![](./images/home.jpg)
![](./images/bar_spacer.gif)
Catégories
![](./images/expand_all.gif)
![](./images/collapse_all.gif)
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : Pursue greener : Sustainable CNSL- based diluent for high-performance low-VOC protective coatings Type de document : texte imprimé Auteurs : Hong Xu, Auteur ; Joseph Mauck, Auteur ; James Zhao, Auteur Année de publication : 2023 Article en page(s) : p. 36-43 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Anticorrosion
Diluants
Epoxydes
Formulation (Génie chimique)
Noix de cajou et constituants
Primaire (revêtement)
Résistance chimique
Revêtements -- Propriétés mécaniques
Revêtements en phase aqueuse -- AdditifsIndex. décimale : 667.9 Revêtements et enduits Résumé : A novel multi-functional epoxy diluent has been developed based on natural and non-food chain cashew nutshell liquid (CNSL) to help formulators create high-performance protective coatings with a lower carbon footprint. Performance testing revealed benefits in VOC reduction and greater flexibility as well as improved resistance. Note de contenu : - Experimental
- Multi-functional diluents have lower impact on reactivity
- Improved chemical resistance indicate broader application possibilities
- Corrosion resistance retained with multi-functional diluents
- Special application as a modifier in water-borne epoxy systems
- Flexible systems with good tensile strength
- New diluent reduces viscosity and offers added benefits
- Table 1 : Technical data of diluents used in this study
- Table 2 : Technical data of curing agents in this study
- Table 3 : Formulation of pigmented epoxy primers with vairous diluents
- Table 4 : Formulations of water-borne epoxy screed systemsEn ligne : https://drive.google.com/file/d/1u9umw1Vr_3eaU46bW0TsQ03WHKnqL4jK/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39323
in EUROPEAN COATINGS JOURNAL (ECJ) > (05/2023) . - p. 36-43[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 23965 - Périodique Bibliothèque principale Documentaires Disponible 23966 - Périodique Bibliothèque principale Documentaires Disponible Pushing back the boundaries / Florian E. Golling in EUROPEAN COATINGS JOURNAL (ECJ), N° 2 (02/2020)
![]()
[article]
Titre : Pushing back the boundaries : Taking polyurethane chemistry to the next level Type de document : texte imprimé Auteurs : Florian E. Golling, Auteur ; Ann-Christin Bijlard, Auteur ; Dirk Achten, Auteur ; Jan Weikard, Auteur ; Christoph Thiebes, Auteur ; Raul Pires, Auteur Année de publication : 2020 Article en page(s) : p. 20-24 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse thermique
Colles:Adhésifs
Isocyanates
Polyuréthanes
Résistance chimique
Revêtements organiques
Stabilité thermique
ThermogravimétrieIndex. décimale : 667.9 Revêtements et enduits Résumé : Polyurethane coatings and adhesives are used in all kinds of applications throughout industry. Trimerisation of isocyanate groups affords new polyisocyanurate-based coatings and adhesives that outperform their isocyanate-based counterparts. Note de contenu : - Goodbye polyols
- Hello polyisocyanurates
- Isocyanate chemistry
- Properties of polyisocyanurate materials
- Greater heat stability
- Better solvent resistance
- A clean sweep
- Formulation and application
- Fig. 1 : Depiction of the urethane and isocyanurate moielties
- Fig. 2 : Established chemistry of PU coating raw materials (examples)
- Fig. 3 : Polytrimerisation as a means of forming coating and adhesives networks
- Fig. 4 : Thermogravimetric analysis (TGA) of PU and a HDI-based polyisocyanurate coating and differential scanning calorimetry (DSC)
- Fig. 5 : Solvent resistance
- Fig. 6 : OH-functional dispersion crosslinked with1-101-trimer affer third cycle (cycle = 50 °C, 48 h) : Edding No. 1 Permanent black, 5taedfler Marker + fuchsin solution red, Edding 3000 Permanent Marker green, Edding No. 1 black + brake fluid and HOT-based polyisocyanurate coating alter fhird cycle (cycle = 50 °C, LIS h) : Edding No. 1 Permanent black, Edding 3000 Permanent Marker green, Edding No. 1 black + brake Muid, 5haedhler Marker + fuchsin solution red. Boit images show the coating surface affer coating remover was appliedEn ligne : https://drive.google.com/file/d/1bxolFgEfgtwD5RNKqnQODsOHMSr9ZUK_/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33518
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 2 (02/2020) . - p. 20-24[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21541 - Périodique Bibliothèque principale Documentaires Disponible Qualification tests for high-temperature FBE coatings / Hassan Al-Sagour in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 7 (07/2018)
[article]
Titre : Qualification tests for high-temperature FBE coatings Type de document : texte imprimé Auteurs : Hassan Al-Sagour, Auteur ; Mana Al-Mansour, Auteur Année de publication : 2018 Article en page(s) : p. 34-43 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Chimie analytique
Décollement cathodique (revêtement)
Essais de résilience
Evaluation visuelle
Fonctionnelles densitéLa théorie de la fonctionnelle de la densité (pour Density Functional Theory, sous-entendu électronique : DFT) constitue au début du XXIe siècle l'une des méthodes les plus utilisées dans les calculs quantiques de la structure électronique de la matière (atomes, molécules, solides) aussi bien en physique de la matière condensée qu'en chimie quantique. La DFT trouve ses origines dans le modèle développé par Llewellyn Thomas et Enrico Fermi à la fin des années 1920.
Hautes températures
Résistance chimique
Revêtement époxy lié par fusion
Revêtements -- Propriétés mécaniques
Revêtements -- Propriétés thermiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : This experiment helps to confirm some already well-established theories, in addition to a few new findings.
* There are existing FBE formulations that can handle immersion in chemically agressive solutions at high temperatures.
* Only one product of the three tested qualified for use at high temperatures (140 C). More FBE products that can handle such higher temperatures are needed.
* Notably, there is a compromise in flexibility for high-temperature FBE coatings.
* Highly alkaline media is the most agressive to FBE coatings at high temperatures.
* Discoloration may be a sign of failure, especially when associated with changes in other properties, such as thickness (increased swelling), loss of adhesion and degrading barrier property (low impedance).
* In immersion, wet glass transition temperature may be a much lower than the dry Tg. In more agressive conditions, the gap between dry and wet Tg may be even wider.
* The type of application used for coating samples may be detrimental to tests. This claim must be investigated further.
* Because coating shops use spray application, testing samples should be sprayed or taken from actual shop application.Note de contenu : - EXPERIMENTAL DESIGN AND TEST METHODOLOGY : Attenuated total reflectance -Fourier transform infrared spectroscopy - Thermal analysis - Differential scanning calorimetry (DSC) - Flexibility (Bending test) - Impact resistance - Cathodic disbondment - Chemical resistance - DFT measurements - Pull-off adhesion - EIS
- DISCUSSION : Coating A - Coating A' - Coating B - Coating C
- Table 1 : Thermal characteristics of the four coatings
- Table 2 : Flexibility readings (in °/pd)
- Table 3 : Impact resistance measurements
- Table 4 : Average disbondment
- Table 5 : Visual examination post-immersion
- Table 6 : DFT measurements post-immersion in NaOH solution
- Table 7 : Pull-off adhesion before and after chemical resistance test (psi)
- Table 8 : Electrochemical impedance spectroscopy (EIS)
- Fig. 1 : Sampld DSC graphs for coating APermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31876
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 35, N° 7 (07/2018) . - p. 34-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20085 - Périodique Bibliothèque principale Documentaires Disponible Quid des TDAE/DAE plastifiantes en vigueur ? / Almudena Iznart-Garcia in CAOUTCHOUCS & PLASTIQUES, N° 804 (05/2002)
[article]
Titre : Quid des TDAE/DAE plastifiantes en vigueur ? Type de document : texte imprimé Auteurs : Almudena Iznart-Garcia, Auteur ; Luis Ibarra, Auteur Année de publication : 2002 Article en page(s) : p. 66-71 Langues : Français (fre) Catégories : Caoutchouc styrène-butadiène
Chimie industrielle -- Législation -- Pays de l'Union européenne
Composés aromatiques
Huiles et graisses
Hydrocarbures aromatiques polycycliques -- Toxicologie
Résistance chimiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : Dénommées Treated distillate aromatic extract (TDAE), les huiles aromatiques non étiquetables offrent aujourd'hui de nombreux atouts tout en répondant à la réglementation en vigueur. Note de contenu : - LÉGISLATION EUROPÉENNE
- PRÉSENT ET AVENIR DES HUILES DE PROCÉDÉ
- COMPORTEMENT DANS LE CAOUTCHOUC SBR : Effets sur le procédé - Propriétés face au vieillissement - Performance
- LE PROBLÈME DE LA RÉSISTANCE A L'OZONEPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23881
in CAOUTCHOUCS & PLASTIQUES > N° 804 (05/2002) . - p. 66-71[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000527 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Rapid aging prevented Type de document : texte imprimé Auteurs : Rudolf Pfaendner, Auteur Année de publication : 2013 Article en page(s) : p. 46-48 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Charges (matériaux)
Copolymère styrène acrylate glycidyle méthacrylate
Matières plastiques -- Additifs
Matières plastiques -- Détérioration
Photo-oxydation
Résistance chimiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : The presence of fillers causes polymers to age rapidly. The reason is that fillers can render the stabilizers in the formulation ineffective. Extensive studies have shown that the addition of a deactivator based on glycidyl copolymers prevents this. Note de contenu : - Negative influence on stability
- Deactivator eradicates weaknesses
- Stability multiplied, properties enhancedPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18636
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 5 (05/2013) . - p. 46-48[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15093 - Périodique Bibliothèque principale Documentaires Disponible PermalinkRe-engineering resins and paints / Silfredo Javier Bohorquez in EUROPEAN COATINGS JOURNAL (ECJ), N° 1 (01/2017)
![]()
PermalinkRelca® HY-288 : water-based hybrid for coatings with superior stain resistance / Sara Roig in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4660 (04/2020)
![]()
PermalinkPermalinkA la rescousse des diesels propres / Wolfgang Sauerer in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 865 (03-04/2009)
PermalinkRéservoirs enterrés en plastiques renforcés de verre (PRV). Détermination du facteur α et du facteur β - Norme NF EN 978 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1997)
PermalinkRéservoirs enterrés en plastiques renforcés de verre (PRV). Méthode d'exposition unilatérale d'une plaque aux fluides - Norme NF EN 977 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1997)
PermalinkResistance of high-performance fibers depending on environmental conditions / Heidrun Rudolph in CHEMICAL FIBERS INTERNATIONAL, Vol. 63, N° 2 (05/2013)
![]()
PermalinkPermalinkUn revêtement acrylique incolore en poudre pour l'équipement automobile / Holger Schmidt in EUROPEAN COATINGS JOURNAL (ECJ), N° 9/94 (09/1994)
PermalinkSeamless tubular filter made of high-tech fibers in MAN-MADE FIBERS INTERNATIONAL, Vol. 73, N° 3 (2023)
![]()
PermalinkPermalinkPermalinkSelf-crosslinkable urethanes and urethane/acrylics / Ronald Tennebroek in EUROPEAN COATINGS JOURNAL (ECJ), N° 11/97 (11/1997)
PermalinkSilane-functional polyurethane-urea resins in ultra high solid coatings / Lars Ossenschmidt in SURFACE COATINGS INTERNATIONAL, Vol. 106.6 (11-12/2023)
![]()
PermalinkSilicone technology for aerospace and aircraft / Brian Burkitt in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 10 (10/2013)
![]()
PermalinkA simple method to make mechanically robust, adhesive and superhydrophobic surface based on epoxy resin / Aoyun Zhuang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 12, N° 3 (05/2015)
![]()
PermalinkPermalinkSingle-component polysiloxane topcoat for navy surface ships / Erick B. Iezzi in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 33, N° 11 (11/2016)
![]()
PermalinkSingle-layer concrete protection based on sol-gel hybrid polymers / Georg Wagner in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4609 (06/2015)
![]()
Permalink