Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le haut et vers le bas
Blasting and painting bogies in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 11, N° 2 (2018)
[article]
Titre : Blasting and painting bogies Type de document : texte imprimé Année de publication : 2018 Article en page(s) : p. 10-11 Langues : Anglais (eng) Catégories : Ateliers de peinture industrielle
Chaleur -- Récupération
Industrie ferroviaire
Revêtements:Peinture
Séchage
Traitement de surface par impactIndex. décimale : 667.9 Revêtements et enduits Résumé : The Luxembourg National Railway Company has set up a specially designed plant for blasting and painting heavy components of rail vehicles. The paint shop is highly energy-efficient and produces waste air with a very Iow concentration of pollutants. Note de contenu : - Pre-treatment in the blasting chamber
- Combined painting and drying booth
- Approximately 50 percent of heat recovered
- Fig. The new plant consists of a blasting chamber and a combined painting and drying booth with a paint mixing room to the side. The telescopic opening in the roof of the booths enables the parts to be lowered into position using an indoor crane.Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30993
in INTERNATIONAL SURFACE TECHNOLOGY (IST) > Vol. 11, N° 2 (2018) . - p. 10-11[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20084 - Périodique Bibliothèque principale Documentaires Disponible Blends of cardanol-based epoxidized novolac resin and CTBN for application in surface coating : a study on thermal, mechanical, chemical, and morphological characteristics / Ranjana Yadav in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 5 (09/2010)
[article]
Titre : Blends of cardanol-based epoxidized novolac resin and CTBN for application in surface coating : a study on thermal, mechanical, chemical, and morphological characteristics Type de document : texte imprimé Auteurs : Ranjana Yadav, Auteur ; Deepak Srivastava, Auteur Année de publication : 2010 Article en page(s) : p. 557-568 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Revêtements Tags : Cardanol 'Résine novolac' 'Carboxyl-terminated butadiene acrylonitrile' (CTBN) 'Analyse calorimétrique différentielle' (DSC) thermogravimétrique' (TGA) Index. décimale : 667.9 Revêtements et enduits Résumé : Blend samples of cardanol-based epoxidized novolac resin and different weight percentages of carboxyl-terminated butadiene acrylonitrile (CTBN) were developed and cured with stoichiometric amounts of aliphatic amine. The formation of various products during the curing of blend samples has been studied by Fourier-transform infrared spectroscopy. The dynamic differential scanning calorimeter scans showed that the pure epoxies and their blend samples with CTBN cured in the temperature range of 100–150°C. The blend sample containing 15 wt% CTBN showed the least cure time (at 120°C) among all other blend samples. Upon evaluation, it was found that blend samples exhibit better properties compared to pure epoxy resin in terms of increase in impact strength and elongation-at-break of the casting and gloss, scratch hardness, adhesion, and flexibility of the film. The improvement in these properties indicates that the rubber modified resin would be more durable than the epoxy based on cardanol. Chemical and morphological properties of the formulated resins were also determined. The thermal stability of the blend samples containing 15 wt% CTBN in epoxy resin was the highest among all other prepared systems. The blend morphology, studied by scanning electron microscope, showed the presence of precipitated discrete rubber particles, which dispersed throughout the epoxy matrix—i.e., they revealed the presence of two-phase morphological features. DOI : 10.1007/s11998-009-9235-8 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-009-9235-8.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=9911
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 7, N° 5 (09/2010) . - p. 557-568[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012448 - Périodique Bibliothèque principale Documentaires Disponible Blends of CNSL phenol-formaldehyde-ketonic resin : a cost-effective endeavour to enhance performance of conventional CNSL coatings / Vilas D. Athawale in PAINTINDIA, Vol. LVIII, N° 7 (07/2008)
[article]
Titre : Blends of CNSL phenol-formaldehyde-ketonic resin : a cost-effective endeavour to enhance performance of conventional CNSL coatings Type de document : texte imprimé Auteurs : Vilas D. Athawale, Auteur ; Narendra J. Shetty, Auteur Année de publication : 2008 Article en page(s) : p. 100 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Baume de cajou
Cyclohexanone
Formaldéhyde
Polycyclohexanones
RevêtementsIndex. décimale : 667.9 Revêtements et enduits Résumé : Cashew nut shell liquid (CNSL) and Phenol formaldehyde were synthesised in the laboratory and subsequently blended with ketonic (Cyclohexanone formaldehyde) resin. The physico-mechanical and performance properties such as drying time, hardness, adhesion, flexibility, gloss, skinning tendency, corrosion, impact resistance and chemical resistance were examined at various compositions of the modified CNSL resin and ketonic resin blend. The 50:50 percent (w/w) of CNSL-phenol-formaldehyde- Ketonic (Cyclohexanone formaldehyde) resin blend exhibited enhanced coating properties as compared to any other proportions of the blend. Note de contenu : - Morphological study of blends
- Driers
- Tests carried out for the study of coating propertiesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12105
in PAINTINDIA > Vol. LVIII, N° 7 (07/2008) . - p. 100[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010766 - Périodique Bibliothèque principale Documentaires Disponible Bond strength of hybrid sol-gel coatings with different additives / Mousa May in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 10, N° 3 (05/2013)
[article]
Titre : Bond strength of hybrid sol-gel coatings with different additives Type de document : texte imprimé Auteurs : Mousa May, Auteur ; Heming Wang, Auteur ; Robert Akid, Auteur Année de publication : 2013 Article en page(s) : p. 407-413 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésion
Alumine
Dioxyde de titane
Microscopie
Microscopie électronique à balayage
Nanoparticules
Polyaniline
Revêtements
Sol-gel, ProcédéIndex. décimale : 667.9 Revêtements et enduits Résumé : The hybrid sol–gel coating on Al 2024-T3 was modified by adding polyaniline, TiO2, or γ-Al2O3 nanoparticles in the formulation separately. The coating was then used as an adhesive to bond Al 2024-T3 alloys, forming a single lap joint. The bond strength of the sol–gel coating was investigated using a universal tensile test machine. The lap shear strength of the original sol–gel coating was about 1.38 MPa and it was increased up to 2.26 MPa after the modification by adding 0.05 wt% PANI microparticles in the sol–gel coating. The small increase in strength was attributed to an improvement in its adhesive flexibility because of incorporation of the long-chain organic polymer in its structure. Furthermore, the addition of different amounts of TiO2 nanoparticles in the unmodified sol–gel coating also led to an increase in shear strength compared to the undoped sol–gel coating. Typically, a sol–gel coating containing 2.0 wt% of TiO2 recorded the highest adhesive strength of about 4.0 MPa. A similar increase in strength was observed when doping γ-Al2O3 nanoparticles into the original hybrid sol–gel coating. Adding 0.5 wt% of γ-Al2O3 in the sol–gel coating increased the adhesive bonding strength up to 4.48 MPa. The fracture surface of the specimen was separately observed by SEM and Optical Microscopy in order to examine potential evidences of mechanism and nature of failure. The reason why the adhesive strength increased after the modification of the sol–gel coating is discussed in this article. Note de contenu : - EXPERIMENTAL WORK : Materials - Preparation of adhesion samples - Adhesion strength measurements
- RESULTS AND DISCUSSION : Bond strength of hybrid sol-gel coatings
- EFFECTS OF DIFFERENT ADDITIVES ON THE SOL-GEL ADHESIVE STRENGTH : Doping 0.05% PANI - Effects of the addition of TiO2 nanoparticules - Effects of the addition of γ-Al2O3 nanoparticles - FTIR characterization of the fracture surfaceDOI : 10.1007/s11998-012-9450-6 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-012-9450-6.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18739
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 10, N° 3 (05/2013) . - p. 407-413[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 15149 - Périodique Bibliothèque principale Documentaires Disponible 15593 - Périodique Bibliothèque principale Documentaires Disponible Boosting performance of preferred technology / Erin Vogel in EUROPEAN COATINGS JOURNAL (ECJ), N° 6 (06/2016)
[article]
Titre : Boosting performance of preferred technology : Near-zero VOC water-borne alkyd dispersions with solvent-borne alkyd properties Type de document : texte imprimé Auteurs : Erin Vogel, Auteur ; Marty Beebe, Auteur ; Bob Bills, Auteur ; Christina Ellison, Auteur ; Sue Machtelski, Auteur ; Jamie Sullivan, Auteur ; Jay Romick, Auteur ; Vennesa Williams, Auteur Année de publication : 2016 Article en page(s) : p. 32-41 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Anticorrosion
Dispersions et suspensions
Etudes comparatives
Formulation (Génie chimique)
Polyalkydes
Revêtement en phase solvant
Revêtements en phase aqueuse
Revêtements:Peinture
VernisIndex. décimale : 667.9 Revêtements et enduits Résumé : Solventborne coatings have always been considered superior in terms of performance to waterborne coatings. A novel technology seeks to turn this around. This study presents waterborne formulations using short and medium oil alkyds that rival solventborne coatings in terms of gloss, adhesion and corrosion resistance. Note de contenu : - State of the art achieves low VOC through chemical or physical modification
- Waterborne alkyd coatings comparable to solventborne using mechanical dispersion
- Experiments with short and medium oil alkyd resin dispersions demonstrate usefulness
- New formulations to improve properties
- Short oil alkyd dispersion is a top performer for metal protection
- Flexibility and corrosion resistance can be tailored to application
- Performance gap between WB and SB alkyd technologies closes
- TABLES : 1. Dispersion characteristics of a short and medium oil alkyd dispersed into water via novel mechanical dispersion process - 2. Clear coating formulations for the developmental short oil alkyd at 560 g/L and<5g/L VOC - 3. Gloss, adhesion, hardness, and MEK resistance data for clear SB and WB SO alkyd coatings (1 mil DFT on CRS) - 4. Path to MO alkyd probe using DoE methodology - 5. Pigmented formulation used for SO and MO alkyd dispersion coatings - 6. Paint performance of SO and MO WB alkyd dispersions compared to commercial WB alkyd paints - 7. Paint performance of MO and SO WB alkyd dispersions compared to commercial SB alkyd paints - 8. Paint performance of coatings formulated with SO and MO alkyd dispersions - 9. Paint performance of coatings formulated with blends of SO and MO alkyd dispersionsEn ligne : https://drive.google.com/file/d/1IGtamGyki6eWFg7xk9rB4QqZ31FcIcJN/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26461
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 6 (06/2016) . - p. 32-41[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18147 - Périodique Bibliothèque principale Documentaires Disponible Breakthrough innovation for in-can preservation / Thomas Köhler in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4563 (08/2011)
PermalinkButyraldehyde resin : Lowering VOC and improving film properties / Ralph Stange in EUROPEAN COATINGS JOURNAL (ECJ), N° 4/97 (04/1997)
PermalinkCalcined kaolin - A master tool for TiO2 reduction / Sagar Bangar in PAINTINDIA, Vol. LXIX, N° 7 (07/2019)
PermalinkCall to action : carbon capture coatings in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 209, N° 4655 (10/2019)
PermalinkCan in process quality control prevent premature coating failure ? / William D. Corbett in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 30, N° 1 (01/2013)
PermalinkCan pre-project coating testing lead to post-application performance ? / Valerie Sherbondy in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 32, N° 4 (04/2015)
PermalinkCapillary condensation-induced anomalous water sorption in urethane-based coatings exposed to high humidity conditions / A. Allahdini in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 2 (03/2016)
PermalinkCapture of overspray powder paint in a wet booth system / Sheila F. Kia in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 69, N° 875 (12/1997)
PermalinkCaractérisation de films colorés de Fe-O-N élaborés par pulvérisation magnétron réactive / C. Petitjean in MATERIAUX & TECHNIQUES, Vol. 94, N° 1 (2006)
PermalinkCaractérisation des matériaux bi-couches semi-transparents par radiométrie photométrique : application aux revêtements de surface et en hématologie / Robert Dartois / 1986
PermalinkPermalinkCarbon nanotube base conductive coatings / Sanket Bilakhia in PAINTINDIA, Vol. LXIII, N° 10 (10/2013)
PermalinkCarbon nanotubes ? Endless opportunities / Katja Feick in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 199, N° 4535 (04/2009)
PermalinkCarbon processing with high process validation / Karl Müll in CHEMICAL FIBERS INTERNATIONAL, Vol. 62, N° 2 (05/2012)
PermalinkCarbon processing with high process validation / Karl Müll in CHEMICAL FIBERS INTERNATIONAL, (10/2012)
Permalink