Accueil
Résultat de la recherche
4 résultat(s) recherche sur le tag 'sorption'
Ajouter le résultat dans votre panier Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche
Synthesis, spectral and dyeing properties of phenylazopyrazolone-containing acylamide disperse dyes designed for poly(lactic acid) / Zhihua Cui in COLORATION TECHNOLOGY, Vol. 128, N° 4 (2012)
[article]
Titre : Synthesis, spectral and dyeing properties of phenylazopyrazolone-containing acylamide disperse dyes designed for poly(lactic acid) Type de document : texte imprimé Auteurs : Zhihua Cui, Auteur ; Xidong Wang, Auteur ; Weiguo Chen, Auteur ; Enling Hu, Auteur ; Kai Liu, Auteur Année de publication : 2012 Article en page(s) : p. 283-289 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Absorption
Colorants -- Synthèse
Colorants phénylazopyrazolone
Polylactique, AcideL'acide polylactique (anglais : polylactic acid, abrégé en PLA) est un polymère entièrement biodégradable utilisé dans l'alimentation pour l'emballage des œufs et plus récemment pour remplacer les sacs et cabas en plastiques jusqu'ici distribués dans les commerces. Il est utilisé également en chirurgie où les sutures sont réalisées avec des polymères biodégradables qui sont décomposés par réaction avec l’eau ou sous l’action d’enzymes. Il est également utilisé pour les nouveaux essais de stent biodégradable.
Le PLA peut-être obtenu à partir d'amidon de maïs, ce qui en fait la première alternative naturelle au polyéthylène (le terme de bioplastique est utilisé). En effet, l'acide polylactique est un produit résultant de la fermentation des sucres ou de l'amidon sous l'effet de bactéries synthétisant l'acide lactique. Dans un second temps, l'acide lactique est polymérisé par un nouveau procédé de fermentation, pour devenir de l'acide polylactique.
Ce procédé conduit à des polymères avec des masses molaires relativement basses. Afin de produire un acide polylactique avec des masses molaires plus élevées, l'acide polylactique produit par condensation de l'acide lactique est dépolymérisé, produisant du lactide, qui est à son tour polymérisé par ouverture de cycle.
Le PLA est donc l’un de ces polymères, dans lequel les longues molécules filiformes sont construites par la réaction d’un groupement acide et d’une molécule d’acide lactique sur le groupement hydroxyle d’une autre pour donner une jonction ester. Dans le corps, la réaction se fait en sens inverse et l’acide lactique ainsi libéré est incorporé dans le processus métabolique normal. On obtient un polymère plus résistant en utilisant l'acide glycolique, soit seul, soit combiné à l’acide lactique.
Solvatochromisme
Teinture -- Fibres textiles synthétiquesTags : 'Acide polylactique' 'Fibres synthétiques' Teinture 'Colorants phenylazopyrazolone' acrylamides' Chloration Amidation Amines 'Spectroscopie transformée Fourier' 'Propriétés solvatochromiques' Diméthylformamide Sorption Index. décimale : 667.3 Teinture et impression des tissus Résumé : A series of phenylazopyrazolone disperse dyes containing an acylamide moiety were synthesised from carboxyl-containing acid dyes via chlorination and amidation with different sorts of amines. The structures of these new dyes were confirmed by Fourier Transform–infrared, proton nuclear magnetic resonance, mass spectroscopy and elemental analysis. Their solvatochromic properties in different solvents were also investigated and the absorbance spectra of the acylamide dyes in solution exhibited a red shift when dissolved in dimethylformamide, compared with acetone. Their dyeing behaviour, including dye sorption, colour build-up and colour fastness properties on poly(lactic acid) fibres, was also determined, whereupon it was found that the tertiary acylamide dyes simultaneously exhibited high dye sorption and satisfactory colour build-up and fastness properties on the poly(lactic acid) fabric. Note de contenu : - EXPERIMENTAL : Materials, equipment and analysis - Synthesis of acid dye 1 - Synthesis of acyl chloride 2 - Synthesis of disperse 3a-i - Dyeng - Dye sorption - Shade depth - Fastness test - Partition coefficient and standard affiniti
- RESULTS AND DISCUSSION : Synthesis and characterisation - Spectral properties - Dye sorption and standard affinity - Colour build-up and colour fastnessDOI : 10.1111/j.1478-4408.2012.00376.x En ligne : http://onlinelibrary.wiley.com/doi/10.1111/j.1478-4408.2012.00376.x/pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=15676
in COLORATION TECHNOLOGY > Vol. 128, N° 4 (2012) . - p. 283-289[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14081 - Périodique Bibliothèque principale Documentaires Disponible Removal of methylene blue from aqueous solutions by using cold plasma- and formaldehyde-treated onion skins / Cafer Saka in COLORATION TECHNOLOGY, Vol. 127, N° 4 (2011)
[article]
Titre : Removal of methylene blue from aqueous solutions by using cold plasma- and formaldehyde-treated onion skins Type de document : texte imprimé Auteurs : Cafer Saka, Auteur ; Ömer Satin, Auteur Année de publication : 2011 Article en page(s) : p. 246-255 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adsorption
Bleu de méthylèneTags : 'Bleu méthylène' Adsorption' 'Plasma froid' 'Peau oignon' Formaldéhyde Biosorbant Sorption 'Modèles isothermes' FTIR Index. décimale : 667.3 Teinture et impression des tissus Résumé : In this paper, the use of cold plasma-treated and formaldehyde-treated onion skins as a biosorbent has been investigated to remove methylene blue dye from aqueous solutions. The surface characteristics of the treated onion skins were investigated using Fourier Transform–infrared spectroscopy. The influence of process variables such as adsorbent dosage, initial dye concentration and pH were studied. Equilibrium isotherms were analysed by Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. The results indicated that the data for adsorption of methylene blue onto onion skins fitted well with the Langmuir isotherm model. The sorption capacities for cold plasma-treated and formaldehyde-treated onion skins by Langmuir isotherm were found to be 250 and 166.67 mg/g, respectively. The equilibrium time was found to be 150 min for 50 mg/l dye concentrations. The maximum removals for cold plasma-treated and formaldehyde-treated onion skins obtained were 90.94 and 95.54% at natural pH 10.0 for adsorbent doses of 0.15 g/200 ml, respectively. The rates of sorption were found to conform to pseudo-first-order kinetics. Results indicated that onion skins could be used as a biosorbent to remove methylene blue dye from contaminated waters. Note de contenu : - Zero point of charge determination
- Effect of plasma applying time on surface area
- FTIR analysis
- Effect of pH
- Effect of contact time and initial concentration on adsorption
- Effect of adsorbent dosage on adsorption kinetics
- Adsorption kinetic studies
- Adsorption isotherms modelsDOI : 10.1111/j.1478-4408.2011.00306.x Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11905
in COLORATION TECHNOLOGY > Vol. 127, N° 4 (2011) . - p. 246-255[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 013185 - Périodique Bibliothèque principale Documentaires Disponible The effects of neutralizing bases on the water sensitivity of HEURASE rheology modifiers and their performance in low VOC paints / Greg D. Shay in SURFACE COATINGS INTERNATIONAL, Vol. 80, N° 6 (06/1997)
[article]
Titre : The effects of neutralizing bases on the water sensitivity of HEURASE rheology modifiers and their performance in low VOC paints Type de document : texte imprimé Auteurs : Greg D. Shay, Auteur ; J. L. Stallings, Auteur ; P. J.-M. Manus, Auteur Année de publication : 1997 Article en page(s) : p. 285-293 Note générale : Bibliogr. Langues : Anglais (eng) Tags : 'Peinture eau' Adjuvant Epaississant 'Propriété rhéologique' 'Composé hydrophobe' Uréthane Ethoxylate Sorption 'Vapeur d'eau' Neutralisation 'Base chimique' Index. décimale : 667.9 Revêtements et enduits Résumé : Thickeners and rheology modifiers (TRMs collectivity) are necessary ingredients in nearly all architectural and industrial water-borne coatings formulations. The majority of these coatings additives are organic polymers of either the associative or the non-associative variety depending on the primary mode of thickening. As such, they are film-formers to varying degrees and technically could be considered part of the binder system in a coating. When they are viewed in this capacity, they comprise a minor though important fraction of the total binder in a typical paint formulation.
Based on a recent survey of some 250 architectural interior and exterior coating formulas obtained from supplier literature, the average concentration of TRMs on an active weight basis was approximately 2,5% on latex binder solids. Though the amount is relatively small, most of these TRMs are inherently water soluble and considerably lower in molecular weight than the most latex binders, and because of this, these TRMs tend to impart some degree of water sensitivity to the coating formulations in which they are incorporated. Among the properties that may be affected are scrub resistance, wet adhesion, blister resistance and corrosion resistance.Note de contenu : - HEURASE TRMs
- Determining the moisture affinity of additives by water vapour sorption
- Hydrophilicity for HEURASE relative to other TRMs
- Effect of ionization and base volatility on WVS of HEURASE films
- Effect of base type on WVS
- WVS on paints containing HEURASE with different neutralizing bases
- HEURASE neutralizing bases in a low VOC coating formulation
- HEURASE neutralizing agents in low VOC paints
- HEURASE relative to commercial and cellulosic thickened paintsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17191
in SURFACE COATINGS INTERNATIONAL > Vol. 80, N° 6 (06/1997) . - p. 285-293[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 006583 - Périodique Bibliothèque principale Documentaires Disponible Relating laboratory and outdoor exposure of coatings : IV. Mode and mechanism for hydrolytic degradation / Tinh Nguyen in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 941 (06/2003)
[article]
Titre : Relating laboratory and outdoor exposure of coatings : IV. Mode and mechanism for hydrolytic degradation Type de document : texte imprimé Auteurs : Tinh Nguyen, Auteur ; Jon Martin, Auteur ; Eric Byrd, Auteur Année de publication : 2003 Article en page(s) : p. 37-50 Note générale : Bibliogr. Langues : Américain (ame) Tags : Essai vieillissement accéléré Feuil Humidité relative Mécanisme réaction Hydrolyse Sorption eau Dégradation chimique Acrylique dérivé polymère Mélamine résine Matériau revêtement Index. décimale : 667.9 Revêtements et enduits Résumé : Acrylic-melamine coatings are known to be susceptible to hydrolysis when exposed to water or humid environments. The mode and specific pathways for hydrolytic degradation of acrylic-melamine coatings exposed to water vapor in the absence of ultraviolet light are presented. Samples of a partially methylated melamine-acrylic coating applied to CaF2 substrates were subjected to five different relative humidity levels ranging from approximately 0 to 90% at 50°C. Coating degradation was measured with transmission Fourier transform infrared spectroscopy (FTIR) and tapping mode atomic force microscopy (AFM). In humid environments, partially methylated melamine-acrylic coatings undergo hydrolysis readily, causing considerable material loss and formation of mainly primary amines and carboxylic acids. The rate of hydrolysis increases with increasing RH. Hydrolytic degradation of acrylic-melamine coatings is an inhomogeneous process in which pits form, deepen, and enlarge with exposure. Such localized degradation mode suggests that hydrolysis of this material is an autocatalytic progression where acidic degradation products formed in the pits catalyze and accelerate the hydrolysis reactions. En ligne : http://www.fire.nist.gov/bfrlpubs/build03/PDF/b03054.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5580
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 75, N° 941 (06/2003) . - p. 37-50[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000566 - Périodique Bibliothèque principale Documentaires Disponible