Accueil
JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) . Vol. CXI, N° 7Mention de date : 07/2016Paru le : 10/07/2016 |
Dépouillements
Ajouter le résultat dans votre panierEffect of pH on Al/Zr-binding sites between collagen fibers in tanning process / Shan Cao in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXI, N° 7 (07/2016)
[article]
Titre : Effect of pH on Al/Zr-binding sites between collagen fibers in tanning process Type de document : texte imprimé Auteurs : Shan Cao, Auteur ; Yunhang Zeng, Auteur ; Baozhen Cheng, Auteur ; Wenhua Zhang, Auteur ; Bing Liu, Auteur Année de publication : 2016 Article en page(s) : p. 242-249 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Collagène
Liaisons chimiques
pH
Tannage minéralTannage dans lequel interviennent différents minéraux. Le plus répandu est le tannage aux sels de chrome, mais aussi à l’aluminium
ZirconiumIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : In this article, near infrared reflection (NIR) spectra were employed to investigate the pH influences on binding behaviors of collagen fiber (CF) towards conventional non-chrome inorganic salts (Al and Zr). Based on the analyses of NIR and corresponding 2D NIR spectra, the binding capacity of Al (or Zr) contributed by each type of functional groups on CF was successfully evaluated at different pH conditions by carried out the aluminum tanning (or zirconium tanning) to native CF deaminated collagen fiber (DACF) and decarboxylated collagen fiber (DCCF), respectively. Our experimental results indicated that, for aluminum tanning, both the carboxyl group and amino group of CF are the active sites responsible for Al-binding and the reactivity of carboxyl group to aluminum is higher than that of amino group. However, the amino binding sites are more influenced with different pH. As for zirconium tanning, amino group and carboxyl group are still the active binding sites while the reactivity of amino group is higher than that of carboxyl group in the pH range of 0.5~1.5 which increases with the increasing tanning pH. Furthermore, based on the analysis of Fourier transform infrared spectra of polycaproamides reacted with zirconium at different pH, it was found that the amide group in collagen is responsible for Zr-binding between collagen fibers and its reactivity with zirconium increases with the rise in pH. Note de contenu : - EXPERIMENTAL PROCEDURES : Materials - Preparation of DACF - Preparation of DCCF - Determination of precipitation pH of aluminum and zirconium - Preparation of collagen fiber samples
- RESULTS AND DISCUSSION : Precipitation pH of Al3+ and Zr4+ - XPS analysis of Al-CF - Effectof pH on aluminum-binding sites between collagen fibersEn ligne : https://drive.google.com/file/d/1XQ8fzr_DRLhXpkh8WNsoSiGYVYSScCfY/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26714
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXI, N° 7 (07/2016) . - p. 242-249[article]Réservation
Réserver ce documentUse of ternary solvent (water - ethanol - ethyl acetate) medium for leather processing : a possible paradigm change / Bhargavi Narayana Reddy Gari in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXI, N° 7 (07/2016)
[article]
Titre : Use of ternary solvent (water - ethanol - ethyl acetate) medium for leather processing : a possible paradigm change Type de document : texte imprimé Auteurs : Bhargavi Narayana Reddy Gari, Auteur ; Solomon Fessehaye, Auteur ; Rathinam Aravindhan, Auteur ; Kalarical Janardhanan Sreeram, Auteur ; Jonnalagadda Raghava Rao, Auteur ; Balachandran Unni Nair, Auteur Année de publication : 2016 Article en page(s) : p. 250-258 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acétate d'éthyle L'acétate d'éthyle (éthanoate d'éthyle) est un liquide, à l'odeur caractéristique du dissolvant de vernis à ongles. C'est un ester résultant de l'éthanol et de l'acide acétique utilisé principalement comme solvant. On le trouve, à l'état naturel, en faibles quantités dans le rhum et dans les raisins endommagés par la grêle.
L'acétate d'éthyle est un solvant de polarité moyenne, peu toxique15 et non hygroscopique, qui possède une grande volatilité. C'est un accepteur faible en raison de liaisons hydrogène. Il peut dissoudre jusqu'à 3 % d'eau et possède une solubilité dans l'eau de 8 % à température normale. Cette solubilité augmente avec la température. Il est instable au contact de bases et d'acides forts en présence desquels il est hydrolysé en acide acétique (acide éthanoïque) et éthanol.
Il est rarement utilisé comme solvant pour une réaction chimique en raison de sa réactivité avec les bases et les acides.
Alcool
Caractérisation
Colorants
Colorants -- Adsorption
Cuirs et peaux
Cuirs et peaux -- Analyse
Diffusion (physique)
Eau
Evaluation visuelle
Isotherme d'adsorption
Mélanges (chimie)
Morphologie (matériaux)
Solubilité
solvants
Syntans
Taille des particulesIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : An attempt to replace water (7-10 m3/ton) in leather processing with a ternary mixture of solvents that would have a lower boiling point than water (for easy recovery through evaporation) and also bring about maximum solubility of conventional dyes, syntans and fatliquors is reported. The ternary mixture (Water – ethanol – ethyl acetate) reported in this study provided for good solubility/dispersion of leather chemicals. Average particle size of the syntan/dye in solvent / water remaining the same, particle size distribution of dyes and syntans was advantageous in the solvent medium, leading to better diffusion. Amongst various trials, neutralization of the leathers after tanning in solvent medium followed by use of neutralization syntans was found to be more advantageous to obtain leather properties comparable to conventional controls. The adsorption studies of dye used in the present study followed Freundlich model in both solvent and water medium indicates multilayer adsorption. Physical properties of the leathers were similar to that of control, indicating clearly that the solvent had no adversary effect on collagen and also provided for good diffusion and fixation of chemicals. The method thus reported in this study could provide for a minimum change approach to leather processing with ample contribution to water saving. Note de contenu : - EXPERIMENTAL : Materials and methods - Dynamic light scattering measurements - Post tanning experiments - Characterization of the leathers - Scanning electron microscopic (SEM) analysis - Visual assessment - Adsorption equilibrium and diffusion coefficient studies of the dye
- RESULTS AND DISCUSSION : Compatibility of leather auxiliaries with ternary solvent mixture - Particle size distribution - Characteristic features of the leather - Color coordinates - Visual assessment - Morphological evaluation of leather - Adsorption isotherms - Calculation of diffusion coefficient of the dye in solvent mediumEn ligne : https://drive.google.com/file/d/17SM8h2MCUkyzwOI_-A5-d7pK_oTtVtJJ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26715
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXI, N° 7 (07/2016) . - p. 250-258[article]Réservation
Réserver ce documentPerformance of microbicides for the preservation of vegetable tanned leather / Juliana T. Fontoura in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXI, N° 7 (07/2016)
[article]
Titre : Performance of microbicides for the preservation of vegetable tanned leather Type de document : texte imprimé Auteurs : Juliana T. Fontoura, Auteur ; D. Ody, Auteur ; Mariliz Gutterres, Auteur Année de publication : 2016 Article en page(s) : p. 259-266 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Antifongiques
Formulation (Génie chimique)
Produits de conservation du cuir
Tannage végétalIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : In the tanning industry, the deterioration of leather due to the development of fungi is of great concern. Some fungi metabolize important substances in leather, causing serious damage such as pigmented stain that is difficult to remove, defects, surface roughness, and loss of physical and mechanical resistance, which affect the quality of the final product. This work evaluated the performance of five microbicides conventionally used in the leather industry, against different fungi. Microbicides were applied during the tanning process with vegetable tannin in the fatliquoring step. Accelerated microbiological tests (plating and tropical chamber) were performed. The results revealed a low antifungal capacity of selected microbicides when applied at an offer of 0.2% (mass hide base) fungicides. Treatment with OIT+BMC/water at an offer of 0.75% showed satisfactory fungal protection against different fungi tested and proved to be the most suitable for the preservation of vegetable tanned leather. Note de contenu : - Materials and application of microbicides to leather
- Accelerated microbiological tests
- Plating test
- Incubation in a tropical chamber
- Scanning electron microscopy (SEM)
- TABLES : 1. Formulation of tanning process with vegetable tannin - 2. Inhibition distance (ID) and fungal growth on the surface (FGS) after 28 days on vegetable tanned leather samplesEn ligne : https://drive.google.com/file/d/19V571dRsyJUQtBXny5Y332Wi4HA95uMc/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26716
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXI, N° 7 (07/2016) . - p. 259-266[article]Réservation
Réserver ce documentDevelopment of micro-nanocomposites with antibacterial effect for leather and textile / Anna Bacardit in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXI, N° 7 (07/2016)
[article]
Titre : Development of micro-nanocomposites with antibacterial effect for leather and textile Type de document : texte imprimé Auteurs : Anna Bacardit, Auteur ; Concepcio Casas, Auteur ; Jordi Bou, Auteur ; Lluis Ollé, Auteur Année de publication : 2016 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Antimicrobiens
Argent
Caractérisation
Cuirs et peaux -- Conservation
Encapsulation
Huiles et graisses végétales
Nanoparticules
Polymères
Revêtements
Textiles et tissus à usages techniquesIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : The aim of this work was to develop new systems of micro/nanocomposites to confer new functions to materials used for seats of public vehicles and public spaces. Specifically, this study focuses on antibacterial effect for leather and technical textile substrates.
The first stage of the research consists of a selection of micro/micro/nanomaterials and active principles: selection and evaluation of micro/nanoparticles, antibacterial and antifungal substances. In the second stage, the process of encapsulation of active principles was studied. The research includes optimization of the encapsulation process by improving the size and stability of the capsules. In addition, the synthesis of a hybrid organic-inorganic polymer acting as a micro/micro/nanomaterial carrier was developed.
To understand the mechanisms of synthesis and action of micro/micro/nanomaterials, characterization techniques have been used: scanning electron microscopy SEM and optical microscopy, analysis and distribution of particle size (DLS, Zetasizer). Regarding the antibacterial and antifungal ability of micro/nanocomposites, we adapted standard ASTM 2180-07 "Test methods for determining the activity or incorporated antimicrobial agent (s) in polymeric or hydrophobic materials."
Different products have been developed and the results obtained allow us to conclude that the synthesized products showed inhibition to the growth of bacteria and fungi on the contact surface.Note de contenu : - EXPERIMENTAL : Reagents - Characterization of the products obtained
- RESULTS : Encapsulation of natural oils of antibacterial effect - Synthesis of coatings with polymers incorporating reactants with known antibacterial effects in their structure - Synthesis of coatings with silver particles - Characterization of the selected compounds - Bactericidal and fungicidal capacity of the selected compoundsEn ligne : https://drive.google.com/file/d/1jbqgQWk9lSXQCavzQ6FD1VT6SCfpsPBj/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26717
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXI, N° 7 (07/2016)[article]Réservation
Réserver ce document