Accueil
Résultat de la recherche
15 résultat(s) recherche sur le tag 'formation'
Ajouter le résultat dans votre panier Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche
Mass transport mechanism for the formation of latex-modified epoxy coatings by evaporation from aqueous dispersions / Sidney L. Phillips in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 1, N° 4 (10/2004)
[article]
Titre : Mass transport mechanism for the formation of latex-modified epoxy coatings by evaporation from aqueous dispersions Type de document : texte imprimé Auteurs : Sidney L. Phillips, Auteur ; M. Troy Davis, Auteur ; Daniel J. Phillips, Auteur Année de publication : 2004 Article en page(s) : p. 315-327 Note générale : Bibliogr. Langues : Américain (ame) Tags : Etude expérimentale comparative théorique Transfert chaleur masse Modèle cinétique Modélisation Mécanisme formation Cinétique Formation film Séchage Dispersion aqueuse Matériau revêtement Epoxyde résine Index. décimale : 667.9 Revêtements et enduits Résumé : The transport mechanism for the evaporation of dispersing liquid during the solidification of an epoxy dispersion that had been stabilized to prevent crack formation with a latex dispersion was studied. Aqueous dispersions consisting of an experimentally determined ratio of epoxy resin and nitrile latex were evaporated at 35°C. When the dispersion was evaporated under controlled conditions without forced air flow, a flexible and adherent polymer material formed. The mechanism for coalescence was related to the loss in weight of dispersing liquid during an initial zero order kinetics stage. This was followed by a rate-controlled Fick's law diffusion through the developing coating with subsequent evaporation to the atmosphere. Experimental measurements are compared with theoretical predictions. The rate constant for the zero order time frame is 0.086 ± 0.02 h-1. In the second time frame, Ficks's law evaporation rate constant is 0.046 ± 0.017 cm.h-1 with a diffusion coefficient of 0.00092 ± 0.00051 cm2.hr-1 at 35 ± 1 °C and RH 35 ± 7%. Applications for evaporation kinetics are discussed. DOI : 10.1007/s11998-004-0033-z En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-004-0033-z.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=3862
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 1, N° 4 (10/2004) . - p. 315-327[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000588 - Périodique Bibliothèque principale Documentaires Disponible Effects of reaction conditions on the formation of poly(2-vinylpyridine) coatings by electropolymerization / Xiaoping Ling in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 908 (09/2000)
[article]
Titre : Effects of reaction conditions on the formation of poly(2-vinylpyridine) coatings by electropolymerization Type de document : texte imprimé Auteurs : Xiaoping Ling, Auteur ; Mark D. Pritzker, Auteur ; Charles M. Burns, Auteur ; John J. Byerley Année de publication : 2000 Article en page(s) : p. 71-80 Note générale : Bibliogr. Langues : Américain (ame) Tags : Matériau revêtement Procédé Polymérisation électrolytique Pyridine(2-vinyl)polymère Pyridine(2-vinyl)copolymère Formation film Couche protectrice anticorrosion Acier doux Condition opératoire Etude expérimentale Index. décimale : 667.9 Revêtements et enduits Résumé : The effects of reaction conditions on the formation of poly(2-vinylpyridine) coatings on mild steel by electropolymerization have been investigated. Over the ranges studied, the relative effects of these reaction conditions on the weight of the coating produced is found to decrease as follows : monomer concentration > solution pH > methanol concentration > solution temperature. The optimum conditions for coating formation are to use a solution with a composition of 0.25 M 2-vinylpyridine, 15 vol% methanol, and pH 5.0 at a temperature of 20 °C. If the monomer concentration is too high, the coating formed is soft and tacky; if it is too low, a thin and non-uniform coating is produced. Methanol concentrations between 15 and 25 vol% are required to produce uniform and thick films. Coating weights decrease at electropolymerization temperatures above 40°C, presumably due to an increase in polymer solubility. The polymer films become thicker and more uniform as electrolysis continues up to two hours. Ammonium perchlorate is found to be the most suitable electrolyte for the process, although its actual concentration has little impact on film quality. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5789
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 72, N° 908 (09/2000) . - p. 71-80[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001213 - Périodique Bibliothèque principale Documentaires Disponible Function of surfactants in hair dyeing by oxidation dyes 2. Effect on formation of oxidation dyes by p-aminophenol and 5-amino-o-cresol in dye bath / Hidekazu Yasunaga in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 29, N° 4 (08/2007)
[article]
Titre : Function of surfactants in hair dyeing by oxidation dyes 2. Effect on formation of oxidation dyes by p-aminophenol and 5-amino-o-cresol in dye bath Type de document : texte imprimé Auteurs : Hidekazu Yasunaga, Auteur ; H. Urakawa, Auteur ; K. Kajiwara, Auteur ; T. Shinkawa, Auteur ; T. Komoda, Auteur ; Y. Ishii, Auteur Année de publication : 2007 Article en page(s) : p. 301-309 Note générale : Bibliogr. Langues : Anglais (eng) Tags : Dye formation reaction Hair colouring dyeing Oxidation dye Surfactant Index. décimale : 668.5 Parfums et cosmétiques Résumé : L'effet des agents tensio-actifs sur une réaction d'oxydation-cheveu-teinture-formation dans un bain de teinture a été étudié afin d'apprendre le mécanisme de l'effet des agents tensio-actifs sur la capacité de teinture des cheveux par le colorant d'oxydation. Les comportements de teinture-formation pour le système du p-aminophenol (PAP) et du 5-amino-o-cresol (5AOC) avec des agents tensio-actifs, dont les pièces hydrophiles ont la charge différente, ont été comparés en changeant la concentration des agents tensio-actifs. On a trouvé que les mêmes colorants sont produits indépendamment de la charge des agents tensio-actifs supplémentaires et le taux de colorant produit dans le bain de teinture est augmenté en présence des agents tensio-actifs. L'ordre de la vitesse de production est, avec de l'agent tensio-actif anionique > avec de l'agent tensio-actif non ionique > avec de l'agent tensio-actif cationique > sans agent tensio-actif. La relation entre la capacité de teinture des cheveux et le taux de colorant produit dans le dyebath en présence des agents tensio-actifs n'est pas trouvée. Le facteur principal régissant la capacité de teinture des cheveux est différent du mécanisme du colorant accru dans la solution. On a également relevé que le taux teindre-formation est augmenté en immergeant des cheveux dans la solution de réaction et les cheveux fonctionnent comme accélérateur pour la réaction de teinture-formation. DOI : 10.1111/j.1467-2494.2007.00384.x En ligne : http://onlinelibrary.wiley.com/doi/10.1111/j.1467-2494.2007.00384.x Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=4624
in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE > Vol. 29, N° 4 (08/2007) . - p. 301-309[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 008183 - Périodique Bibliothèque principale Documentaires Disponible Surface pattern formation in UV-curable coatings / André Luciani in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 909 (10/2000)
[article]
Titre : Surface pattern formation in UV-curable coatings Type de document : texte imprimé Auteurs : André Luciani, Auteur ; Christopher J. C. Plummer, Auteur ; Rudolf Gensler, Auteur ; Jan-Anders E. Manson, Auteur Année de publication : 2000 Article en page(s) : p. 161-163 Note générale : Bibliogr. Langues : Américain (ame) Tags : Matériau revêtement Peinture Durcissement Rayonnement UV Formation film Texturation motif Index. décimale : 667.9 Revêtements et enduits Résumé : Some UV curable coatings display matte surfaces after cure if they have undergone a certain period of leveling at a temperature above their glass transition temperature and the melting point of any crystalline co-reagents present in the formation. The matte finish of these coatings is due to the presence of coherent surface wrinkles after cure, which are similar in appearance to those induced by differential thermal contraction, when a metal layer is sputtered onto a rubbery or viscous substrate. However, the wrinkles in the UV-cured coatings appear under isothermal conditions, and it is, therefore, inferred that they are due to the dynamics of internal stresses induced by through-thickness variations in the extent of curing. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5787
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 72, N° 909 (10/2000) . - p. 161-163[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 001214 - Périodique Bibliothèque principale Documentaires Disponible 001215 - Périodique Bibliothèque principale Documentaires Disponible Surface-tension-driven flows of coatings : Bondline readout formation / Richard H. J. Blunk in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 918 (07/2001)
[article]
Titre : Surface-tension-driven flows of coatings : Bondline readout formation Type de document : texte imprimé Auteurs : Richard H. J. Blunk, Auteur ; James O. Wilkes, Auteur Année de publication : 2001 Article en page(s) : p. 63-71 Note générale : Bibliogr. Langues : Américain (ame) Tags : Industrie automobile Matériau revêtement Peinture Vernis Formation film Etalement Défaut Tension superficielle Ecoulement Index. décimale : 667.9 Revêtements et enduits Résumé : Bondline readout (BLRO) is a coating defect frequently observed on adhesively bonded, polymeric automotive body panels. This paper addresses ridging BLRO in clearcoats, not optical and mechanical BLRO, which are characterized by metal-flake orientation (dark/light effects) in basecoats and by distortion in substrates, respectively. Ridging BLRO is due to film thickness differences and results from Marangoni-type, surface-tension-driven flows. In this study, the effects of several parameters on BLRO are investigated experimentally. These parameters include initial film thickness, heating rate, viscosity, solvent-to-resin surface-tension ratio, and solvent volatility. The experiments clearly demonstrate three modes of BLRO flow-formation, flow-out, and reformation-that result from competing surface-tension-gradient forces (temperature- versus concentration-induced). Experimental results are used to validate a proposed BLRO mechanism and, in subsequent work, a BLRO-predicting numerical code. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5740
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 73, N° 918 (07/2001) . - p. 63-71[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001226 - Périodique Bibliothèque principale Documentaires Disponible Changes in composition and characteristics of latex paints applied on porous inorganic substrates / Dan Y. Perera in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 919 (08/2001)
PermalinkLe craquage catalytique, unité clé d'une raffinerie / Michel Guisnet in L'ACTUALITE CHIMIQUE, N° 2 (02/2000)
PermalinkEffect of crosslinker reaction rate on film properties for thermoset coatings / Ward T. Brown in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 904 (05/2000)
PermalinkInterdiffusion and crosslinking in thermoset latex films / Mitchell A. Winnik in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 925 (02/2002)
PermalinkPolymer diffusion and mechanical properties of films prepared from crosslinked latex particles / Patrick Pinenq in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 903 (04/2000)
PermalinkLes enzymes de l'espace extra-cellulaire du stratum corneum / J. P. Forestier in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 14, N° 2 (04/1992)
PermalinkImaging ellipsometry study of multi-layer microflakes / H. Rafla-Yuan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 72, N° 907 (08/2000)
PermalinkInfluence of drier combination on through-drying in waterborne alkyd emulsion coatings observed with magnetic resonance profiling / J. Mallégol in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 74, N° 933 (10/2002)
PermalinkProspects for assessing the adhesive performance of coatings by non-destructive methods / J. A. Graystone in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 88, B3 (09/2005)
PermalinkUV-visible technique for studying powder coatings and their dissolution / Önder Pekcan in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 73, N° 923 (12/2001)
Permalink