Accueil
Catégories
> Revêtements -- Propriétés mécaniques > Peinture -- Propriétés mécaniques
Peinture -- Propriétés mécaniquesVoir aussi |
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le haut et vers le bas
Study of UV-curable coatings for optical fibers / Gexing Shen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 71, N° 891 (04/1999)
[article]
Titre : Study of UV-curable coatings for optical fibers Type de document : texte imprimé Auteurs : Gexing Shen, Auteur ; Xiouning Qu, Auteur ; Wanneng She, Auteur ; Xiaomeng Yu, Auteur ; Qunzhen Sun, Auteur ; Hanning Chen, Auteur Année de publication : 1999 Article en page(s) : p. 53-57 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Copolymère époxy acrylate
Copolymère silicone acrylate
Copolymère uréthane acrylate
Fibres optiques
Réticulation (polymérisation)
Revêtements -- Propriétés mécaniques:Peinture -- Propriétés mécaniques
Revêtements -- Séchage sous rayonnement ultraviolet
Transition vitreuse
ViscoélasticitéIndex. décimale : 667.9 Revêtements et enduits Résumé : Three kinds of UV-curable prepolymers, urethane acrylate (UA), polysilicone acrylate (SA), and epoxy acrylate (EA) were prepared. These prepolymers were mixed in different proportions to modify the properties of an optical fiber coating. The relationships of component-property and structure-property of the mixture coatings were studied. When the proportion was SA:UA:EA=5:4:3, it was used for a single coating, however, the proportion SA:UA:EA=6:5:2 was used for a primary buffer coating. These mixture coatings were applied to optical fibers. Note de contenu : - EXPERIMENTAL : Preparation of the prepolymers - Formulation of UV-curable coatings - Preparation of cured film
- RESULTS AND DISCUSSION : Inter-solubility of prepolymers - Cure rate and mechanical properties of UV-cured prepolymers - Cure rate and mechanical properties of UV cured formulated prepolymers - Determination of cure rate - Glass transition temperature and viscoelastic behavior - Preparation and properties of coating formulations for optical fibersPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17847
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 71, N° 891 (04/1999) . - p. 53-57[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 003559 - Périodique Bibliothèque principale Documentaires Disponible 009605 - Périodique Bibliothèque principale Documentaires Disponible Study on a novel composite coating based on PDMS doped with modified graphene oxide / Jijun Tang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 2 (03/2018)
[article]
Titre : Study on a novel composite coating based on PDMS doped with modified graphene oxide Type de document : texte imprimé Auteurs : Jijun Tang, Auteur ; Wei Yao, Auteur ; Weili Li, Auteur ; Jie Xu, Auteur ; Lei Jin, Auteur ; Jide Zhang, Auteur ; Zexiao Xu, Auteur Année de publication : 2018 Article en page(s) : p. 375-383 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Anticorrosion
Composites
Dispersions et suspensions
Essais de résilience
Oxyde de graphène
PolydiméthylsiloxaneLe polydiméthylsiloxane —[O-Si(CH3)2]n—, ou poly(diméthylsiloxane) selon la nomenclature systématique, communément appelé PDMS ou diméthicone, est un polymère organominéral de la famille des siloxanes souvent présent dans les shampoings. On l'y ajoute pour augmenter le volume des cheveux mais il peut également aller boucher les pores du cuir chevelu et rendre les cheveux gras. C'est une des raisons pour lesquelles se laver les cheveux tous les jours est très déconseillé avec un shampooing contenant des silicones.
Il existe également de l'amodiméthicone, qui est un dérivé du diméthicone.
Le polydiméthylsiloxane est un additif alimentaire (E900), utilisé comme antimoussant dans les boissons (Coca-Cola BlāK).
La chaîne de poly(diméthylsiloxane) forme également la structure de base des huiles et des caoutchoucs silicones.
Réaction de couplage
Réticulants
Revêtements
Revêtements -- Propriétés mécaniques:Peinture -- Propriétés mécaniques
Revêtements:Peinture
Silanes
Sol-gel, Procédé
Tétraéthoxysilane
ThermocinétiqueIndex. décimale : 667.9 Revêtements et enduits Résumé : The low surface activity of graphene oxide (GO) stemming from its large conjugated electronic structure can easily affect the dispersion behavior of GO-based polymer matrices. This significantly undermines the properties of the resulting composite materials. Therefore, in order to increase the GO surface activity for use in polymer-based composites, GO was modified using silane coupling agent which was then doped into polydimethylsiloxane (PDMS) polymer to prepare novel paints by sol–gel reaction strategy. The subsequent novel composite coatings based on PDMS/modified GO (mGO) were finally cured with tetraethoxysilane as the hardening agent in the presence of dibutyltin dilaurate catalyst. The effect of doping mGO into PDMS polymer was systematically studied using infrared spectroscopy, micro-Raman spectroscopy, TEM, SEM, XRD, TGA, mechanical test, thermal conductivity test, and the erosion resistance test. It was concluded that the phase compatibility between GO and PDMS was enhanced due to the new interconnecting chemical bonds brought about by the mGO in the composite. Note de contenu : - EXPERIMENTAL : Materials - Preparations of graphene oxide and chlorination of graphene oxide - Preparation of composite coatings - Characterization
- RESULTS AND DISCUSSION : Materials characterization - Morphological analysis - Thermal stability property - Mechanical properties - Thermal conductivity - Anticorrosion propertyDOI : 10.1007/s11998-017-9991-9 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-017-9991-9.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30296
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 15, N° 2 (03/2018) . - p. 375-383[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19742 - Périodique Bibliothèque principale Documentaires Disponible Study on the chemistry of polyguanidines as precursors for polycarbodiimide crosslinkers in powder coatings / James W. Taylor in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 67, N° 846 (07/1995)
[article]
Titre : Study on the chemistry of polyguanidines as precursors for polycarbodiimide crosslinkers in powder coatings Type de document : texte imprimé Auteurs : James W. Taylor, Auteur ; M. J. Collins, Auteur ; D. R. Bassett, Auteur Année de publication : 1995 Article en page(s) : p. 43-52 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Brillance (optique)
Copolymères
Mélanges (chimie)
Oligomères
Polycarbodiimide
Polyguanidine
Polymères
Polyméthacrylate de méthyleLe poly(méthacrylate de méthyle) (souvent abrégé en PMMA, de l'anglais Poly(methyl methacrylate)) est un polymère thermoplastique transparent obtenu par polyaddition dont le monomère est le méthacrylate de méthyle (MMA). Ce polymère est plus connu sous son premier nom commercial de Plexiglas (nom déposé), même si le leader global du PMMA est Altuglas International9 du groupe Arkema, sous le nom commercial Altuglas. Il est également vendu sous les noms commerciaux Lucite, Crystalite, Perspex ou Nudec.
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.
Réactions chimiques
Réticulants
Réticulation (polymérisation)
Revêtements
Revêtements -- Propriétés mécaniques:Peinture -- Propriétés mécaniques
ThermocinétiqueIndex. décimale : 667.9 Revêtements et enduits Résumé : Polyguanidines thermally decompose into polycarbodiimide crosslinkers. The decomposition rate to polycarbodiimides is shown to accelerate in an acrylic polymer matrix. The half-life of the guanidine moiety is 178 min at 180°C; however, when the polyguanidine is blended in poly(methyl methacrylate), the half-life is reduced to 4.8 min. As a result of the acceleration effect of acrylic polymers, blends of polyguanidines and carboxylic acid-containing polymers which are neutralized with diethyl amine can be processed to form powder coatings which crosslink at elevated temperatures. The gel fractions of cured powder coatings show that adequate crosslinking occurs at about 180°C Note de contenu : - EXPERIMENTAL : Synthetic procedures - Kinetic procedures - Preparation of powder coatings - Gel fraction determinations - Panel evaluations
- RESULTS AND DISCUSSION : Evaluations - Crosslinking efficiency - Optical propertiesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18527
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 67, N° 846 (07/1995) . - p. 43-52[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 003492 - Périodique Bibliothèque principale Documentaires Disponible 003504 - Périodique Bibliothèque principale Documentaires Exclu du prêt Superhydrophobic silicone/SiC nanowire composite as a fouling release coating material / Mohamed S. Selim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 4 (07/2019)
[article]
Titre : Superhydrophobic silicone/SiC nanowire composite as a fouling release coating material Type de document : texte imprimé Auteurs : Mohamed S. Selim, Auteur ; Hui Yang, Auteur ; Feng Q. Wang, Auteur ; Nesreen A. Fatthallah, Auteur ; Li Xue, Auteur ; Yue Li, Auteur ; Yong Huang, Auteur Année de publication : 2019 Article en page(s) : p. 1165-1180 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
Carbure de silicium
Charges (matériaux)
Hydrophobie
Nanofibres
Nanoparticules
PolydiméthylsiloxaneLe polydiméthylsiloxane —[O-Si(CH3)2]n—, ou poly(diméthylsiloxane) selon la nomenclature systématique, communément appelé PDMS ou diméthicone, est un polymère organominéral de la famille des siloxanes souvent présent dans les shampoings. On l'y ajoute pour augmenter le volume des cheveux mais il peut également aller boucher les pores du cuir chevelu et rendre les cheveux gras. C'est une des raisons pour lesquelles se laver les cheveux tous les jours est très déconseillé avec un shampooing contenant des silicones.
Il existe également de l'amodiméthicone, qui est un dérivé du diméthicone.
Le polydiméthylsiloxane est un additif alimentaire (E900), utilisé comme antimoussant dans les boissons (Coca-Cola BlāK).
La chaîne de poly(diméthylsiloxane) forme également la structure de base des huiles et des caoutchoucs silicones.
Revêtement de céramique
Revêtements -- Propriétés mécaniques
Salissures biologiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : A ceramic superhydrophobic series of polydimethylsiloxane/silicon carbide nanowire (SiC NW) composites was designed for marine fouling release (FR) coatings of the ship hull. Single-crystal SiC NWs with 50–80 nm diameters were grown in {111} crystal plane and employed as nanofillers. Ex situ silicone nanocomposites were facilely developed and cured by a mechanism of hydrosilation. The effects of incorporating different nanofiller concentrations on the surface, mechanical, and FR properties of silicone nanocomposites were extensively studied. Surface properties were studied by nonwettability and free energy and characterized via scanning electron and atomic force microscopes. Nanocomposites’ mechanical features were tested as durability factors. Selected microfoulants of fungi and bacterial progenies were used for biological assessments in the laboratory. A field test was performed on the developed coating samples in natural seawater for 3 months in a tropical area. Excellent distributed SiC NWs (0.5 wt%) showed outstanding hydrophobicity with 153° contact angle, 11.25 mN/m free energy of the surface, micro-/nanoscale roughness, and FR properties. Note de contenu : - EXPERIMENTAL : Materials - Synthesis of PDMS and SiC NW composites - Characterization techniques - Determining the coating's superhydrophobicity and SFE - Studying the mechanical properties - Biological examinations
- RESULTS AND DISCUSSION : SiC NWs' characteristics - Fabrication of ceramic silicone FR nanocomposites - Surface nonwetting behavior - FR comparison survey - Mechanical assessments - Assessments of the FR featuresDOI : 10.1007/s11998-019-00192-8 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-019-00192-8.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32871
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 16, N° 4 (07/2019) . - p. 1165-1180[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21127 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Sustainable performance benefits : Environmentally compliant two-component water-borne urethane dispersions Type de document : texte imprimé Auteurs : Ximing Li, Auteur ; Alec Krienen, Auteur ; Gabor Erdodi, Auteur ; Miriam Peralta, Auteur Année de publication : 2023 Article en page(s) : p. 78-82 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bois -- Revêtements protecteurs
Brillance (optique)
Dispersions et suspensions
Enrobage (technologie)
Formulation (Génie chimique)
Haut extrait sec
Neutralisants (chimie)
PolyamidesUn polyamide est un polymère contenant des fonctions amides -C(=O)-NH- résultant d'une réaction de polycondensation entre les fonctions acide carboxylique et amine.
Selon la composition de leur chaîne squelettique, les polyamides sont classés en aliphatiques, semi-aromatiques et aromatiques. Selon le type d'unités répétitives, les polyamides peuvent être des homopolymères ou des copolymères.
Polyuréthanes
Résistance chimique
Résistance thermique
Revêtements -- Propriétés mécaniques
Revêtements bi-composant
Revêtements organiques
Revêtements sans isocyanates
TriéthylamineIndex. décimale : 667.9 Revêtements et enduits Résumé : When developing new coating components, formulators need to balance performance with environmental impact and eliminate or drastically reduce any toxic ingredients. In this article we discuss a new approach to creating polyurethane dispersions for low VOC 2K isocyanate-free crosslinkers wood coatings and protective coating applications. Note de contenu : - Experimental
- Test methods
- The sustainability profile of the novel polyamide polyurethane dispersions
- Renewable content in polyamide-based polyurethanes
- Faster drying leads to lower VOC
- Reduction/elimination of toxic components : triethylamine (TEA)
- Reduction of toxic components : crosslinkers
- Energy savings through high solids content
- Improved abrasion resistance for polyamide-based dispersions
- Performance with reduced application effort
- High performance and sustainable resins
- Table 1 : Basic properties of the novel polyurethane dispersions
- Table 2 : Coating formulation for the new urethane dispersions
- Table 3 : Sustainability of the tested systems
- Table 4 : Physical parameters of the amine neutralisers used in the experimental compositions
- Table 5 : Mechanical properties, thermal resistance, and gloss of polyamide-based polyurethane coatings and benchmarks
- Table 6 : Chemical resistance test summary. From 0 (worst) to 5 (best)
- Table 7 : Gloss retention during weathering testEn ligne : https://drive.google.com/file/d/1gwvZQn3in80xkUcZiPbolKfbuNU-SqPp/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=38912
in EUROPEAN COATINGS JOURNAL (ECJ) > (03/2023) . - p. 78-82[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23900 - Périodique Bibliothèque principale Documentaires Disponible Synergistic effect of Ag and ZnO nanoparticles on polyaniline incorporated epoxy/2pack coatings for splash zone applications / Mohammad Asif Alam in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 3 (05/2019)
PermalinkSyntheses of nano-multilayered TiN/TiSiN and CrN/CrSiN hard coatings / Jiang-Li Cao in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 2 (03/2011)
PermalinkSynthesis, analysis, and application of lactide-based polyester as coating with improved mechanical and rheological behavior / Rushikesh S. Chanpurkar in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 6 (11/2021)
PermalinkSynthesis and characterization of solvent-free hybrid alkyd resin with hyperbranched melamine core / Güngör Gündüz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 4 (07/2018)
PermalinkSynthesis and characterization of UV-curable cellulose acetate butyrate-based oligomers and their cotton fabric coatings / Ozan Gazi Dehmen in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 4 (07/2021)
PermalinkSynthesis and characterization of waterborne and phosphorus-containing flame retardant polyurethane coatings / Funda Celebi in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 944 (09/2003)
PermalinkSynthesis and properties of UV-curable cardanol-based acrylate oligomers with cyclotriphosphazene core / Yan Yuan in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 1 (01/2019)
PermalinkSynthesis, characterization, and properties of isocyanate-free urethane coatings from renewable resources / Arunjunai Raj Mahendran in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 3 (05/2014)
PermalinkSynthesis, characterization, and UV curing of acrylate functional hyperbranched polyester resins / Mats Johansson in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 67, N° 849 (10/1995)
PermalinkSynthesis of acrylate-based UV/thermal dual-cure coatings for antifogging / Bolong Yao in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 1 (01/2018)
PermalinkSynthesis of acrylic-modified water-reducible alkyd resin: improvement of corrosion resistance in painting formulations / Figen Aynali in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 6 (11/2023)
PermalinkSynthesis of bio-based epoxy resin from gallic acid with various epoxy equivalent weights and its effects on coating properties / Deepak Patil in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 2 (03/2017)
PermalinkSynthesis of conducting PANi/SiO2 nanocomposites and their effect on electrical and mechanical properties of antistatic waterborne epoxy coating / Anh Son Nguyen in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 2 (03/2020)
PermalinkSynthesis of epoxy resins using phosphorus-based precursors for flame-retardant coating / Siddhesh Mestry in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 3 (05/2019)
PermalinkSynthesis of fully bio-based branched unsaturated polyester oligomers and UV curing coatings / Caixing Feng in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 5 (09/2023)
Permalink