Anti-fingerprint coatings / Steven Block in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 198, N° 4526 (07/2008)  

[article]  inPOLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 198, N° 4526 (07/2008) . - p. 16-19 Titre : Anti-fingerprint coatings Type de document : texte imprimé Auteurs : Steven Block, Auteur ; Peter Hupfield, Auteur ; Yasuo Itami, Auteur ; Eiji Kitaura, Auteur ; Don Kleyer, Auteur ; Tetsuya Masutani, Auteur ; Yasuhiro Nakai, Auteur Année de publication : 2008 Article en page(s) : p. 16-19 Langues : Anglais (eng) Catégories : Angle de contact Perfluoropolyéther Propriétés anti-empreintes Revêtements -- Additifs:Peinture -- Additifs Silanes Surfaces -- Nettoyage Index. décimale : 667.9 Revêtements et enduits Résumé : Stay-clean and easy-to-clean surface properties keep surfaces free of contamination from fingerprints and dirt. Achieving oil and water repellency on surfaces is easily obtained with the use of fluoroalkyl-modified silanes. While fluoroalkyl-modified silanes exhibit high static and advancing water and oil contact angles, their low receding contact angles mean the oil and water will not readily slide over the treated surface. The resulting effect of these characteristics yields a surface that is both easy to clean and stays clean longer. Ultimately, modified perfluoropolyether silanes give high static and advancing water and oil contact angles as well as high receding contact angles resulting in a very low sliding angle. The influence of structure modification of the silane and the perfluoropolyether component is examined. Their impact on performance by application method is also discussed. En ligne : https://drive.google.com/file/d/1DVo4NyO6UUFVon3LF5Itb6sQ8xXOr-2t/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27175 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
010612	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Aqueous cleaning process with solvent-based corrosion protection / Josef Klabuschnig in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 10, N° 3 (2017)

[article]  inINTERNATIONAL SURFACE TECHNOLOGY (IST) > Vol. 10, N° 3 (2017) . - p. 46-17 Titre : Aqueous cleaning process with solvent-based corrosion protection Type de document : texte imprimé Auteurs : Josef Klabuschnig, Auteur Année de publication : 2017 Article en page(s) : p. 46-17 Langues : Anglais (eng) Catégories : Anticorrosion Nettoyage -- Appareils et matériels Solutions aqueuses (chimie) solvants Surfaces -- Nettoyage Index. décimale : 671.7 Finissage et traitement des surfaces Résumé : A supplier to the automotive industry invested in a multi-chamber immersion machine in order to increase its capacity and the quality of its cleaning processes. The new machine can clean steel parts with complex shapes in short cycles using an aqueous process and can also apply a solvent-based corrosion protection solution. Note de contenu : - Improving quality, capacity and flexibility - Flexible, reliable parts cleaning - Fully automatic processes guarantee a high throughput - Fig 1. With batches 500 x 400 x 560 mm (W x B x H) in size and no solvent-based corrosion protection, the throughput is over 13 batches per hour. If the solvent-based process is used, the figure is around 12 batches per hour - Fig. 2. The machine has an integral evaporator for recycling the aqueous cleaning agent. Above it is a tank for contaminated water which can be used for interim storage of the water from the individual chambers Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29455 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
19368	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Aqueous scouring milk for cleaning hard surfaces with a proportion of an anionic surfactant based on calcium and magnesium salts of linear alkylbenzene acid / Klaus Henning in SOFW JOURNAL, Vol. 147, N° 10 (10/2021)  

[article]  inSOFW JOURNAL > Vol. 147, N° 10 (10/2021) . - p. 14-17 Titre : Aqueous scouring milk for cleaning hard surfaces with a proportion of an anionic surfactant based on calcium and magnesium salts of linear alkylbenzene acid Type de document : texte imprimé Auteurs : Klaus Henning, Auteur Année de publication : 2021 Article en page(s) : p. 14-17 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Abrasifs Détergents Formulation (Génie chimique) Polymères Produits nettoyants Sels de calcium Sels de magnésium Stabilité au stockage Sulfonates d'alkylbenzène Surfaces -- Nettoyage Surfactants Viscosité Index. décimale : 668.1 Agents tensioactifs : savons, détergents Résumé : The preparation of a storage-stable abrasive cleaning composition without dolomite as a starting material, in which no or only a very small amount of alkylbenzene acid magnesium salt (Mg-LAS) is present, is achieved by using alkoxylated fatty alcohols. Such a cleaning composition contains 1 to 15 wt.% alkylbenzene acid calcium salt (Ca-LAS) at a proportion of Mg-LAS ≤ 1% of the amount of calcium salt as well as 0.5 to 10 wt.% alkoxylated fatty alcohol. Note de contenu : - Cleaning agents with abrasive effect - Avoiding phase separation : Non-ionic surfactants - Viscosity - Abrasives - olymers - Other components - Preparation of an aqueous scouring milk for hard surfaces that is free of Mg-LAS - Explanatory notes - Table 1 : Compositions of aqueous abrasive cleaning agents - Table 2 : Storage stability test En ligne : https://drive.google.com/file/d/1IiyFVVC_X5hwuz7vnh5P_AwShcUrkIhV/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36551 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
22967	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Assuring parts cleanliness, increasing economic efficiency in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 7, N° 2 (2014)  

[article]  inINTERNATIONAL SURFACE TECHNOLOGY (IST) > Vol. 7, N° 2 (2014) . - p. 37-39 Titre : Assuring parts cleanliness, increasing economic efficiency Type de document : texte imprimé Année de publication : 2014 Article en page(s) : p. 37-39 Langues : Anglais (eng) Catégories : Mesure Métaux -- Nettoyage Pièces usinées -- Nettoyage Surfaces -- Nettoyage Surfactants Tension superficielle Index. décimale : 671.7 Finissage et traitement des surfaces Résumé : Waterbased cleaning agents have optimal effects when their components are regularly monitored, carefully dosed and their concentrations are kept stable. This assures not only stable parts cleanliness but also increases the economic efficiency of cleaning processes. Note de contenu : - Change in concentration - Insufficient parts cleanliness caused by surfactant depletion - Monitoring assures stable cleanliness - Bubble pressure tensiometrie - Measuring the surface tension - Devices for manual and automated monitoring En ligne : https://drive.google.com/file/d/1WOL0rz8Ue9O0HiYHEDsfLMA9pv5iWmRU/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21918 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
16451	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Chrome VI-free pretreatment of ABS / Dieter Lehmann in KUNSTSTOFFE INTERNATIONAL, Vol. 108, N° 1-2 (01-02/2018)  

[article]  inKUNSTSTOFFE INTERNATIONAL > Vol. 108, N° 1-2 (01-02/2018) . - p. 10-12 Titre : Chrome VI-free pretreatment of ABS : Metallized ABS moldings without chromosulfuric acid pickling Type de document : texte imprimé Auteurs : Dieter Lehmann, Auteur ; Jürgen Nagel, Auteur ; Philip Zimmermann, Auteur Année de publication : 2018 Article en page(s) : p. 10-12 Langues : Anglais (eng) Catégories : Chrome hexavalent -- Suppression ou remplacement Dépôt électrolytique Matières plastiques -- Métallisation Surfaces -- Nettoyage Terpolymère acrylonitrile butadiène styrène Traîtements de surface Index. décimale : 668.4 Plastiques, vinyles Résumé : Since September 21, 2017 the use of Cr(VI) compounds for pickling ABS surfaces is only possible with a temporary permit throughout the EU. Therefore, a substitute process is presented, which can be integrated into existing process chains, and creates high-grade, securely bonded metal plating. Note de contenu : - Conventional procedures for surface modification - Chemical modification and nickel deposit - High bonding strength through chemical coupling - Fig. 1. Diagram of the reactive surface modification of ABS with peracetic acid, the coupling of polyamine, and the embedding of palladium ions - Fig. 2. Surface of ABS molding with the conducting nickel layer after the cross-cut and adhesive tape tests En ligne : https://drive.google.com/file/d/1iivXbjkve7XSy3q_ZhvNXxKi1nuA4iOR/view?usp=drive [...] Format de la ressource électronique : Pdf Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30082 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
19625	-	Périodique	Bibliothèque principale	Documentaires	Disponible

Clean substrates for specific painting processes in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 13, N° 4 (2020)

Permalink

Cleaning can lead to defective coatings / Heike Schuster in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 15, N° 4 (2022)

Permalink

Cleaning up to cookshop / Heidi Van den Rul in EUROPEAN COATINGS JOURNAL (ECJ), N° 11 (11/2016)  

Permalink

Coatings trends for plastic parts in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 22, N° 2 (02/2015)  

Permalink

Controlled cleanliness / René Welke in ADHESION - ADHESIVES + SEALANTS, Vol. 13, N° 2/2016 (2016)  

Permalink

Controlling cleanliness automated and at the process / Stefan Büttner in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 15, N° 4 (2022)

Permalink

Convenience as a major trend in hard surface cleaning / Hannah Benson in SOFW JOURNAL, Vol. 145, N° 5 (05/2019)  

Permalink

Corrosion and its control in sugar industry / Raghavendra Pratap in PAINTINDIA, Vol. LXVII, N° 1 (01/2017)  

Permalink

Corrosion and protection of bridges (Part 2) / P. K. Kamani in PAINTINDIA, Vol. LXV, N° 3 (03/2015)  

Permalink

Dry cleaning can favor adhesion in ADHESION - ADHESIVES + SEALANTS, Vol. 16, N° 2/2019 (2019)  

Permalink

Dry ice shower for complex components / Christiane Rach in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 9 (09/2017)  

Permalink

Dust no longer stands a chance in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 9, N° 2 (2016)

Permalink

Easy to clean - Complete removal of graffiti / Thorben Bahrenburg in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 13, N° 4 (2020)

Permalink

Effective cleaning through a second skin – Why proteins improve cleaning / Matthias Reihmann in SOFW JOURNAL, Vol. 146, N° 3 (03/2020)  

Permalink

Efficient and reliable process for pretreating structural joining surfaces in ADHESION - ADHESIVES + SEALANTS, Vol. 17, N° 3/2020 (2020)  

Permalink

---

1 2 3 4 (1 - 20 / 75) Par page : 25 50 Tout afficher