Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Icecold to higher quality and productivity / Steve Wilson in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 11 (11/2016)
[article]
Titre : Icecold to higher quality and productivity : Tool and mold cleaning with dry ice Type de document : texte imprimé Auteurs : Steve Wilson, Auteur Année de publication : 2016 Article en page(s) : p. 43-45 Langues : Anglais (eng) Catégories : Glace sèche
Matières plastiques -- Appareils et matériel
Moules d'injection
Nettoyage à sec
OutillageIndex. décimale : 668.4 Plastiques, vinyles Résumé : Cleaning - Operating technology - Tool and mold cleaning is a quality and cost critical production step in the plastics industry. Dry ice enables effective yet gentle cleaning of fine cavities without disassembling or removal of the tools. Note de contenu : - Dry and residue-free cleaning
- Choosing the right dry ice cleaning-system
- Applications in the plastic processing industryEn ligne : https://drive.google.com/file/d/1s8ERQDVk0tb6DiL-B_00Zf1EltcqRdd-/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27518
in KUNSTSTOFFE INTERNATIONAL > Vol. 106, N° 11 (11/2016) . - p. 43-45[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18493 - Périodique Bibliothèque principale Documentaires Disponible Impressive experience / Rolf-Uwe Müller in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 10 (10/2013)
[article]
Titre : Impressive experience Type de document : texte imprimé Auteurs : Rolf-Uwe Müller, Auteur Année de publication : 2013 Article en page(s) : p. 109-111 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Diodes électroluminescentes
Machines hydrauliques
Matières plastiques -- Moulage par compression
Moules d'injectionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Process design. Controversial discussions are heard time and again as to which mold type – hydraulic or spring-loaded cavity frame – should be used in a particular case for injection compression molding with the main machine axis. It is well worthwhile in all cases to focus the arguments on the product and the process technology. Note de contenu : - Limited compression stroke, temperature-controlled hydraulic cylinders
- Hydraulics versus spring systems
- Required machine configurationPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20276
in KUNSTSTOFFE INTERNATIONAL > Vol. 103, N° 10 (10/2013) . - p. 109-111[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15617 - Périodique Bibliothèque principale Documentaires Disponible In between industry 4.0 and market intelligence / Wolfgang Boos in KUNSTSTOFFE INTERNATIONAL, Vol. 108, N° 10 (10/2018)
[article]
Titre : In between industry 4.0 and market intelligence : Compare, Compile, Conduct – Further strategic development in the tool and die industry Type de document : texte imprimé Auteurs : Wolfgang Boos, Auteur ; Christoph Kelzenberg, Auteur ; Jan Wiese, Auteur ; Jens Helbig, Auteur Année de publication : 2018 Article en page(s) : p. 19-23 Langues : Anglais (eng) Catégories : Analyse stratégique
Études de marché
Matières plastiques -- Industrie et commerce
Moules d'injection
Outillage
Planification stratégiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : The producing industry is increasingly involved in changes due to progressing globalization and derivatization, shorter product lifetimes, and demographic change – with enormous consequences for mold making as well. This is why mold making companies have to continue further development. In actual practice, a so-called 3C approach to "compare, compile, and conduct" has proven effective. Note de contenu : - Changed market conditions for the tool and die industry
- Industrialization, market intelligence, and digital networking
- The necessity for systematic strategy development
- Benchmarking interpretation enables goal-setting
- Figure : Further strategic development is more important than ever for technologically motivated machine tool operations
- Fig. 1 : Opportunities and risks for the tool and die industry due to changed market conditions till 2025
- Fig. 2 : The 3C approach consists of the steps "compare", "compile", and "conduct"
- Fig 3 : Compare : this except from a benchmarking - based on a data bank with more than 1000 data sets of German tool and die manufacturers - is an example of an indicator-based comparison of companies
- Fig. 4 : Compile : as a consequence of benchmarking, concrete fields of action can be derived for the company's operation
- Fig. 5 : Conduct : an optimized planning systematic can shorten lead-in times and increase transparency and productivity in production. This could be concluded from the example of the measures derived herePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31434
in KUNSTSTOFFE INTERNATIONAL > Vol. 108, N° 10 (10/2018) . - p. 19-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20275 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : In-house moldmaking : Patented casting resin system for producing sophisticated thermoforming molds in just a few hours Type de document : texte imprimé Auteurs : Nadin Dirkmorfeld, Auteur ; Manuel Jäger, Auteur Année de publication : 2020 Article en page(s) : p. 42-45 Langues : Anglais (eng) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Epoxydes
Matières plastiques -- Thermoformage
Moules d'injection
Polyuréthanes
Procédés de fabrication
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 668.4 Plastiques, vinyles Résumé : Compared with conventional thermoforming molds made from epoxy resins or aluminum, a new type of casting resin system not only enables heat-resistant and high-quality thermoforming molds to be produced in a much shorter time, but the user can make the molds himself. The system can also serve as an alternative to injection molding to achieve a favorable price-performance ratio. Note de contenu : - Synthetic resin versus aluminum
- Comparison with aluminum molds
- Thermoforming or injection molding ?
- Preparing for pattern casting
- Working steps for casting the model
- Thermoforming with and without machine
- Fields of application
- Figure : Easy to process : using the patented Mould D casting resin system, companies can produce their own thermoforming molds
- Fig. 1 : Comparison of materials : Mould D is quick to process and a match for aluminum in terms of quality
- Fig. 2 : Saving on drilled vacuum holes: where a vacuum is to be applied in the thermoforming mold later, silicone-sheathed steel wires used during pattern preparation keep the cavities open during casting
- Fig. 3 : Cross-section of a thermoforming mold made from Mould D : the copper pipes provide temperature control and the perforated aluminum sheet is used to reinforce the mold
- Fig. 4 : An approx. 2500 kg, high-quality thermoforming boat-mold that can be molded perfectly, even at the edges
- Fig. 5 : Cost-efficient relative to injection molding : thermoformed part for a measuring instru-ment for airborne and waterborne pollutants: produced by KVH Hartung GmbH, Krailing, Germany, using vacuum thermoforming with a negative mold
- Table 1 : Shrinkage-free casting of mould D
- Table 2 : Technical data of mould DEn ligne : https://drive.google.com/file/d/1FHaEbFZrMD-Thekc8hYi7tTOYR5wxICi/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34075
in KUNSTSTOFFE INTERNATIONAL > Vol. 110, N° 3 (2020) . - p. 42-45[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21649 - Périodique Bibliothèque principale Documentaires Disponible Influence of mold cavity thickness on electrical, morphological and thermal properties of polypropylene/carbon micromoldings / Shengtai Zhou in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 2 (2023)
[article]
Titre : Influence of mold cavity thickness on electrical, morphological and thermal properties of polypropylene/carbon micromoldings Type de document : texte imprimé Auteurs : Shengtai Zhou, Auteur ; Renze Jiang, Auteur ; Xue Lei, Auteur ; Huawei Zou, Auteur ; Andrew N. Hrymak, Auteur Année de publication : 2023 Article en page(s) : p. 214-224 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Composites -- Moulage par micro-injection
Composites -- Propriétés électriques
Composites -- Propriétés thermiques
Conduction électrique
Etudes comparatives
Matériaux -- Epaisseur
Micropièces
Moules d'injection
Nanotubes
Noir de carbone
PolypropylèneIndex. décimale : 668.4 Plastiques, vinyles Résumé : In this work, a comparative study on the electrical conductivity (σ) and thermal properties of polypropylene (PP)/carbon microparts with different part thickness (namely, 0.85 and 0.50 mm) is reported. Two different types of carbon filler (i.e., CNT and CB) were adopted to study the efficacy of different carbon fillers in improving the σ of PP/carbon microparts. In general, the σ of 0.85 mm thickness microparts were higher than the 0.50 mm thickness microparts, regardless of the carbon filler type and testing directions. This suggested that higher shearing conditions that prevailed in the microinjection molding (μIM) process were unfavorable for the formation of intact conductive pathways in corresponding moldings, albeit the distribution of carbon fillers turned better with increasing shear rates, as confirmed by morphology observations. Differential scanning calorimetry results showed that prior thermomechanical histories (including melt blending and μIM) experienced by the polymer melts had an influence on the thermal behavior of subsequent moldings. Also, there existed a strong shear flow-induced crystallization of polymer chains during μIM because the crystallinity of microparts was higher than that of feed materials. Note de contenu : - EXPERIMENTAL SECTION : Materials - Preparation of samples
- CHARACTERIZATION : Electrical conductivity - Simulation - Morphology - Differential scanning calorimetry
- RESULTS AND DISCUSSION : Electrical conductivity and simulation - Morphology - Melting and crystallization behavior
- Table 1 : Characteristic data from DSC scans for PP/CB and PP/CNT microparts and their corresponding blends for Cycle 1 (1st heating cycle), Cycle 2 (cooling cycle), and Cycle 3 (2nd heating cycle)DOI : https://doi.org/10.1515/ipp-2022-4288 En ligne : https://drive.google.com/file/d/1-gV9hbAsnQdBcZoU1O_GQD2XlRxDejjp/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39502
in INTERNATIONAL POLYMER PROCESSING > Vol. 38, N° 2 (2023) . - p. 214-224[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24121 - Périodique Bibliothèque principale Documentaires Disponible Influence of mold temperature on mold filling behavior and part properties in micro injection molding / S. Meister in INTERNATIONAL POLYMER PROCESSING, Vol. XXVIII, N° 5 (11/2013)
PermalinkA knowledge management system for injection molds / Maximilian Hirner in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 7 (07/2012)
PermalinkLaser-based dynamic mold temperature control in KUNSTSTOFFE INTERNATIONAL, Vol. 105, N° 1-2 (01-02/2015)
PermalinkPermalinkLet off some air ! / Rudolf Hein in KUNSTSTOFFE INTERNATIONAL, Vol. 101, N° 11 (11/2011)
PermalinkLeveraging hidden potential / Florian Raschke in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 11 (11/2012)
PermalinkLimitations of simple flow models for the simulation of nanoimprint / H. Teyssèdre in INTERNATIONAL POLYMER PROCESSING, Vol. XXVIII, N° 1 (03/2013)
PermalinkLosing pounds and cutting costs with injection compression molding / Serkan Fidan in KUNSTSTOFFE INTERNATIONAL, Vol. 106, N° 11 (11/2016)
PermalinkMaintenance during (nearly) uninterrupted production : Pipette tips / Sabine Kob in KUNSTSTOFFE INTERNATIONAL, Vol. 111, N° 3 (2021)
PermalinkMass production in medical technology demands top precision in tiny details / Uwe Becker in KUNSTSTOFFE INTERNATIONAL, Vol. 105, N° 11 (11/2015)
PermalinkMold makers are raising their game / Nicolai Lammert in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 11 (11/2014)
PermalinkMold platforms for IVD consumables / Guido Radig in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 2 (2021)
PermalinkLe moule accélère l'assemblage / Alexandre Couto in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 902 (04-05/2013)
PermalinkMoules de grande taille, les atouts français / Audrey Loubens in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 888 (10/2011)
PermalinkMulti-layer counter-pressure injection molding for thick-walled optical lens / Y. Liu in INTERNATIONAL POLYMER PROCESSING, Vol. 36, N° 2 (2021)
Permalink