Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Influence of TiO2 on alkyd emulsions / Kathrin Lehmann in EUROPEAN COATINGS JOURNAL (ECJ), N° 11/99 (11/1999)
[article]
Titre : Influence of TiO2 on alkyd emulsions Type de document : texte imprimé Auteurs : Kathrin Lehmann, Auteur Année de publication : 1999 Article en page(s) : p. 39-50 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Brillance (optique)
Dioxyde de titane
Formulation (Génie chimique)
Liants
Oxydation
Pigments inorganiques
Polyalkydes
Revêtements en phase aqueuse -- Séchage:Peinture en phase aqueuse -- SéchageIndex. décimale : 667.9 Revêtements et enduits Résumé : Decorative paint manufacturers have not only developed low-emission or VOC-free indoor emulsion paints, but are also showing growing interest in replacing conventional decorative paints based on long-oil alkyds with aqueous high-gloss emulsion paints without the addition of solvents. This could be of particular interest in future for indoor applications. This paper discusses the influence of various titanium dioxide pigments on the drying behaviour of alkyd emulsions. One area of emphasis in this context is the phenomenon of drying retardation following storage of the paints. A comparative test of white-pigmented paints based on a long-oil alkyd is presented Note de contenu : - Decorative high gloss emulsion paints
- Selection of raw materials : Commercial alkyd emulsions often display stability problems - Insufficient pigment stabilisation and incompatibility - One alkyd emulsion shows stability, high degree of gloss and weak yellowish tone
- Results : Determination of the drying time after 12 weeks - Determination of drying retardation according to inorganic surface treatment - Drying retardation is relatively independently of the pigment group - Cobalt is no longer available in the paint film to catalyse the oxidative drying - Optical properties : Brightness L* and tone b* : - Optical parameters are influenced by the use of a TiO2 and by the selected binder - Overall formulation determine the gloss
Summary : Alkyd emulsions represent a suitable alternative - Acrilic emulsion paints are heavily dependent in their degree of gloss on the TiO2 pigment used - Pigment recommendation for making a smooth transition from one system to the other - Alkyd emulsion paints show drying retardation - Advantages of alkyd emulsions.Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11220
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 11/99 (11/1999) . - p. 39-50[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000611 - Périodique Bibliothèque principale Documentaires Disponible Infrared spectroscopy : its relevance in the field of surface coating / Deepti Shikha in PAINTINDIA, Vol. LX, N° 8 (08/2010)
[article]
Titre : Infrared spectroscopy : its relevance in the field of surface coating Type de document : texte imprimé Auteurs : Deepti Shikha, Auteur ; Rita Awasthi, Auteur Année de publication : 2010 Article en page(s) : p. 87-92 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Epoxydes
Fourier, Spectroscopie infrarouge à transformée de
Polyalkydes
Revêtements -- AnalyseIndex. décimale : 667.9 Revêtements et enduits Résumé : Infrared spectroscopy is an absorption spectroscopy which uses the range of electromagnetic spectra in which a substance absorbs. It is a powerful tool for the identification of compounds in the field of science and technology. In surface coating, binder being a basic raw material, been taken for discussion. The advantages of FTIR over dispersive instrument sampling techniques and interpretation of IR spectra of binders have been also discussed. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=10471
in PAINTINDIA > Vol. LX, N° 8 (08/2010) . - p. 87-92[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012660 - Périodique Bibliothèque principale Documentaires Disponible Integrated life-cycle design of coatings on exterior wood / L. Strömberg in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 87, B2 (06/2004)
[article]
Titre : Integrated life-cycle design of coatings on exterior wood : Part 1: Service life planning Type de document : texte imprimé Auteurs : L. Strömberg, Auteur ; J. Ekstedt, Auteur Année de publication : 2004 Article en page(s) : p. 121-125 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bois -- Revêtements protecteurs
Durée de vie (Ingénierie)
Enrobage (technologie)
Evaluation
Lasures
Polyacryliques
Polyalkydes
Revêtement en phase solvant
Revêtements -- Propriétés physiques
Revêtements en phase aqueuse
StatistiqueIndex. décimale : 667.9 Revêtements et enduits Résumé : In this study, the statistical distribution of the reference service life of exterior wood coatings has been calculated for two coating systems: an alkyd oil and a solvent-borne alkyd (stain). The estimated service life has been evaluated, based on exposure tests and on the assessment of experts for another three coating systems (namely a solvent-borne alkyd coating, a water-borne acrylic coating, and a water-borne acrylic stain). It has been shown that the combination of a standard procedure for the measurement of cracking and statistical tools, such as reliability-based methodologies, for predicting the service life of coating systems gives more information regarding reference service life data than purely by a measurement of cracking. Note de contenu : - EXPERIMENTAL : Materials - Methods - Calculations
- RESULTS AND DISCUSSION : Statistical analysis
- Table 1 : Physical properties of coatings
- Table 2 : The coating systems
- Table 3 : Cracking scores for the radial-cut and tangential-cut samples for the alkyd oil and for the alkyd stain
- Table 4 : The calculated reference service life for the alkyd oil and the alkyd stain
- Table 5 : The estimated service life for the water-borne acrylic stain, the water-borne acrylic coating and the solvent-borne alkyd coatingDOI : 10.1007/BF02699606 En ligne : https://link.springer.com/content/pdf/10.1007/BF02699606.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5472
in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS > Vol. 87, B2 (06/2004) . - p. 121-125[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000391 - Périodique Bibliothèque principale Documentaires Disponible Integrated life-cycle design of coatings on exterior wood / L. Strömberg in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 87, B3 (09/2004)
[article]
Titre : Integrated life-cycle design of coatings on exterior wood : Part 2: Life-cycle assessment Type de document : texte imprimé Auteurs : L. Strömberg, Auteur Année de publication : 2004 Article en page(s) : p. 211-220 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Applications extérieures
Bois -- Revêtements protecteurs
Caractérisation
Durée de vie (Ingénierie)
Fonction de pondération
Normalisation
Polyacryliques
Polyalkydes
Revêtement en phase solvant
Revêtements en phase aqueuse
TeintureIndex. décimale : 667.9 Revêtements et enduits Résumé : This study has shown that the environmental impact from the various studied coatings are the dependent criteria on their service lives. The dependence of these criteria has been studied with the help of the integrated design model, developed in this study especially for coatings on exterior wood.
The integrated design for the overall performance showed that the water-borne acrylic coating and the water-borne acrylic stain are the best choice as regards the environmental impact and durability of the coatings.
The discussed surface coating systems were a solvent-borne alkyd coating, a water-borne acrylic coating, a water-borne crylic stain, a solvent-borne alkyd stain and alkyd oil.Note de contenu : - Characterisation
- Normalisation
- Weighting
- Basis for comparisons
- Life-cycle assessment of coatings on exterior wood
- Life-cycle inventory analysis
- Table 1 : The calculated and estimated service lives for the tested coatings (from part 1 of this paper)
- Table 2 : The results of classification for the whole life cycle of 1m2 coating on exterior wood panel over a period of 50 years
- Table 3 : The calculated annual environmental burdens of the coating systemsDOI : 10.1007/BF02699637 En ligne : https://link.springer.com/content/pdf/10.1007/BF02699637.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5463
in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS > Vol. 87, B3 (09/2004) . - p. 211-220[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000390 - Périodique Bibliothèque principale Documentaires Disponible Intumescent coatings using epoxy, alkyd, acrylic, silicone, and silicone–epoxy hybrid resins for steel fire protection / Andreza P. Cardoso in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 6 (11/2020)
[article]
Titre : Intumescent coatings using epoxy, alkyd, acrylic, silicone, and silicone–epoxy hybrid resins for steel fire protection Type de document : texte imprimé Auteurs : Andreza P. Cardoso, Auteur ; Stéphanie C. de Sá, Auteur ; Carlos H. M. Beraldo, Auteur ; Gelsa E. N. Hidalgo, Auteur ; Carlos A. Ferreira, Auteur Année de publication : 2020 Article en page(s) : p. 1471-1488 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
Copolymère silicone époxy
Epoxydes
Formulation (Génie chimique)
Polyacryliques
Polyalkydes
Protection passive contre l'incendiela protection passive contre l’incendie dans les bâtiments est essentiellement préventive. Elle représente l’ensemble des mesures constructives permettant à un ouvrage ou une partie d’ouvrage de résister à un incendie pendant un temps prédéterminé fixé par la réglementation de construction en vigueur pour le type de bâtiment concerné. Ces mesures sont destinées à : stopper la progression des fumées, éviter la propagation des flammes, maintenir la stabilité au feu des éléments de structure le plus longtemps possible malgré l’action d’un incendie, contenir les effets thermiques le plus longtemps possible à la zone sinistrée.
La principale spécificité de la protection passive est que dès le début d’un incendie, elle fonctionne sans aucune intervention humaine ni aucun apport extérieur d’énergie.
C’est une protection durable, l’efficacité de la plupart des produits utilisés dans la protection passive n’étant pas limitée dans le temps.
Les principaux moyens de la protection passive sont : Pour les structures, le flocage, l’encoffrement, les peintures ou enduits intumescents… Pour le compartimentage, les parois, les portes coupe-feu, les calfeutrements coupe-feu de pénétration de câbles et de tuyaux, les cheminements techniques protégés...
Revêtements organiques
Revêtements protecteurs
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 667.9 Revêtements et enduits Résumé : Intumescent coatings are a great alternative for passive protection of metal substrates against fire, with binder polymer being one of the main components of an intumescent system. The objective of this work was to compare five different resin types (epoxy, acrylic, alkyd, silicone, and silicone–epoxy hybrid) in an intumescent formulation and to study the influence of resin concentration on the fire protection performance of the coating. Results from TGA and MCC analysis of resins and coatings indicated that coatings containing silicone are thermally stable and release smaller amounts of heat. In the fire resistance test, samples containing epoxy and silicone resins had lower temperatures (130–160°C) compared to the other samples. It has also been found that it is possible to decrease resin concentration in formulations containing epoxy and silicone resins up to 25.6% and to maintain or even improve their fire protection capability. Note de contenu : - MATERIALS AND METHODS : Materials - Preparation and formulation of intumescent coatings - Characterization
- RESULTS AND DISCUSSIONS : Characterization of resins - Characterization of intumescent coatings - Char layer characterization - Analysis of the inorganic components present in the char layer compositionDOI : https://doi.org/10.1007/s11998-020-00366-9 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-020-00366-9.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34953
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 17, N° 6 (11/2020) . - p. 1471-1488[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22458 - Périodique Bibliothèque principale Documentaires Disponible Investigation of UV-curable alkyd coating properties / Qianhe Wang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 2 (03/2023)
PermalinkIodinated thermal-fused polymer as a biocidal additive to commercial and chemical-resistant coatings / L. di Ionno in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 87, B4 (12/2004)
PermalinkIron as an alternative drier for curing of high-solid alkyd coatings / Barbara Pirš in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 12, N° 6 (11/2015)
PermalinkL-Lactide chemistry : a safe and renewable building block for sustainable coatings / Armin Michel in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4625 (10/2016)
PermalinkLactide-modified polyester resins with enhanced resin efficiency and improved coating performance / Bas Van Leeuwen in SURFACE COATINGS INTERNATIONAL, Vol. 98.1 (02/2015)
PermalinkPermalinkLa lente ascension des résines végétales / Sylvie Latieule in DOUBLE LIAISON, N° 601 (10/2014)
PermalinkLiants pour peintures et vernis. Résines alkydes - Partie 1 : Méthodes générales d'essai - Norme ISO 6744-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1999)
PermalinkLiants pour peintures et vernis. Résines alkydes - Partie 2 : Détermination de la teneur en anhydride phtalique - Norme ISO 6744-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1999)
PermalinkLiants pour peintures et vernis. Résines alkydes - Partie 3 : Détermination de la teneur en Matière insaponifiable - Norme ISO 6744-3 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1999)
PermalinkLiants pour peintures et vernis. Résines alkydes - Partie 4 : Détermination de la teneur en acides gras - Norme ISO 6744-4 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1999)
PermalinkPermalinkLoVOCoat - The cost effective solution to green low VOC solvent borne alkyds without compromise on performance / Paul Cameron in PAINTINDIA, Vol. LX, N° 3 (03/2010)
PermalinkLow-VOC combination metal drier developed for waterborne alkyds / Thomas Schoenbacher in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4591 (12/2013)
PermalinkMaleinized hyperbranched alkyd resins : structural, thermal, rheological and film properties / Jessica Duarte in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 21, N° 1 (01/2024)
Permalink