Accueil
Catégories
> Essais de résilience
Essais de résilienceVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Cuir. Détermination de l'extension et de la résistance à la traction de la fleur d'un cuir - Méthode de la bille - Norme ISO 3379 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1976)
Titre de série : Cuir Titre : Détermination de l'extension et de la résistance à la traction de la fleur d'un cuir - Méthode de la bille - Norme ISO 3379 Type de document : texte imprimé Auteurs : International Organization for Standardization (Genève, Suisse) , Auteur Editeur : Geneve [Switzerland] : International Organization for Standardization (ISO) Année de publication : 1976 Importance : 3 p. Présentation : ill. Format : 30 cm ISBN/ISSN/EAN : 0335-3931 Langues : Français (fre) Catégories : Cuirs et peaux -- Normes
Cuirs et peaux -- Propriétés mécaniques
Essais de résilience
Essais dynamiques
Fleur du cuir
Traction (mécanique)Index. décimale : 675 Technologie du cuir et de la fourrure Résumé : La présente norme internationale spécifie une méthode de détermination de l'extension et de la résistance à la traction de la fleur d'un cuir. Cette méthode est plus particulièrement destinée à être utilisée pour les cuirs à dessus de chaussures, mais peut être aussi appliquée à toute peausserie. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29295 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19315 ISO 3379 Norme Bibliothèque principale Documentaires Disponible Cuir - Essais de solidité des teintures. Solidité des teintures à la goutte d'eau - Norme NF EN ISO 15700 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
Titre de série : Cuir - Essais de solidité des teintures Titre : Solidité des teintures à la goutte d'eau - Norme NF EN ISO 15700 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 2001 Importance : 4 p. Format : 30 cm ISBN/ISSN/EAN : 0335-3931 Note générale : Annexes Langues : Français (fre) Catégories : Cuirs et peaux -- Normes
Cuirs et peaux -- Teinture
Décoloration
Essais de résilience
Résistance à l'humidité:Résistance à l'eau
Solidité de la couleurIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : Le présent document décrit une méthode d'essai pour évaluer l'effet d'une goutte d'eau sur tous les types de cuir. Cette méthode convient pour déterminer, à l'aide d'une échelle de gris normalisée, la dégradation de la coloration du cuir sous l'effet de l'eau. Indice de classement : G 52-310 Classification ICS : 59.140.30 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29300 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19321 G 52-310 Norme Bibliothèque principale Documentaires Disponible Cure-on-demand, ultra-high-solid nonskid coatings through frontal polymerization in COATINGS TECH, Vol. 20, N° 1 (01-02/2023)
[article]
Titre : Cure-on-demand, ultra-high-solid nonskid coatings through frontal polymerization Type de document : texte imprimé Année de publication : 2023 Article en page(s) : p. 34-44 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Charges (matériaux)
Coefficient de friction
Effet antidérapant
Essais de résilience
Essais dynamiques
Formulation (Génie chimique)
Polymérisation
Résistance au chocs
Revêtements -- Additifs
Revêtements -- Propriétés mécaniques
Revêtements bi-composant
Revêtements organiques
Rhéologie
Silice pyrogénéeLa silice pyrogénée (numéro CAS 112945-52-5, fumed silica en anglais) est une forme de dioxyde de silicium, ou silice, de formule chimique SiO2. Elle se présente comme une poudre constituée de gouttelettes de silice fondue refroidies en formant des chaînes tridimensionnelles qui s'organisent en particules de matière amorphe de très faible masse volumique apparente et de surface spécifique très élevée. Cette structure particulière entraîne un comportement thixotrope accroissant la viscosité des substances dans lesquelles elle est utilisée comme épaississant ou comme charge dans les matières plastiques.
Applications : La silice pyrogénée est un épaississant et un anti-agglomérant largement utilisé dans les poudres. Comme le gel de silice, elle peut être utilisée comme absorbeur d'humidité. On la retrouve dans les cosmétiques du fait de ses propriétés de diffusion de la lumière. Elle est utilisée comme abrasif doux dans le dentifrice, comme charge dans les élastomères en silicone et pour l'ajustement de la viscosité de peintures, revêtements, encres, adhésifs et résines de polyesters insaturés. (Wikipedia)Index. décimale : 667.9 Revêtements et enduits Résumé : Current two-component coatings require exact mixing ratios for application and performance, have varying cure times, and release volatile organic compounds (VOCs). Cure-on demand technology can be used to combat these challenges. Note de contenu : - EXPERIMENTAL : Materials - Addition of fumed silica to reduce cure time - Fillers as additives to reduce internatl stresses and prevent cracking - Wet film thickness study - Resin composition study - Varying the distance of heat source - Preparation of nonskid coatings - Impact testing - Chemical testing - Corrosion testing - Flexibility test - Coefficient of friction (COF)
- RESULTS AND DISCUSSION : Base formulation - Nonskid formulation - Preliminary formluation - Impact testing - Flexibility testing - Qualitative chemical testing - Corrosion - Coefficient of friction - Rheology
- Figure : Structure of (1) bisphenol-A epoxy acrylate, (2) 1,1-bis(tert-buryl-peroxy)-3,3,5-tricyclohexane, (3) tripropylene glycol diacrylate, and (4) pentaerythritol triacrylateEn ligne : https://drive.google.com/file/d/1osPLPei03t4WEQlm-iibl2lgastNfqGe/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=38715
in COATINGS TECH > Vol. 20, N° 1 (01-02/2023) . - p. 34-44[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23812 - Périodique Bibliothèque principale Documentaires Disponible Damping, thermal and mechanical analyses of polycarbonate/cerium oxide composites for structural applications / R. Karuppasamy in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 3 (07/2019)
[article]
Titre : Damping, thermal and mechanical analyses of polycarbonate/cerium oxide composites for structural applications Type de document : texte imprimé Auteurs : R. Karuppasamy, Auteur ; R. Muralikannan, Auteur Année de publication : 2019 Article en page(s) : p. 324-329 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Amortissement (mécanique)
Analyse mécanique dynamique
Analyse thermique
Caractérisation
Composites thermoplastiques -- Propriétés mécaniques
Essais de résilience
Matières plastiques -- Extrusion
Oxyde de cérium
Polycarbonates
Résistance à la traction
Résistance au chocs
ThermogravimétrieIndex. décimale : 668.4 Plastiques, vinyles Résumé : Polycarbonate (PC)/cerium (IV) oxide (CeO2) composites are prepared by a melt-compounding method using a twin-screw extruder. The effect of the CeO2 content on the damping property of the composites was investigated using scanning electron microscopy, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). In addition, the composites' mechanical properties were studied through tensile and impact tests. The DMA results revealed that the addition of CeO2 (0.5 wt%) improved the damping property of the composite. TGA showed that the thermal stability was improved when the CeO2 became 1 wt%. Mechanical tests revealed that both the tensile and impact strengths were substantially improved when 1 wt% CeO2 was added. Finally, it can be concluded that the 0.5 wt% CeO2-filled PC composite can be used as a structural damping material. Note de contenu : - EXPERIMENTAL : Materials - Composite preparation - Characterization
- RESULTS AND DISCUSSION : DMA - Tensile strength analysis
- Impact strength analysis - Thermogravimetric analysis - Morphologies of the fractured surfacesDOI : https://doi.org/10.3139/217.3723 En ligne : https://drive.google.com/file/d/1v_AkaLdOZrn65-ueVXTdiSCqQp0BQ9St/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32894
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXIV, N° 3 (07/2019) . - p. 324-329[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21036 - Périodique Bibliothèque principale Documentaires Disponible Design of pigment dispersants for high-performance applications / Andrew Shooter in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4644 (09/2018)
[article]
Titre : Design of pigment dispersants for high-performance applications Type de document : texte imprimé Auteurs : Andrew Shooter, Auteur ; Tom Annable, Auteur ; Stuart Richards Année de publication : 2018 Article en page(s) : p. 26-30 Langues : Anglais (eng) Catégories : Agents dispersants (chimie)
Anticorrosifs
Anticorrosion
Dioxyde de titane
Dispersions et suspensions
Epoxydes
Essais accélérés (technologie)
Essais de résilience
Oxyde de fer
Pigments inorganiques
Revêtements bi-composant
Revêtements en phase aqueuse -- Additifs:Peinture en phase aqueuse -- AdditifsIndex. décimale : 667.9 Revêtements et enduits Résumé : With increasing regulatory and environmental requirements, there is a drive towards developing water-based VOC free pigmented coating formulations with the same aesthetic properties as solvent-based systems. The pigment dispersant in addition to providing fast wetting and desirable colouristic effects will also impact the overall durability of the coating. Novel anchor groups have enabled us to design improved dispersants, which can be formulated into coatings with superior jetness and colour strength. These dispersants can reduce the particle size in much less time than conventional dispersants using less energy during the milling process while providing the required stability and compatibility in the coating formulation. In addition, through efficiency in design coupled with judicious selection of stabilising chains, the dispersant can be optimised to minimise its impact on water sensitivity and corrosion resistance.
After proving that these principles deliver superior dispersants on organic pigments and carbon black, our recent focus has been to deliver the same benefits on high end inorganic pigments for industrial applications, such as transparent iron oxides. In this paper, we will discuss these design principles and show how this has translated into superior performance in waterborne industrial coatings.Note de contenu : - Dispersion of transparent iron oxides
- Dispersion of titanium dioxide
- FIGURES : 1. Optimising the dosage of a dispersant and the relationship to flocculation - 2. Classification of dispersants - 3. Dispersion of high surface area carbon black pigment with SA dispersant - 4. Developing an effective MA dispersant and impact on millbase viscosity - 4A : Carbon black dispersion gloss and colour strength when let down into an industrial white base - 4B. Pigment yellow 42 gloss and colour strength when let down into an industrial white base - 5. SEM images of transparent iron oxides. Yellow iron oxide and red - 6. Millbase viscosity and particle size at different concentrations of transparent iron oxide - 7. Transparent iron oxide millbase viscosity and particle size at different loadings of dispersant - 8. Opacity of yellow iron oxide dispersions in an automotive clear coat vs milling time - 9. Particle size distributions of pigment dispersion during the milling process - 10. Relationship between particle size and opacity for yellow iron oxide dispersion - 11. Dispersion of TiO2 with MA dispersant vs competitive controls - 12. Performance of MA dispersant on TiO2 pigments - 13. Top : Corrosion testing of TiO2 dispersion in acrylic coating. Corrosion testing of titanium dioxide dispersion in 2K epoxy coatingEn ligne : https://drive.google.com/file/d/1LK7BYCe6RuKv0-sshcv8uZlAneuTPHTl/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31021
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 208, N° 4644 (09/2018) . - p. 26-30[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20192 - Périodique Bibliothèque principale Documentaires Disponible Determining mechanical properties at every stroke / Kilian Dietl in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 12 (12/2019)
PermalinkDeveloping an automotive crashbox for a mass market vehicle / Damien Guillon in JEC COMPOSITES MAGAZINE, N° 87 (03/2014)
PermalinkDeveloping and evaluating early rain resistance in exterior architectural coatings / Shelby Kellogg in COATINGS TECH, Vol. 15, N° 8 (08/2018)
PermalinkDevelopment of glass fiber-PET hybrid yarn for thermoplastic composites / Melis Eldem Heper in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
PermalinkDéveloppement et caractérisation des rachis de plumes de poulet, de la sciure et du matériau composite hybride HDPE / Gayatri Uppalapati in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 28, N° 4 (10-11-12/2018)
PermalinkDurable water-borne wood coatings / Peter Greenwood in EUROPEAN COATINGS JOURNAL (ECJ), N° 7-8 (07-08/2018)
PermalinkDynamic characterisation of a carbon fibre-reinforced composite (CFRC) in ballistic ranges / F. Plassard in JEC COMPOSITES MAGAZINE, N° 76 (10-11/2012)
PermalinkEco-friendly leather dyeing using ultrasound technique / Mohamed Abu Sayid Mia in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 6 (06/2020)
PermalinkEffect of an amphoteric chromium-free polymer retanning agent with reactive aldehyde groups on collagen fibers / Wang Xuechuan in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIV, N° 10 (10/2019)
PermalinkEffect of filler content on scratch behavior and tribological performance of polyester/graphene oxide nanocomposite coating / Nedia Gafsi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 5 (09/2021)
PermalinkEffect of hydrophilic chain extenders on properties of hyperbranched waterborne polyurethane / Wang Xuechuan in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 100, N° 2 (03-04/2016)
PermalinkEffect of the varying percentage diss fiber on mechanical behaviour of the based polyester bio-composite / Lakhemissi Touam in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 31, N° 3 (06/2021)
PermalinkEffective protection and repair of the hair from daily weathering / Irene Montano in SOFW JOURNAL, Vol. 144, N° 3 (03/2018)
PermalinkEffects of hydrothermal seawater aging on the mechanical properties and water absorption of glass/aramid/epoxy hybrid composites / Z. A. Oguz in INTERNATIONAL POLYMER PROCESSING, Vol. 36, N° 1 (2021)
PermalinkElectrochemical, spectroscopic and microscopic investigation of PEDOT coated nickel plate from aqueous micellar solutions and its anti-corrosion performances / Z. Aouzal in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 3 (05/2023)
PermalinkEnergy-efficient and formaldehyde-free coating technology for glass fibers / Michael Karnop in CHEMICAL FIBERS INTERNATIONAL, Vol. 69, N° 1 (03/2019)
PermalinkPermalinkEPI : propriétés d'anti-perforation, point sur la situation actuelle / Jean-Claude Cannot in CTC ENTREPRISES, (11-12/2017)
PermalinkEquipements de protection individuelle pour la pratique sportive ou les loisirs in TEXTILES A USAGES TECHNIQUES (TUT), N° 40 (2e trimestre 2001)
PermalinkEssais physiques des cuirs / Roland Cortès / 1979
Permalink