Accueil
Catégories
> Ignifugeants
Composé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Ignifugeants
Commentaire :
Composé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Voir aussi |
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Char work / David Vaughan-Lee in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 193, N° 4466 (07/2003)
[article]
Titre : Char work Type de document : texte imprimé Auteurs : David Vaughan-Lee, Auteur ; Nikolai Khalturinski, Auteur Année de publication : 2003 Article en page(s) : p. 10-14 Langues : Anglais (eng) Catégories : Ignifugeants Composé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Incendies -- Prévention
Intumescence (chimie)
Protection passive contre l'incendiela protection passive contre l’incendie dans les bâtiments est essentiellement préventive. Elle représente l’ensemble des mesures constructives permettant à un ouvrage ou une partie d’ouvrage de résister à un incendie pendant un temps prédéterminé fixé par la réglementation de construction en vigueur pour le type de bâtiment concerné. Ces mesures sont destinées à : stopper la progression des fumées, éviter la propagation des flammes, maintenir la stabilité au feu des éléments de structure le plus longtemps possible malgré l’action d’un incendie, contenir les effets thermiques le plus longtemps possible à la zone sinistrée.
La principale spécificité de la protection passive est que dès le début d’un incendie, elle fonctionne sans aucune intervention humaine ni aucun apport extérieur d’énergie.
C’est une protection durable, l’efficacité de la plupart des produits utilisés dans la protection passive n’étant pas limitée dans le temps.
Les principaux moyens de la protection passive sont : Pour les structures, le flocage, l’encoffrement, les peintures ou enduits intumescents… Pour le compartimentage, les parois, les portes coupe-feu, les calfeutrements coupe-feu de pénétration de câbles et de tuyaux, les cheminements techniques protégés...
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.
Revêtements protecteursIndex. décimale : 667.9 Revêtements et enduits Résumé : The journal PPCJ has been following investment into Russian fire-protection systems. The journalist interviews a Professor to find out more.
Fire conjures up many images in our minds, and encompasses many emotions. Fire is arguably the oldest tool that mankind has attempted to control, and yet it is one of the least understood of natural phenomena. Humans are unusual in their lack of fear of fire, and yet in our attempts to bring it into homes and other buildings, we risk severe consequences if we are unable to contain the fire in a 'safe' place. So what can be done to protect structures from fire ?Note de contenu : - Historical tactics
- Development of fire protection
- Chemical flame protection
- Efficient prevention methods
- Fire protection strategies
- Optical processes
- Char development
- Char performance
- Practical demonstrations
- FIGURES : 1. Stages of pyrolysis : A kinetic region ; C diffusion region - 2. Heat consumption in the diffusion area (area C on figure 1) - 3. Metal protection - 4a. Blowtorch on wood. Demonstration on wooden panels coated in intuman paint being subjected to a blowtorch - 4b. The cross section of the char (below) showing the internal structure of the voidsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27838
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 193, N° 4466 (07/2003) . - p. 10-14[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000311 - Périodique Bibliothèque principale Documentaires Disponible Combustion of waterborne intumescent flame-retardant coatings with hybrid industrial filler and biofiller / Khairunisa Md Nasir in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 2 (03/2019)
[article]
Titre : Combustion of waterborne intumescent flame-retardant coatings with hybrid industrial filler and biofiller Type de document : texte imprimé Auteurs : Khairunisa Md Nasir, Auteur ; Nor Hafizah Ramli Sulong, Auteur ; Nor Hafizah Ramli Sulong, Auteur ; Talal Fateh, Auteur ; Mohd Rafie Johan, Auteur ; Amalina Muhammad Afifi, Auteur Année de publication : 2019 Article en page(s) : p. 543-553 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Biomatériaux
Calorimétrie
Charges (matériaux)
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
Revêtements en phase aqueuse -- Additifs
ThermogravimétrieIndex. décimale : 667.9 Revêtements et enduits Résumé : This paper presents the combustibility and thermal stability of an intumescent coating system, which incorporates rice husk ash (RHA) and eggshell as abundant by-products, with two other industrial fillers, namely TiO2 and Al(OH)3. Evaluation was performed using cone calorimeter test at 50 kW m−2 and TGA. Experimental results indicated the influence of fillers on the combustibility properties of coating samples and the decomposition rate of coating materials. The TGA results demonstrated that the addition of RHA and eggshell results in the excess residue weight of more than 35% of the total weight loss. The cone calorimeter test results revealed the coating, which consists of TiO2 and RHA, exerts no effect on fire growth because no ignition is observed. The results proved a remarkable fire resistance of waterborne intumescent coating with the addition of RHA and TiO2 which (1) reduces the total heat release rate (HRR) and heat of combustion; (2) increases the carbon monoxide, carbon dioxide, and smoke yields; and (3) releases the lowest amount of gaseous oxygen released. Consequently, the appropriate combination of hybrid industrial fillers and biofillers has significant influence on the combustibility performance and decomposition of the intumescent coating system. Note de contenu : - MATERIALS AND METHODS : Experimental setup
- RESULTS AND DISCUSSION : Thermal stability of intumescent coatings characterization - Cone calorimetric dataDOI : 10.1007/s11998-018-0136-6 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-018-0136-6 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32424
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 16, N° 2 (03/2019) . - p. 543-553[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20894 - Périodique Bibliothèque principale Documentaires Disponible Comparative study of fire-resistant coatings based on high and low molecular weight tannins / J. Ramirez in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 2 (03/2022)
[article]
Titre : Comparative study of fire-resistant coatings based on high and low molecular weight tannins Type de document : texte imprimé Auteurs : J. Ramirez, Auteur ; M. E. Berrio, Auteur ; A. Diaz-Gomez, Auteur ; L. F. Montoya, Auteur ; A. F. Jaramillo, Auteur ; C. Montalba, Auteur ; K. Fernà ndez, Auteur ; C. Medina, Auteur ; M. F. Meléndrez, Auteur Année de publication : 2022 Article en page(s) : p. 453–465 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
CatéchineLa catéchine est une molécule de la famille des flavonoïdes de la sous-classe des flavanols. Elle est aussi connue sous le nom de catéchol, avec le risque de confusion avec le pyrocatéchol parfois dénommé lui aussi catéchol. L’usage dans la communauté scientifique a fini par imposer le terme de catéchine, dérivé du terme anglais catechin.
Initialement découverte dans les fruits de l'acacia à cachou (Acacia catechu) duquel elle dérive son nom, la catéchine et ses nombreux isomères sont de puissants antioxydants qui aident à prévenir les maladies inflammatoires et coronariennes.
Le terme de catéchine est aussi parfois utilisé pour désigner la classe des flavanols (flavan-3-ols, flavan-3,4-ols et leurs esters galliques). Pour éviter la confusion entre la classe et le composé, ce dernier est désigné dans ce contexte par (+/-)-catéchine.
Enrobage (technologie)
Extraction (chimie)
Formulation (Génie chimique)
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Poids moléculaires
Revêtements -- Propriétés filmogènes
Revêtements -- Propriétés mécaniques
Revêtements en phase aqueuse -- Additifs
Revêtements protecteurs
Tanins
TaxifolineLa taxifoline ou dihydroquercétine est un composé organique de la famille des flavanonols, un sous-groupe de flavonoïdes. Elle est naturellement présent dans l'açaï (Euterpe oleracea), le mélèze de Sibérie (Larix sibirica) et la silymarine extraite des graines de chardon-Marie. Elle est aussi présente en faible quantité dans l'oignon rouge.
C'est le dérivé 2,3-dihydrogéné de la quercétine.Index. décimale : 667.9 Revêtements et enduits Résumé : In order to provide adequate fire resistance to construction materials, such as steel and wood, the use of high and low molecular weight tannins (TMw-H and TMw-L), extracted from the bark of Pinus radiata, as carbonaceous agents, was studied. The extracts were fully characterized by GPC, HPLC, and UV to determine the total amount of phenols, percentage of the monomers, and total yield. The molecular weights of both extracts varied between 2986 and 5573 Da, and they were mainly composed of catechin and taxifolin. Eco-friendly water-based formulations were obtained, without producing volatile organic compounds (VOCs), by varying the extract content between 15.5 and 37.8% w/w. The coatings, varying in thickness and substrates, were evaluated for their film-forming properties, covering power, mechanical properties, such as adhesion, embossing, abrasion, and flexibility, as well as their resistance to fire. The results indicated that good mechanical properties were obtained when using coatings containing TMw-L compared with those obtained when using TMw-H. The carbonization index (28%) and the mass loss percentage (9.35%) of the coatings containing TMw-L compared well to commercial coatings, indicating that they have excellent fire-retardant properties. However, the behavior of the TMw-H containing coatings was rather intumescent. Note de contenu : - MATERIALS AND METHODS : Extraction and characterization of the TMw-H and TMw-L - Formulation of coatings and surface preparation of steel and wood substrates - Evaluation of the mechanical properties of the coatings - Fire-resistant behavior
- RESULTS AND DISCUSSION : Characterization of the tannin extracts obtained from the bark of Pinus radiata - Formulation of coatings - Evaluation of the coating properties - Evaluation of the fire-resistant properties of the coatings
- Table 1 : Variation of the percentage of the compositions in the formulations for TMw-L and TMw-H
- Table 2 : Characterization of the tannin extracts obtained from the bark of Pinus radiata
- Table 3 : PVC, CPVC, and λ values for the formulations
- Table 4 : Evaluation of film properties of formulations and commercial coatings
- Table 5 : Evaluation of the mechanical properties of the coatings
- Table 6 : Mass loss and carbonization index of the coatingsDOI : https://doi.org/10.1007/s11998-021-00532-7 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-021-00532-7.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37277
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 19, N° 2 (03/2022) . - p. 453–465[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23408 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Completely protected : Foam gasket application in the electronics industry Type de document : texte imprimé Auteurs : Florian Kampf, Auteur Année de publication : 2016 Article en page(s) : p. 25-27 Langues : Multilingue (mul) Catégories : Adhésion
Equipements électroniques ou électriques (EEE)
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Joints d'étanchéité
Mousses plastiques
Polyuréthanes
Transformateurs électriquesIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : Foam gasket application in the electronics industry - Nowadays, the life veins of highly automated industrial production come together in the switch cabinets used in the electrical distribution and control and safety technology of the production systems. The sensitive electronics involved are given the best possible protection against faults and mechanical damage by the control cabinet body. But the control cabinet needs to be sealed off too. Note de contenu : - Shortened assembly and tack-free times
- Advantages of short assembly times
- Good surfaces adhesion and elastic recovery
- Optimised sealing parameters
- Flame protection in the event of a fireEn ligne : https://drive.google.com/file/d/1yG4wnhXgd-jRHLR_yRBdtrQHq2ElUFq7/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=25755
in ADHESION - ADHESIVES + SEALANTS > N° 1/2016 (2016) . - p. 25-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18004 - Périodique Bibliothèque principale Documentaires Disponible Des compounds ignifugés respectant l'environnement / Frank Agunloye in CAOUTCHOUCS & PLASTIQUES, N° 820 (03/2004)
[article]
Titre : Des compounds ignifugés respectant l'environnement Type de document : texte imprimé Auteurs : Frank Agunloye, Auteur Année de publication : 2004 Article en page(s) : p. 25-27 Langues : Français (fre) Catégories : Halogènes -- Suppression ou remplacement
Hydroxyde d'aluminium
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
PolypropylèneIndex. décimale : 668.4 Plastiques, vinyles Résumé : La chimie par intumescence est le sujet principal de cet article et est à la base des compounds ignifugés respectant l'environnement, que propose Polymer Tailoring. Note de contenu : - Retardateurs de flamme halogénés
- Retardateurs de flamme à base de phosphore rouge
- Métaux hydratés
- Chimie par intumescence
- Soufflage
- Injection
- RotomoulagePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23736
in CAOUTCHOUCS & PLASTIQUES > N° 820 (03/2004) . - p. 25-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000505 - Périodique Bibliothèque principale Documentaires Disponible Curing formulation headaches / Stephan Sprenger in ADHESIVE TECHNOLOGY, Vol. 16, N° 2 (06/1999)
PermalinkDemands and innovations / Jürgen Troitzsch in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 11 (11/2012)
PermalinkDesigning a novel fiber for fire protection applications / Clemens Bisjak in CHEMICAL FIBERS INTERNATIONAL, (09/2015)
PermalinkDevelopment of flame-retardant waterborne polyurethane dispersions (WPUDs) from sulfonated phosphorus-based reactive water-dispersible agents / Dwij Dave in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 4 (07/2021)
PermalinkDevelopment of nanocomposites with flame retardant effect for leather and fabric / Anna Bacardit in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 103, N° 4 (07-08/2019)
PermalinkDéveloppement de tissus non-tissés pour applications militaires / Stephen Szczesuil in L'INDUSTRIE TEXTILE, N° 1396 (03-04/2009)
PermalinkPermalinkEco-friendly fire prevention / Rudolf Pfaendner in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 8 (08/2014)
PermalinkEcologically flame retardant / Benjamin Brehmer in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 8 (08/2013)
PermalinkEffect of aluminum hydroxide on the fireproofing properties of ammonium polyphosphate–pentaerythritol-based intumescent coating / Yu M. Evtushenko in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 5 (09/2019)
PermalinkEffect of brominated epoxy resins on the thermal stability and flame retardancy of long-glass-fiber reinforced polyamide 6 / D.-F. Zhou in INTERNATIONAL POLYMER PROCESSING, Vol. XXXI, N° 4 (08/2016)
PermalinkEffect of expansion temperature on the properties of expanded graphite and modified linear low density polyethylene / Xiuyan Pang in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 3 (2022)
PermalinkEffect of microencapsulated ammonium polyphosphate on the durability and fire resistance of waterborne intumescent fire-retardant coatings / Zhitian Liu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 1 (01/2019)
PermalinkEffect of three structurally different epoxy resins on fire resistance, optical transparency, and physicomechanical properties of intumescent fire-retardant transparent coatings / Raj Shree in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 2 (03/2021)
PermalinkEffect of titania, barite, and kaolinite fillers on char layer formation in water-based intumescent fire-retardant coatings / Iben Hansen-Bruhn in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 4 (07/2022)
Permalink