Accueil
Détail de l'indexation
Ouvrages de la bibliothèque en indexation 667.9
Ajouter le résultat dans votre panier Affiner la recherche
Additives to control the rheology of paints and coatings / Leo J. Procopio in COATINGS TECH, Vol. 18, N° 10 (10/2021)
[article]
Titre : Additives to control the rheology of paints and coatings Type de document : texte imprimé Auteurs : Leo J. Procopio, Auteur Année de publication : 2021 Article en page(s) : p. 26-32 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Epaississants
Latex
Revêtements -- Additifs:Peinture -- Additifs
RhéologieIndex. décimale : 667.9 Revêtements et enduits Résumé : Formulating paints and coatings to provide the right balance of properties is a complex undertaking. Getting the rheology profile correct is just one important task on the formulator’s to-do list, but it is crucial to the ultimate success of the coating.
The rheology profile influences properties of the coating throughout its lifetime, from manufacture, storage, mixing, and application, to the resulting film properties. To control and optimize the rheology of liquid coatings, the formulator typically relies on additives, often referred to as rheology modifiers, thickeners, and thixotropes.
This article reviews some of the basics of rheology and rheological additives and includes comments from a roundtable discussion with industry experts on existing challenges and new developments.Note de contenu : - Basics of rheology
- Shear rate and physical processes
- Targeting a viscosity profile when formulating
- Additives for rheology control
- Fig. 1 : Definition of some key rheological parameters for a liquid under shear
- Fig. 2 : Types of rheology profile displayed by liquids
- Fig. 3 : Examples of shear rates for various processes used in the paint and coatings industry, and for some common methods of measuring viscosity
- Fig. 4 : Thickening mechanism for latex coatings with non-associative rheology modifiers
- Fig. 5 : Thickening mechanism for latex coatings with associative rheology modifiersEn ligne : https://drive.google.com/file/d/19pKoYryDqqsbD1TW2qiGqt1pea_QhzVx/view?usp=share [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36457
in COATINGS TECH > Vol. 18, N° 10 (10/2021) . - p. 26-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23017 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Additives - Wetting agents & sufactants Type de document : texte imprimé Auteurs : M. Veeramani, Auteur Année de publication : 2015 Article en page(s) : p. 104-106 Langues : Anglais (eng) Catégories : Agents mouillants
Revêtements en phase aqueuse -- Additifs:Peinture en phase aqueuse -- Additifs
SurfactantsIndex. décimale : 667.9 Revêtements et enduits Résumé : We propose these informations in this column devoted exclusively to waterbased coatings. Note de contenu : - A few cautionary measures to be taken while using surfactants
- What do surfactants contribute to the systemEn ligne : https://drive.google.com/file/d/1PWCdfg6wDwnb_Ks5R4E1ykP1sc2mc7e7/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24159
in PAINTINDIA > Vol. LXV, N° 4 (04/2015) . - p. 104-106[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17241 - Périodique Bibliothèque principale Documentaires Disponible Additives will take you to quality leadership / N. R. Kondekar in PAINTINDIA, N° annuel 2000 (2000)
[article]
Titre : Additives will take you to quality leadership Type de document : texte imprimé Auteurs : N. R. Kondekar, Auteur Année de publication : 2000 Article en page(s) : p. 83-88 Langues : Anglais (eng) Tags : 'Matériau revêtement' Peinture Formulation Adjuvant Index. décimale : 667.9 Revêtements et enduits Résumé : Today, making a conventional paint is not at all difficult. One can make good quality paint with little efforts. However, to enter into the quality circle or quality leadership, one needs to know the best use of proper additives. Both quality and quantity of additive will effect the final performance of paint. However, for doing so, one has to consider the chemistry of raw materials used in the paint industry. Note de contenu : - Why to use additives ?
- Additives useful during paint processing
- Additives used for taking care of application oriented problems
Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12658
in PAINTINDIA > N° annuel 2000 (2000) . - p. 83-88[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001247 - Périodique Bibliothèque principale Documentaires Disponible Addressing single-layer protective coatings / Goeffrey R. Webster in EUROPEAN COATINGS JOURNAL (ECJ), N° 12 (12/2018)
[article]
Titre : Addressing single-layer protective coatings : A new resin for improved direct-to-metal coatings has been developed Type de document : texte imprimé Auteurs : Goeffrey R. Webster, Auteur ; Gianluigi Cassin, Auteur ; Jens Duereth, Auteur ; Curt Cleven, Auteur ; Todd Wallis, Auteur Année de publication : 2018 Article en page(s) : p. 42-47 Langues : Anglais (eng) Catégories : Anticorrosifs
Anticorrosion
Application directe sur le métal
Essais de brouillard salin
Fourier, Spectroscopie infrarouge à transformée de
Homopolymères
Métaux -- Revêtements protecteurs
Photo-oxydation
Polyacryliques
Polyesters
Résistance à l'hydrolyse
Résistance aux conditions climatiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : A great many DTM coatings have difficulty providing weatherability or corrosion performance or both. Direct-to-metal coatings formulated with resins made using 2,2,4,4-tetramethyl-1,3-cyclobutanediol not only are rugged and deliver bestin-class weathering and corrosion resistance but can also be a potential replacement for 2-coat systems. Note de contenu : - Identifying a persistent problem
- A new solution
- Hydrolysis resistance
- Moisture barrier
- Corrosion resistance
- Weathering resistance
- Fig. 1 : 2,2,4,4-tetramethyl-1,4-cyclobutanediol monomer (TMCD)
- Fig. 2 : Comparison of hydrolysis of homopolymers
- Fig. 3 : Coatings - 36 day 50% H2SO4 exposure : PE coating with no TMCO ; centre : the same resin with partial replacement of the glycol by TMCO and 100% of the glycol replaced by TMCO
- Fig. 4 : Water vapour transmission rates (ASTM E-96) of a coating prepared with "Tetrashield PC4000" to a standard protective coating of acrylic polyol crosslinked with "Desmodur 3390"
- Fig. 5 : 500 hours ASTM B117 corrosion over shot blasted steel. 2,2,4,4-tetramethyl 1,4-cyclobutanediol 2K coating and commercial acrylic. For testing, the panels were removed from the salt fog chamber, allowed to dry for a minimum of 12 hrs., then immersedin hot tap water for 30 minutes followed by scraping with a steel spatula to remove all loose paint
- Fig. 6 : Xenon ASTM 2527 accelerated weathering of "Tetrashield" resins compared to conventional polyesters and commercial acrylics
- Fig. 7 : FTIR spectra of unweathered and weathered coatings showing the NH OH and CH stretch region
- Fig. 8 : Plot of POV vs. time in xenon for conventional polyesters, "Tetrashield" resins and conventional acrylics in refinish clearcoat formulations
- Fig. 9 : Rate of photo-oxidation by IR spectroscopy. Lower rate indicates better weathering
- Table 1 : Homopolymers prepared for hydrolysis testingEn ligne : https://drive.google.com/file/d/1ECUdCGhb8mphL0JaxP4UVC3GBRPnj39n/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31508
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 12 (12/2018) . - p. 42-47[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20474 - Périodique Bibliothèque principale Documentaires Disponible Adhérence des revêtements à base de résine vinylique et d'oxyde de fer lamellaire / Carlos A. Giudice in EUROPEAN COATINGS JOURNAL (ECJ), N° 5/94 (05/1994)
[article]
Titre : Adhérence des revêtements à base de résine vinylique et d'oxyde de fer lamellaire Type de document : texte imprimé Auteurs : Carlos A. Giudice, Auteur Année de publication : 1994 Article en page(s) : p. 292-299 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : Une des plus importantes propriétés d'un film de peinture de protection est son adhérence à l'état humide, laquelle implique un jeu mécanique complexe d'interactions dans la zone d'interface. Une défaillance du film telle que le cloquage est un problème fréquent dû à une perte d'adhérence résultant elle-même de la pénétration de l'eau. Dans le présent article on examine l'adhérence d'un film de peinture vinylique sur acier galvanisé en fonction de son exposition au brouillard salin. On considère plusieurs paramètres liés à la formulation et à la fabrication. Les résultats indiquent que l'oxyde de fer lamellaire micacé, s'il est correctement dispersé, améliore la cohésion dans le film de peinture tout en favorisant l'adhérence à la surface. Les autres pigments (sulfate de baryum naturel, talc) ont une moins bonne résistance à la rupture Note de contenu : - Composition et fabrication de la peinture
- Mesure de l'adhérence
Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11231
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5/94 (05/1994) . - p. 292-299[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 002493 - Périodique Bibliothèque principale Documentaires Disponible Adherence strength and smoothness of cathodically deposited paints on aluminum / Fritz Beck in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 67, N° 845 (06/1995)
PermalinkAdhesion and weathering performance of waterborne coatings applied to different temperate and tropical wood species / Jan van den Bulcke in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 3 (07/2006)
PermalinkAdhesion aspects of polymeric coatings / Jamil A. Baghdachi / Blue Bell [Etats-Unis] : Federation of societies for coatings technology (1996)
PermalinkAdhesion aspects of polymeric coatings / Kashmiri Lal Mittal / New York [Etats-Unis] : Plenum Press (1983pl)
PermalinkAdhesion : a key property of paints and coatings / Durgesh Kumar Soni in PAINTINDIA, Vol. LXVI, N° 6 (06/2016)
PermalinkAdhesion not required / David Pellicer in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 10, N° 1 (2017)
PermalinkAdhesion of coating on plastic substrates / Gaurav Pophale in PAINTINDIA, Vol. LX, N° 5 (05/2010)
PermalinkAdhesion of waterborne paints to wood / Stig L. Bardage in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 70, N° 878 (03/1998)
PermalinkPermalinkAdhesion promoters / Vladimir V. Verkholantsev in EUROPEAN COATINGS JOURNAL (ECJ), N° 11/99 (11/1999)
PermalinkPermalinkPermalinkAdhesion promoters and primers for polyolefinic plastics / T. Halberstadt in PAINTINDIA, Vol. LXII, N° 1 (01/2012)
PermalinkPermalinkAdhesion promoters for paints and coatings with a special reference to flexible substrates / M. N. Sathyanarayana in PAINTINDIA, Vol. XLVI, N° 1 (01/1996)
Permalink