Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Application of the PTT model for capillary extrusion of rubber compounds / S. H. Choi in INTERNATIONAL POLYMER PROCESSING, Vol. XXIV, N° 4 (09/2009)
[article]
Titre : Application of the PTT model for capillary extrusion of rubber compounds Type de document : texte imprimé Auteurs : S. H. Choi, Auteur ; M.-Y. Lyu, Auteur Année de publication : 2009 Article en page(s) : p. 326-333 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Alliages polymères
Caoutchouc
Elastomères -- Extrusion
Extrusion capillaire
Gonflement (physique)
Phénomènes de relaxation (matériaux)
Simulation par ordinateur
ViscoélasticitéIndex. décimale : 668.9 Polymères Résumé : Rubber compounds have high viscoelastic property. One of the viscoelastic behaviors shown in profile extrusion is an extrudate swell and circulation flow at the corner of inside of die. Application of viscoelastic model to a capillary extrusion has been investigated in this study. Experiments and simulations have been performed using Fluidity Tester and commercial computational fluid dynamics (CFD) code, Polyflow respectively. Die swell of rubber compounds in a capillary die were predicted using a non-linear differential viscoelastic model, Phan-Thien and Tanner (PTT) model for various relaxation times and relaxation modes. As relaxation time and number of relaxation mode increase, die swell increases. The results of simulations were compared with the experiment. Pressure and velocity distributions, and circulation flows at the corner of reservoir have been analyzed through computer simulation. Two and three relaxation modes with large range of relaxation time examined in this study showed good agreement with experimental results of die swell and well represented circulation flow at the corner of reservoir in the capillary die. DOI : 10.3139/217.2172 En ligne : https://drive.google.com/file/d/1gPjMzxXA2tjrSuEJaB3HFkPoWSt4QHJG/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6077
in INTERNATIONAL POLYMER PROCESSING > Vol. XXIV, N° 4 (09/2009) . - p. 326-333[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011516 - Périodique Bibliothèque principale Documentaires Disponible Une approche modulaire pour la simulation numérique des composites stratifiés / Nicolas Feld in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 25, N° 2 (04-05-06/2015)
[article]
fait partie de Vol. 25, N° 2 - 04-05-06/2015 - Transition statique/dynamique dans les matériaux et structures composites (Bulletin de REVUE DES COMPOSITES ET DES MATERIAUX AVANCES) / Johann Rannou
Titre : Une approche modulaire pour la simulation numérique des composites stratifiés Type de document : texte imprimé Auteurs : Nicolas Feld, Auteur ; Nicolas Vallino, Auteur Année de publication : 2015 Article en page(s) : p. 161-179 Note générale : Bibliogr. Langues : Français (fre) Catégories : Composites à fibres -- Propriétés mécaniques
Endommagement (mécanique)
Fibres à orientation unidirectionnelle
Simulation par ordinateur
Stratifiés
Tissés
ViscoélasticitéIndex. décimale : 620.11 Matériaux (propriétés, résistance) Résumé : On propose ici une nouvelle approche permettant une description modulaire de la réponse de matériaux et structures composites stratifiés. La modularité en question repose sur la capacité du modèle à s’appliquer à la fois aux stratifiés à plis tissés et unidirectionnels, à différentes natures de constituants, et à prédire leur réponse dans des cas de charges variés, des plus longs (la fatigue) aux plus brefs (le crash). Pour ce faire, endommagement et anélasticité sont modélisés par une approche phénoménologique, tandis que les effets de dépendance à la vitesse sont capturés par une vision hiérarchique de la visco-élasticité. Dans cet article, l’approche est illustrée à travers l’identification des paramètres d’un composite tissé à fibres de verre et matrice polyamide et son application à la simulation numérique de la réponse d’un renfort de porte à un choc latéral. Note de contenu : - ÉTAT DE L'ART DE LA MODÉLISATION DES COMPOSITES STRATIFIES POUR LE CRASH
- DESCRIPTION DE L'APPROCHE MODULAIRE ET DE SES CARACTÉRISTIQUES : Le modèle de référence - Prise en compte des effets de vitesse
- APPLICATION A UN RENFORT DE PORTE EN COMPOSITE TISSE A FIBRES DE VERRE ET MATRICE POLYAMIDE : Identification des paramètres du modèle - Simulation d'un choc latéral sous-systèmeDOI : 10.3166/rcma.25.161-179 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24673
in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES > Vol. 25, N° 2 (04-05-06/2015) . - p. 161-179[article]Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17504 - Périodique Bibliothèque principale Documentaires Disponible Artificial intelligence - AI models for injection molding simulation / Werner Faulhaber in PLASTICS INSIGHTS, Vol. 113, N° 8 (2023)
[article]
Titre : Artificial intelligence - AI models for injection molding simulation : Arburg's vision : in the future, the machine will know the products it produces Type de document : texte imprimé Auteurs : Werner Faulhaber, Auteur Année de publication : 2023 Article en page(s) : p. 20-23 Langues : Anglais (eng) Catégories : Assurance qualité
Contrôle -- Appareils et matériels
Industrie 4.0Le concept d’Industrie 4.0 correspond à une nouvelle façon d’organiser les moyens de production : l’objectif est la mise en place d’usines dites "intelligentes" ("smart factories") capables d’une plus grande adaptabilité dans la production et d’une allocation plus efficace des ressources, ouvrant ainsi la voie à une nouvelle révolution industrielle. Ses bases technologiques sont l'Internet des objets et les systèmes cyber-physiques.
Intelligence artificielle
Logiciels
Matières plastiques -- Moulage par injection
Simulation par ordinateurIndex. décimale : 668.4 Plastiques, vinyles Résumé : Activities such as conversion, setup, start-up and process optimization usually require plastics processors to have comprehensive specialist knowledge. But how can cost-effective, high-quality injection molding production be ensured in times of a shortage of skilled workers and increasingly demanding materials? Arburg is working intensively on the topics of artificial intelligence (AI) and federated learning – with the aim that AI-based systems learn correlations themselves and actively readjust processes in order to optimize the yield and quality of injection molded parts in series production. Note de contenu : - Complex : design of experiment (doe)
- Profitable : predicting processes through data analysis
- Supportive : filling simulation directly in the machine controller
- Intelligent : AI-assisted filling analyses
- Self-adapting : machine and federated learning
- Confidential, but : it won‘t work without a desire to innovateEn ligne : https://drive.google.com/file/d/1VCuf5YSZm28a3nX9VMC4KzZv29jgUxDQ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40362
in PLASTICS INSIGHTS > Vol. 113, N° 8 (2023) . - p. 20-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24338 - Périodique Bibliothèque principale Documentaires Disponible Automated fibre placement and forming process simulation / Yvan Blanchard in JEC COMPOSITES MAGAZINE, N° 97 (05-06/2015)
[article]
Titre : Automated fibre placement and forming process simulation Type de document : texte imprimé Auteurs : Yvan Blanchard, Auteur ; Simon Veenstra, Auteur Année de publication : 2015 Article en page(s) : p. 66-68 Langues : Anglais (eng) Catégories : Composites à fibres
Fibres continues
Placement automatisé de fibres
Simulation par ordinateur
StratifiésIndex. décimale : 668.4 Plastiques, vinyles Résumé : Combining the automated fibre placement (AFP) process and the forming process creates the possibility to achieve automated high-volume production of optimized continuous-fibre composite parts. Tailored 2D laminates are produced by automated fibre placement and, after being heated, the laminates are stamped into their final 3D shape. Now there is a need to understand the physical behaviour of UD slit tape material during forming and to facilitate the transfer of data between AFP programming and forming process simulation. Coupling the two software solutions will significantly improve design optimization and reduce the time to market. Note de contenu : - The combined
- CORAC "Z-section" frame
- Software
- Software interface
- Numerical and experimental study of UD slit tape material formingPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24321
in JEC COMPOSITES MAGAZINE > N° 97 (05-06/2015) . - p. 66-68[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 17252 - Périodique Bibliothèque principale Documentaires Disponible 17253 - Périodique Bibliothèque principale Documentaires Disponible Automated optimization of hollow bodies / Benjamin Twardowski in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 12 (12/2017)
[article]
Titre : Automated optimization of hollow bodies : Application of computer-aided routines in the design of hollow bodies manufactured in the extrusion blow molding process Type de document : texte imprimé Auteurs : Benjamin Twardowski, Auteur ; Sarah Schäfer, Auteur ; Christian Hopmann, Auteur Année de publication : 2017 Article en page(s) : p. 39-43 Langues : Anglais (eng) Catégories : Bouteilles en matières plastiques
Matières plastiques -- Moulage par extrusion-soufflage
Simulation par ordinateurIndex. décimale : 668.4 Plastiques, vinyles Résumé : Improving the mechanical properties of hollow bodies using structural elements is not yet state-of-the-art in the blow molding industry. At the institute for plastics processing (IKV) at the RWTH Aachen University, an approach was developed for the computer-aided design of blow molded articles with stiffening structures. Note de contenu : - Empirical investigations of hollow bodies with corrugation structures
- Applied simulation routine
- Result of the optimization routine
- FIGURES : 1. Blow molding line and mold for the production of test specimens - 2. Wall thickness distribution of a bottle with beads and a bottle without beads in the same process point - 3. Wall thickness distribution along the beads - 4. Input data of the process simulation in B-SIM - 5. Comparison of the simulated and measured wall thickness distribution of the bottles with and without corrugation structures - 6. Comparison of topload simulation and experimental investigations with and without corrugation structures - 7. Comparison of measured topload and topload simulation with adjusted wall thickness distribution according to the measurements - 8. Deterministic optimization : radius, number and distortion are normalized by the maximum values - 9. Comparison of the bottle without corrugation structures and the deterministically optimized bottle - 10K Stochastic optimizationEn ligne : https://drive.google.com/file/d/16KsdYxyOQT41U3kCiWFkAvZEfw-yaU1S/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29681
in KUNSTSTOFFE INTERNATIONAL > Vol. 107, N° 12 (12/2017) . - p. 39-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19448 - Périodique Bibliothèque principale Documentaires Disponible Better computation of fiber-reinforced engine components / Kristin Raschke in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 10 (10/2019)
PermalinkA bike frame from an injection molding machine / Tim Hacken in KUNSTSTOFFE INTERNATIONAL, Vol. 110, N° 6 (2020)
PermalinkBody in black versus body in white / Alessia Nardinocchi in JEC COMPOSITES MAGAZINE, N° 119 (03/2018)
PermalinkBoeing simulates thermal expansion in composites with expanded metal foil for lightning protection of aircraft structures / Jennifer Segui in JEC COMPOSITES MAGAZINE, N° 99 (09/2015)
PermalinkDe Boltzmann aux expériences "in silico" / Anne Boutin in L'ACTUALITE CHIMIQUE, N° 353-354 (06-07-08/2011)
PermalinkBuilding a case for automated composite lay-up / Andre Colvin in JEC COMPOSITES MAGAZINE, N° 117 (11-12/2017)
PermalinkCalcul dynamique en régime transitoire / Ludovic Soufflet in CAOUTCHOUCS & PLASTIQUES, N° 821 (04/2004)
PermalinkCalculation concept shortens the design process of injection molded parts in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 1/2019 (2019)
PermalinkCalculer rapidement le retrait d'une pièce / Jean-Marc Maucotel in CAOUTCHOUCS & PLASTIQUES, N° 721 (03/1993)
PermalinkCalendering of thermoplastics : models and computations / Evan Mitsoulis in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 4 (2022)
PermalinkCaractérisation d'assemblages de polymères soudés / Vladimir Gantchenko in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 25, N° 3-4 (2e semestre 2015)
PermalinkCaractérisation des effets de taille finie dans les nano-objets : apport de la modélisation / Florent Calvo in L'ACTUALITE CHIMIQUE, N° 333 (08-09/2009)
PermalinkCFD analysis of the frame invariance of the melt temperature rise in a single-screw extruder / F. Habla in INTERNATIONAL POLYMER PROCESSING, Vol. XXVIII, N° 5 (11/2013)
PermalinkCFD simulation of paint deposition in an air spray process / M. Fogliati in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 2 (04/2006)
PermalinkLa chaîne numérique généralise ses outils / Laurence Meylheuc in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 865 (03-04/2009)
Permalink