Accueil
Catégories
> Ignifugeants
Composé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Ignifugeants
Commentaire :
Composé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Voir aussi |
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
The changing face of intumescent coatings / Andrew Taylor in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4596 (05/2014)
[article]
Titre : The changing face of intumescent coatings Type de document : texte imprimé Auteurs : Andrew Taylor, Auteur Année de publication : 2014 Article en page(s) : p. 37-38 Langues : Anglais (eng) Catégories : Couches épaisses
Couches minces
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
Revêtements:PeintureIndex. décimale : 667.9 Revêtements et enduits Résumé : Intumescent coatings form the backbone of fire protection methods for structural steel projects. , Sherwin-William's EMEA region, examines how the business works with its customers to ensure the highest levels of fire protection and what the future holds under new European legislation. En ligne : https://drive.google.com/file/d/1UogYG1NcIXEyPu9pGxKwmy1r88Wj9WxY/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21512
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 204, N° 4596 (05/2014) . - p. 37-38[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16262 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : The chrome-free tanning system Type de document : texte imprimé Année de publication : 2014 Article en page(s) : p. 36-37 Langues : Anglais (eng) Catégories : Avions -- Habitacles
Avions -- Matériaux
Cuir
EasyWhite (tannage)
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.Index. décimale : 675 Technologie du cuir et de la fourrure Résumé : According to the New York Times, two million passengers in the US board more than 30 000 flights every day. Based on 2008 data, 93 000 worldwide flights took off from approximately 9000 airports. And, at all times in a 24 hours period, there were between eight and 13 000 aeroplanes in the air.
These snapshot figures indicate the importance of leather upholstery to the aviation industry. It can be assumed that most of the flights today are on short-haul domestic or regional routes, when the aircraft usually has to be made ready for the next flight in a short space of time. Turn around times need to be fast, and leather-upholstered seats help.
Airlines increasingly appreciate the attributes of leather : its easy-clean properties, abrasion resistance, longevity and the fact that consumers see leather as a luxury upholstery material, creating an attractive ambience for travel. Achieving all the required properties and meeting the physical and chemical standards demanded by the aviation industry presents a challenge to the tanner supplying the leather, especially when compounded by the increasing demand for lighter-weight leathers and the all-important fire-retardant finish.Note de contenu : - Inherently flame resistant
- Avoid complication associated with fire-retardant finishes
- Not only fire retardant, but also more economicalEn ligne : https://drive.google.com/file/d/1-b7UmE4wZmihpd-QdBmog3jaDTIO76tT/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20495
in LEATHER INTERNATIONAL > Vol. 216, N° 4837 (01-02/2014) . - p. 36-37[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 15964 - Périodique Bibliothèque principale Documentaires Disponible 15987 - Périodique Bibliothèque principale Documentaires Disponible The depth and expanse of graphene to cause breathrough properties in coatings / Rajesh M. Shah in PAINTINDIA, Vol. LXX, N° 10 (10/2020)
[article]
Titre : The depth and expanse of graphene to cause breathrough properties in coatings Type de document : texte imprimé Auteurs : Rajesh M. Shah, Auteur Année de publication : 2020 Article en page(s) : p. 55-78 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Anticorrosifs
Anticorrosion
Composites
GraphèneLe graphène est un cristal bidimensionnel (monoplan) de carbone dont l'empilement constitue le graphite. Il a été isolé en 2004 par Andre Geim, du département de physique de l'université de Manchester, qui a reçu pour cette découverte le prix Nobel de physique en 2010 avec Konstantin Novoselov. Il peut être produit de deux manières : par extraction mécanique du graphite (graphène exfolié) dont la technique a été mise au point en 2004, ou par chauffage d'un cristal de carbure de silicium, qui permet la libération des atomes de silicium (graphène epitaxié). Record en conduction thermique jusqu'à 5300 W.m-1.K-1. C'est aussi un matériaux conducteur.
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Matériaux -- Propriétés fonctionnelles
Revêtements antisalissures
Revêtements protecteursIndex. décimale : 667.9 Revêtements et enduits Résumé : Graphene has attracted significant attention because of its unique combination of extraordinary electronic, optical and mechanical properties. It was first isolated in 2004 using simple mechanical exfoliation of graphite. Graphene sheets are two-dimensional, one-atom-thick layers of sp2-bonded carbon atoms connected in a hexagonal, honey-comb-like pattern. Graphene has found applications in almost all the areas such as advanced batteries and transistors, solar cells, displays, sensors, and composites. In coatings, graphene by itself as a coating material or as an additive for improving the performance of various coating technologies is an emerging area. Graphene based coating have applications in corrosion resistant coatings, flame retardant coatings, wear/scratch resistant coatings, anti-fouling coatings, pollutant adsorption coatings, anti-septic coatings etc. ej. Besides, graphene-based corrosion protection coatings, the super- hydrophobicity of graphene has also been exploited. Also, there are many possible applications for conductive graphene coatings. Note de contenu : - GRAPHENE - CHEMICAL STRUCTURE
- TYPES OF GRAPHENE : Graphene oxide - Reduced graphene oxide (rGO) - Graphene nanoplatelets (GNPs) - Graphene oxide quantum dots - Graphene nanoribbons - Chemical modifications of graphene (graphene masterbatches)
- PROPERTIES OF GRAPHENE : Electronic properties - Mechanical properties - Thermal properties - Flexibility/elasticity - Optical properties
- APPLICATIONS OF GRAPHENE IN COATING INDUSTRY : Graphene based protective coatings / Corrosion-inhibiting coating - Graphene-based fire retardant coating - Graphene based anti-fouling coatings
- MISCELLANEOUS APPLICATIONS : Graphene sensors - Lithium reduced graphene oxide batteries - Structural composites - Graphene based composite materials - Functional inks
- Fig. 1 : Graphene hybrid 2d structure
- Fig. 2 : Graphene - Hexagonal pattern
- Fig. 3 : Graphene - Fullerone, nanotube and graphite
- Fig. 3 : Graphene molecular structure anatomic structure - 3D illustration
- Fig. 4 : Structure of pG, GO & rGO
- Fig. 5 : Graphene - Properties
- Fig. 6 : Graphene-based hygiene coatingEn ligne : https://drive.google.com/file/d/1mQU0UjbQ4kYTlhNxUJLUAS7hWx-ttb9J/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34668
in PAINTINDIA > Vol. LXX, N° 10 (10/2020) . - p. 55-78[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22360 - Périodique Bibliothèque principale Documentaires Disponible The effect of ultraviolet ageing on the flame retardancy, thermal stability and mechanical properties of LGFPP/IFR / W.-D. He in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 2 (05/2019)
[article]
Titre : The effect of ultraviolet ageing on the flame retardancy, thermal stability and mechanical properties of LGFPP/IFR Type de document : texte imprimé Auteurs : W.-D. He, Auteur ; Y. Zhou, Auteur ; Y.-F. Wu, Auteur ; J.-B. Guo, Auteur ; X.-L. Chen, Auteur ; X. Zhang, Auteur Année de publication : 2019 Article en page(s) : p. 262-269 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Composites à fibres de verre
Composites à fibres de verre -- Effets du rayonnement ultraviolet
Composites à fibres de verre -- Propriétés mécaniques
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
Matières plastiques -- Détérioration
Polypropylène
Stabilité thermiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : In this work, long glass fibre reinforced polypropylene/intumescent flame retardants (LGFPP/IFR) composites are exposed to ultraviolet (UV) radiation with wavelength of 340 nm for 0–800 h. The effects of UV ageing on the flame retardancy, thermal stability and mechanical properties of LGFPP/IFR composites are investigated and discussed by limiting oxygen index (LOI), UL–94 test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), scanning electronic microscopy (SEM), mechanical properties and energy dispersive X-ray analysis (EDAX). A slight variation in LOI values and UL-94 levels are observed, and CCT results display a lower heat release rate for all aged samples. The TGA result also shows that aged samples have a higher degradation temperature with the prolongation of the aging time. EDAX showed higher content of the O, P and N elements on the surface of samples after 600 h ageing, which means partly gathering of IFR particles. The tensile, bending and impact strengths decrease after ageing, and the fracture morphology shows that interface debonding occurs. Note de contenu : - EXPERIMENTAL : Materials - Preparation of samples - Measurements characterization
- RESULTS AND DISCUSSION : UL-94 and LOI - Dynamic combustion - Thermal stability - EDAX results - Mechanical properties and fracture morphologyDOI : 10.3139/217.3707 En ligne : https://drive.google.com/file/d/1rlrNh-brKe-1J_BJc7BhLFdHeM-0Qt5n/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32401
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXIV, N° 2 (05/2019) . - p. 262-269[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20883 - Périodique Bibliothèque principale Documentaires Disponible The enhanced surface properties of geopolymer inorganic coatings by adding with MgO / Xueting Liu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 3 (05/2022)
[article]
Titre : The enhanced surface properties of geopolymer inorganic coatings by adding with MgO Type de document : texte imprimé Auteurs : Xueting Liu, Auteur ; Ying Fan, Auteur ; Yuan Li, Auteur ; Wenkui Liu, Auteur ; Jingjing Wu, Auteur ; Changming Liu, Auteur ; Bin Yang, Auteur ; Zhicheng Pang, Auteur Année de publication : 2022 Article en page(s) : p. 947-957 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Géopolymères Les géopolymères sont la réciproque des polymères organiques. À la place de dérivés du pétrole et de la chaîne carbonée, on utilise de la matière minérale composée de silice et d’alumine.
Les géopolymères sont basés sur des alumino-silicates désignés sous le terme poly(sialate), qui est une abréviation de poly(silico-oxo-aluminate) ou (-Si-O-Al-O-)n (soit n le degré de polymérisation). La structure chimique de la Figure 1 montre un géopolymère poly(sialate-siloxo) résultant d'une géosynthèse de poly(silisique) acide (SiO2)n et de potassium alumino-silicate, en milieu alcalin (KOH, NaOH). Dans cette structure, le groupement sialate (Si-O-Al-O-) est un agent de réticulation.
On pense que le mécanisme de la synthèse géochimique se fait par l'intermédiaire d'oligomères (dimère, trimère) qui constituent les véritables groupements structuraux unitaires formant une structure macromoléculaire tridimensionnelle.
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Oxyde de magnésiumL'oxyde de magnésium, communément appelé magnésie, a pour formule MgO et se présente sous la forme de poudre blanche très fortement basique absorbant l'eau et le dioxyde de carbone présents dans l'atmosphère.
STRUCTURE : L'oxyde de magnésium est un cristal ionique. L'oxyde de magnésium a une structure comparable à celle du chlorure de sodium7. Cela se traduit par
Un réseau d'anion oxygène formant une structure de type cubique à faces centrées
Un réseau de cation magnésium occupant l'ensemble des sites octaèdriques.
L'oxyde de magnésium est un matériau modèle des cristaux ioniques car la faible électronégativité du magnésium, et la forte électronégativité de l’oxygène font que la structure de l’oxyde de magnésium peut s’expliquer quasi uniquement grâce à des interactions entre des particules ponctuelles chargées 10.
La surface de l'oxyde de magnésium la plus stable dans le vide est obtenue en réalisant une coupe selon le plan cristallographique (100). Les particules d'oxyde de magnésium produites par combustion du magnésium métallique présentent d'ailleurs une forme cubique révélatrice de la présence de ces plans. Néanmoins, en présence d'eau, la surface de l'oxyde de magnésium est couverte d'ions hydroxyles qui stabilisent les plans (111)
PRODUCTION : La majeure partie de l'oxyde de magnésium est actuellement obtenue soit à partir de carbonate de magnésium MgCO3 qui constitue certains minéraux tels que la magnésite, soit à partir de chlorure de magnésium que l'on extrait de l'eau de mer ou de saumures souterraines.
Résistance à l'abrasion
Revêtements inorganiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : This paper mainly studies an inorganic coating based on geopolymer technology. Metakaolin is used as raw material, and water glass solution is used as alkali activator to prepare geopolymer. The surface properties including crack resistance and scrub resistance of the obtained coating were improved by adding certain amount of resin and fillers such as silicone acrylic emulsion, mica powder, and MgO powder. The results show that when the contents of silicone acrylic emulsion, mica powder, and MgO powder are 19.00%, 3.20%, and 2.16–2.86%, respectively, the surface properties of the coating are optimal. Especially noteworthy is that adding MgO can enhance the surface properties of the prepared coating, the mechanism of which can be rationalized by the inhibited shrinkage of the coating via microcrack deformation, the enhanced compactness and the filled pores of the coating upon adding MgO. In addition, the flame retardancy of the samples was explored through thermal analysis and cone calorimeter. Note de contenu : - EXPERIMENTAL : Materials - Experimental methods - Experimental proportion - Characterization and testing methods
- RESULTS AND DISCUSSION : Coating properties - Structure characterizations
- Table 1 : Chemical composition of kaolin and metakaolin
- Table 2 : Mixed proportions of samples
- Table 3 : The crack resistance of the coatings without adding any filler
- Table 4 : The crack resistance of the coatings with fillers
- Table 5 : The influence of WG/MK on the water resistance of the coating
- Table 6 : The appearance performance of the coating under different curing daysTable 7 Heat release parameters for sampleDOI : https://doi.org/10.1007/s11998-021-00572-z En ligne : https://link.springer.com/content/pdf/10.1007/s11998-021-00572-z.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=38088
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 19, N° 3 (05/2022) . - p. 947-957[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23605 - Périodique Bibliothèque principale Documentaires Disponible The "green" challenge / Philippe Dubois in JEC COMPOSITES MAGAZINE, N° 45 (11-12/2008)
PermalinkThe protective effects and aging process of the topcoat of intumescent fire-retardant coatings applied to steel structures / Ji Wang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 1 (01/2016)
PermalinkThe synthesis and application of a high performance amino resin nanocomposite as leather flame retardant / Ling Huijiao in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 96, N° 1 (01-02/2012)
PermalinkThermal conductivity of oriental beech impregnated with fire retardant / Seref Kurt in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 6, N° 4 (12/2009)
PermalinkThermal degradation kinetics and flame retardancy of hide treated with montmorillonite-amno resin nano-composite / Yang Liutao in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 94, N° 1 (01-02/2010)
PermalinkTrying not to go up in flames / BLC Leather Technology Centre in WORLD LEATHER, Vol. 7, N° 1 (02/1994)
PermalinkL'utilisation des retardateurs de flamme dans le domaine textile / Claire Negrell-Guirao in L'ACTUALITE CHIMIQUE, N° 360-361 (02-03/2012)
PermalinkUV-curable flame-retardant coatings based on phosphorous and silicon containing oligomers / Durva Naik in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 3 (05/2019)
PermalinkValorisation des matières plastiques bromées issues des D3E / Layla Gripon in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 972 (01-02/2021)
PermalinkPermalinkVersatile flame retardant for olefinic and styrenic polymer / Subramaniam Narayan in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 202, N° 4572 (05/2012)
PermalinkWaterborne etherified MF and PVAc hybrid resin containing nanoclay as intumescent flame-retardant plywood coatings / Chih-Shen Chuang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 3 (05/2023)
PermalinkWhat's on the surface counts : mineral products for surface coatings / Seleen Creedon in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4555 (12/2010)
Permalink