Accueil
Catégories
> Polycarbonates
PolycarbonatesVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Designing for electromobility / Roland Brambrink in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 3 (03/2019)
[article]
Titre : Designing for electromobility : Development and simulative design of plastic components for lithium ion batteries Type de document : texte imprimé Auteurs : Roland Brambrink, Auteur ; Matthias Knaupp, Auteur ; Miguel Venancio Lopes, Auteur Année de publication : 2019 Article en page(s) : p. 13-16 Langues : Anglais (eng) Catégories : Eléments finis, Méthode des
Matières plastiques dans les automobiles
Piles électriques
Polycarbonates
Rhéologie
Simulation par ordinateur
TempératureIndex. décimale : 668.4 Plastiques, vinyles Résumé : Thanks to their technical properties, polycarbonates are predestined to be used as cell holders and housings of lithium-ion batteries for hybrid and purely electric vehicles. An exemplary development shows how material-compatible component design and the rheological, mechanical and thermal simulations necessary for this can help. Note de contenu : - Tailor-made battery materials
- Evaluating procesing and dimensional accuracy
- Mechanical simulation to prevent fire
- Route, distribute and dissipate heat
- Fig. 1 : Rheological layout of a cell holder. The mostly very-large wall thickness jumps are challenging. In particular, the low wall thickness of sometimes less than 1 mm in the region of the webs quickly lead to problems in filling the molded part, as the melt solidifies quickly
- Fig. 2 : The finite element simulation of the stock test shows the load in the plastics of the battery module; test bench for an actual shock test. The modules are Covestro test vehicles
- Fig. 3 : Simulation of the temperature distribution in a liquid-cooled battery module. The medium flows into the module on the outside left and absorbs the heat of the battery cells
- Fif. 4 : The simulation shows the flow lines of the air and the temperatures of the cells inchromatic gradationEn ligne : https://drive.google.com/file/d/1MDhyA7N-dxO_iqCiyidcKuUEizYUyAPs/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32110
in KUNSTSTOFFE INTERNATIONAL > Vol. 109, N° 3 (03/2019) . - p. 13-16[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20754 - Périodique Bibliothèque principale Documentaires Disponible Development of an immiscible polymer/polymer/nanoparticle system to assess the location of nanoparticles by quantitative optical microscopy / L. H. B. Johansen in INTERNATIONAL POLYMER PROCESSING, Vol. XXXI, N° 5 (11/2016)
[article]
Titre : Development of an immiscible polymer/polymer/nanoparticle system to assess the location of nanoparticles by quantitative optical microscopy Type de document : texte imprimé Auteurs : L. H. B. Johansen, Auteur ; L. B. Canto, Auteur ; S. V. Canevarolo, Auteur Année de publication : 2016 Article en page(s) : p. 607-617 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Alliages polymères
Composites thermoplastiques
Microscopie
Morphologie (matériaux)
Nanoparticules
Polycarbonates
Polystyrène
SiliceLa silice est la forme naturelle du dioxyde de silicium (SiO2) qui entre dans la composition de nombreux minéraux.
La silice existe à l'état libre sous différentes formes cristallines ou amorphes et à l'état combiné dans les silicates, les groupes SiO2 étant alors liés à d'autres atomes (Al : Aluminium, Fe : Fer, Mg : Magnésium, Ca : Calcium, Na : Sodium, K : Potassium...).
Les silicates sont les constituants principaux du manteau et de l'écorce terrestre. La silice libre est également très abondante dans la nature, sous forme de quartz, de calcédoine et de terre de diatomée. La silice représente 60,6 % de la masse de la croûte terrestre continentale.Index. décimale : 668.4 Plastiques, vinyles Résumé : The thermo-optical behavior of immiscible PS/PC blends filled with silica nanoparticles was studied in order to get some information upon the location of nanoparticles in the polymer blend phases and interface using optical microscopy. The systems were designed taking into account rheological and optical requirements, having droplet-matrix morphology, with particle size in the range of the visible light wavelength. The melt blending procedure helped to set the nanoparticles at specific locations including within the PC minor phase, PS matrix phase and PS/PC interphase, which was confirmed via transmission electron microscopy. The light scattering was measured via the normalized transmitted light intensity over temperature, encompassing the Tg of the two polymers. The PS/PC blends showed an increase in the light scattering as compared to the pure polymers, which is magnified upon increasing the PC content. The addition of the nanosilica forming PS/PC/Nanosilica systems greatly reduces the light scattering, particularly above the Tg of the PS phase. The use of hydrophilic nanosilica does not show any appreciable hysteresis upon comparing data from heating and cooling cycles. This type of silica stays mainly trapped within the PC dispersed phase, little interfering with the light scattering, which happens at the polymer-polymer interface. On the other hand, the use of hydrophobic nanosilica does show a clear hysteresis. The hydrophobic silica located at the PS/PC interphase, interfere with the light scattering intensity at this interface, and can be used to identify its presence. The proposed procedure can help control the mixing process, thus improving the effective action of the nanoparticles in the final properties of polymer systems. Note de contenu : - EXPERIMENTAL : Materials - Polymer blending procedure - Phase morphology characterization - Transmitted light intensity quantification
- RESULTS AND DISCUSSION : Designing the polymer-polymer-nanoparticle system - Morphology visualization via transmission electron microscopy - Quantitative optical microscopy -DOI : 10.3139/217.3241 En ligne : https://drive.google.com/file/d/1WYb-gYg0UrR9gSXTe0dtiHEPCF3V27Yo/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27398
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXI, N° 5 (11/2016) . - p. 607-617[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18491 - Périodique Bibliothèque principale Documentaires Disponible Developments in waterborne thermal insulation coatings / Sudhir Achar in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 30, N° 3 (03/2013)
[article]
Titre : Developments in waterborne thermal insulation coatings Type de document : texte imprimé Auteurs : Sudhir Achar, Auteur ; Leo J. Procopio, Auteur Année de publication : 2013 Article en page(s) : p. 48-59 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Aérogels
Allongement (mécanique)
Anticorrosion
Charges (matériaux)
Epoxydes
Gel de silice
Isolants
Isolation thermique
Métaux -- Revêtements protecteurs
Microsphères
Polyacryliques
Polycarbonates
Primaire (revêtement)
Revêtements -- Propriétés mécaniques:Peinture -- Propriétés mécaniques
Revêtements en phase aqueuse:Peinture en phase aqueuse
ThermocinétiqueIndex. décimale : 667.9 Revêtements et enduits Résumé : The inadvertent transfer of thermal energy in the form of heat leads to a variety of issues in industrial settings. Issues include heat loss from processing equipment and piping, increased energy usage, worker injuries from contact with hot substrates, and associated costs. The traditional insulation methods to combat these issues include use of materials such as fiberglass and polyurethane foam ; however, thick layers of insulation can often hide severe maintenance problems such as corrosion under insulation (CUI).
An alternative to traditional insulation is the use of thin-film thermal insulation coatings based on waterborne acrylic and epoxy resins. This article describes our efforts to better understand the polymer design and formulation parameters for these thin-film waterborne thermal insulation coatings. Their potential use in thermal insulation will be described through test results on thermal conductivity, safe-touch properties, and corrosion performance in multilayer systems that can be applied by traditional methods. Both one-component waterborne acrylic and two-component waterborne epoxy resins and coating formulations have been evaluated and compared to commercial insulation coatings. The use of two types of low thermal conductivity fillers, hollow glass microspheres and silica aerogel, is also described.Note de contenu : - How heat transfers
- Types of thermal insulation for industrial plants
- Experimental
- Table 1 : Thermal conductivity on common materials
- Table 2 : Coating identification for insulation coatings evaluated
- Table 3 : Results of thermal conductivity measurement
- Table 4 : Results of tensile, elongation, adhesion, humidity, and salt spray testing for insulation coatingsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18792
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 30, N° 3 (03/2013) . - p. 48-59[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14951 - Périodique Bibliothèque principale Documentaires Disponible Le dioxyde de carbone : une matière première pour l'industrie chimique / Michael Röper in L'ACTUALITE CHIMIQUE, N° 371-372 (02-03/2013)
[article]
Titre : Le dioxyde de carbone : une matière première pour l'industrie chimique Type de document : texte imprimé Auteurs : Michael Röper, Auteur Année de publication : 2013 Article en page(s) : p. 62-66 Note générale : Glossaire - Bibliogr. Langues : Anglais (eng) Catégories : Dioxyde de carbone -- Capture
Dioxyde de carbone -- Emploi dans l'industrie chimique
Matières premières
Méthanol
PolycarbonatesIndex. décimale : 628.53 Pollution de l'air et lutte antipollution Résumé : Pour réduire notre dépendance vis-à -vis des ressources en combustibles fossiles et atténuer les problèmes associés aux émissions de CO2, il est temps pour l'humanité de passer de l'énergie solaire fossilisée à l'énergie solaire en temps réel. Nous ne sommes pas à vrai dire en face d'une crise énergétique. Le Soleil délivre chaque heure sur la Terre l'équivalent de l'énergie consommée par l'humanité entière en une année. Plutôt qu'un problème énergétique, nous avons un problème de collecte et de stockage de l'énergie. La photosynthèse naturelle utilise l'énergie solaire avec la chlorophylle présente dans les plantes comme catalyseur pour recycler le dioxyde de carbone et l'eau. Imiter la Nature en capturant et en recyclant le CO2 pour faire du méthanol, du diméthyl éther et des produits dérivés en utilisant n'importe quelle source d'énergie alternative nous offre une source durable de carbone pour nos besoins en carburants et matériaux, bien au-delà de la brève ère des combustibles fossiles. Le CO2 nécessaire peut venir dans un premier temps de sources industrielles, mais devra éventuellement être capturé directement de l'atmosphère. Le CO2 peut donc être transformé chimiquement d'un gaz à effet de serre causant le réchauffement climatique en une source de carbone renouvelable et inépuisable. Note de contenu : - Les sources disponibles de dioxyde de carbone
- L'utilisation actuelle du dioxyde de carbone
- L'usage chimique du dioxyde de carbone peut-il contribuer à la protection du climat ?
- Stockage de l'énergie renouvelable par hydrogénation du dioxyde de carbone
- Nouveaux procédés catalytiques pour la conversion du dioxyde de carboneEn ligne : https://new.societechimiquedefrance.fr/numero/le-dioxyde-de-carbone-une-matiere- [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17684
in L'ACTUALITE CHIMIQUE > N° 371-372 (02-03/2013) . - p. 62-66[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14754 - Périodique Bibliothèque principale Documentaires Disponible Direct imprinting using magnetic nickel mold and electromagnetism assisted pressure for replication of microstructures / Y.-J. Weng in INTERNATIONAL POLYMER PROCESSING, Vol. XXVI, N° 5 (11/2011)
[article]
Titre : Direct imprinting using magnetic nickel mold and electromagnetism assisted pressure for replication of microstructures Type de document : texte imprimé Auteurs : Y.-J. Weng, Auteur Année de publication : 2011 Article en page(s) : p. 485-489 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Impression à chaud
Microstructures
Ondes électromagnétiques
PolycarbonatesIndex. décimale : 668.9 Polymères Résumé : This study proposes a simple technology using electromagnetism to control the direct hot imprint resist of a nickel mold. Combining the present gas-assisted hot imprint molding technology, electroforming technology, and self-designed heatable electromagnetic plate for even control and progressive pressuring technology, this study used electromagnetic nickel mold direct hot imprint to replicate microstructures, in order to make the molding technology and application of micro/nanoimprint more mature. This study first used gas-assisted hot embossing method to replicate structures on polycarbonate (PC), this PC film with microstructures is cast into nickel molds by electroforming. This nickel mold was used as the mold for magnetic embossing to imprint hot plastic polymethylmethacrylate (PMMA). The result showed that through gas-assisted hot embossing molding and electroforming, molds with high costs and complicated production processes can be massively replicated, and the replication precision is good. Through electroforming, the casting duration of magnetic nickel molds can be shortened and costs can be effectively lowered. Moreover, an electromagnetic plate was used to evenly control the direct hot pressure imprint resist, which is an advantage of the production process for micro structures. DOI : 10.3139/217.2423 En ligne : https://drive.google.com/file/d/16oI4w2Fa4MZGYHazmGPficGa23YJ7nzO/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=12464
in INTERNATIONAL POLYMER PROCESSING > Vol. XXVI, N° 5 (11/2011) . - p. 485-489[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13440 - Périodique Bibliothèque principale Documentaires Disponible Eco-friendly fire prevention / Rudolf Pfaendner in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 8 (08/2014)
PermalinkEffect of repeated sterilization / Miriam Haerst in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 2 (02/2013)
PermalinkEffect of screw rotation speed on the properties of polycarbonate/vapor-grown carbon fiber composites prepared by melt compounding / Shuichi Tanoue in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 1 (03/2014)
PermalinkEffects of injection molding holding pressure on the replication of surface microfeatures / T. R. Tofteberg in INTERNATIONAL POLYMER PROCESSING, Vol. XXV, N° 3 (07/2010)
PermalinkEffects of surface fluorination on the dyeing of polycarbonate (PC) resin / Jae-Ho Kim in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 2 (03/2022)
PermalinkEfficient production of thick-walled parts / Christian Maier in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 9 (09/2013)
PermalinkEntering the third dimension with light-colored LDS additive / Markus Heidebrecht in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 5 (05/2017)
PermalinkEtude des relations entre contrainte et orientation moléculaire au voisinage de Tg dans les polymères amorphes / Clarisse Luap in LES CAHIERS DE RHEOLOGIE, Vol. XI, N° 3-4 (10/1993)
PermalinkExperimental investigation of PC-films using optical measurements / Christian Dammann in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 2 (05/2014)
PermalinkExploring the applicability of a simplified fully coupled flow/orientation algorithm developed for polymer composites extrusion deposition additive manufacturing / Zhaogui Wang in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 1 (2022)
PermalinkFabrication and investigating the structural and dielectric characteristics of In2O3-GOPMMA-PC nanostructures for electronics nanodevices / Dhay Ali Sabur in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 33, N° 1 (02/2023)
PermalinkFabrication of double-sided micro-lens array using UV injection molding / X.-L. Chen in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 1 (03/2019)
PermalinkFacelift for electric vehicles / Jochen Holzleitner in KUNSTSTOFFE INTERNATIONAL, Vol. 112, N° 5 (2022)
PermalinkPermalinkFeel-good ambient lighting demands perfection / F. Stephan Auch in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 3 (03/2019)
PermalinkFiber glass-reinforced polycarbonate compounds / Jon Malinoski in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 1 (01/2012)
PermalinkFilm casting of polycarbonate/multi-walled carbon nanotubes composites using ultrasound-assisted twin-screw extruder: experiment and simulation / Xiang Gao in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 4 (2022)
PermalinkFoam injection molding 2.0 / Wolfgang Bauer in KUNSTSTOFFE INTERNATIONAL, Vol. 104, N° 12 (12/2014)
PermalinkFocused on the light / Florian Dorin in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 5 (05/2012)
PermalinkForm-fitted hybrid lightweight construction / Pia Wagner in PLASTICS INSIGHTS, Vol. 113, N° 6 (2023)
Permalink