Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le haut et vers le bas
Acid-resistant organic coatings for the chemical industry : a review / Victor Buhl Møller in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 2 (03/2017)
[article]
Titre : Acid-resistant organic coatings for the chemical industry : a review Type de document : texte imprimé Auteurs : Victor Buhl Møller, Auteur ; Kim Dam-Johansen, Auteur ; Sarah Maria Frankaer, Auteur ; Søren Kiil, Auteur Année de publication : 2017 Article en page(s) : p. 279-306 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Industries chimiques
Résistance chimique
Revêtements -- Analyse:Peinture -- Analyse
Revêtements -- Détérioration:Peinture -- Détérioration
Revêtements organiques
Revêtements protecteursIndex. décimale : 667.9 Revêtements et enduits Résumé : Industries that work with acidic chemicals in their processes need to make choices on how to properly contain the substances and avoid rapid corrosion of equipment. Certain organic coatings and linings can be used in such environments, either to protect vulnerable construction materials, or, in combination with fiber reinforcement, to replace them. However, degradation mechanisms of organic coatings in acid service are not thoroughly understood and relevant quantitative investigations are scarce. This review describes the uses and limitations of acid-resistant coatings in the chemical industry, with a comparison to alternative resistant materials based on metals or ceramics. In addition, coating degradation phenomena, caused by acid exposure, are mapped to the extent possible, and analysis methods for detecting coating degradation type and severity are listed and discussed. It is concluded that more knowledge on chemical and physical degradation mechanisms is required, and that improvements in resistance to elevated temperatures and abrasion would decrease the risk of use and increase the potential application areas of organic coatings exposed to acidic environments in the chemical industry. Note de contenu : - ORGANIC COATINGS IN ACIDIC ENVIRONMENTS : History - Process limitations of acid-resistant coatings
- ACID-RESISTANT MATERIALS : Inorganic materials - Organic coatings
- COATINGS DEGRADATION IN ACID SERVICE : Physical degradation through diffusion - Chemical degradation - Acid degradation of commercial thermosets
- EXPERIMENTAL TESTING AND ANALYSIS : Diffusion analysis - Analysis of chemical change - Visual alterationsDOI : 10.1007/s11998-016-9905-2 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-016-9905-2.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28143
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 14, N° 2 (03/2017) . - p. 279-306[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18781 - Périodique Bibliothèque principale Documentaires Disponible Adaptive speckle imaging interferometry (ASH) : New technology for advanced drying analysis of coatings / A. Brun in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 89, B3 (09/2006)
[article]
Titre : Adaptive speckle imaging interferometry (ASH) : New technology for advanced drying analysis of coatings Type de document : texte imprimé Auteurs : A. Brun, Auteur ; P. Snabre, Auteur ; L. Brunel, Auteur Année de publication : 2006 Article en page(s) : p. 251-254 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse optique
Formation de film
Revêtement -- Séchage
Revêtements -- Analyse
Revêtements en phase aqueuse -- Séchage
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : In this work a new optical technology, ASII, is presented, for the study of film formation from all kinds of dispersed systems, such as latexes, emulsions or solvent-borne suspensions. Various film-forming products have been investigated, including water-borne coatings, on various types of substrates. A wide range of information can be extracted such as objective drying times (dust-free, dry-hard times, etc) or mechanism taking place, thereby offering new possibilities to analyse film formation from complex colloidal systems. Note de contenu : - Measurement principle
- Adaptive data processing : Analysis depth
- Examples of drying kineticsDOI : 10.1007/BF02699668 En ligne : https://link.springer.com/content/pdf/10.1007/BF02699668.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5285
in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS > Vol. 89, B3 (09/2006) . - p. 251-254[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 005574 - Périodique Bibliothèque principale Documentaires Disponible Analyse et identification de peintures aérosols / Stéphane Milet in L'ACTUALITE CHIMIQUE, N° 378-379 (10-11/2013)
[article]
Titre : Analyse et identification de peintures aérosols Type de document : texte imprimé Auteurs : Stéphane Milet, Auteur ; Magali Bertrand, Auteur ; Richard Gosse, Auteur ; Antoine Devémy, Auteur ; Bruno Espanet, Auteur Année de publication : 2013 Article en page(s) : p. 47-51 Note générale : Bibliogr. Langues : Français (fre) Catégories : Bases de données
Criminalistique
Peintures aérosols
Revêtements -- Analyse:Peinture -- Analyse
Spectrométrie infrarouge
Spectroscopie de fluorescence
Spectroscopie des rayons XIndex. décimale : 667.6 Peintures Résumé : Des dégradations volontaires sont fréquemment commises au moyen de peintures aérosols (tags, profanations de tombes, revendications de groupuscules...). Les preuves échantillonnées sur les sites ainsi marqués sont traitées au Département Véhicules de l'IRCGN qui a développé un ensemble de méthodes fines appliquées aux peintures aérosols à des fins de comparaison et d'identification. Une même peinture aérosol peut provenir de fabricants ou de distributeurs sous différentes références. La principale méthode employée est la spectrométrie infrarouge à transformée de Fourier par transmission (IRTF). L'analyse de différentes peintures aérosols fournies par les fabricants et leurs distributeurs a permis de créer une base de données, désormais mise en œuvre chaque fois que l'analyse d'un cas réel est requise pour les besoins d'une enquête. Une seconde méthode d'analyse, la microfluorescence X, complète les résultats de l'analyse par IRTF. Dans certaines circonstances, d'autres méthodes telles la spectrométrie Raman et le couplage de la pyrolyse/chromatographie en phase gazeuse/spectrométrie de masse sont parfois mises en œuvre. Note de contenu : - PRINCIPALES CARACTERISTIQUES DES PEINTURES : Cas particulier des peintures aérosols
- CREATION D'UNE BASE DE DONNEES DE PEINTURES AEROSOLS : Préparation et analyse de l'échantillon
- IDENTIFICATION D'UNE PEINTURE AEROSOL SUR DES ECHANTILLONS REELS
- METHODES D'ANALYSE COMPLEMENTAIRES
- EXEMPLE D'APPLICATIONEn ligne : https://new.societechimiquedefrance.fr/numero/analyse-et-identification-de-peint [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=19787
in L'ACTUALITE CHIMIQUE > N° 378-379 (10-11/2013) . - p. 47-51[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15726 - Périodique Bibliothèque principale Documentaires Disponible Analysing architectural coating film-formation / Nicolas Tissier in EUROPEAN COATINGS JOURNAL (ECJ), N° 3 (03/2015)
[article]
Titre : Analysing architectural coating film-formation : Monitoring methods for film formation for the development of architectural coatings Type de document : texte imprimé Auteurs : Nicolas Tissier, Auteur Année de publication : 2015 Article en page(s) : p. 74-79 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Applications extérieures
Formation de film
Revêtement -- Séchage:Peinture -- Séchage
Revêtements -- Analyse:Peinture -- Analyse
Revêtements en bâtiment:Peinture en bâtimentIndex. décimale : 667.9 Revêtements et enduits Résumé : The façade paint industry is characterised by concentrating all efforts to strongly support one unique combination : protection of the substrate and the achievement of the expected aesthetic effect in line with the latest trends. In this article, the aim is to highlight some of the analytical tools focusing on film formation which have been used in the development of recent architectural coatings. Note de contenu : - From systematic paint degradation to detailed monitoring of film-drying
- Cunfocal microscopy ton control distribution of components in paint film
- Enabling better film-drying understandingEn ligne : https://drive.google.com/file/d/1sHZRhU0WdYlEcDEq0ThF275tLwuudaq7/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23471
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 3 (03/2015) . - p. 74-79[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17052 - Périodique Bibliothèque principale Documentaires Disponible Analysing complex multi-layer coatings in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 8, N° 2 (2015)
[article]
Titre : Analysing complex multi-layer coatings Type de document : texte imprimé Année de publication : 2015 Article en page(s) : p. 60-61 Langues : Anglais (eng) Catégories : Contrôle non destructif
Couches minces multicouches
Epaisseur -- Mesure
Revêtements -- Analyse
Revêtements multicouches
Spectroscopie de fluorescence
Spectroscopie des rayons XIndex. décimale : 667.9 Revêtements et enduits Résumé : Determining the thickness of coatings using X-Ray fluorescence - Each coating on plug connectors must have a verifiable minimum thickness; otherwise, it can lead to component failure. X-ray fluorescence (XRF) is used to monitor even complex multilayer coatings quickly and non-destructively using a single device. Note de contenu : - Analysing multi-layer coatings
- Highly accurate semiconductor detectors
- Targeted scanning of critical areas
- Measuring equipment capability
- Tighter tolerances and reduced material costsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24927
in INTERNATIONAL SURFACE TECHNOLOGY (IST) > Vol. 8, N° 2 (2015) . - p. 60-61[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17360 - Périodique Bibliothèque principale Documentaires Disponible Analysis of weathering effects in automotive coatings using thermoluminescence / Simone Krüger in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 5, N° 1 (03/2008)
PermalinkApplication of fringe field capacitance sensor for the study of water permeation in organic coatings / K. A. Thomas in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 5 (09/2016)
PermalinkApplication of impedance imaging to evaluation of organic coating degradation at a local scale / M. Szocinski in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 10, N° 1 (01/2013)
PermalinkAssessment of various analytical techniques on naturally weathered paints as a predictor of long-term gloss retention for waterborne acrylic architectural paints / Matthew S. Gebhard in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 1 (01/2006)
PermalinkBio-based antimicrobial food packaging coatings / Brittney M. Mclnnis in COATINGS TECH, Vol. 15, N° 9 (09/2018)
PermalinkCharacterisation of coatings and coating materials by analytical centrifugation / U. Rietz in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 209, N° 4650 (04/2019)
PermalinkCharacterization, coating and biological evaluation of polyol esters rosin derivatives as coating films / A. A. Soliman in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 2 (03/2021)
PermalinkPermalinkPermalinkCoating failure : disbonding of an overcoat / Rob Lanterman in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 34, N° 6 (06/2017)
PermalinkA comparative study on coating properties of chemoenzymatically synthesised and conventional alkyd resins / Vilas D. Athawale in PAINTINDIA, Vol. LI, N° 3 (03/2001)
PermalinkConfocal microscopy techniques for coatings research / Wenjun Wu in COATINGS TECH, Vol. 16, N° 5 (05/2019)
PermalinkCorrosion protection by organic coatings containing polyaniline salts prepared by oxidative polymerization / M. Kohl in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 6 (11/2017)
PermalinkPermalinkDétermination du plomb total. Méthode par absorption atomique dans la flamme - Norme NF T 30-201 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1981)
Permalink