![](./images/home.jpg)
![](./images/bar_spacer.gif)
Catégories
![]() RhéologieVoir aussi
|
![](./images/expand_all.gif)
![](./images/collapse_all.gif)
Etendre la recherche sur niveau(x) vers le bas
The best for red and yellow / Frank Kleinsteinberg in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4663 (08/2020)
![]()
[article]
Titre : The best for red and yellow Type de document : texte imprimé Auteurs : Frank Kleinsteinberg, Auteur ; Markus Vogel, Auteur Année de publication : 2020 Article en page(s) : p. 15-16 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Additifs
Agents dispersants (chimie)
Agents mouillants
Caractérisation
Jaune
Oxyde de fer
Pigments inorganiques
Potentiel zeta
Rhéologie
Rouge (couleur)
Stabilité au stockage
Taille des particulesIndex. décimale : 667.2 Colorants et pigments Résumé : The author discusses a new additive technology for waterborne iron oxide pigment concentrates.
In decorative coatings, the use of pigment concentrates is a modem and flexible wayto produce coloured paints. Especially in waterborne applications, these concentrates have to be suitable for a broad range of different binder technologies. Because of that, the concentrate formulations are usually free of binders and feature a broad compatibility. Furthermore, the demands in terms of storage stability, colour strength and cost efficiency are very high. These demands are addressed directly to the used additive technology. The additive has to induce outstanding viscosity reduction to achieve the highest pigment loads and the most economic grinding. It has to stabilise the pigments over a long period of time without any change in viscosity and it has to develop maximum colour strength to avoid any waste of expensive pigments.
The most important pigment class in decorative coatings are the iron oxides. Iron oxides are not difficult to wet because of their shape. Iron oxide yellow tends to give dilatant rheology, which can be a disaster when it comes to automatically dosing in a dispensing machine. Iron oxide red, on the other hand, tends to increase the viscosity of pigment concentrates over time.
This paper elucidates to different structures of wetting and dispersing additives, which could be used in waterborne, binder-free pigment concentrates for iron oxides and their performance. It is focused on the stability and the wetting of the pigments, which are reflected by the viscosity reduction, the storage stability of the pigment concentrates and the colouristic properties. For the characterisation of the wetting behaviour and the dispersing efficiency, the zeta potential has been used. In the end, advice and guidelines for formulating iron oxide pigment concentrates will be given.Note de contenu : - Pigment concentrate technology
- Pigment dispersion process
- Electrostatic stabilisation - Zeta potential
- Steric stabilisation
- Discussion of the results
- Particle size andhiding power
- Viscosity and stability
- Zeta potentialEn ligne : https://drive.google.com/file/d/1y0_JPiIZxLA8SxrNLDp3PBsmcTfHJWJH/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34450
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 210, N° 4663 (08/2020) . - p. 15-16[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21904 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : The best of both worlds : New polymer technology combines the most desirable features of acrylic and rubber formulations Type de document : texte imprimé Auteurs : Paul Foreman, Auteur ; Patrick Eaton, Auteur ; Smita Shah, Auteur Année de publication : 2001 Article en page(s) : p. 50-60 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésifs sensibles à la pression
Caoutchouc
ColophaneLa colophane est le résidu solide obtenu après distillation de la térébenthine, oléorésine (appelée aussi gemme), substance récoltée à partir des arbres résineux et en particulier les pins (le genre Pinus) par une opération que l'on appelle le gemmage.
La colophane est solide et cassante à température ambiante. Sa couleur va du jaune très clair au quasi noir en fonction essentiellement de la conduite de la distillation, la couleur ou grade est défini par une échelle de lettre allant de D pour le plus foncé à X pour le plus clair. La colophane ne fond pas mais se ramollit avec la chaleur, son point de ramollissement se situant autour de 70 °C.
Cette résine a les propriétés de coller et d'imperméabiliser. Elle fait partie des liants utilisés dans les antifoulings.
La colophane est composée à 90% d’un mélange d’acides organiques de la famille des diterpènes appelés acides résiniques, qui répondent à la formule brute C20H30O2. Ces acides résiniques sont des isomères. La proportion des différents acides résiniques dans la colophane est variable suivant l’espèce de pin à partir de laquelle la colophane a été obtenue. Certains acides ne sont présents que chez certaines espèces (et leur sont donc caractéristiques).
La colophane (ou « rosine ») a de nombreux usages. On la trouve notamment dans les peintures antifouling où elle se substitue au tributylétain interdit.
C'est un irritant et un allergisant pour la peau et les voies respiratoires, sous forme pure ou par ses produits de dégradation.
Copolymères greffés
Formulation (Génie chimique)
Hydrocarbures
Matériaux hybrides
Polyacryliques
Rhéologie
Tackifiant (adhésifs)Index. décimale : 668.3 Adhésifs et produits semblables Note de contenu : - Testing
- New Approach
- Formulation
- Tackifier & Crosslinker
- Adhesive Performance : Tackifier Response
- Peel Build & Roll Storage
- Applications
- Future DevelopmentsEn ligne : https://drive.google.com/file/d/16VXJYXEtySGFKFh1AdHfPwSMM3V4LcvY/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19947
in ADHESIVES AGE > Vol. 44, N° 9 (09/2001) . - p. 50-60[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001462 - Périodique Bibliothèque principale Documentaires Disponible The characterization of the semi-solid W/O/W emulsions with low concentrations of the primary polymeric emulsifier / D. Vasiljevic in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 27, N° 2 (04/2005)
![]()
[article]
Titre : The characterization of the semi-solid W/O/W emulsions with low concentrations of the primary polymeric emulsifier Type de document : texte imprimé Auteurs : D. Vasiljevic, Auteur ; G. Vuleta, Auteur ; M. Primorac, Auteur Année de publication : 2005 Article en page(s) : p. 81-87 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Caractérisation
Emulsions -- Emploi en cosmétologie
Emulsions -- Stabilité
Emulsions multiples
Rhéologie
Surfactants
Taille des gouttelettesIndex. décimale : 668.5 Parfums et cosmétiques Résumé : Les émulsions H/L/H semi-solides ont été formulées avec les concentrations basses (0.8, 1.6 et 2.4% m/m) de l'émulsifiant lipophile polymèrique PEG-30-dipolyhydroxystearate. Les émulsions simples et multiples ont été préparées avec la teneur élevée en phase intérieure (phi1 = phi2 = 0.8). La teneur en émulsifiant lipophile était la seule différence entre ces formulations. L'aspect macroscopique et microscopique, la taille de globules, la stabilité physique déterminée par le test de centrifugation ainsi que le comportement rhéologique (rhéologie d'écoulement et oscillatoire) ont permis l'évaluation des émulsions multiples. Il est possible de formuler les émulsions H/L/H semi-solides multiples avec les concentrations basses de PEG-30-dipolyhydroxystearate comme émulsifiant primaire. Il a été découvert que l'émulsion H/L/H multiple avec le plus grand pourcentage (2.4% m/m) de l'émulsifiant primaire a le diamètre de globule le plus petit, la plus grande viscosité apparente et le plus grand module élastique ainsi que la plus longue stabilité. DOI : 10.1111/j.1467-2494.2004.00247.x En ligne : https://onlinelibrary.wiley.com/doi/10.1111/j.1467-2494.2004.00247.x Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=4426
in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE > Vol. 27, N° 2 (04/2005) . - p. 81-87[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 004009 - Périodique Bibliothèque principale Documentaires Disponible The comparative study of different mixing methods for microcrystalline cellulose/polyethylene composites / Sevda Boran in INTERNATIONAL POLYMER PROCESSING, Vol. XXXI, N° 1 (03/2016)
![]()
[article]
Titre : The comparative study of different mixing methods for microcrystalline cellulose/polyethylene composites Type de document : texte imprimé Auteurs : Sevda Boran, Auteur ; A. Kiziltas, Auteur ; E. E. Kiziltas, Auteur ; D. J. Gardner, Auteur Année de publication : 2016 Article en page(s) : p. 92-103 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Cellulose La cellulose est un glucide constitué d'une chaîne linéaire de molécules de D-Glucose (entre 200 et 14 000) et principal constituant des végétaux et en particulier de la paroi de leurs cellules.
Composites -- Propriétés mécaniques
Composites -- Propriétés thermiques
Composites thermoplastiques
Extrudeuse bi-vis
Extrudeuse monovis
Matières plastiques -- Extrusion:Polymères -- Extrusion
Mélanges-maîtres (chimie)
Morphologie (matériaux)
Polyéthylène
Réaction de couplage
RhéologieIndex. décimale : 668.9 Polymères Résumé : Polymer composites with polyethylene (PE), microcrystalline cellulose (MCC), and coupling agent (PE-g-MA) were melt blended using a single screw extruder (SSE), twin screw extruder (TSE), and a combination of SSE and extensional flow mixer (EFM) and masterbatch method (MB). The rheological behavior, mechanical, thermal, and morphological properties were investigated to compare material behavior of the MCC-filled PE composites and to evaluate the dispersive mixing efficiency. The composite samples prepared using a single pass method in SSE had relatively larger storage moduli (G?) while those from the TSE and SSE + EFM were smaller. The complex viscosities (?*) of composites with processed using EFM was higher than that of neat PE, indicating better dispersion of the MCC.MCC-filled PE composites processed with EFM showed higher tan delta compared to those of composites. In general, MCC-filled PE composites from the EFM process showed higher viscosity compared to all other composites at all shear rates. The EFM method improved flexural properties more than the other processing methods. The effect of EFM on impact strength of the composites was improved with coupling agent. Addition of MCC, couple agent, and different mixing methods did not significantly affect the thermal properties of the MCC-filled PE composites. Note de contenu : - EXPERIMENTAL : Materials - Preparation of PE composites - Testing of the samples
- RESULTS AND DISCUSSIONS : Rheological properties of the samples - Mechanical properties of the samples - Thermal properties of the samples - Morphological properties of the samplesDOI : 10.3139/217.3156 En ligne : https://drive.google.com/file/d/1v16I-UezHHCsQUqgybBgyNKu1YCYVbyR/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=25774
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXI, N° 1 (03/2016) . - p. 92-103[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17899 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : The cool roof factor : High-shear HEUR thickeners in liquid acrylic elastomeric membranes Type de document : texte imprimé Auteurs : Artur Palasz, Auteur Année de publication : 2024 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Elastomères
Epaississants
Formulation (Génie chimique)
Polyacryliques
Polyuréthane éthoxylé modifié de façon hydrophobe
Protection thermique
Revêtements organiques
Revêtements protecteurs
Rhéologie
Toiture -- RevêtementsIndex. décimale : 667.9 Revêtements et enduits Résumé : Elastomeric acrylic cool-roof coatings make an important contribution to energy-saving construction. However, formulators would benefit from greater insights into how to adjust the appropriate thickeners to make it easier to apply these coatings using different techniques, including spraying. In this article, we look at how to characterise thickeners so as to extract maximum efficiency and establish useful recommendations. Note de contenu : - Optimising formulation
- Thickeners and rheological properties
- Application studies to establish recommendations
- Viscosity
- Dirt pick-up
- Water uptake
- Thickener insights for easier formulation
- Table 1 : Measurement results of rheological properties
- Table 2 : Summary for the use of thickeners for latex N° 1
- Table 3 : Summary for the use of thickeners for latex N° 2En ligne : https://drive.google.com/file/d/1MkGM1f5aKDBybSc82BdXvlIo2qjkQ1BW/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=41104
in EUROPEAN COATINGS JOURNAL (ECJ) > (06/2024)[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24698 - Périodique Bibliothèque principale Documentaires Disponible PermalinkThe "dog tail test" : A quick and dirty measure of yield stress. Application to polyurethane adhesives / Didier Lootens in APPLIED RHEOLOGY, Vol. 19, N° 1 (2009)
PermalinkThe dynamic apparent viscosity of polymer melts during pulsatile extrusion flow with vibration force field / G.-J. He in INTERNATIONAL POLYMER PROCESSING, Vol. XXIII, N° 1 (03/2008)
![]()
PermalinkThe effect of different radiation sources for the UV curing of a screen-printed, water-based polyurethane acrylate binder / Gökhan Akbulut in COLORATION TECHNOLOGY, Vol. 132, N° 4 (08/2016)
![]()
PermalinkThe effect of plasma functionalization on the print performance and time stability of graphite nanoplatelet electrically conducting inks / Andrew Claypole in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 1 (01/2021)
![]()
PermalinkThe effect of rheological properties of experimental moisturizing creams/lotions on their efficacy and perceptual attributes / S. Wang in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 21, N° 3 (06/1999)
![]()
PermalinkThe effect of temperature on the rheological behavior of polyethylene oxide (PEO) solutions / Mohamed Ilies Bahlouli in APPLIED RHEOLOGY, Vol. 23, N° 1 (2013)
PermalinkThe effect of thermal radical initiator derived from O-imino-isourea on thermal curing characteristics and properties of automotive clearcoats / Ji Won Hwang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 12, N° 1 (01/2015)
![]()
PermalinkThe effect of yielding of dense silica slurry on the uniformity of coated layer / Yoshiyuki Komoda in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 1 (01/2022)
![]()
PermalinkThe effects of color concentrates on the rheology of tint bases / Douglas J. Herrick in COATINGS TECH, Vol. 10, N° 9 (09/2013)
![]()
PermalinkThe evolution of surface texture in automotive coatings / Cindy Peters in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 4 (07/2011)
![]()
PermalinkPermalinkThe influence of different shapes and size distributions of coating pigments on packing and dewatering / Jae Y. Shin in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 6 (11/2020)
![]()
PermalinkThe influence of ink viscosity, water and fabric construction on the quality of ink-jet printed polyester / Chenyong Gao in COLORATION TECHNOLOGY, Vol. 136, N° 1 (02/2020)
![]()
PermalinkThe influence of melt-mixing conditions and state of dispersion on crystallisation, rheology and mechanical properties of PCL/sepiolite nanocomposites / M. Eriksson in INTERNATIONAL POLYMER PROCESSING, Vol. XXXV, N° 3 (07/2020)
![]()
PermalinkThe influence of processing variables on performance of O/W emulsion gels based on polymeric emulsifier (Pemulen ®TR-2NF) / S. Simovic in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 21, N° 2 (04/1999)
![]()
PermalinkThe influence of wastes materials on the rheology of rendering mortars / L. A. Pereira de Oliveira in APPLIED RHEOLOGY, Vol. 23, N° 1 (2013)
PermalinkThe non-newtonian fluid mechanics of technical fibre suspensions : compressive flows / Ulf Björkman in APPLIED RHEOLOGY, Vol. 19, N° 4 (2009)
PermalinkPermalinkThe rheological and mechanical properties of PVC-lignin blends / F. Liu in INTERNATIONAL POLYMER PROCESSING, Vol. XXVII, N° 1 (03/2012)
![]()
PermalinkThe rheological properties of grain leather broiler rabbits / Piotr Zapletal in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 102, N° 6 (11-12/2018)
![]()
PermalinkPermalinkPermalinkThe role of nanoclay partitioning and fibril formation on dyeability of blend nanocomposite fibres / Ahmad Bigdeli in COLORATION TECHNOLOGY, Vol. 129, N° 4 (08/2013)
![]()
PermalinkThe thixotropy approach to time dependency in rheology / J. Mewis in LES CAHIERS DE RHEOLOGIE, Vol. XIII, N° 1-2 (10/1994)
PermalinkThe use of apparent yield stress to characterize exfoliation in polymer nanocomposites / Bruno Vergnes in INTERNATIONAL POLYMER PROCESSING, Vol. XXVI, N° 2 (05/2011)
![]()
PermalinkThe use of engineered silica to enhance coatings / Jim Reader in COATINGS TECH, Vol. 17, N° 6 (06/2020)
![]()
PermalinkPermalinkThermal characterization of solvent-free epoxy coatings by rheology and kinetics combined / Weih Q. Lee in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 1 (01/2020)
![]()
PermalinkThermal mold design in consideration of the temperature control fluid flow / Christian Hopmann in INTERNATIONAL POLYMER PROCESSING, Vol. XXVIII, N° 4 (08/2013)
![]()
PermalinkThermal, morphological, rheological and deformation under mechanical loading analyses of recycled polyethylene terephthalates / Kivanc Bakir in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 3 (2022)
![]()
PermalinkThermal, tensile, electrical, dynamic mechanical thermal and rheological properties of polyvinylidene fluoride and fluoroelastomer composites filled with carbon black / M. D. Moezzi in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 1 (03/2019)
![]()
PermalinkThermique outillage, la révolution en marche / Laurent Pivard in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 890 (12/2011)
PermalinkThermoplastic cellulose stearate and cellulose laurate : Melt rheology, processing and application potential / Illia Krasnou in INTERNATIONAL POLYMER PROCESSING, Vol. XXX, N° 2 (05/2015)
![]()
PermalinkThermorheology of polyethylene wax modified sulfur asphalt / M. A. Parvez in INTERNATIONAL POLYMER PROCESSING, Vol. XXX, N° 2 (05/2015)
![]()
PermalinkThermoset coatings engineered by nature / Simen Prang Folkner in EUROPEAN COATINGS JOURNAL (ECJ), (09/2023)
![]()
PermalinkThickening and foaming performance of surfactant formulations / Jochen Kleinen in SOFW JOURNAL, Vol. 150, N° 4 (04/2024)
![]()
PermalinkThickening and free-flowing agents / Kevin Neale in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4567 (12/2011)
![]()
PermalinkThickening by thinning - A novel liquid rheology additive for selvent-based and solvent-free coatings / Janos Hajas in PAINTINDIA, Vol. XLVII, N° 10 (10/1997)
PermalinkThickening paints for any weather / John J. Rabasco in EUROPEAN COATINGS JOURNAL (ECJ), N° 6 (06/2019)
![]()
PermalinkPermalinkThird generation additives / Janos Hajas in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 198, N° 4524 (05/2008)
![]()
Permalink"Thixo-élasticité" des fluides complexes : Modélisation du fluage et de l'hystérésis mécanique / D. Quemada in LES CAHIERS DE RHEOLOGIE, Vol. XIII, N° 1-2 (10/1994)
PermalinkThixotropic mud, compacted cake and swelling shale / J.-D. Sherwood in LES CAHIERS DE RHEOLOGIE, Vol. XIII, N° 1-2 (10/1994)
PermalinkThree-dimensional, non-isothermal simulations of the effect of speed ratio in partially-filled rubber mixing / H. Poudyal in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 2 (05/2019)
![]()
Permalink