Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
The versatility of ambient curing waterborne epoxy resin systems I / Adrian Thomas in SURFACE COATINGS INTERNATIONAL, Vol. 99.3 (06-07/2016)
[article]
Titre : The versatility of ambient curing waterborne epoxy resin systems I Type de document : texte imprimé Auteurs : Adrian Thomas, Auteur Année de publication : 2016 Article en page(s) : p. 181-189 Langues : Anglais (eng) Catégories : Epoxydes
Revêtements en phase aqueuse:Peinture en phase aqueuseIndex. décimale : 668.9 Polymères Résumé : From about the late 1940s onwards epoxy resin systems have been commercially marketed and since that time have been used in a wide variety of applications including : Coatings, civil engineering, adhesives, structural composites, electrical, tooling. Note de contenu : - FROM SOLVENTBORNE TO WATERBORNE EPOXY SYSTEMS
- CHEMISTRY OF EPOXY RESINS
- GENERATIONS OF AMBIENT CURING AQUEOUS EPOXY RESIN SYSTEMS : Type I ambient curing aqueous epoxy resin systems - Type II ambient curing aqueous epoxy resin systems - Type III ambient curing curing aqueous resin systems - Type IV ambient curing aqueous epoxy resin systems - Type V ambient curing aqueous epoxy resin systems
- ADVANTAGES AND DISADVANTAGES OF AMBIENT CURING AQUEOUS EPOXY RESIN SYSTEMS
- APPLICATIONS : Anticorrosion primers - Wall paints - Floor paintsEn ligne : https://drive.google.com/file/d/1Y7adZtD_66X4-lqZTw0RmUWsWKRsupR3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26724
in SURFACE COATINGS INTERNATIONAL > Vol. 99.3 (06-07/2016) . - p. 181-189[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18231 - Périodique Bibliothèque principale Documentaires Disponible The versatility of ambient curing waterborne epoxy resin systems II / Adrian Thomas in SURFACE COATINGS INTERNATIONAL, Vol. 99.4 (08-09/2016)
[article]
Titre : The versatility of ambient curing waterborne epoxy resin systems II Type de document : texte imprimé Auteurs : Adrian Thomas, Auteur Année de publication : 2016 Article en page(s) : p. 229-232 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Amines Une amine est un composé organique dérivé de l'ammoniac dont certains hydrogènes ont été remplacés par un groupement carboné. Si l'un des carbones liés à l'atome d'azote fait partie d'un groupement carbonyle, la molécule appartient à la famille des amides. Découvertes en 1849, par Wurtz les amines furent initialement appelées alcaloïdes artificiels.
On parle d'amine primaire, secondaire ou tertiaire selon que l'on a un, deux ou trois hydrogènes substitués.
Par exemple, la triméthylamine est une amine tertiaire, de formule N(CH3)3.
Typiquement, les amines sont obtenues par alkylation d'amines de rang inférieur. En alkylant l'ammoniac, on obtient des amines primaires, qui peuvent être alkylées en amines secondaires puis amines tertiaires. L'alkylation de ces dernières permet d'obtenir des sels d'ammonium quaternaire.
D'autre méthodes existent : 1. Les amines primaires peuvent être obtenues par réduction d'un groupement azoture, 2. Les amines peuvent aussi être obtenues par la réduction d'un amide, à l'aide d'un hydrure, 3. L'amination réductrice permet l'obtention d'amines substituées à partir de composés carbonylés (aldéhydes ou cétones), 4. Les amines primaires peuvent être obtenues par la réaction de Gabriel.
Epoxydes
Etalement spontané (revêtement)
Réticulation (polymérisation)
Revêtements en phase aqueuse -- Séchage:Peinture en phase aqueuse -- SéchageIndex. décimale : 667.9 Revêtements et enduits Résumé : Ever since the 1960s, two-pack amine-epoxy resin systems have been widely used in civil engineering applications such as formulations for concrete flooring, self-levelling flooring and grouts. Despite recent advances in this technology, there is a constant need for improvement in order to meet ever more stringent legislation and customer demands for better performance at lower cost. Note de contenu : - Benefits and limitations of waterborne epoxies
- The root cause of shrinkage on curing
- Molecular engineering design of an amine/epoxy adduct
- Fast cure and low shrinkage
- Physical and chemical properties summarised
- All-round performance benefits
- TABLES : 17. Self-levelling floor coating formulation using Incorez 148/700 - 18. Emission evaluation according to AgBB/DIBt of the self-levelling floor coating using Incorez 148/700 - 19. Physical properties of the cured self-levelling floor coating using Incorez 148/700 - 20. Chemical resistance and stain resistance of the cured self-levelling floor coating using Incorez 148/700En ligne : https://drive.google.com/file/d/1Wn_3vbixuN2nFA4zNIyc4d1a0hJo-mNp/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26946
in SURFACE COATINGS INTERNATIONAL > Vol. 99.4 (08-09/2016) . - p. 229-232[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18309 - Périodique Bibliothèque principale Documentaires Disponible Thermal analysis to improve yacht finish / Rico Ricotti in EUROPEAN COATINGS JOURNAL (ECJ), N° 12 (12/2015)
[article]
Titre : Thermal analysis to improve yacht finish : OSC is a powerful technique for analysing epoxy fillers and the curing process Type de document : texte imprimé Auteurs : Rico Ricotti, Auteur Année de publication : 2015 Article en page(s) : p. 44-48 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse thermique
Bateaux -- Revêtements:Bateaux -- Peinture
Calorimétrie
Charges (matériaux)
Epoxydes
Marines (peinture)
Réticulation (polymérisation)Index. décimale : 667.9 Revêtements et enduits Résumé : Surface defects in yacht coatings are often directly caused by improper filler cure. By using differential scanning calorimetry (DSC) to analyse the degree of crosslinking of the epoxy filler, the precise cause of any abnormal result can be pinpointed and action can be taken before applying the final coating layer. Note de contenu : - The importance of filler elasticity and temperature
- Using DSC to measure the degree of cure
- Undercatalysis of samples has less of an effect on Tg
- Higher application temperatures reduce process time
- Analyse filler cure to prevent coating defectsEn ligne : https://drive.google.com/file/d/14LEt0aTKUtnQSDl8E5wIhBs-Njrt8ttW/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=25057
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 12 (12/2015) . - p. 44-48[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17675 - Périodique Bibliothèque principale Documentaires Disponible Thermal characterization of solvent-free epoxy coatings by rheology and kinetics combined / Weih Q. Lee in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 1 (01/2020)
[article]
Titre : Thermal characterization of solvent-free epoxy coatings by rheology and kinetics combined Type de document : texte imprimé Auteurs : Weih Q. Lee, Auteur Année de publication : 2020 Article en page(s) : p. 145-155 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Analyse mécanique dynamique
Analyse thermique
Caractérisation
Epoxydes
Formulation (Génie chimique)
Gélification
Réticulation (polymérisation)
Revêtements organiques
Revêtements poudre:Peinture poudre
Rhéologie
Viscoélasticité
VitrificationIndex. décimale : 667.9 Revêtements et enduits Résumé : Rheology and kinetics are a pair of indispensable attributes in defining thermally reactive polymer coatings and paints. In this work, cure paths of volatile organic compound-free epoxy powder coatings, under heat, were characterized by viscoelastic and kinetic techniques. The essential rheological meanings of the gel point, the minimum complex viscosity, and the shear moduli from dynamic mechanical analysis curves were elucidated from applied formulation perspectives. Meanwhile, the maximum cure reaction rate and the peak temperature from differential scanning calorimetry exothermic profiles were quantitatively interpreted using primarily the extent of cure along with viscoelastic data. Vitrification and devitrification during cure were observed for high glass transition (Tg) epoxy formulations, unless a fast rate of heating was employed to a high enough temperature. Thorough and complete cure description provides strong insights for product development, allowing flow and cure properties to be balanced for optimal line performance. The consolidated approach is applicable to nearly all B-staged thermosetting systems of 100% solids including conditioned prepregs and a variety of adhesives per applications, as well as direct-to-metal primers or topcoats per functions. Note de contenu : - MATERIALS AND METHODS : DMA - DSC - Physicals
- RESULTS AND DISCUSSION : Generic Tg formulations - High Tg formulationsDOI : 10.1007/s11998-019-00248-9 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-019-00248-9.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33734
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 17, N° 1 (01/2020) . - p. 145-155[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21517 - Périodique Bibliothèque principale Documentaires Disponible Thermal, mechanical and dielectric properties of glass fiber reinforced epoxy-lanthanum manganite nanocomposites / Preseetha Paul Chiriyankandath in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 2 (2023)
[article]
Titre : Thermal, mechanical and dielectric properties of glass fiber reinforced epoxy-lanthanum manganite nanocomposites Type de document : texte imprimé Auteurs : Preseetha Paul Chiriyankandath, Auteur ; Soney Varghese, Auteur Année de publication : 2023 Article en page(s) : p. 183-189 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse thermique
Composés inorganiques -- Synthèse
Composites à fibres -- Propriétés mécaniques
Composites à fibres -- Propriétés thermiques
Composites à fibres de verre
Diélectriques
Epoxydes
Flexion (mécanique)
Manganite de lanthaneLe manganite de lanthane (LMO) est un composé chimique de formule LaMnO3. Il s'agit d'un solide cristallisé ayant une structure de pérovskite, de formule générique ABO3, dont les sites A sont occupés par des atomes de lanthane tandis que les sites B sont occupés par des atomes de manganèse, plus petits, l'ensemble donnant une structure formée d'octaèdres d'atomes d'oxygène avec un atome central de molybdène. La géométrie cubique de la pérovskite est distordue en géométrie orthorhombique sous l'effet d'une forte distorsion Jahn-Teller de l'octaèdre d'oxygène. Il s'agit d'un isolant électrique antiferromagnétique. Dans ce composé, les atomes de lanthane et de manganèse sont à l'état d'oxydation +3.
Le manganite de lanthane est le composé parent de plusieurs alliages importants, souvent appelés manganites de terres rares, ou oxydes à magnétorésistance colossale, parmi lesquels on compte le manganite de lanthane dopé au strontium La1−xSrxMnO3 et le manganite de lanthane substitué au calcium. La substitution de certains atomes de lanthane par du strontium ou du calcium introduit autant d'atomes de manganèse à l'état d'oxydation +4. Ce dopage induit divers effets électroniques, tels que la corrélation électronique, à l'origine de la grande variété de diagrammes de phases de ces alliages. (Wikipedia)
Mesure
PermittivitéLa permittivité, plus précisément permittivité diélectrique, est une propriété physique qui décrit la réponse d'un milieu donné à un champ électrique appliqué.
C'est une propriété macroscopique, essentielle de l'électrostatique, ainsi que de l‘électrodynamique des milieux continus. Elle intervient dans de nombreux domaines, notamment dans l’étude de la propagation des ondes électromagnétiques, et en particulier la lumière visible et les ondes utilisées en radiodiffusion.
On la retrouve donc en optique, via l'indice de réfraction. Les lois gérant la réfraction et la réflexion de la lumière y font appel.
Résistance au chocs
Silanes
Stabilité thermique
Traction (mécanique)Index. décimale : 668.4 Plastiques, vinyles Résumé : The mechanical, thermal and dielectric properties of lanthanum manganite (LaMnO3) epoxy nanocomposites reinforced with silane coated E-glass fiber are reported. Structural and morphological characteristics of the LaMnO3, synthesized by the solution combustion method, were studied via X-ray diffraction, EDAX and scanning electron microscopy. LaMnO3/epoxy composites containing various percentages of LaMnO3 (LME) were prepared via hand lay-up method and tested for tensile, flexural and impact strength. Improved properties were obtained with the addition of LME compared to plain epoxy composites. The thermal stability of the composites remains almost unaltered by the filler loading. Variation in the dielectric characteristics with filler loading is attributed to the percolation of charge carriers due to the interfacial zonal overlapping in the nanocomposite resulting in a change of the dielectric characteristics. Note de contenu : - EXPERIMENTAL : Materials - Synthesis of nano lanthanum manganite - Fabrication of composites - Measurements
- RESULTS AND DISCUSSION : Synthesis of lanthanum manganite - Thermal stability - DSC analysis - Mechanical properties - Dielectric characteristicsDOI : https://doi.org/10.1515/ipp-2022-0009 En ligne : https://drive.google.com/file/d/1J3X7w4HjELLJq64rqKhFAoh_VHAILCG3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39500
in INTERNATIONAL POLYMER PROCESSING > Vol. 38, N° 2 (2023) . - p. 183-189[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24121 - Périodique Bibliothèque principale Documentaires Disponible Thermal, microbial, and corrosion resistant metal-containing poly(Schiff) epoxy coatings / Tansir Ahamad in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 9, N° 5 (09/2012)
PermalinkThermoplastic composites production by room-temperature vacuum infusion / Franck Tison in JEC COMPOSITES MAGAZINE, N° 102 (01-02/2016)
PermalinkThermoplastic hybrid structures from planed aluminum and recycled high-performance fibers / Mir Mohammad Badrul Hasan in TECHNICAL TEXTILES, Vol. 66, N° 4 (2023)
PermalinkThermoset coatings engineered by nature / Simen Prang Folkner in EUROPEAN COATINGS JOURNAL (ECJ), (09/2023)
PermalinkThermosets for sustainable production of automotive composite components / Roman W. Hillermeier in JEC COMPOSITES MAGAZINE, N° 79 (03/2013)
PermalinkThick-walled filament-wound carbon fibre composite shaft in JEC COMPOSITES MAGAZINE, N° 81 (05-06/2013)
PermalinkPermalinkThree-body abrasive wear behavior of needle-punch nonwoven jute fiber reinforced epoxy composites / Vivek Mishra in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 3 (07/2014)
PermalinkThree-coat & epoxy mastic bridge coating systems in adverse environments / Saiada Fuadi Fancy in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 5 (05/2018)
PermalinkTiny particles that make a major impact / Stephan Sprenger in ADHESION - ADHESIVES + SEALANTS, N° 4/2008 (04/2008)
PermalinkUn toit ouvrant de cabriolet allégé et économique / Claus Dallner in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 909 (01-02/2014)
PermalinkTolérance aux dommages de perçages dans les assemblages boulonnés composites / Robert Piquet in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 24, N° 4 (10-11-12/2014)
PermalinkPermalinkTough enough to deal with the unexpected / Angela Smits in EUROPEAN COATINGS JOURNAL (ECJ), N° 9 (09/2012)
PermalinkToughening epoxy adhesives / Jay A. Johnston in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 7 (07/2013)
Permalink