Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Influence of titanium dioxide modified expandable graphite and ammonium polyphosphate on combustion behavior and physicomechanical properties of rigid polyurethane foam / X.-Y. Pang in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIII, N° 1 (03/2018)
[article]
Titre : Influence of titanium dioxide modified expandable graphite and ammonium polyphosphate on combustion behavior and physicomechanical properties of rigid polyurethane foam Type de document : texte imprimé Auteurs : X.-Y. Pang, Auteur ; W.-S. Chang, Auteur ; R. Chang ; M.-Q. Weng Année de publication : 2018 Article en page(s) : p. 117-126 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Combustion
Dioxyde de titane
Essais de comportement au feu
Graphite
Mousses plastiques
Mousses plastiques -- Propriétés mécaniques
Polyphosphate d'ammonium
Polyuréthanes
Résistance à la compression
Stabilité thermique
ThermogravimétrieIndex. décimale : 668.4 Plastiques, vinyles Résumé : In this research, the individual influence and synergistic behavior between titanium dioxide modified expendable graphite and ammonium polyphosphate on combustion behavior and physicomechanical properties of rigid polyurethane foam (RPUF) were investigated. Combustion behavior was evaluated by limiting oxygen index, and vertical-combustion tests. Thermal stability was studied via thermogravimetric/differential thermal gravimetric (TG/DTG) analysis. Results showed that the modified expendable graphite presented better thermal stability and flame retardancy for RPUF than the normal expandable graphite. Furthermore, the combination of the modified expendable graphite and ammonium polyphosphate with the mass ratio of 1 : 1 caused the RPUF to exhibit better flame retardancy, compression strength and high temperature thermal stability. Especially, the compression strength of this polymer composite sharply increased by 52.4 % over RPUF. Note de contenu : - EXPERIMENTAL PROCEDURE : Materials - Sample Preparation - Measurement and characterization of different properties
- RESULTS AND DISCUSSION : Characterizing graphite and prepared GICs - Influence of FRs on RPUFs propertiesDOI : 10.3139/217.3489 En ligne : https://drive.google.com/file/d/1ZeWNzCeg9DcDhfDDhQGiYuBzRVZL-_UQ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30193
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXIII, N° 1 (03/2018) . - p. 117-126[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19659 - Périodique Bibliothèque principale Documentaires Disponible Insedelf® : méthode quantitative de mesure de la séparation de phase dans un liquide / Yan Faure in L'ACTUALITE CHIMIQUE, N° 5 (05/2000)
[article]
Titre : Insedelf® : méthode quantitative de mesure de la séparation de phase dans un liquide : Application au cas des produits pétroliers Type de document : texte imprimé Auteurs : Yan Faure, Auteur ; Guy Dessalces, Auteur ; Pierre Claudy, Auteur ; Franck Eydoux, Auteur ; Philippe Schulz, Auteur Année de publication : 2000 Article en page(s) : p. 3-9 Note générale : Bibliogr. Langues : Français (fre) Catégories : Analyse quantitative (chimie)
Emulsions
Hydrocarbures
Séparation (technologie)
ThermogravimétrieIndex. décimale : 540 Chimie et sciences connexes Résumé : Cette étude décrit une nouvelle méthode pour effectuer des mesures quantitatives de séparation de phase d'un liquide initialement homogène, en deux ou plusieurs phases, en changeant sa température. Actuellement, elle est employée sur des produits pétroliers pour mesurer la sédimentation des paraffines dans des hydrocarbures, l'efficacité d'additifs antisédimentation ainsi que la stabilité d'émulsions eau-gazole de type "Aquazole®". De nombreuses autres applications pourraient être envisagées, par exemple dans le secteur de la pharmacie, de la cosmétique ou de l'agroalimentaire. En ligne : https://www.lactualitechimique.org/Insedelf-R-methode-quantitative-de-mesure-de- [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=7052
in L'ACTUALITE CHIMIQUE > N° 5 (05/2000) . - p. 3-9[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 002160 - Périodique Bibliothèque principale Documentaires Disponible Intumescent coatings : truly functional coatings that save lives latest developments / Christophe Baude in DOUBLE LIAISON, N° 614 (12/2016)
[article]
Titre : Intumescent coatings : truly functional coatings that save lives latest developments Type de document : texte imprimé Auteurs : Christophe Baude, Auteur ; Maurille Secher, Auteur ; Cécile Fonteneau, Auteur ; Alan Fream, Auteur ; Jean-Marie Schmuck, Auteur Année de publication : 2016 Article en page(s) : p. 14-18 Langues : Anglais (eng) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Couches minces
Essais accélérés (technologie)
Formulation (Génie chimique)
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Incendies -- Prévention
Intumescence (chimie)
Liants
Métaux -- Revêtements protecteurs
Revêtements en phase aqueuse -- Additifs:Peinture en phase aqueuse -- Additifs
ThermogravimétrieIndex. décimale : 667.6 Peintures Résumé : In recent years, thin film intumescent coatings have become the preferred choice for the protection of structural steel, and have enjoyed significant growth on a global basis, because of their ability to provide cost-effective passive fire protection to structural steel, whilst at the same time maintaining the aesthetic qualities on the steel, which is being demanded by more and more architects and engineers. Note de contenu : - INTUMESCENT COATINGS : WHAT ARE THEY ? HOW DO THEY WORK
- THE IMPORTANCE OF THE RESIN BINDER IN INTUMESCENCE : European standards for fire protection coatings
- CURRENT BINDER TECHNOLOGY FOR WATERBORNE INTUMESCENT COATINGS
- DESIGN OF A NEW BINDER FOR WATERBORNE COATINGS
- NEW BINDER FOR WATERBORNE INTUMESCENT COATINGS
- EXPERIMENTAL : Testing protocol for evaluation of new binder
- FORMULATION APPROACH FOR NEW WATERBORNE BINDER : Water soak resistance - W conditions exposure - Y conditions exposure
- FIGURES : 1. Thermal gravimetric analysis (TGA) curves of new waterborne binder vs. best-in-class solventborne binder - 2. Thermal gravimetric analysis (TGA) curves of new waterborne binder vs. best-in-class solventborne binder - 3. Effect of accelerated aging (W conditions) on dry films - 4. Time/temperature curves for WB IC 02 vs VA/VV binder, before, and after accelerated exposure (Y conditions)
- TABLES : 1. Use categories as defined in EN 16623 - 2. Recipe structure waterbased intumescent formulationPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27442
in DOUBLE LIAISON > N° 614 (12/2016) . - p. 14-18[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 18579 - Périodique Bibliothèque principale Documentaires Disponible 18634 - Périodique Bibliothèque principale Documentaires Disponible Investigation of the interaction between epoxides and collagen in epoxy tanning based on BDDGE cross-linked collagen solution / Yuanzhi Zhang in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 8 (08/2020)
[article]
Titre : Investigation of the interaction between epoxides and collagen in epoxy tanning based on BDDGE cross-linked collagen solution Type de document : texte imprimé Auteurs : Yuanzhi Zhang, Auteur ; Li Guoying, Auteur Année de publication : 2020 Article en page(s) : p. 279-287 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Analyse thermique
Collagène
Dodécyl sulfate de sodiumLe laurylsulfate de sodium (LSS) ou dodécylsulfate de sodium (SDS) est un détergent et tensioactif ionique fort, couramment utilisé en biochimie et biologie moléculaire.
C'est un composé à ne pas confondre avec le laureth sulfate de sodium.
La concentration micellaire critique du SDS varie de 0,007 à 0,01 mol/L dans l'eau à 25°C.
Le dodécylsulfate de sodium (en anglais, Sodium Dodecyl Sulfate ou SDS ou/ NaDS), de formule C12H25NaO4S, aussi connu sous le nom de laurylsulfate de sodium (en anglais, sodium lauryl sulfate ou SLS), est un tensioactif ionique qui est utilisé dans les produits ménagers tels que les dentifrices, shampooings, mousses à raser ou encore bains moussants pour ses effets épaississants et sa capacité à créer une mousse, il est également repris comme additif alimentaire par le codex alimentarius (E487).
La molécule est composée d’une chaîne de 12 atomes de carbone, rattachée à un groupement sulfate conférant à la molécule les propriétés amphiphiles requises pour un détergent. Le SDS est préparé par sulfonation du dodécanol (alcool de lauryl, C12H25OH), suivie par une neutralisation par du carbonate de sodium. Le SDS est utilisé aussi bien dans les procédés industriels que pour les produits cosmétiques destinés au grand public.
Dynamique moléculaire
Epoxydes
Extraction (chimie)
Fourier, Spectroscopie infrarouge à transformée de
Microscopie à force atomique
Rhéologie
Stabilité thermique
Tannage organique
ThermogravimétrieIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : To investigate further the interaction between epoxides and collagen in epoxy tanning, collagen solutions (3 mg/ml) cross-linked with various concentrations (0.5–4-wt%) of 1,4-butanediol diglycidyl ether (BDDGE) at low temperature (4ºC), alkaline conditions (pH = 10) were prepared. The sodium dodecyl sulfate–polyacrylamide gel electrophoresis and Fourier transform infrared spectroscopy confirmed the intact triple-helix structure of the cross-linked collagen. With the increasing concentration of BDDGE, the denaturation temperature measured using VP-DSC increased from 42.56 ºC to 44.25ºC and thermogravimetric analysis showed that the decomposition temperature increased from 333.0ºC to 351.8ºC. In addition, the rheology properties such as G¢, G² and η* were measured with a rotary rheometer using dynamic frequency scanning. The trinitrobenzensulfonic acid method and atomic force microscopy were used to investigate the interaction between collagen and BDDGE. The results indicated that the changes in cross-linked collagen performance were attributed to the transition of collagen aggregation caused by cross-linking. In addition, the transition point of 2-wt% BDDGE was the key node for the formation of a mature cross-linked network and the cross-linking barely increased above that. It is hoped that these findings deepen the understanding of epoxy tanning and provide guidance for the practical use of epoxides in tanning and biomaterials. Note de contenu : - MATERIALS AND METHODS : Extraction of the bovine skin collagen - Preparation of the cross-linked collagen solutions - Sodium dodecyl sulfate-polyacrylamide gel electrophoresis - Fourier Transform Infrared (FTIR) spectra - VP-DSC - TG measurements - Dynamic rheological measurements - Determination of the reacted amino group content - Atomic force microscopy
- RESULTS : The integrity of cross-linked collagen - Thermal stability - Rheological properties - The content of reacted amino groups - Atomic force microscope imagesDOI : https://doi.org/10.34314/jalca.v115i8.3843 En ligne : https://drive.google.com/file/d/1q2Gv1tbaFa87ldb6ZUfosbdXuFLwypvh/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34434
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXV, N° 8 (08/2020) . - p. 279-287[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22195 - Périodique Bibliothèque principale Documentaires Disponible Investigation on mechanical, thermal and water absorption properties of banana/coir reinforced polypropylene hybrid composites / Bujjibabu Gunturu in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 30, N° 3-4 (08/2020)
[article]
Titre : Investigation on mechanical, thermal and water absorption properties of banana/coir reinforced polypropylene hybrid composites Type de document : texte imprimé Auteurs : Bujjibabu Gunturu, Auteur ; Chittaranjandas Vemulapalli, Auteur ; Ramakrishna Malkapuram, Auteur ; Nagarjuna Konduru, Auteur Année de publication : 2020 Article en page(s) : p. 123-131 Note générale : Bibliogr. Langues : Français (fre) Catégories : Composites à fibres végétales -- Propriétés mécaniques
Composites à fibres végétales -- Propriétés thermiques
Diffractométrie de rayons X
Fibres de banane
Fibres de coco
Flexion (mécanique)
Fourier, Spectroscopie infrarouge à transformée de
Humidité -- Absorption:Eau -- Absorption
Polypropylène
Résistance au chocs
Thermogravimétrie
Traction (mécanique)Index. décimale : 668.4 Plastiques, vinyles Résumé : This study explores the merits of B/C fibers reinforced polypropylene to developed high mechanical performance, cost effective and light weight hybrid composite. B/C fibers reinforced polypropylene hybrid composites were prepared with different proportions. Variation in Banana, Coir and B/C fibers in hybrid composites, reveal the tensile, flexural, impact strength and water absorption. The PP and Banana, Coir fibers reinforced Composites were prepared by the twin screw extrusion of PP 80% with B-20, C-20 and B/C 15/5, 10/10 and 5/15 wt%. After extrusion, the extraction strands cut into pallets and injection molded machine make the test specimens. It was found that maximum tensile strength, the flexural strength and the impact strength at 20% of banana fiber. Tensile, flexural and impact strengths marginally have been decreased when decrease the banana fiber in the B/C fiber reinforced polypropylene hybrid composites. Also observed water absorption of same composites for 24 hrs., 48 hrs. and 72 hrs. Thermogravimetry analysis (TGA), fourier transform infrared spectroscopy (FTIR) and XRD (X ray diffraction) was examined. Note de contenu : - MATERIALS AND METHODS : Materials - Manufacturing of composites - Mechanical testing - Water absorption - Thermal properties - FTIR - XRD (X-ray diffraction)
- RESULTS AND DISCUSSION : Tensile properties - Flexural properties - Impact strength - Water absorption - TGA &DTG - FTIR - XRD analysis
- Table 1 : Mechanical properties of B/C reinforced polypropylene hybrid composites
- Table 2 : Percentage of water absorption of B/C fiber reinforced polypropylene hybrid composite
- Table 3 : Functional groups of hybrid compositesDOI : https://doi.org/10.18280/rcma.303-402 En ligne : https://www.iieta.org/download/file/fid/39662 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37638
in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES > Vol. 30, N° 3-4 (08/2020) . - p. 123-131[article]Isocyanurate-containing urethane adhesive with improved heat stability / C. L. Wang in ADHESIVES AGE, Vol. 37, N° 13 (12/1994)
PermalinkKinetics and mechanism of thermal degradation of vegetable-tanned leather fiber / Jie Liu in JOURNAL OF LEATHER SCIENCE AND ENGINEERING, Vol. 1 (Année 2019)
PermalinkLignin based colorant : modified black liquor for leather surface coating application / P. Balasubramanian in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIII, N° 10 (10/2018)
PermalinkLLDPE/proton exchanged layered niobate K4Nb6O17 nanocomposites / H. Otaguro in INTERNATIONAL POLYMER PROCESSING, Vol. XXVII, N° 4 (08/2012)
PermalinkMechanical and thermal properties of teak wood flour/starch filled high density polyethylene composites / Kishor Biswas in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 2 (05/2019)
PermalinkMechanical, curing parameters and water absorption of hybrid date palm leaf-orange peel fibers reinforced unsaturated polyester composites / Hamza Chelali in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 31, N° 3 (06/2021)
PermalinkMelamine fiber-synthesis, features and applications / Subhankar Maity in CHEMICAL FIBERS INTERNATIONAL, (10/2013)
PermalinkMelt-spun elastic yarns - a game changer on the elastane market / Jan Thiel in CHEMICAL FIBERS INTERNATIONAL, Vol. 71, N° 3 (09/2021)
PermalinkMelt-spun elastic yarns - a game changer on the elastane market / Jan Thiel in CHEMICAL FIBERS INTERNATIONAL, (10/2021)
PermalinkModélisation des propriétés viscoélastiques linéaires d’amidon de pomme de terre amorphe en fonction de la température et la teneur en eau / Magdalena Kristiawan in RHEOLOGIE, Vol. 26 (12/2014)
PermalinkModelling the solubility of films prepared from collagen hydrolysate / Pavel Mokrejs in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 94, N° 6 (11-12/2010)
PermalinkMolecular interactions between type I collagen and metal complex : from computational modelling to experimental characterisation / Xiao Shiwei in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 102, N° 4 (07-08/2018)
PermalinkMorphological and thermal properties of polystyrene/poly(vinyl chloride) blends / Nassira Tourta in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 23, N° 4 (08/2022)
PermalinkMorphology and thermal behavior of TPU/PP blends modified with maleic anhydride grafted SEBS-g-MA block copolymer / Vesna Ocelic Bulatovic in INTERNATIONAL POLYMER PROCESSING, Vol. XXXII, N° 1 (03/2017)
PermalinkMultifunctional carbon nanofiber systems mass produced from water soluble polymers / Lee D. Cremar in CHEMICAL FIBERS INTERNATIONAL, Vol. 66, N° 1 (03/2016)
Permalink