Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
UV-curable polyurethane inorganic-organic hybrid coatings / Tong Xu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 6 (11/2021)
[article]
Titre : UV-curable polyurethane inorganic-organic hybrid coatings Type de document : texte imprimé Auteurs : Tong Xu, Auteur ; Irina J. Zvonkina, Auteur ; Mark D. Soucek, Auteur Année de publication : 2021 Article en page(s) : p. 1461-1479 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Aminopropyltriethoxysilane
Composés organiques -- Synthèse
Diisocyanate d'isophorone
Diluants
Formulation (Génie chimique)
Matériaux hybrides
Matériaux hybrides -- Propriétés mécaniques
Oligomères
Polyméthacrylate d'hydroxyéthyle
Polyuréthanes
Revêtements -- Propriétés mécaniques
Sol-gel, Procédé
TétraéthoxysilaneIndex. décimale : 667.9 Revêtements et enduits Résumé : A UV-curable inorganic/organic hybrid coating was prepared from a methacrylated urethane oligomer, a reactive diluent, tetraethyl orthosilicate (TEOS) oligomers, and a free radical photoinitiator. The reactive diluent was synthesized using IPDI, HEMA, and aminopropyltetraethoxysilane (APTES), resulting in both inorganic and organic reactive groups. The photocuring kinetics was investigated using photo-DSC and real-time FTIR spectroscopy. The effect of the reactive diluent and TEOS oligomers concentration was investigated using impact resistance, pencil hardness, and adhesion. Two glass transition temperatures were observed, indicating a substantial interfacial phase generated between the inorganic and organic domains. The reactive diluent-to-reactive oligomer ratio had a larger effect on the mechanical behavior of the system than the TEOS concentration did. Adhesion improves with increasing TEOS oligomer concentration or reactive diluent concentration until maxima, after which increasing concentration has an adverse effect on adhesion. Note de contenu : - MATERIALS : Synthesis of the reactive diluents - Synthesis of the acrylated urethane oligomers - Synthesis of TEOS oligomers - Coating formulation and application - Characterization of the film properties
- RESULTS AND DISCUSSION : The photocuring kinetics - Viscoelastic properties of the hybrid films - Tensile and general coatings properties
- Table 1 : Formulation of hybrid coatings with different contents of the reactive diluent
- Table 2 : Formulations of hybrid coatings with different contents of the TEOS oligomers
- Table 3 : Viscoelastic properties of the hybrid films as a function of the reactive diluent contents with 2.5 wt% of the TEOS oligomers
- Table 4 : Viscoelastic properties of hybrid films as a function of TEOS oligomers with the ratio of reactive diluents to acrylated urethane prepolymers: 25/75
- Table 5 : General coating properties of hybrid films as a function of reactive diluents with 2.5 wt% TEOS oligomers
- Table 6 : General coating properties of the hybrid films as a function of the TEOS oligomers, with the ratio of reactive diluents to urethane oligomers of 2.0 mol/molDOI : https://doi.org/10.1007/s11998-021-00473-1 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-021-00473-1.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36802
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 18, N° 6 (11/2021) . - p. 1461-1479[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23146 - Périodique Bibliothèque principale Documentaires Disponible UV-cured hybrid sol-gel coatings for aeronautical and direct-to-metal (DTM) applications / N. Moreau in SURFACE COATINGS INTERNATIONAL, Vol. 97.2 (05/2014)
[article]
Titre : UV-cured hybrid sol-gel coatings for aeronautical and direct-to-metal (DTM) applications Type de document : texte imprimé Auteurs : N. Moreau, Auteur ; L. Ni, Auteur ; Céline Croutxé-Barghorn, Auteur ; Abraham Chemtob, Auteur ; T. Bouder, Auteur ; G. Hervé, Auteur Année de publication : 2014 Article en page(s) : p. 116-119 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Anticorrosion
Avions -- Matériaux
Matériaux hybrides
Métaux -- Revêtements protecteurs
Photoréticulation
Revêtements -- Séchage sous rayonnement ultraviolet
Sol-gel, ProcédéIndex. décimale : 667.9 Revêtements et enduits Résumé : Corrosion protection in the aeronautic industry is a key issue. Nowadays, multilayer coatings are used to project aeronautical metallics strates. A typical system contains hexavalent chromium, or chromate, to provide high active corrosion protection, and comprises three layers applied on a previously-prepared surface. However, hexavalent chromium is an extremely toxic, carcinogenic, mutagenic and environmentally hazardous species. Frorn 2017, the use of chromate will be subjected to authorisation under the REACH Directive. Hence, the replacement of chromate compounds is an urgent and major issue for the aeronautic industry. Until now, Airbus Group Business Units including Airbus have succeeded in replacing chromate in the anodising and etching (chemical acid treatment to deoxidise and prepare metallic surfaces) steps. Some alternatives based on inorganic and organic inhibitors, lovv-temperature plasma deposition or sol-gel coatings'' have been investigated so far and reported. None of these approaches fias yet been found to be as efficient as chromate-based coatings. Note de contenu : - EXPERIMENTAL PART : Materials and coating preparation
- CHARACTERISATION TECHNIQUES : Salt spray test (SST) - Real-time Fourier Transformed Infrared Spectroscopy (RT-FTIR) - Nuclear Magnetic Resonance spectroscopy (NMR) - Contact angle - UV anc chemical resistance - Adhesion evaluation
- RESULTS AND DISCUSSION : Understanding protective mechanism of UV-cured hybrid sol-gel coatingsEn ligne : https://drive.google.com/file/d/1t1lx8rlQ92v5p91ty4rHPJhG9_0tX2Q1/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21307
in SURFACE COATINGS INTERNATIONAL > Vol. 97.2 (05/2014) . - p. 116-119[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16221 - Périodique Bibliothèque principale Documentaires Disponible UV-cured hybrid sol-gel coationgs for aeronautical and direct-to-metal (DTM) applications / N. Moreau in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4595 (04/2014)
[article]
Titre : UV-cured hybrid sol-gel coationgs for aeronautical and direct-to-metal (DTM) applications Type de document : texte imprimé Auteurs : N. Moreau, Auteur ; L. Ni, Auteur ; Céline Croutxé-Barghorn, Auteur ; Abraham Chemtob, Auteur ; T. Bouder, Auteur ; G. Hervé, Auteur Année de publication : 2014 Article en page(s) : p. 36-37 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Aluminium L'aluminium est un élément chimique, de symbole Al et de numéro atomique 13. C’est un métal pauvre, malléable, de couleur argent, qui est remarquable pour sa résistance à l’oxydation13 et sa faible densité. C'est le métal le plus abondant de l'écorce terrestre et le troisième élément le plus abondant après l'oxygène et le silicium ; il représente en moyenne 8 % de la masse des matériaux de la surface solide de notre planète. L'aluminium est trop réactif pour exister à l'état natif dans le milieu naturel : on le trouve au contraire sous forme combinée dans plus de 270 minéraux différents, son minerai principal étant la bauxite, où il est présent sous forme d’oxyde hydraté dont on extrait l’alumine. Il peut aussi être extrait de la néphéline, de la leucite, de la sillimanite, de l'andalousite et de la muscovite.
L'aluminium métallique est très oxydable, mais est immédiatement passivé par une fine couche d'alumine Al2O3 imperméable de quelques micromètres d'épaisseur qui protège la masse métallique de la corrosion. On parle de protection cinétique, par opposition à une protection thermodynamique, car l’aluminium reste en tout état de cause très sensible à l'oxydation. Cette résistance à la corrosion et sa remarquable légèreté en ont fait un matériau très utilisé industriellement.
L'aluminium est un produit industriel important, sous forme pure ou alliée, notamment dans l'aéronautique, les transports et la construction. Sa nature réactive en fait également un catalyseur et un additif dans l'industrie chimique ; il est ainsi utilisé pour accroître la puissance explosive du nitrate d'ammonium.
Anticorrosion
Avions -- Matériaux
Matériaux hybrides
Métaux -- Revêtements protecteurs
Photoréticulation
Revêtements -- Séchage sous rayonnement ultraviolet
Sol-gel, ProcédéIndex. décimale : 667.9 Revêtements et enduits Résumé : DTM coatings aim to ensure corrosion protection, while providing UV stable and glossy films. Photopolymerisable hybrid sol-gel coatings have been found to meet these requirements. The high passive corrosion resistance relies on the hybrid sol-gel ability to form dense barriers to corrosion initiator penetration. A high adhesion property is also provided by the formation of stable covalent bonds between the coating and the metal substrate. Compared to conventional DTM coatings, photopolymerisation presents the a dvantages of a fast curing at room temperature using low energy consumption equipment. The developed UV-cured hybrid sol-gel coatings are chromate-free and applied as a thin mono-layer (25pm dry film thickness (dft)). They provide high corrosion resistance on many metallic substrates, such as aeronautical aluminium alloys and good adhesion on different substrates even composites. Note de contenu : - EXPERIMENTAL PART : Materials and coating preparation - Characterisation techniques
- RESULTS AND DISCUSSION : Understanding protective mechanism of UV-cured hybrid sol-gel coatingsEn ligne : https://drive.google.com/file/d/1JTORNTWng5UTwxMy1Yk7TQLdp5btbHXk/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21154
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 204, N° 4595 (04/2014) . - p. 36-37[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16200 - Périodique Bibliothèque principale Documentaires Disponible UV-waterborne polyurethane-acrylate nanocomposite coatings containing alumina and silica nanoparticles for wood : mechanical, optical, and thermal properties assessment / Caroline Sow in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 2 (03/2011)
[article]
Titre : UV-waterborne polyurethane-acrylate nanocomposite coatings containing alumina and silica nanoparticles for wood : mechanical, optical, and thermal properties assessment Type de document : texte imprimé Auteurs : Caroline Sow, Auteur ; Bernard Riedl, Auteur ; Pierre Blanchet, Auteur Année de publication : 2011 Article en page(s) : p. 211-221 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Alumine
Bois -- Revêtements
Matériaux hybrides
Nanoparticules
Polyacrylates
Polyuréthanes
Revêtements en phase aqueuse -- Séchage sous rayonnement ultraviolet:Peinture en phase aqueuse -- Séchage sous rayonnement ultraviolet
SiliceLa silice est la forme naturelle du dioxyde de silicium (SiO2) qui entre dans la composition de nombreux minéraux.
La silice existe à l'état libre sous différentes formes cristallines ou amorphes et à l'état combiné dans les silicates, les groupes SiO2 étant alors liés à d'autres atomes (Al : Aluminium, Fe : Fer, Mg : Magnésium, Ca : Calcium, Na : Sodium, K : Potassium...).
Les silicates sont les constituants principaux du manteau et de l'écorce terrestre. La silice libre est également très abondante dans la nature, sous forme de quartz, de calcédoine et de terre de diatomée. La silice représente 60,6 % de la masse de la croûte terrestre continentale.Index. décimale : 667.9 Revêtements et enduits Résumé : The effect of alumina and silica nanoparticles on mechanical, optical, and thermal properties of UV-waterborne nanocomposite coatings was investigated. The addition of nanoalumina and nanosilica was shown to decrease the hardness because of nanoparticle aggregation. In comparison to the neat coating and despite the presence of aggregates, the scratch resistance of nanocomposite coatings was significantly improved. As expected, the gloss of UV-waterborne coatings was reduced following the addition of nanoparticles due to an increase of the surface roughness. Alumina and silica nanoparticles were found to enhance the glass transition temperature of PUA nanocomposite coatings by hindering the mobility of macromolecular chains at the interface around the nanoparticles. Finally, the interest and efficiency of grafting trialkoxysilanes was demonstrated with the study of nanosilica behavior. Not only was the dispersion of nanosilica enhanced following trialkoxysilanes grafting onto silica nanoparticles, but also the scratch resistance and the adhesion of UV-waterborne coatings containing nanosilica markedly increased even with 1 wt% content. Silica which is recommended in the wooden furniture and kitchen cabinet manufacturing industry as nano-reinforcement provides improved properties well suited in surface coating applications to efficiently protect surface of wood substrates. Note de contenu : - EXPERIMENTAL : Material - Preparation of UV-waterborne nanocomposite coatings - Characterization of UV-waterborne nanocomposite films (transmission electron microscopy - mechanical properties - optical properties - Thermal properties.
- RESULTS AND DISCUSSION : Characterization of surface modified nanosilica powder - Morphology of UV-waterborne nanocomposite coatings (UV-curing proces of UV-waterborne coating formulations - Dispersion of nanoparticles in UV-waterborne coatings) - Effect of nanoparticle content on mechanical properties of UV-waterborne coatings (scratch resistance - Adhesion) - effect of nanoparticle content on appearance properties of UV-waterborne coatings - Effect of nanoparticle content on thermal properties of UV-waterborne coatings.DOI : 10.1007/s11998-010-9298-6 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-010-9298-6.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11367
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 8, N° 2 (03/2011) . - p. 211-221[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012999 - Périodique Bibliothèque principale Documentaires Disponible Les véhicules électriques soutiennent la recherche / Thomas Malek in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 908 (12/2013)
[article]
Titre : Les véhicules électriques soutiennent la recherche Type de document : texte imprimé Auteurs : Thomas Malek, Auteur Année de publication : 2013 Article en page(s) : p 66-68 Langues : Français (fre) Catégories : Assemblages (technologie)
Automobiles électriques -- Conception et construction
Composites à fibres de verre
Matériaux -- Allègement
Matériaux hybrides
Matières plastiques -- Moulage par injection
Matières plastiques -- Surmoulage
Matières plastiques dans les automobiles
Polyamide 6Index. décimale : 668.4 Plastiques, vinyles Résumé : Le développement des véhicules électriques nécessite d'accélérer la recherche dans les matériaux hybrides afin de mettre en place des gammes de matériaux à la fois légers, robustes et bon marché. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20227
in PLASTIQUES & CAOUTCHOUCS MAGAZINE > N° 908 (12/2013) . - p 66-68[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15857 - Périodique Bibliothèque principale Documentaires Sorti jusqu'au 06/05/2024 Verrous à dépasser pour optimiser les performances et développer les applications des biocomposites ? / Christophe Baley in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 29, N° 4 (08/2019)
PermalinkVers une nanochimie douce et biomimétique / Jacques Livage in L'ACTUALITE CHIMIQUE, N° 290-291 (10-11/2005)
PermalinkVers des véhicules biosourcés ? / Dinhill On in FORMULE VERTE, N° 14 (06/2013)
PermalinkVibration damping properties of graphene nanoplatelets filled glass/carbon fiber hybrid composites / Ahmet Erklig in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 2 (2023)
PermalinkVinyl hybrid resins for automotive applications / James Bono in JEC COMPOSITES MAGAZINE, N° 91 (08-09/2014)
PermalinkViscoelastic modeling of extrudate swell of acrylonitrile-butadiene-styrene/clay nanocomposite / Amir Saadat in APPLIED RHEOLOGY, Vol. 23, N° 1 (2013)
PermalinkWaterborne etherified MF and PVAc hybrid resin containing nanoclay as intumescent flame-retardant plywood coatings / Chih-Shen Chuang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 3 (05/2023)
PermalinkWaterborne hybrid (alkyd/styrene acrylic) emulsion polymers and exterior paint applications / Nurullah Kartaloglu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 5 (09/2023)
PermalinkWaterborne silicone-organic hybrid coatings for exterior applications / T. Easton in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 4, N° 2 (06/2007)
PermalinkWood surface modification by in-situ sol-gel deposition of hybrid inorganic-organic thin films / Mandla A. Tshabalala in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 4, N° 4 (12/2007)
Permalink