder in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Reduction of soil resistance through the use of a composite coating / Xian Jia in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Reformulating for curtain coating / John A. Taylor in ADHESIVES AGE, Vol. 46, N° 4 (06-07/2003)  

Permalink

About coatings and cathodic protection / I. C. P. Margarit-Mattos in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 914 (03/2001)

Permalink

Accelerated weathering of wood surfaces coated with multifunctional alkoxysilanes by sol-gel deposition / Mandla A. Tshabalala in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 943 (08/2003)  

Permalink

Acid etch of automotive clearcoats. II. Comparison of degradation chemistry in laboratory and field testing / P. J. Schmitz in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 902 (03/2000)

Permalink

Acid etch resistance of automotive clearcoats. I : Laboratory test method development / Joseph W. Holubka in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 901 (02/2000)

Permalink

Advanced testing procedures for high performance coatings / Flavio Deflorian in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

Permalink

Advances in emulsion polymerization for coatings applications / Mohamed S. El-Aasser in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Advances in weathering testing / Allen Zielnik in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4540 (09/2009)  

Permalink

Advantage of evaluating coatings in a real-world manufacturing environment / Douglas Corrigan in COATINGS TECH, Vol. 15, N° 10 (10/2018)  

Permalink

Ahead of the field (Part 2) / Bedri Erdem in EUROPEAN COATINGS JOURNAL (ECJ), N° 10/2009 (10/2009)  

Permalink

Analysing depth profile of double bond conversion / Rong Bao in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4535 (04/2009)  

Permalink

Analysis of exempt paint solvents by gas chromatography using solid-phase microextraction / Golden Gate Society for Coatings Technology Technical Committee in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 900 (01/2000)

Permalink

Analytical investigations on acrylic polyurethane hybrid - dispersions / H. Kagerer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 927 (04/2002)

Permalink

Analytical method for the release of isothiazolones from microtubules in artificial seawater / Ronald R. Price in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 943 (08/2003)

Permalink

Angular plane curtain coating by drawdown of extruded polymer / Fan Ding in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 900 (01/2000)

Permalink

Anticipating paint cracking / Mark E. Nichols in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)

Permalink

Approach towards lead abatement and lead free paints / Shrikant M. Naik in PAINTINDIA, Vol. LII, N° 11 (11/2002)

Permalink

Associative polymer/latex dispersion phase diagrams. II : HASE thickeners / Edward Kostansek in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Atmospheric corrosion behavior of paint systems applied on weathered hot-dip galvanized steel / D. de La Fuente in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 935 (12/2002)

Permalink

Attaining durable painted plastic components / Rose Ann Ryntz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Bake oven induced variation of surface chemistry on electrocoat paint / Larry P. Haack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Calcium tripolyphosphate / V. F. Vetere in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Cationic, thermally cured coatings using epoxidized soybean oil / Ramya Raghavachar in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)

Permalink

Cationic uv-cured coatings containing epoxidized soybean oil initiated by new onium salts containing tetrakis (pentafluorophenyl) gallate anion / Haiyan Gu in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 927 (04/2002)

Permalink

Cerium acetate-modified aminopropylsilane triol : A precursor of corrosion-preventing coating for aluminum-finned condensers / T. Sugama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Challenge 2005 and beyond : recognition, transformation, and profitable use of innovative thinking / George R. Pilcher in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 5 (01/2005)  

Permalink

Changes in composition and characteristics of latex paints applied on porous inorganic substrates / Dan Y. Perera in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 919 (08/2001)

Permalink

Chitosan-hybridized acrylic resins prepared in emulsion polymerizations and their application as interior finishing coatings / Tamaki Wada in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 7 (07/2005)  

Permalink

Coating and lining for concrete in secondary chemical containment / Shrikant M. Naik in PAINTINDIA, Vol. XLVII, N° 12 (12/1997)

Permalink

Coating evaluation and validation of accelerated test conditions using an in-situ corrosion sensor / G. D. Davis in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 935 (12/2002)

Permalink

Color and appearance : I / Zeno W. Wicks in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Color and appearance : II / Zeno W. Wicks in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 918 (07/2001)

Permalink

Colorant-induced exterior discoloration of latex paints / Lakshmi Sadasivan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Comparison of single and multilayer coatings based on ormosil and conversion layers for aluminum alloy corrosion inhibition / Olga Kachurina in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 926 (03/2002)

Permalink

Computer analysis of a polymer coating exposed to field weather conditions / Doug Burch in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 924 (01/2002)

Permalink

Cost-effective solutions / Paul Dietz in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4543 (12/2009)  

Permalink

Cutting the crosslinker in EUROPEAN COATINGS JOURNAL (ECJ), N° 06/2010 (06/2010)  

Permalink

Cycloaliphatic polyester based high solids polyurethane coatings / Hai Ni in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 928 (05/2002)

Permalink

Development of low temperature curing, 120°C, durable, corrosion protection powder coatings for temperature sensitive substrates / Glen Merfeld in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 8 (10/2005)  

Permalink

Digital system for detecting, classifying, and fast retrieving corrosion generated defects / S. T Kyvelidis in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 915 (04/2001)

Permalink

Durable powder coatings / Ashraf El Wassify in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4540 (09/2009)  

Permalink

Duration of wood preweathering / R. Sam Williams in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Dynamic simulations of a self-polishing antifouling paint exposed to seawater / Søren Kiil in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 929 (06/2002)

Permalink

Effect of carbon black on adhesion to plastics in solventborne 2K polyurethanes / Kalpana S. Katti in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Effect of crosslinker reaction rate on film properties for thermoset coatings / Ward T. Brown in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)

Permalink

Effect of extenders with narrow and broad particle size distributions on the properties of coatings / Rüdiger Werner in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)

Permalink

Effect of formulation variables on coating properties and performance in the deep draw process / A. Polyakova in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 901 (02/2000)

Permalink

Effects of model coal tar components on adhesion strength of polyurethane coating on steel plate / Naoki Yokoyama in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 2, N° 6 (04/2005)  

Permalink

Effects of reaction conditions on the formation of poly(2-vinylpyridine) coatings by electropolymerization / Xiaoping Ling in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

Permalink

Effects of thickness and substrate on the mechanical properties of hard coatings / Zenghu Han in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink

Electrochemical study of lap-joint corrosion of steel with metallic coatings / A. Bautista in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 920 (09/2001)

Permalink

Evaluating barrier properties of organic coatings by water permeation and electrochemical methods / P. C. Inone in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 939 (04/2003)

Permalink

Evaluation of alkane sulfonic acid catalysts and derivatives for curing activity in a melamine/acrylic polyol coating formulation using Fourier transform infrared spectroscopy / Dana Garcia in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)

Permalink

Evaluation of steel/primer based on chestnut tannin/paint film systems by EIS / S. Hornus Sack in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 926 (03/2002)

Permalink

Faster product changeover in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4537 (06/2009)  

Permalink

Formulation and testing of a waterborne primer containing chestnut tannin / O. Pardini in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)

Permalink

Fracture toughness of inorganic-organic hybrid coatings / R. L. Ballard in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 913 (02/2001)

Permalink

Fundamental studies on morphology control for latex systems with application to waterborne coatings : the effect of polymer radical mobility in latex particles during polymerization / Jeffrey M. Stubbs in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 938 (03/2003)

Permalink

Graffiti A challenge to coating industry - A review / Suvarna Dagli in PAINTINDIA, Vol. LII, N° 9 (09/2002)

Permalink

Green minerals solution / Simon Bussell in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4543 (12/2009)  

Permalink

How does waterjet cleaning affect the surface and surface preparation ? / Lydia M. Frenzel in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 27, N° 1 (01/2010)  

Permalink

Hydrophobic coatings from emulsion polymers / D. R. Bassett in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 912 (01/2001)

Permalink

Hydrothermal degradation study of phenolic polymer coatings by advanced analytical methods / T. Sugama in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 917 (06/2001)

Permalink

Imaging ellipsometry study of multi-layer microflakes / H. Rafla-Yuan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)

Permalink

Impact of functional group distribution on the adsorption of a polymeric dispersant / Iwao Soga in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 938 (03/2003)

Permalink

Improving pigment dispersing in powder coatings with block copolymer dispersants / Francis L. Duivencoorde in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)

Permalink

Influence of coating system composition on moisture dynamic performance of coated wood / J. Ekstedt in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 938 (03/2003)

Permalink

Influence of drier combination on through-drying in waterborne alkyd emulsion coatings observed with magnetic resonance profiling / J. Mallégol in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)

Permalink

Innovative, gemini-type molecular defoamer technology for improved coating aesthetics / Ernie C. Galgoci in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)  

Permalink

Interaction of rheology, geometry, and process in coating flow / Richard R. Eley in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Interdiffusion and crosslinking in thermoset latex films / Mitchell A. Winnik in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 925 (02/2002)

Permalink

Interfacial adhesion measurement of a ceramic coating on metal substrate / Pulin Nie in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 3 (05/2010)  

Permalink

Investigation of the adhesion of NbN coatings deposited by pulsed dc reactive magnetron sputtering using scratch tests / Yasar Totik in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 4 (07/2010)  

Permalink

Isocyanate - free moisture cure coatings / Jamil A. Baghdachi in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 932 (09/2002)

Permalink

Lap-joint corrosion testing of precoated steel sheets / Belén Chico in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 944 (09/2003)

Permalink

Liquid water permeability of exterior wood coatings - Testing according to a proposed European standard method / J. Ekstedt in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 914 (03/2001)

Permalink

Low viscosity 100 % radiation curable formulations / Catherine Leroy in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4535 (04/2009)  

Permalink

Low VOC carbamate functional coatings compositions for automotive topcoats / Marvin L. Green in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 918 (07/2001)

Permalink

Mass transport mechanism for the formation of latex-modified epoxy coatings by evaporation from aqueous dispersions / Sidney L. Phillips in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)  

Permalink