Accueil
Catégories
> Monomères
MonomèresVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : Surface modification of carbon fibers Type de document : texte imprimé Année de publication : 2015 Article en page(s) : p. 49 Langues : Anglais (eng) Catégories : Epoxydes
Fibres de carbone
Monomères
Solutions (chimie)
Traîtements de surfaceIndex. décimale : 677.4 Textiles artificiels En ligne : https://drive.google.com/file/d/1JlQLXkw_EtHESqZe9qLBSjJsz7IHjtkj/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23679
in CHEMICAL FIBERS INTERNATIONAL > Vol. 65, N° 1 (03/2015) . - p. 49[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17120 - Périodique Bibliothèque principale Documentaires Disponible Sustainable polyesters for powder coatings / Alessandro Minesso in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4602 (11/2014)
[article]
Titre : Sustainable polyesters for powder coatings Type de document : texte imprimé Auteurs : Alessandro Minesso, Auteur Année de publication : 2014 Article en page(s) : p. 32-33 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Biomatériaux
Développement durable
Formulation (Génie chimique)
Monomères
Polyesters
Polymères -- Recyclage
Produits et matériaux recyclés
Revêtements poudre:Peinture poudreIndex. décimale : 667.9 Revêtements et enduits Résumé : A new method for the synthesis of sustainable and cost-efficient polyester resins for powder coating has been developed by combining the chemical recycling of polymers recovered from post-consumer waste streams with the use of bio-based monomers as building blocks for the polymerisation. Some of these monomers are very specific and brought to the development of materials with unique properties, which cannot be obtained from traditional petrochemicals. Therefore, the casting produced using this new approach presents applicative properties similar to and, in some cases, superior properties, compared with commercial coatings obtained from non-renewable resources. This aspect combined with the sustainable character of the new technology gives important advantages in comparison with conventional resins and opens new possibilities In market segments where the current powder coating has limited applications due to some intrinsic limitations. En ligne : https://drive.google.com/file/d/1YS0pLBwGjx8Eyq8BegOFmiGaVBKHplu3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=22420
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 204, N° 4602 (11/2014) . - p. 32-33[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16675 - Périodique Bibliothèque principale Documentaires Disponible Synthèse de colloïdes modèles par polymérisation en émulsion de styrène et d'acrylate de N-butyle. Leur utilisation dans des études de rhéologie et de formation de film / Jean-Luc Guillaume / 1985
Titre : Synthèse de colloïdes modèles par polymérisation en émulsion de styrène et d'acrylate de N-butyle. Leur utilisation dans des études de rhéologie et de formation de film Type de document : texte imprimé Auteurs : Jean-Luc Guillaume, Auteur ; Christian Pichot, Directeur de thèse ; Université Claude Bernard (Lyon), Organisme de soutenance Année de publication : 1985 Importance : 231 p. Présentation : ill. Format : 30 cm Note générale : Bibliogr. Langues : Français (fre) Catégories : Amorceurs (chimie)
Colloides -- Synthèse
Copolymère styrène acrylate de butyle
Epaississants
Formation de film
Latex
Monomères
Polymérisation en émulsion
Rhéologie
Thèses et écrits académiquesIndex. décimale : 541.34 Solutions Résumé : Dans le présent travail, la synthèse de colloides modèles par copolymérisation en émulsion du styrène et de l'acrylace de n-butyle, en l'absence d'émulsifiant, a été réalisée en utilisant un procédé "réacteur fermé".
La nature et la densité des charges (COO- SO-3 + ou SO-4 à la surface des particules, ainsi que le diamètre de ces dernières sont ajustés au moyen de la concentration et de la nature de l'amorceur de polymérisation et du comonomère ionique introduit pour remplacer l'émulsifiant.
L'effet de l'introduction de monomères plus hydrophiles que le styrène (acrylate de n-butyle, comonomère ionique) sur le mécanisme de polymérisation (nucléation des particules, stabilité du latex) a été étudié et un modèle théorique a été développé permettant de prédire l'évolution de la densité superficielle de charges des particules en fonction de l'avancement de la polymérisation.
Ces colloïdes modèles ont ensuite été utilisés pour étudier les propriétés de latex épaissis au moyen d'une nouvelle gamme de modificateur de rhéologie, les épaississants associatifs, dont le mécanisme d'épaississement est comparé à celui de la méthyle cellulose. En présence d'épaississants associatifs, il apparait d'une part des flocs et d'autre part une augmentation de la viscosité de la phase aqueuse est mise en évidence.
Finalement, une étude de faisabilité concernant l'application des techniques microondes pour suivre la formation d'un film de latex a été réalisée montrant que cette technique apporte de façon reproductible des informations beaucoup plus riches que la méthode classique de mesure de perte de poids de solvant d'un film en cours de séchage.Note de contenu : - 1. Approches cinétique du mécanisme de la copolymérisation styrène-acrylate de n-butyle
- 2. Emulsifier free emulsion copolymerization of styrene and butyl acrylate. I : Kinetic studies in the absence of emulsifier - Copolymérisation en émulsion de styrène et d'acrylate de n-butyle en l'absence de d'émulsifiant I : Kinetic studies
- 3. Emulsifier and free emulsion copolymerization of styrene and butyl acrylate - II : Kinetic studies in the presence of ionogenic comonomers - Copolymérisation en émulsion de styrène et d'acrylate de n-butyl en l'absence d'émulsifiant - II : Etudes cinétiques en présence de comonomères fonctionnels ionisés
- 4. Emulsifier free emulsion copolymerization of styrene and butyl acrylate - III : Kinetic studies in the presence of a surface active comonomer ; the acrylamidoundecanoïc acid - Copolymérisation en émulsion de styrène et d'acrylate de n-butyl en l'absence d'émulsifiant - III : Etudes cinétique en présence d'un comonomer tensioactif, l'acide acrylamidoundecanoïque
- 5. Cinétique de copolymérisation en émulsion du styrène et de l'acrylate de n-butyle. Effet de l'introduction de comonomères fonctionnels
- 6. Rheological studies of latex thickened with the "associative" thickeners. Etude rhéologique de latex épaissis au moyen d'épaississants associatifs
- 7. Etudes préliminaires de l'utilisation de la spectroscopie microonde lors du processus de filmification d'un latexThèse : Thèse. Spécialité chimie. Université Claude Bernard (Lyon) : 1985 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31579 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20571 TH/1985/GUI Thèse, mémoire, etc... Bibliothèque principale Documentaires Disponible Synthesis and characterisation of silicone polyacrylate latex emulsified by green surfactants / Yilu Gong in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 209, N° 4649 (03/2019)
[article]
Titre : Synthesis and characterisation of silicone polyacrylate latex emulsified by green surfactants Type de document : texte imprimé Auteurs : Yilu Gong, Auteur ; Tantan Shao, Auteur ; Xin Zhang, Auteur ; Dawei Chen, Auteur ; Lijun Chen, Auteur Année de publication : 2019 Article en page(s) : p. 33-36 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Angle de contact
Biosurfactants
Caractérisation
Copolymère silicone acrylate
Copolymères -- Synthèse
Emulsifiants
Humidité -- Absorption:Eau -- Absorption
Latex
Monomères
Revêtements en phase aqueuseIndex. décimale : 667.9 Revêtements et enduits Résumé : The modified latex was successfully prepared by semi-continuous seeded emulsion polymerisation with a green mixed emulsifier of polyether nonions with double bonds (AE-100) and alkyl alcohol polyether sodium sulphate anionic emulsifier (ES-430S). The mixed monomers of MMA, BA and vinyl triethoxysilane (VETS) were initiated with potassium persulphate (KPS). The structure and properties of the resultant latex were characterised by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) differential scanning calorimetry (DSC) and contact angle (CA). The conditions for preparing the latex were instigated in detail. Results indicate that the optimal conditions of preparing the latex are as follows: the amount of mixed emulsifiers is 6.0% ; the optimum mass ratio of AE-100 to ES-4305 is 1:1.5 ; the amount of initiator is 0.7% ; the mass rate of main monomers of MMA: BA =1:1 and amount of VIES is 6.0%. In addition, the resultant latex shows good thermal stability and hydrophobicity. Note de contenu : - EXPERIMENT : Materials - Preparation of modified latex - Characterisation
- RESULTS AND DISCUSSION : FTIR and DSC of films - Influence of mass ratio of monomer on properties of latex - Effect of amount of emlusifier and mass ratio on properties of latex - Water absorption and contact angle
- Fig. 1 : Synthetic pathway of preparing modified latex
- Fig. 2 : FTIR of latex film
- Fig. 3 : DSC of film
- Fig. 4 : Effect of different mass ratios of emulsifier on conversion percentage (A) and coagulation percentage (B)
- Fig. 5 : Influence of amount of VTES on contact angle (B) and water absorption (C)
- Fig. 6 : Contact angles of film la 77.6°, conventional latex film ; b 89.6°, modified latex film)
- Fig. 7 : TGA of latex film (a : conventional latex film ; b : modified latex film)
- Table 1 : Recipe of preparing modified latex
- Table 2 : The effect of the amount of emulsifiers on average particle size
- Table 3 : Influence of mass radio of monomer on properties of lates
- Table 4 : Influence of amount of emulsifier on properties of latexEn ligne : https://drive.google.com/file/d/1YrbMdfoE1Li2zajO9lRzKpc2h_ehnrTQ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32122
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 209, N° 4649 (03/2019) . - p. 33-36[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 20765 - Périodique Bibliothèque principale Documentaires Disponible 20958 - Périodique Bibliothèque principale Documentaires Disponible Synthesis of acrylic-modified water-reducible alkyd resin: improvement of corrosion resistance in painting formulations / Figen Aynali in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 6 (11/2023)
[article]
Titre : Synthesis of acrylic-modified water-reducible alkyd resin: improvement of corrosion resistance in painting formulations Type de document : texte imprimé Auteurs : Figen Aynali, Auteur ; Gürcan Sakar, Auteur ; Elif Suna Kocyigit, Auteur ; Alper Kades, Auteur Année de publication : 2023 Article en page(s) : p. 2007-2017 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acrylique
Adhésion
Anticorrosifs
Anticorrosion
Caractérisation
Matériaux -- Modifications chimiques
Monomères
Organosilanes
Polyalkydes
Polymères -- Synthèse
Revêtements -- Effets de l'humidité:Peinture -- Effet de l'humidité
Revêtements -- Propriétés mécaniques:Peinture -- Propriétés mécaniques
Revêtements organiques
Revêtements:PeintureIndex. décimale : 667.9 Revêtements et enduits Résumé : In this study, we investigated the effect of organosilane monomer on the adhesion strength and corrosion protection of the water-reducible alkyd coatings. For this purpose, firstly, alkyd resin was synthesized and modified with acrylic monomers by changing organosilane monomer content in the range of 4–16 wt% in all acrylic monomer compositions. Then, the carboxyl groups on the hybrid resins were neutralized with a base and the coating recipes were formulated using these water-reducible resins. The chemical structure and composition of the synthesized polymers were confirmed using 1H-NMR and FTIR spectroscopies. Mechanical properties of coatings applied on the cold-rolled steel surfaces were investigated via crosshatch adhesion, pendulum hardness, gloss, impact, and conical mandrel bend tester. According to the results, it can be said that water-reducible acrylic-modified alkyd coatings offer a good balance of hardness and flexibility. Then, the line was scratched parallel to the coating system and the surface coating properties of the coated panels, such as the adhesion strength after being exposed to humidity and corrosion resistance, were comparatively investigated. The best results for corrosion resistance and adhesion strength were obtained with the coating which was formulated with the resin having organosilane monomer of 8 wt% in all acrylic monomer mixtures. As the organosilane monomer amount increased to 16 wt%, the coatings’ corrosion resistance and adhesion strength decreased. As a result, it was observed that organosilane modification is significantly effective in improving the adhesion strength and corrosion resistance of water-reducible alkyd coatings. However, increasing the amount of silane monomer may reverse the positive results obtained. This study also reveals significant results about the correlation between the adhesion strength and corrosion resistance of coatings by presenting visual results. Note de contenu : - EXPERIMENTAL SECTION : Materials - Synthesis of water-reducible acrylic-modified alkyd resin - Characterization
- RESULTS AND DISCUSSION : Resin - Coating
- Table 1 : The recipe for acrylic modification of alkyd resin
- Table 2 : The properties of synthesized acrylic-modified alkyd resins, VTMS % (wt.) in acrylic monomer composition
- Table 3 : Mechanical properties of coatings applied on the CRS surfaces
- Table 4 : Adhesion results of all panels after exposure to humidityDOI : https://doi.org/10.1007/s11998-023-00795-2 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-023-00795-2.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40177
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 20, N° 6 (11/2023) . - p. 2007-2017[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24337 - Périodique Bibliothèque principale Documentaires Disponible Synthesis of styrene and n-butyl acrylate latex polymers modified by functional monomers and their waterborne paint applications / Gökhan Akbulut in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 5 (09/2022)
PermalinkSynthesis of UV-curable polyesters with lateral double bonds by ring-opening polymerization and their properties / Yumei Zhou in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 6 (11/2021)
PermalinkTechnological scenario for green and sustainable architectural coatings / Vaibhav J. Dave in PAINTINDIA, Vol. LXIV, N° 8 (08/2014)
PermalinkThe correlation between the comonomer ratios of vinyl polymer tannages and their application properties / Jianzhong Ma in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 86, N° 2 (03-04/2002)
PermalinkPermalinkThe right dose for the right cure / Xavier Drujon in EUROPEAN COATINGS JOURNAL (ECJ), N° 5 (05/2020)
PermalinkTuning of final performances of soybean oil-based polymer nanocomposites : effect of styryl/oil functionalized intercalant of montmorillonite reinforcer in INTERNATIONAL POLYMER PROCESSING, Vol. XXX, N° 2 (05/2015)
PermalinkUV curable acrylate monomers : Structure - activity relationship and selection criterion / R. D. Kulkarni in PAINTINDIA, Vol. LX, N° 6 (06/2010)
PermalinkUV curable monomers and oligomers in PSA applications / Craig Glotfelter in ADHESIVES AGE, Vol. 40, N° 3 (03/1997)
PermalinkUV curable PSAs augment existing adhesive technologies / Tom Kauffman in ADHESIVES AGE, Vol. 41, N° 7 (07/1998)
PermalinkUV-curing of coatings with unsaturated polyesters with different structures / Vera Kornilova in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 209, N° 4650 (04/2019)
PermalinkVAE-dispersions for a variety of coatings applications / Kevin Merlo in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4618 (03/2016)
PermalinkVeoVa 10 vinyl ester based binders for interior silk and exterior architectural paints / Claude Nootens in PAINTINDIA, Vol. LXIV, N° 3 (03/2014)
PermalinkViscosity reduction via monomer selection in solvent-borne high-solids styrene/acrylic coating resins / Charles A. Zezza in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 68, N° 856 (05/1996)
PermalinkWaterborne acrylic PSA technology with high-temperature performance / Jong Guo in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 25, N° 9 (09/2018)
Permalink