Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : Fire retardant coatings Type de document : texte imprimé Auteurs : Anuja Chatterjee, Auteur Année de publication : 2018 Article en page(s) : p. 67-78 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Epoxydes
Hydroxydes doubles lamellaires
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Nanoparticules
Nanotubes
Phosphore
Polymères -- Additifs
Revêtements protecteurs
Silicium
Silsesquioxanes oligomères polyhèdres
ThermodurcissablesIndex. décimale : 667.9 Revêtements et enduits Résumé : This paper focuses on current trends in the flame retardancy of epoxy-based thermosets. This review examines the incorporation of additives in these polymers, including synergism effects. Reactive flame-retardants—which are incorporated in the polymer backbone—are reported and the use of fire-retardant epoxy coatings for materials protection is also considered. And also explains fire retardant mechanism of nanofiller to develop more efficient fire-retardant nano composites. Actually nanofillers are carbon nanotubes and clay which are attractive materials because addition of small amount of nanofillers can improve mechanical, thermal, electrical properties of plastics without changing the processability. However nanofillers themselves do not show excellent fire retardancy, Nanofilers should combine with other fire retardants. Some combination shows positive synergy and some case shows negative synergy effect. Then effective combination of nanofillers and conventional fire retardants are discussed in this article. Note de contenu : - INCORPORATION OF ADDITIVES : Epoxy and nanoparticle - Organoclays - Layered double hydroxides - Polyhedral oligomeric silsesquioxanes - Carbon nanotubes
- REACTIVE FLAME RETARDANTS : Phosphorus-containing networks - Silicon-containing networks
- COATINGSEn ligne : https://drive.google.com/file/d/1GYhct4xlEDVXp9xEKK5JrEyrXGjRr4np/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31934
in PAINTINDIA > Vol. LXVIII, N° 12 (12/2018) . - p. 67-78[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20674 - Périodique Bibliothèque principale Documentaires Disponible Fireosaurus rex : king of epoxy PFP in hot and cold climates / Mike O'Donoghue in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 8 (08/2018)
[article]
Titre : Fireosaurus rex : king of epoxy PFP in hot and cold climates Type de document : texte imprimé Auteurs : Mike O'Donoghue, Auteur ; Vijay Datta, Auteur ; Ravi Nagarajan, Auteur ; Bill Dempster, Auteur ; Robin Wade, Auteur ; Sherman Spear, Auteur Année de publication : 2018 Article en page(s) : p. 20-30 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Epoxydes
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
Polyamines
Polysulfures
Protection passive contre l'incendiela protection passive contre l’incendie dans les bâtiments est essentiellement préventive. Elle représente l’ensemble des mesures constructives permettant à un ouvrage ou une partie d’ouvrage de résister à un incendie pendant un temps prédéterminé fixé par la réglementation de construction en vigueur pour le type de bâtiment concerné. Ces mesures sont destinées à : stopper la progression des fumées, éviter la propagation des flammes, maintenir la stabilité au feu des éléments de structure le plus longtemps possible malgré l’action d’un incendie, contenir les effets thermiques le plus longtemps possible à la zone sinistrée.
La principale spécificité de la protection passive est que dès le début d’un incendie, elle fonctionne sans aucune intervention humaine ni aucun apport extérieur d’énergie.
C’est une protection durable, l’efficacité de la plupart des produits utilisés dans la protection passive n’étant pas limitée dans le temps.
Les principaux moyens de la protection passive sont : Pour les structures, le flocage, l’encoffrement, les peintures ou enduits intumescents… Pour le compartimentage, les parois, les portes coupe-feu, les calfeutrements coupe-feu de pénétration de câbles et de tuyaux, les cheminements techniques protégés...
Revêtements protecteursIndex. décimale : 667.9 Revêtements et enduits Résumé : Even though flexible and rigid intumescent-epoxy-PFP systems may yield considerably different flexibility data, the overall formulation technology and multiple intrinsic and extrinsic stress-strain factors determine whether or not epoxy PFPs crack in cold environments.
It is important to choose a fireproofing system that fulfills the requirements for application to steel in shop and field environments during fabrication and construction phases - a fireproofing system that can be practically and economically maintained during the life of the asset.
Fireosaurus Rex is by no means extinct !Note de contenu : - Cold climates: intumescent epoxy-amine PFP
- Cold climates: novel intumescent epoxy-polysulfide PFP
- Shop application and productivity
- Challenges and controversy with colde climates
- Cold climate case history #1 - Epoxy-Amine PFP
- Cold climate Case history #2 - Novel Epoxy-Polysulfide PFP
- Warm climate Case history #3 - Novel Epoxy-Polysulfide PFP
- Fig. 1 : Schematic cure process for two-component epoxy coatings
- Fig. 2 : The epoxy-amine reaction
- Fig. 3 : The polysulfide-thiol-amine reaction
- Fig. 4 : Example of strain development as a function of temperature for epoxy-amine PFP
- Fig. 5 : Example of strain development as a function of temperature for epoxy-amine PFP
- Fig. 6 : Strain development compared to material strain capacity for epoxy-polysulfide PFP
- Fig. 7 : Annual temperature profile kazakh steppe in 2017
- Fig. 8 : Clip-on mesh on flange tips
- Fig. 9 : Epoxy-polysulfide PFP applied to structural steel
- Table 1 : Comparison of epoxy-polysulfide (PFPs)
- Table 2 : The basics of a novel-epoxy-polysulfide PFPPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31856
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 35, N° 8 (08/2018) . - p. 20-30[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20134 - Périodique Bibliothèque principale Documentaires Disponible Flame retardancy and smoke suppression properties of transparent intumescent fire-retardant coatings reinforced with layered double hydroxides / Zhisheng Xu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 1 (01/2020)
[article]
Titre : Flame retardancy and smoke suppression properties of transparent intumescent fire-retardant coatings reinforced with layered double hydroxides Type de document : texte imprimé Auteurs : Zhisheng Xu, Auteur ; Nan Deng, Auteur ; Long Yan, Auteur Année de publication : 2020 Article en page(s) : p. 157-169 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Anti-fumée
Caractérisation
Essais (technologie)
Hydroxydes doubles lamellaires
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
Mesure
Protection passive contre l'incendiela protection passive contre l’incendie dans les bâtiments est essentiellement préventive. Elle représente l’ensemble des mesures constructives permettant à un ouvrage ou une partie d’ouvrage de résister à un incendie pendant un temps prédéterminé fixé par la réglementation de construction en vigueur pour le type de bâtiment concerné. Ces mesures sont destinées à : stopper la progression des fumées, éviter la propagation des flammes, maintenir la stabilité au feu des éléments de structure le plus longtemps possible malgré l’action d’un incendie, contenir les effets thermiques le plus longtemps possible à la zone sinistrée.
La principale spécificité de la protection passive est que dès le début d’un incendie, elle fonctionne sans aucune intervention humaine ni aucun apport extérieur d’énergie.
C’est une protection durable, l’efficacité de la plupart des produits utilisés dans la protection passive n’étant pas limitée dans le temps.
Les principaux moyens de la protection passive sont : Pour les structures, le flocage, l’encoffrement, les peintures ou enduits intumescents… Pour le compartimentage, les parois, les portes coupe-feu, les calfeutrements coupe-feu de pénétration de câbles et de tuyaux, les cheminements techniques protégés...
Revêtements protecteurs
Stabilité thermique
Transparence (optique)Index. décimale : 667.9 Revêtements et enduits Résumé : A series of novel layered double hydroxide (LDH)-modified phosphate esters (LPPBs) flame retardants were synthesized by the reaction of flexible phosphate ester (PPB) and LDHs with different mass ratio and then well characterized by Fourier transform infrared spectroscopy (FTIR) and 1H nuclear magnetic resonance spectroscopy (1H NMR). The obtained LPPBs were mixed with melamine formaldehyde resin to produce transparent fire-retardant coatings applied on wood substrates. The coatings containing LDHs exhibit a high degree of transparency even at high LDH contents due to the well dispersed and completely exfoliated state of LDHs in the amino matrix, as determined from the results of X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) images. The fire protection tests show that the values of weight loss, char index, and flame spread rating of the coatings are remarkably decreased with the introduction of LDHs concomitant with an increase in the intumescent factor. The cone calorimeter and smoke density tests show that the flame retardancy and smoke suppression properties of the coatings are significantly improved with the introduction of LDHs due to the formation of a more compact, continuous, and intumescent char during combustion. The results of thermogravimetric (TG) analysis show that the thermal stability and residual weight of the coatings are gradually increased with increasing LDH content. Char residue analysis shows that the introduction of LDHs into the coatings contributes to generating more phosphorus-rich crosslinking structures and aromatic structures in the condensed phase that produce a more compact and thermally stable char against the release of heat and smoke, thus exhibiting excellent flame retardancy and smoke suppression properties. Note de contenu : - EXPERIMENTAL : Material - Synthesis of PPB and LPPBs - Preparation of transparent fire-retardant coatings - Measurements and characterization
- RESULTS AND DISCUSSION : Characterization of PPB and the LPPBs - Transparency analysis - Fire protection tests - Cone calorimeter test - Smoke density test - Thermal stability analysis - Char residue analysisDOI : 10.1007/s11998-019-00249-8 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-019-00249-8.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33735
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 17, N° 1 (01/2020) . - p. 157-169[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21517 - Périodique Bibliothèque principale Documentaires Disponible Flame retardancy of acrylic emulsion resin intumescent coatings added with alkaline lignin on plywood / Chih-Shen Chuang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 21, N° 2 (03/2024)
[article]
Titre : Flame retardancy of acrylic emulsion resin intumescent coatings added with alkaline lignin on plywood Type de document : texte imprimé Auteurs : Chih-Shen Chuang, Auteur ; Po-Heng Lin, Auteur ; Cheng-Jung Lin, Auteur Année de publication : 2024 Article en page(s) : p. 611-622 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Contreplaqué
Formulation (Génie chimique)
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Intumescence (chimie)
LignineLa lignine est un des principaux composants du bois, avec la cellulose, l'hémicellulose et des matières extractibles. La lignine est présente principalement dans les plantes vasculaires et dans quelques algues. Ses principales fonctions sont d'apporter de la rigidité, une imperméabilité à l'eau et une grande résistance à la décomposition. Toutes les plantes vasculaires, ligneuses et herbacées, fabriquent de la lignine. Quantitativement, la teneur en lignine est de 3 à 5 % dans les feuilles, 5 à 20 % dans les tiges herbacées, 15 à 35 % dans les tiges ligneuses. Elle est moindre pour les plantes annuelles que pour les vivaces, elle est maximum chez les arbres. La lignine est principalement localisée entre les cellules (voir parois pectocellulosiques), mais on en trouve une quantité significative à l'intérieur même de celles-ci. Bien que la lignine soit un réseau tridimensionnel hydrophobe complexe, l'unité de base se résume essentiellement à une unité de phénylpropane. La lignine est le deuxième biopolymère renouvelable le plus abondant sur la Terre, après la cellulose, et, à elles deux, elles cumulent plus de 70 % de la biomasse totale. C'est pourquoi elle fait l'objet de recherches en vue de valorisations autres que ses utilisations actuelles en bois d'œuvre et en combustible.
Voie de biosynthèse : La lignine est une molécule dont le précurseur est la phénylalanine. Cet acide aminé va subir une cascade de réactions faisant intervenir une dizaine de familles d'enzymes différentes afin de former des monolignols. Ces enzymes sont : phénylalanine ammonia-lyase (PAL), cinnamate 4-hydroxylase (C4H), 4-coumarate:CoA ligase (4CL), hydroxycinnamoyl-CoA shikimate/quinate hydroxycinnamoyl transferase (HCT), p-coumarate 3-hydroxylase (C3H), caffeoyl-CoA o-methyltransferase (CCoAOMT), cinnamoyl-CoA reductase (CCR), ferrulate 5-hydroxylase (F5H), caffeic acid O-methyltransferase (COMT) et cinnamyl alcohol deshydrogenase (CAD). Dans un certain nombre de cas, des aldéhydes peuvent également être incorporés dans le polymère.
Polyacryliques
Résonance magnétique nucléaire
Revêtements en phase aqueuse -- Additifs
Revêtements organiques
Revêtements protecteursIndex. décimale : 667.9 Revêtements et enduits Résumé : This study investigated the flame retardancy of water-based intumescent coatings for plywood by conducting flame retardancy tests by using water-based acrylic resin mixed with various concentrations (1%, 3%, 5%, and 10%) of alkaline lignin. Intumescent coatings containing alkaline lignin demonstrated superior flame retardancy compared with those without additives. At a concentration of 5%, the alkaline lignin promoted the formation of an ideal char layer during combustion. The chemical structure and durability of the phosphorus-carbon structure in the intumescent coatings were investigated through Fourier transform infrared spectroscopy and solid-state nuclear magnetic resonance analysis (13C and 31P). The analysis results reveal that intumescent coatings containing 5% alkaline lignin were more effective in reducing flammability than those containing higher concentrations of alkaline lignin. Note de contenu : - EXPERIMENT : Sample preparation - Thermal property analysis of intumescent coatings - Cone calorimeter tests - Infrared spectroscopy
13C and 31P solid-state NMR spectroscopy
- RESULTS AND DISCUSSION : Analysis of flame retardancy of intumescent coatings containing alkaline lignin - TGA of intumescent coatings - FTIR analysis - 13C and 31P solid-state NMR analysis
- Table 1 : Different formulations of intumescent coatings in a solid weight ratio (w/w)En ligne : https://link.springer.com/content/pdf/10.1007/s11998-023-00844-w.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40781
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 21, N° 2 (03/2024) . - p. 611-622[article]Flood coatings in KUNSTSTOFFE INTERNATIONAL, Vol. 101, N° 11 (11/2011)
[article]
Titre : Flood coatings Type de document : texte imprimé Année de publication : 2011 Article en page(s) : p. 48-49 Langues : Anglais (eng) Catégories : Revêtement en plastique
Revêtements protecteurs
Surfaces (technologie)Index. décimale : 668.4 Plastiques, vinyles Résumé : Refinement - Coating systems applied by the RIM process provide protection for premium real wood trim parts and give plastic surfaces that individual touch. Note de contenu : - Refining plastic surface
- protection for outdoor applications
- Process engineering supportPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=13174
in KUNSTSTOFFE INTERNATIONAL > Vol. 101, N° 11 (11/2011) . - p. 48-49[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13462 - Périodique Bibliothèque principale Documentaires Disponible PermalinkFluid-applied roof coatings : Effectively countering water damage in PAINTINDIA, Vol. LXVII, N° 2 (02/2017)
PermalinkFoam jackets for steel columns in PROTECTIVE COATINGS EUROPE (PCE), Vol. 5, N° 2 (04-05-06/2013)
PermalinkFormulating options for polysiloxane coatings / Gerald L. Witucki in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 30, N° 1 (01/2013)
PermalinkFormulation and characterization of hybrid polymeric/ZnO nanocomposite coatings with remarkable anti-corrosion and hydrophobic characteristics / Sh. Ammar in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 5 (09/2016)
PermalinkPermalinkPermalinkFunctional & specialty coatings for enhanced end use performance / Mukesh Kumar Madhup in PAINTINDIA, Vol. LXIX, N° 11 (11/2019)
PermalinkGallic acid-derived phosphorus-based flame-retardant multifunctional crosslinking agent for PU coating / Megh Patel in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 1 (01/2020)
PermalinkGetting to grips with corrosion under insulation / James C. Reynolds in EUROPEAN COATINGS JOURNAL (ECJ), N° 1 (01/2019)
PermalinkPermalinkA glass-based protective coating on stainless steel for slab reheating application / Peng Liu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 1 (01/2011)
PermalinkGlass flake in barrier coatings / Victoria Mirko in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 207, N° 4632 (06/2017)
PermalinkGraphene, an additive for the coatings market / Lynn Chikosha in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 212, N° 4675 (06/2022)
PermalinkGraphene - An incisive review of the wonder material / Ashwin Kumar Malviya in PAINTINDIA, Vol. LXXII, N° 2 (02/2022)
Permalink