Accueil
Catégories
> Essais de résilience
Essais de résilienceVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
A350 XWB composite bonded repair / Sébastien Hanser in JEC COMPOSITES MAGAZINE, N° 128 (05-06/2019)
[article]
Titre : A350 XWB composite bonded repair : New technology for new aircraft Type de document : texte imprimé Auteurs : Sébastien Hanser, Auteur ; Guillaume Ferrer, Auteur ; Sébas Dupouy, Auteur Année de publication : 2019 Article en page(s) : p. 44-46 Langues : Anglais (eng) Catégories : Assemblages à boulons
Avions -- Entretien et réparations
Compactage
Composites à fibres de carbone
Ensachage
Essais de résilience
Films adhésifs
Foudre, Protection contre la
Matériaux -- Imprégnation
Traîtements de surfaceIndex. décimale : 668.4 Plastiques, vinyles Résumé : Even if composite repairs are not new at Airbus, the extensive use of Carbon Fibre Reinforced Plastic (CFRP) on the A350 XWB and especially on primary non-removable parts, is driving the development and the industrialisation of new composite-specific repair solutions. As published in Airbus FAST magazine 61 - March 2018. Note de contenu : - COMBINING LEGACY AND ADVANCED INNOVATIVE SOLUTIONS
- ADAPTIVE THE REPAIR TYPE TO THE SITUATION : Quick but temporary bolted metallic doubler - Permanent bolted pre-cured CFRP repair (but not flush) - Permanent bonded flush repair
- A BONDED REPAIR, FROM START TO FINISH : Damage assessment - Damage removal - Stepping design for bonded repair - Surface preparation - The water-break test - Thermal profile - Repairing with pre-impregnated materials and film adhesives - Compaction - Vacuum bagging (internal/external) - Cure cycle - Restoration of lightning strike protection - Internal bolted repair embodiment - Final post repair inspections before return to service - System and internal equipment re-installation
- Fig. 1 : A complex repair, mixing bolted an dbonded techniques
- Fig. 2 : Principle of vacuum bagging
- Fig. 3 : Restoration of lightning strike protectionPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32539
in JEC COMPOSITES MAGAZINE > N° 128 (05-06/2019) . - p. 44-46[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20914 - Périodique Bibliothèque principale Documentaires Disponible Abrasion resistance of polymer and polymer–ceramic composite coatings for steel hydraulic structures / P. V. Vijay in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 2 (03/2020)
[article]
Titre : Abrasion resistance of polymer and polymer–ceramic composite coatings for steel hydraulic structures Type de document : texte imprimé Auteurs : P. V. Vijay, Auteur ; Piyush R. Soti, Auteur ; Derrick A. Banerjee, Auteur ; Konstantinos A. Sierros, Auteur Année de publication : 2020 Article en page(s) : p. 401-411 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Anticorrosion
Essais de résilience
Matériaux céramiques
Mouillabilité
Mouillage (chimie des surfaces)
Polyéthylène haute densité
Profilométrie
Résistance à l'abrasion
Résistance à l'usure
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : There is an increased demand for abrasive wear-resistant coatings that add durability to steel hydraulic structures, particularly for those subjected to flowing water with debris and alternate wet/dry cycles. These coating systems provide not only corrosion and chemical resistance, but also good erosion and abrasion resistance to the metallic surfaces, which are constantly exposed to flowing water containing sand particles and debris. Generally, vinyl-based coatings are used on hydraulic steel structures to protect them from corrosion and abrasion. However, due to the existence of high water force and debris, the coating is abraded at a faster rate leading to significant maintenance and repair costs. In this study, abrasive wear resistance of conventional vinyl-based coating systems currently used on lock and dam steel structures by U.S. Army Corps of Engineers has been compared with polymer matrix composite coatings, fibrous polymer coatings, and ultrahigh molecular weight polyethylene (UHMWPE). Six coating systems were evaluated through two-body abrasion tests using a reciprocating abrader under dry and wet conditions. Furthermore, wettability of the coating systems and its effect on the wear rate under the presence of water was studied. In addition, scanning electron microscopy of the wear tracks on different coatings was conducted to study and identify their failure mechanisms. Based on the results, UHMWPE and polymer–ceramic composite coatings were found to perform significantly better than the conventional vinyl-based coatings. Note de contenu : - EXPERIMENTAL DETAILS : Coating systems - Surface preparation for application of coatings - Wear tests - Surface wettability
- RESULTS AND DISCUSSION : Depth and volume of coating abrasion - Rate of abrasive wear - Effect of surface wettability - Wear mechanisms and failure of coatings - Field implementation and inspection of coatingsDOI : https://doi.org/10.1007/s11998-019-00286-3 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-019-00286-3.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33991
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 17, N° 2 (03/2020) . - p. 401-411[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21658 - Périodique Bibliothèque principale Documentaires Disponible Accelerated weathering of oligomers by UV-B / Inwhan Oh in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4666 (12/2020)
[article]
Titre : Accelerated weathering of oligomers by UV-B Type de document : texte imprimé Auteurs : Inwhan Oh, Auteur ; Hak-Yul Kim, Auteur ; Sungseo Cho, Auteur ; Indrajit Bhattacharya, Auteur Année de publication : 2020 Article en page(s) : p. 18-21 Langues : Anglais (eng) Catégories : Copolymère uréthane acrylate
Essais de résilience
Oligomères
Photoréticulation
Polymères -- Effet du rayonnement ultraviolet
Polymères -- Détérioration
Polymères aliphatiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : Ultra Violet (UV) energy curing is one of the fastest crosslinking techniques used to dry coatings. UV curable coatings are also one of the most environmentally friendly coating systems as they are typically solvent-free (extremely low VOC/HAPS). Oligomers being almost 100% solids (ppm level solvent residues) have low to medium average molecular weights. Hence, they are liquid at room temperatures. Some oligomers contain some monomers to help reduce their viscosity, to make it easy for the formulator to handle them. However, some industry players do not believe UV curing is really a good solution for outdoor durable coatings. Hence, Miwon Specialty Chemical Co Ltd (MSC) decided to study the performance of some its aliphatic urethane acrylates under accelerated conditions to determine their durability. This paper discusses the tests and the performance that can be achieved when certain well-designed oligomers are exposed to harsh conditions. Note de contenu : - UV curing
- Weathering test equipment
- Preparing the test
- Exposure test and results
- Table 1 : Description of oligomers
- Table 2 : Results using ASTM G154 cycle B test for the five products
- Table 3 : Measurements taken after 1500hr and 2000hr
- Table 4 : Results after testing to ASTM G154 at 1000hr
- Table 5 : Results after testing to ASTM G154 at 2000hrEn ligne : https://drive.google.com/file/d/15yJ7l-CBWLmw0F4QT0uzIQzdG-z6gbGO/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36740
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 210, N° 4666 (12/2020) . - p. 18-21[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23119 - Périodique Bibliothèque principale Documentaires Disponible Adhésifs. Essai de tenue au choc par cisaillement du joint adhésif - Norme NF EN ISO 9653 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
Titre de série : Adhésifs Titre : Essai de tenue au choc par cisaillement du joint adhésif - Norme NF EN ISO 9653 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 2001 Importance : Pagination multiple Présentation : ill. Format : 30 cm Note générale : Annexe Catégories : Adhésifs -- Normes
Assemblages collés
Cisaillement (mécanique)
Essais de résilience
Matières plastiques
Résistance au chocsIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Le présent document prescrit une méthode d'essai pour la détermination de l'énergie absorbée par une éprouvette collée lorsqu'elle est cisaillée par un marteau d'une machine d'impact de type pendule.
La méthode est en principe applicable à des joints collés de bois ou de métaux mais elle peut être étendue à des joints collés de plastiques ainsi qu'aux combinaisons de ces substrats.Indice de classement : T 76-115 Classification ICS : 83.180 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20656 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16041 T 76-115 Norme Bibliothèque principale Documentaires Disponible Adhésifs pour cuir et matériaux pour articles chaussants. Détermination de la température optimale d'activation et de la durée maximale d'activation des adhésifs à base de solvant et en dispersion - Norme NF EN 12961 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
Titre de série : Adhésifs pour cuir et matériaux pour articles chaussants Titre : Détermination de la température optimale d'activation et de la durée maximale d'activation des adhésifs à base de solvant et en dispersion - Norme NF EN 12961 Type de document : texte imprimé Auteurs : Association Française de Normalisation (Paris) , Auteur Editeur : Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) Année de publication : 2001 Importance : 8 p. Présentation : ill. Format : 30 cm Catégories : Adhésifs -- Normes
Adhésifs en phase solvant
Caoutchouc
Chaussures
Cuir
Essais (technologie) -- Normes
Essais de résilience
Essais dynamiques
Matières plastiques
Mesure
Pelage
Réactions chimiques
TempératureIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Le présent document définit la méthode de détermination de la température optimale d'activation par la chaleur, et la durée maximale d'activation d'adhésifs à base de solvant ou en dispersion appliqués sur des supports, principalement fondée sur les exigences relatives aux adhésifs de fixation de la semelle. Indice de classement : T 76-319 Classification ICS : 83.180 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20688 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16074 T 76-319 Norme Bibliothèque principale Documentaires Disponible Adhésifs pour papier et carton, emballage et produits sanitaires jetables. Détermination de la flexibilité à basse température ou de la température de fissuration à froid - Norme NF EN 12703 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2000)
PermalinkAdhésifs pour papier et carton, emballage et produits sanitaires jetables. Détermination de la résistance au cisaillement - Norme NF EN 12960 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
PermalinkAdhésifs pour papier et carton, emballage et produits sanitaires jetables. Détermination de la résistance à la traction et de l'allongement - Norme NF EN 1896 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
PermalinkAdhésifs pour papier et carton, emballage et produits sanitaires jetables. Essai de pelage en "T" à 180° pour un assemblage flexible sur flexible - Norme NF EN 1985 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2002)
PermalinkAdhesive bonding to replace soldering of power modules / Arno Maurer in ADHESION - ADHESIVES + SEALANTS, Vol. 14, N° 2/2017 (2017)
PermalinkAdhesives for battery applications / Sergio Grunder in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 2/2019 (2019)
PermalinkAircraft nose landing gear doors manufactured lighter and faster using high-performance foam core / Uwe Lang in JEC COMPOSITES MAGAZINE, N° 93 (12/2014)
PermalinkALBIDUR, dur mais flexible à l'impact / Fabian Eichenberger in DOUBLE LIAISON, N° 607 (10/2015)
PermalinkAmélioration des performances des gilets pare-balles par de nouveaux matériaux in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 23, N° 2 (05-06-07-08/2013)
PermalinkAn anti-corrosion coating with self-healing function of polyurethane modified by lipoic acid / Zhentao Cai in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 2 (03/2023)
PermalinkAn effective way to prepare high performance biomass-based fatliquoring agent - Bromination modification of rapeseed oil and its fatliquoring and flame-retardant properties / Tao Luo in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVIII, N° 8 (08/2023)
PermalinkAnalyse de la tenue d’éprouvettes trouées composites tissées 3D sous sollicitations de compression au moyen d’un dialogue essais/calculs / Antoine Hurmane in MATERIAUX & TECHNIQUES, Vol. 104, N° 4 (2016)
PermalinkAnomalies of pigskin structure / R. Monastyrska-Przybylak in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 66 (Année 1982)
PermalinkAnti-scratch additive for water-based wood coatings / Michelle Bauer in COATINGS TECH, Vol. 17, N° 8 (08/2020)
PermalinkAP-PLY : A new fibre placement architecture for fabric replacement / Martin Nagelsmit in SAMPE JOURNAL, Vol. 47, N° 2 (03-04/2011)
PermalinkApplication of L-ascorbic acid as an antioxidative colorment in leather finishing / Sultan Civi in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVII, N° 5 (05/2022)
PermalinkApproche expérimentale et modélisation du comportement en compression confinée quasi statique et dynamique PMMA in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 22, N° 1 (01-02-03-04/2012)
PermalinkAssessing paint coatings using mandrel bend tests / John Fletcher in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4598 (07/2014)
PermalinkAutomotive clear coating : A comprehensive look at substrates, testing standards and features / Mukesh Kumar Madhup in PAINTINDIA, Vol. LXXXIII, N° 11 (11/2023)
PermalinkPermalinkBinding together - whatever the weather / Maurille Secher in EUROPEAN COATINGS JOURNAL (ECJ), N° 3 (03/2020)
PermalinkBio-based composites for high-performance materials / Wirasak Smitthipong / Boca Raton [Etats-Unis] : CRC Press - Taylor Francis Group (2015)
PermalinkBio-inspired fabrication of superhydrophilic and underwater superoleophobic alumina membranes for highly efficient oil/water separation / Wenjin Zhou in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 2 (03/2021)
PermalinkA biobased, zero-VOC coalescent for architectural and industrial coatings / Zuzanna Donnelly in COATINGS TECH, Vol. 18, N° 10 (10/2021)
PermalinkBlend ratios of corn husk fiber-polypropylene reinforced composite / B. Geethamanohari in CHEMICAL FIBERS INTERNATIONAL, Vol. 64, N° 1 (03/2014)
PermalinkChemically modified castor oil for softening of leather - A novel approach / Bindia Sahu in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVI, N° 4 (04/2021)
PermalinkChromic textiles : Colour fastness properties and irreversible colour change behaviour of textiles screen printed with thermochromic, photochromic and hydrochromic colourants / Isabel Cabral in COLORATION TECHNOLOGY, Vol. 139, N° 2 (04/2023)
PermalinkPermalinkCoating properties of 1H,1H-perfluorooctylamine-terminated polyimides based on hexafluoroisopropylidene diphthalic anhydride and 1,4,5,8 naphthalenetetracarboxylic dianhydride / Mustafa Cakir in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 3 (05/2019)
PermalinkA comparative analysis of the effect of post production treatments and layer thickness on tensile and impact properties of additively manufactured polymers / Cagin Bolat in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 2 (2023)
PermalinkComparative examination of adhesive and cohesive properties of fluorinated coatings on stone/tile surfaces / Hau-Nan Lee in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 6 (11/2014)
PermalinkA comparative study of uniaxial and biaxial breaking stress and strain profiles of goat upper / M. D. Naresh in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 85, N° 2 (03-04/2001)
PermalinkComparison of the wear behavior and hardness of vinylester resin reinforced by glass fiber and nano ZrO2 and Fe3O4 / Jawad K. Oleiwi in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 31, N° 6 (12/2021)
PermalinkA comparison of two tear tests for leather / R. Guy in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 59 (Année 1975)
PermalinkComportement à l'impact des composites hautes performances en carbone/polymères moulés par compression / Georges Kamgaing Somoh in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 25, N° 1 (01-02-03/2015)
PermalinkComprehensive study on the electrochemical, morphological, and adhesion properties of Cr-free thin film: with and without polyurethane coating / Shamim Roshan in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 3 (05/2021)
PermalinkPermalinkPermalinkPermalinkPermalinkPermalinkLes contrôles physico-mécaniques pour l'industrie de la chaussure / H. Pronier / Lyon : Centre Technique du Cuir
PermalinkLa corrosion des métaux / André Hache / Paris : Presses Universitaires de France (1959)
PermalinkCorrosion resistance of functionalized carbon nanotubes enhanced epoxy coatings on sintered NdFeB magnets / Hongyi yang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 5 (09/2022)
PermalinkCritical strain as a parameter in failure determination / Otto Skrabala in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
PermalinkCuir. Détermination de l'extension et de la résistance à la traction de la fleur d'un cuir - Méthode de la bille - Norme ISO 3379 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1976)
PermalinkCuir - Essais de solidité des teintures. Solidité des teintures à la goutte d'eau - Norme NF EN ISO 15700 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
PermalinkCure-on-demand, ultra-high-solid nonskid coatings through frontal polymerization in COATINGS TECH, Vol. 20, N° 1 (01-02/2023)
PermalinkDamping, thermal and mechanical analyses of polycarbonate/cerium oxide composites for structural applications / R. Karuppasamy in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 3 (07/2019)
PermalinkDesign of pigment dispersants for high-performance applications / Andrew Shooter in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4644 (09/2018)
PermalinkDetermining mechanical properties at every stroke / Kilian Dietl in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 12 (12/2019)
PermalinkDeveloping an automotive crashbox for a mass market vehicle / Damien Guillon in JEC COMPOSITES MAGAZINE, N° 87 (03/2014)
PermalinkDeveloping and evaluating early rain resistance in exterior architectural coatings / Shelby Kellogg in COATINGS TECH, Vol. 15, N° 8 (08/2018)
PermalinkDevelopment of glass fiber-PET hybrid yarn for thermoplastic composites / Melis Eldem Heper in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
PermalinkDéveloppement et caractérisation des rachis de plumes de poulet, de la sciure et du matériau composite hybride HDPE / Gayatri Uppalapati in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 28, N° 4 (10-11-12/2018)
PermalinkDurable water-borne wood coatings / Peter Greenwood in EUROPEAN COATINGS JOURNAL (ECJ), N° 7-8 (07-08/2018)
PermalinkDynamic characterisation of a carbon fibre-reinforced composite (CFRC) in ballistic ranges / F. Plassard in JEC COMPOSITES MAGAZINE, N° 76 (10-11/2012)
PermalinkEco-friendly leather dyeing using ultrasound technique / Mohamed Abu Sayid Mia in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 6 (06/2020)
PermalinkEffect of an amphoteric chromium-free polymer retanning agent with reactive aldehyde groups on collagen fibers / Wang Xuechuan in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIV, N° 10 (10/2019)
PermalinkEffect of filler content on scratch behavior and tribological performance of polyester/graphene oxide nanocomposite coating / Nedia Gafsi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 5 (09/2021)
PermalinkEffect of hydrophilic chain extenders on properties of hyperbranched waterborne polyurethane / Wang Xuechuan in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 100, N° 2 (03-04/2016)
PermalinkEffect of the varying percentage diss fiber on mechanical behaviour of the based polyester bio-composite / Lakhemissi Touam in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 31, N° 3 (06/2021)
PermalinkEffective protection and repair of the hair from daily weathering / Irene Montano in SOFW JOURNAL, Vol. 144, N° 3 (03/2018)
PermalinkEffects of hydrothermal seawater aging on the mechanical properties and water absorption of glass/aramid/epoxy hybrid composites / Z. A. Oguz in INTERNATIONAL POLYMER PROCESSING, Vol. 36, N° 1 (2021)
PermalinkElectrochemical, spectroscopic and microscopic investigation of PEDOT coated nickel plate from aqueous micellar solutions and its anti-corrosion performances / Z. Aouzal in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 3 (05/2023)
PermalinkEnergy-efficient and formaldehyde-free coating technology for glass fibers / Michael Karnop in CHEMICAL FIBERS INTERNATIONAL, Vol. 69, N° 1 (03/2019)
PermalinkPermalinkEPI : propriétés d'anti-perforation, point sur la situation actuelle / Jean-Claude Cannot in CTC ENTREPRISES, (11-12/2017)
PermalinkEquipements de protection individuelle pour la pratique sportive ou les loisirs in TEXTILES A USAGES TECHNIQUES (TUT), N° 40 (2e trimestre 2001)
PermalinkEssais physiques des cuirs / Roland Cortès / 1979
PermalinkEtude expérimentale des effets d'un choc laser sur des assemblages collés de composites dans le cas d'un joint faible / Romain Ecault in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 24, N° 1 (01-02-03/2014)
PermalinkÉtude expérimentale et numérique de l’adhérence d’interfaces collées soumises à des ondes mécaniques brèves et intenses / Michel Arrigoni in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 25, N° 2 (04-05-06/2015)
PermalinkEtude de la modification des propriétés physico-chimiques des cuirs box à fleur naturelle sous l'influence de la transpiration artificielle / Florin Platon C. in REVUE TECHNIQUE DES INDUSTRIES DU CUIR, Vol. LXIII (Année 1971)
PermalinkExpanded applications and enhanced durability of alkyd coatings using high-performance catalysts / Joshua Halstead in COATINGS TECH, Vol. 20, N° 3 (05-06/2023)
PermalinkExperimental analysis on refractory properties of tall buildings / Ya Wang in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 29, N° 2 (04/2019)
PermalinkExperimental investigation of tensile properties in a glass-epoxy sample manfuactured by vacuum infusion, vacuum bag and hand layup process / Amin Abbasi Talabari in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 29, N° 3 (06/2019)
PermalinkExploring the use of bio-derived, isosorbide-based polyols in the synthesis of high-performance polyurethanes / Jiae Kim in SURFACE COATINGS INTERNATIONAL, Vol. 105.4 (07-08/2022)
PermalinkFabrication method of large-scale and mechanically durable superhydrophobic silicon rubber/aerogel coating on fibrous substrates / Nowrouz Mohammad Nouri in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 2 (03/2017)
PermalinkFabrication of superhydrophobic cotton fabric treated with n-dodecyltrimethoxysilane/zirconium oxychloride for highly efficient oil/water separation / Weijing Zhao in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 3 (05-06/2020)
PermalinkFacile synthesis of fluorine-free, hydrophobic, and highly transparent coatings for self-cleaning applications / Abderrahmane Hamdi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 3 (05/2021)
PermalinkFatigue behavior and climatic cycle testing of large bonded attachments / Ivo Drisga in ADHESION - ADHESIVES + SEALANTS, Vol. 15, N° 3/2018 (2018)
PermalinkField testing and ecotoxicity of acrylate-based sol–gel coatings in fresh and seawater / Damir Hamulic in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 2 (03/2023)
PermalinkLa filière plastique mise sur les fibres naturelles / Charlyse Pouteau in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 856 (04/2008)
PermalinkPermalinkFunctionalization of cotton fabric with nanosized TiO2 coating for self-cleaning and antibacterial property enhancement / Gulumser Doganli in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 2 (03/2016)
PermalinkGants de protection contre les risques mécaniques / Institut Français du Textile Habillement in TEXTILES A USAGES TECHNIQUES (TUT), N° 53 (3e trimestre 2004)
PermalinkPermalinkGrain crack and burst strength / Karl Flowers in INTERNATIONAL LEATHER MAKER (ILM), N° 37 (09-10/2019)
PermalinkGreater value in combination / Peter Krümpel in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 1 (01/2014)
PermalinkHas the coatings industry found a total powder system alternative ? / Andrew Cockcroft in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 194, N° 4481 (10/2004)
PermalinkHealable composites and their performance through mechanical and durability testing / Nathan Hostettler in JEC COMPOSITES MAGAZINE, N° 128 (05-06/2019)
PermalinkHigh-strength and high-toughness spray-type polyurea coating for impact protection of aluminum sheet / Hui Guo in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 6 (11/2023)
PermalinkHigh temperature RTM370 polyimide composites fabricated by RTM : characterization and impact testing / K. C. Chuang in SAMPE JOURNAL, Vol. 49, N° 5 (09-10/2013)
PermalinkHolistic evaluation of industrial adhesives / Martin Brandtner-Hafner in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 4/2020 (2020)
PermalinkHow substrate variation affects adhesive bond safety / Martin Brandtner-Hafner in ADHESION - ADHESIVES + SEALANTS, Vol. 18, N° 4/2021 (2021)
PermalinkHubble bubble rising / Vijay Datta in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 34, N° 12 (12/2017)
PermalinkIdentification du comportement mécanique des matériaux à l'aide d'essais de micro-impact répétés / H. Al Baida in MATERIAUX & TECHNIQUES, Vol. 102, N° 6/7 (2014)
PermalinkIls subissent les pires épreuves pour votre sécurité in TEXTILES A USAGES TECHNIQUES (TUT), N° 78 (12/2010 - 01-02/2011)
PermalinkImpact des nouvelles normes EN ISO 20344 et 20345:2011 / Jean-Claude Cannot in CTC ENTREPRISES, (10/2012)
PermalinkImpact of flax seed protein and beeswas emulsion blend on leather finishing - A novel eco-benign formulation / Bindia Sahu in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVIII, N° 8 (08/2023)
PermalinkImpacts faibles énergies et compressions sur panneaux raidis stratifiés / François-Xavier Irisarri in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 25, N° 2 (04-05-06/2015)
PermalinkImproved surface resistance of matte wall paint by using talc / Veli Kilpeläinen in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 207, N° 4632 (06/2017)
PermalinkImproving impact performance in D-LFT composites with UD-glass tapes / Daniel Grauer in JEC COMPOSITES MAGAZINE, N° 74 (07-2012)
PermalinkImproving tearing resistance of leather - Part 2 - Prevention and treatment of low tearing strength in the tannery / Ricardo A. Tournier in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVII, N° 1 (01/2022)
PermalinkImproving the performance of GFRP using nanosilica / Sathis Kumar Selvarayan in JEC COMPOSITES MAGAZINE, N° 127 (03-04/2019)
PermalinkIndustrie des rubans adhésifs. Mesure de la résistance au déchirement par la métohde du pendule - Norme NF EN 12025 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la résistance à l'impact - Norme NF EN 12030 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkIndustrie des rubans adhésifs. Mesure de la tenue à la température et humidité élevées - Norme NF EN 12024 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1996)
PermalinkInfluence of impingement flows with sand particles on the barrier properties of organic coatings / Amin Vedadi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 4 (07/2023)
PermalinkInfluence of preload type on the low velocity impact response of glass fiber reinforced thermoplastic composites / H. Kandas in INTERNATIONAL POLYMER PROCESSING, Vol. XXXV, N° 2 (05/2020)
PermalinkInfluence of surface modification on thermal, adhesive properties and impact behavior of TPU films for laminated glass / Chenxing Zhang in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 3 (2022)
PermalinkInfluence of the collagen fibre bundle arrangements on the qualitative aspect of Nile Tilapia (Oreochromis niloticus) leather in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 107, N° 4 (07-08/2023)
PermalinkInnovative approach for non-flammable transparent FRP in JEC COMPOSITES MAGAZINE, N° 107 (08-09/2016)
PermalinkInnovative assessment concept for qualitative adhesive selection / Martin Brandtner-Hafner in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 2/2019 (2019)
PermalinkInvestigation of the adhesion of NbN coatings deposited by pulsed dc reactive magnetron sputtering using scratch tests / Yasar Totik in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 4 (07/2010)
PermalinkISO/ASME compliant composite pipe repair system Belzona SuperWrap II / Yusuke Nishi in JEC COMPOSITES MAGAZINE, N° 151 (06-07/2023)
PermalinkLatest developments in scratch tests / Ingrid Bloß zehntner in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 207, N° 4634 (09/2017)
PermalinkLeather finishing : Preparation and application of cationic organosilicone/polyurethane micro-emulsion / Shen Yiding in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 91, N° 3 (05-06/2007)
PermalinkLoad-bearing behaviour of rods glued in hardwood / Olivier Bletz-Mühldorfer in ADHESION - ADHESIVES + SEALANTS, Vol. 15, N° 4/2018 (2018)
PermalinkPermalinkPermalinkPermalinkMatières plastiques. Polyéthylène (PE) pour systèmes de canalisations. Détermination du facteur d'intensité de contrainte limite - Méthode d'essai - Norme NF T 54-078 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1992)
PermalinkMatières plastiques. Produits allégés en matières plastiques. Essai de résistance au choc - Norme NF T 54-505 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1976)
PermalinkMechanical characterization of randomly oriented short Sansevieria Trifasciata natural fibre composites / E. Fantin Irudaya Raj in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 5 (2023)
PermalinkMetakaolin-based geopolymer coatings on metals by airbrush spray deposition / Yangwu Mao in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 4 (07/2020)
PermalinkMetal substitution with improved PA / Jens Cremer in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 10 (2020)
PermalinkMéthodes d'essais des matériaux de chapes. Partie 4 : Détermination de la résistance à l'usure BCA - Norme NF EN 13892-4 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2003)
PermalinkMéthodes d'essais des matériaux de chapes. Partie. 5 : Détermination de la résistance à l'usure par roulette pivotante des matériaux de chape avec couche d'usure - Norme NF EN 13892-5 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2004)
PermalinkMODAFLOW NSR 100, a novel nanosilica additive for excellent scratch resistance / M. Goedegebuure in SURFACE COATINGS INTERNATIONAL, Vol. 104.3 (05-06/2021)
PermalinkMoving beyond the 25-year coating / Todd Williams in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 34, N° 12 (12/2017)
PermalinkMultifunctional coating based on nano fillers and natural substances / Roberto Cafagna in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4647 (12/2018)
PermalinkNanotechnology : A new vision of coating technology / Raul Arvind in PAINTINDIA, Vol. LX, N° 9 (09/2010)
PermalinkNew liquid crystal polyester filament yarns / Kota Nakamura in CHEMICAL FIBERS INTERNATIONAL, Vol. 68, N° 4 (12/2018)
PermalinkNew non-isocyanate moisture curable silylated resin for protective coating applications / Michael Seeber in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 207, N° 4635 (10/2017)
PermalinkNew trends in BCF yarn for automotive carpeting / Piero Saragat in CHEMICAL FIBERS INTERNATIONAL, Vol. 69, N° 1 (03/2019)
PermalinkNew trends in BCF yarn for automotive carpeting / Piero Saragat in CHEMICAL FIBERS INTERNATIONAL, (10/2019)
PermalinkNovel metal-free catalysts for epoxy carboxy coatings / Ravi Ravichandran in COATINGS TECH, Vol. 16, N° 3 (03/2019)
PermalinkPermalinkOptimiser la dispersion des nanoparticules / Jérémie Soulestin in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 871 (11/2009)
PermalinkOptimizing leaf springs via enhanced composite solutions / Pascal Albrecht in JEC COMPOSITES MAGAZINE, N° 128 (05-06/2019)
PermalinkOrganoclay-assisted vat dyeing of polypropylene nanocomposite fabrics / Yehya A. Youssef in COLORATION TECHNOLOGY, Vol. 137, N° 6 (12/2021)
PermalinkPeintures et vernis. Détermination de la dureté du feuil par l'essai de dureté crayon - Norme ISO 15184 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2012)
PermalinkPeintures et vernis. Détermination de la résistance à l'abrasion - Partie 1 : Méthode utilisant une route revêtue de papier abrasif - Norme ISO 7784-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1997)
PermalinkPeintures et vernis. Détermination de la résistance à l'abrasion - Partie 3 : Méthode de panneau d'essai animé d'un mouvement de va-et-vient - Norme ISO 7784-3 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2000)
PermalinkPeintures et vernis. Détermination de la résistance à la détérioration - Norme ISO 12137 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2011)
PermalinkPeintures et vernis. Détermination de la résistance à la détérioration - Partie 1 : Méthode utilisant un stylet arrondi - Norme ISO 12137-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1997)
PermalinkPeintures et vernis. Détermination de la résistance à la détérioration - Partie 1 : Méthode utilisant un stylet pointu - Norme ISO 12137-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1997)
PermalinkPeintures et vernis. Détermination de la résistance à l'humidité - Norme ISO 6270-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1998)
PermalinkPeintures et vernis. Détermination de la résistance aux liquides - Partie 1 : immersion dans des liquides autres que l'eau - Norme ISO 2812-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2007)
PermalinkPeintures et vernis. Détermination de la résistance aux liquides - Partie 2 : Méthode au four à gradient - Norme ISO 2812-5 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2007)
PermalinkPeintures et vernis. Détermination de la résistance aux liquides - Partie 2 : Méthode par immersion dans l'eau - Norme ISO 2812-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2007)
PermalinkPeintures et vernis. Détermination de la résistance aux liquides - Partie 2 : Méthode à la tache - Norme ISO 2812-4 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2007)
PermalinkPeintures et vernis. Détermination de la résistance aux liquides - Partie 2 : Méthode utilisant un milieu absorbant - Norme ISO 2812-3 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2012)
PermalinkPeintures et vernis. Détermination de la résistance à la rayure - Partie 1 : Méthode à charge constante - Norme ISO 1518-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2011)
PermalinkPeintures et vernis. Détermination de la résistance à la rayure - Partie 2 : Méthode à charge variable - Norme ISO 1518-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2011)
PermalinkPeintures et vernis. Détermination de la résistance à la rayure d'un système de peinture sur un poste de lavage automobile de laboratoire - Norme internationale ISO 20566 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2013)
PermalinkPeintures et vernis. Détermination de la résistance des revêtements aux impacts de cailloux - Partie 1 : Essai de chocs multiples - Norme internationale 20567-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2005)
PermalinkPeintures et vernis. Détermination de la résistance des revêtements aux impacts de cailloux - Partie 2 : Essai de choc simple par corps percutant GUID2 - Norme internationale 20567-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2005)
PermalinkPeintures et vernis. Détermination de la résistance des revêtements aux impacts de cailloux - Partie 3 : Essai de choc simple par corps percutant en vol libre - Norme internationale 20567-3 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2012)
PermalinkPeintures et vernis. Essai d'emboutissage - Norme ISO 1520 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2006)
PermalinkPeintures et vernis. Essai de pliage (mandrin conique) / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2006)
PermalinkPeintures et vernis. Essai de pliage sur mandrin cylindrique - Norme ISO 1519 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2011)
PermalinkPeintures et vernis. Essais de corrosion par immersions-émersions alternées dans une solution tamponnée de chlorure de sodium - Norme ISO 15710 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2002)
PermalinkPeintures et vernis. Essais de déformation rapide (résistance au choc) - Partie 1 : Essai de chute d'une masse avec pénétrateur de surface importante - Norme ISO 6272-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2011)
PermalinkPeintures et vernis. Essais de déformation rapide (résistance au choc) - Partie 2 : Essai de chute d'une masse avec pénétrateur de surface réduite - Norme ISO 6272-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2011)
PermalinkPeintures et vernis. Lignes directrices pour la production de rayures au travaers du revêtement de panneaux métalliques en vue des essais de corrosion - Norme internationale ISO 17872 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2007)
PermalinkPerformance enhancement of the anti-corrosion coating based on Ce3+-polyaniline montmorillonite composite/epoxy-ester system / Zhen Hua Zhang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 5 (09/2017)
PermalinkPET recyclé : une nouvelle résine pour la plasturgie / Claude Linz in CAOUTCHOUCS & PLASTIQUES, N° 790 (11/2000)
PermalinkPhosphorus-nitrogen flame retardant waterborne polyurethane/graphene nanocomposite for leather retanning / Peikun Zhang in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIII, N° 5 (05/2018)
PermalinkPlastics. Determination of compressive properties - Norme NF EN ISO 604 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2004)
PermalinkPlastiques. Détermination des caractéristiques au choc Charpy. Partie 2 : Essai de choc instrumenté - Norme NF EN ISO 179-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)
PermalinkPlastiques. Détermination du comportement des plastiques rigides perforés sous l'effet d'un choc. Partie 1 : Essais de choc non instrumentés - Norme NF EN ISO 6603-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2000)
PermalinkPlastiques. Détermination de la résistance au choc Charpy. Partie 1 : Essai de choc non instrumenté - Norme NF EN ISO 179-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2001)
PermalinkPlastiques. Détermination de la résistance au choc Izod - Norme NF EN ISO 180 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2011)
PermalinkPolyamides also like it hot / Herman Cichorek in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 3 (03/2016)
PermalinkPolyamine curing agents meeting the industry need for enhanced productivity / Michael Cook in COATINGS TECH, Vol. 16, N° 3 (03/2019)
PermalinkLes polymères en pointe / Hubert Mueller in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 885 (06/2011)
PermalinkPractical in-plant evaluation of two FBE abrasion-resistant overcoat systems / Emre Aksu in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 33, N° 7 (07/2016)
PermalinkPredicting impact performance / Alain Levêque in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 11 (11/2013)
PermalinkPreparation and properties of nano-ZnO/organic fluorine modified polyacrylate finishing agent / Sui Zhihui in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 6 (06/2020)
PermalinkPreparation of flame-retardant polymer nanocomposite textiles / Aadhar A. Mandot in CHEMICAL FIBERS INTERNATIONAL, (10/2017)
PermalinkPrevention of hair damage during multiple bleachings in PERSONAL CARE EUROPE, Vol. 12, N° 3 (06/2018)
PermalinkPrimed for VOC reduction / Marie Josée Déry-Chauvette in EUROPEAN COATINGS JOURNAL (ECJ), N° 7-8 (07-08/2017)
PermalinkProcessing and wear analysis of blast furnace slag filled polypropylene composites using Taguchi model and ANN / P. K. Padhi in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 2 (05/2014)
PermalinkProduction of thermoplastic elastomers based on recycled PE and ground tire rubber : morphology, mechanical properties and effect of compatibilizer addition / Y.-H. wang in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIII, N° 4 (08/2018)
PermalinkPermalinkPU-coating performance of bio-based hyperbranched alkyd resin on mild steel and wood substrate / Amardip M. Patil in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 3 (05/2021)
PermalinkQualification tests for high-temperature FBE coatings / Hassan Al-Sagour in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 7 (07/2018)
PermalinkPermalinkPermalinkRecommandations, pour évaluer la résistance des semelles anti-perforation textiles / Michel Jacques in HYGIENE & SECURITE DU TRAVAIL, N° 235 (04-05-06/2014)
PermalinkRecycling that gets under the skin / Markus Gall in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 5 (2020)
PermalinkRedevelopment of medieval leathers for the curragh "Brendan's" transatlantic voyage 1976-77 / H. A. Birkin in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 61 et 62 (Années 1977 et 1978)
PermalinkRedevelopment of medieval leathers for the curragh "Brendan's" transatlantic voyage 1976-77 / H. A. Birkin in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 62, N° 3 (05-06/1978)
Permalink