![](./images/home.jpg)
![](./images/bar_spacer.gif)
Catégories
![](./images/expand_all.gif)
![](./images/collapse_all.gif)
Etendre la recherche sur niveau(x) vers le bas
Keeping roofs cool / George R. Pilcher in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 194, N° 4483 (12/2004)
[article]
Titre : Keeping roofs cool Type de document : texte imprimé Auteurs : George R. Pilcher, Auteur Année de publication : 2004 Article en page(s) : p. 28-31 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Esthétique
Revêtements en bâtiment:Peinture en bâtiment
Toiture -- Revêtements:Toiture -- PeintureIndex. décimale : 667.9 Revêtements et enduits Résumé : This article examines why aesthetics are important for buildings with steep roofs and new building code requirements.
In general, roofing and roofing materials are characterised as being 'low-slope' or 'steep-slope'. Low-slope is generally considered in the industry as a roof with a 'rise-over-run' of two feet in 12 ('2:12') or less. (Flat roofs are de facto considered to be in the 'low-slope' category). Steep-slope would be any roof with a rise-over-run relationship of greater than 2:12 (>10°). In general, steep-slope roofs are more common in residential applications, while low-slope roofs are more common in commercial applications, although this is certainly not a hard-and-fast rule.
Another significant difference between low-slope and steep-slope roofing has to do with aesthetic considerations. Generally, low-slope roofing cannot be seen from ground level, so the appearance of such roofing is not a major factor. Steep-slope roofing, however, is easily visible and 'look count'. As a result, manufacturers of steep-slope roofing products invest considerable resources addressing aesthetic issues.
Asphalt shingles are now commonly supplied with dimensional characteristics and variegated colour schemes. Painted metal roofing comes in thousands of different colours, shapes, sizes and textures. Concrete tile, clay tile, and cedar shake roofing are all designed with performance and aesthetic in mind. Because of the different requirements for steep-slope vs low-slope roofing i.e., steep-slope roofs are typically designed as water-shedding systems, low-slope roofs are designed to form a seal against water penetration - different materials are typically used in their composition and construction.Note de contenu : - National initiatives
- New building code requirements for cool roofing in California
- Cool Roof Rating Council (CRRC)
- ASHRAE and other states
- Excellent timingPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27672
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 194, N° 4483 (12/2004) . - p. 28-31[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 000290 - Périodique Bibliothèque principale Documentaires Disponible 000291 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Keeping up appearances : A green, zero-VOC, clay-based additive reduces the growth of algae, thereby thwarting coating degradation Type de document : texte imprimé Auteurs : Julia Karasa, Auteur ; Solvita Kostjukova, Auteur ; Juris Kostjukovs, Auteur ; Davids Stebelis, Auteur Année de publication : 2022 Article en page(s) : p. 30-33 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Algues
Argile
Caractérisation
Essais (technologie)
Revêtements -- Additifs
Revêtements antisalissures
Revêtements en bâtimentIndex. décimale : 667.9 Revêtements et enduits Résumé : Historical buildings and stone monuments are affected by various processes that impair the aesthetics and reduce their lifespan and reliability. Microbial populations present in a stone substratum are usually the result of successive colonisation by different micro-organisms over the course of several years. It is a process that relies upon the capacity of a substratum to provide a protective niche on which micro-organisms can develop. Note de contenu : - Rising demand for biocides
- Tackling algal growth
- Preparation and characterisation of the clay-based additive
- Field tests
- No algal growth
- Lab tests
- Dosage confirmation
- Table 1 : Preparation of testing surfaces, dosage of clay-based additiveEn ligne : https://drive.google.com/file/d/1hRqW3iXOgeCtq1YW0oI4Di-oDIaBqy_T/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37470
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 4 (04/2022) . - p. 30-33[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23348 - Périodique Bibliothèque principale Documentaires Disponible Lactide-modified polyester resins with enhanced resin efficiency and improved coating performance / Bas Van Leeuwen in SURFACE COATINGS INTERNATIONAL, Vol. 98.1 (02/2015)
![]()
[article]
Titre : Lactide-modified polyester resins with enhanced resin efficiency and improved coating performance Type de document : texte imprimé Auteurs : Bas Van Leeuwen, Auteur ; Armin Michel, Auteur ; Ludo Hart de Ruijter, Auteur Année de publication : 2015 Article en page(s) : p. 29-32 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Brillance (optique)
Coût -- Contrôle
Formulation (Génie chimique)
Gaz à effet de serre -- Réduction
LactideLe lactide est le diester cyclique de l’acide lactique et le monomère qui permet de synthétiser le PLA (Poly Lactique Acide) par polymérisation d’ouverture de cycle (ROP).
Issu de l’acide lactique (ou acide 2-hydroxypropanoïque) et produit par fermentation du saccharose ou du glucose, le lactide est d’origine naturelle et renouvelable. Ce produit s’inscrit parfaitement dans le cadre du développement de la chimie verte. Le lactide, étant issu de l’acide lactique qui possède 2 formes stéréo-isomériques (acide lactique L(+) et acide lactique D(-)),existe sous 3 formes stéréo-isomériques : la forme L-lactide, la forme D-lactide et la forme Méso-lactide.
Polyalkydes
Polymères -- Synthèse
Réduction des composés organiques volatils
Ressources renouvelables
Revêtement en phase solvant:Peinture en phase solvant
Revêtements en bâtiment:Peinture en bâtiment
Rhéologie
vernis en phase solvantIndex. décimale : 667.9 Revêtements et enduits Résumé : Résines alkydes ont été utilisés pendant de nombreuses années pour produire des matériaux de haute performance, tels que les revêtements architecturaux à base de solvants. Au fil du temps, des règles plus strictes sur volatils
Composés organiques (COV) et les préoccupations environnementales ont conduit à l'utilisation préférentielle de produits réduits de solvants dans l'industrie de la peinture. Le bloc de construction à base de lactide bio-unique fournit une viscosité nettement plus faible lorsqu'il est incorporé dans une résine alkyde, permettant pour les formulations solides élevés, réduction significative de la réduction des solvants et de coût. En outre, les formulations de peinture lactide modifié montrent améliorées temps de séchage, une dureté initiale améliorée - maintenues au fil du temps, un excellent brillant et brillant rétention, et moins jaunissement (dans des conditions forcées) que le matériau de référence. En outre, lactide a une faible empreinte carbone et lorsqu'ils sont incorporés dans ces résines réduit ainsi les émissions de CO2.Note de contenu : - LACTIDE-MODIFIED RESINS
- EXPERIMENTAL : Alkyd resin synthesis - Coating formulation for alkyd resins
- RESULTS AND DISCUSSION : Resin synthesis - Coatings formulation - Reduced carbon footprint
- Table 1 : Medium-oil alkyd resin formulations
- Table 2 : Long- and medium-oil alkyd resin formulations
- Table 3 : Theoretical long- and medium-oil alkyd resin formulation data
- Table 4 : Clearcoat alkyd resin formulations
- Table 5 : White coat alkyd resin formulationsEn ligne : https://drive.google.com/file/d/1RXHNpD25k-K_-2mXnh6aot5nhptar9e0/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23251
in SURFACE COATINGS INTERNATIONAL > Vol. 98.1 (02/2015) . - p. 29-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16973 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Leaching in facade paints : Prevent "snail trails" with novel additves - and find out what causes them Type de document : texte imprimé Auteurs : Dorothee Gabel, Auteur ; Jörg Rüger, Auteur Année de publication : 2019 Article en page(s) : p. 90-94 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Agents dispersants (chimie)
Analyse qualitative (chimie)
Analyse quantitative (chimie)
Chromatographie en phase liquide à hautes performances
Formulation (Génie chimique)
Liants
Lixiviation
Revêtements -- Additifs:Peinture -- Additifs
Revêtements -- Analyse:Peinture -- Analyse
Revêtements -- Défauts:Peinture -- Défauts
Revêtements en bâtiment:Peinture en bâtimentIndex. décimale : 667.9 Revêtements et enduits Résumé : Façade paint can leach when water condenses on freshly dried painted walls, leaving behind shiny vertical "snail trails" that alter and deteriorate the façade's appearance. To date, predicting a paint formulation's tendency towards leaching is difficult, because the phenomenon is poorly understood, and no standardised analytical methods exist. A newly-developed test method can mimic leaching conditions and help in studying the influence of paint ingredients on the occurrence of snail trails. In addiction, we devised a new polymeric dispersant that is resistant to leaching to aid formulators. Note de contenu : - Novel test methods hepl to track down the source of the snail trails
- Qualitative test - does the paint formulation develop snail trails?
- Illustrating the pratical use of the test: various binders in a paint formulation
- Quantitative test: finding the root cause of leaching in a paint
- Case study: dispersant
- Fig. 1 : Preparing the foil and foil including pockets in a Kesternich chamber
- Fig. 2 : Microscope image of a snail trail on the surface of the panel
- Fig. 3 : Images of Binder 2, showing film-forming residue in the pocket, shiny "snail trails" by microscope and shiny still trails on the foil surface
- Fig. 4 : Modified aquarium with a cold-water vapour condenser attached to it to studt leaching
- Fig. 5 : HPLC traces of the surfactant type dispersant as standard versus in the paint
- Table 1 : Simplified paint formulation for leaching tests
- Table 2 : Binders studied in the qualitative test
- Table 3 : Pigment paste formulationEn ligne : https://drive.google.com/file/d/1yg2ubmAMcjyIBO6O08eN7S0HwoYWpEfc/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31680
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 2 (02/2019) . - p. 90-94[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20597 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Less is more for new technology : Novel silicone resin for high-performing, lower-cost facade paints and plasters Type de document : texte imprimé Auteurs : Markus Vogel, Auteur ; Roger Reinartz, Auteur ; Daniel Brünink, Auteur Année de publication : 2018 Article en page(s) : p. 28-32 Langues : Anglais (eng) Catégories : Applications extérieures
Hydrophobie
Résistance aux conditions climatiques
Revêtement mural:Peinture murale
Revêtements en bâtiment:Peinture en bâtiment
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 667.9 Revêtements et enduits Résumé : Facade paints need to be both decorative and weathering resistant as well as meet increasing customer requirements. Extending the colour range and environmental compatibility at the same time as reducing costs poses a real challenge. However, researchers believe they have developed a new hydrophobing agent using silicone resin technology that sets a new standard. Note de contenu : - High water-vapour diffusion with silicone resin
- Fast-developing water resistance
- Highly effective at low concentrations
- Lower dirt pick-up
- Greater colour choice with organic pigments
- Processing and storage benefits
- Environmentally compatible for broad market access
- Reduced costs and greater performanceEn ligne : https://drive.google.com/file/d/1fPZjiJxxk2p5YCpKljSVecUgmTuxFig6/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29768
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 1 (01/2018) . - p. 28-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19497 - Périodique Bibliothèque principale Documentaires Disponible Life-cycle assessment of architectural coatings / Tim Wieroniey in COATINGS TECH, Vol. 15, N° 8 (08/2018)
![]()
PermalinkPermalinkPermalinkA longer life for masonry paints / Marie Bleuzen in EUROPEAN COATINGS JOURNAL (ECJ), N° 11 (11/2011)
![]()
PermalinkLow and no-VOC architectural coatings containing ambient curing functional groups / Zhiyu Wang in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 68, N° 852 (01/1996)
PermalinkMake exterior paint colourful with inorganic pigments / Filippo Busolo in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 207, N° 4629 (03/2017)
![]()
PermalinkMeasurement of total solar reflectance for 'cool coatings' / Céline de Lame in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4627 (12/2016)
![]()
PermalinkPermalinkMeeting current and future legislations / Carlo Testa in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4594 (03/2014)
![]()
PermalinkModern formulations for architectural paints / Vicky James in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4558 (03/2011)
![]()
PermalinkModified colloidal silica in silicate paints / Céline de Lame in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4544 (01/2010)
PermalinkModified hyperbranched resins : the key technologyfor low VOC architectural trim paints / Petri Mast in DOUBLE LIAISON, N° 560 (12/2007)
PermalinkMortiers de joints et colles à carrelage. Partie 1 : Détermination de la résistance chimique des mortiers à base de résines réactives - Norme NF EN 12808-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1999)
PermalinkNanofunctional calcium carbonate for architectural paints / Holger Lanz in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 202, N° 4573 (06/2012)
![]()
PermalinkNew dark colour options for exterior insulation and finishing systems / Bas van Ravenswaaij in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4606 (03/2015)
![]()
PermalinkNew developments in elastomeric masonry coatings / Miriam Peralta in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4594 (03/2014)
![]()
PermalinkNew developments in vinyl acetate-ethylene (VAE) / Rajeev Farwaha in COATINGS TECH, Vol. 9, N° 1 (01/2012)
![]()
PermalinkNew generation of VAE emulsion / S. Krieger in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4551 (08/2010)
![]()
PermalinkNext generation additive performance - modern formulations for decorative paints and coatings / Vicky James in PAINTINDIA, Vol. LXII, N° 4 (04/2012)
PermalinkNext generation architectural paint applications / Luis Madrigal in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4546 (03/2010)
PermalinkNext generation high-performance polymeric grinding resins for architectural coatings / Thomas Schoenbacher in PAINTINDIA, Vol. LXIV, N° 4 (04/2014)
![]()
PermalinkNon-migratory surfactants in emulsion polymerisation / Jo Grade in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4627 (12/2016)
![]()
PermalinkNorme d'exécution des travaux. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Norme NF P 84-404-1/A1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2000)
PermalinkNorme d'exécution des travaux. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Norme NF P 84-404-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1993)
PermalinkNorme d'exécution des travaux. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Norme NF P 84-404-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1993)
PermalinkNorme d'exécution des travaux. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Norme NF P 84-404-3 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1993)
PermalinkNovel acrylic polymer for architectural exterior paint and primer in one coatings application / Kaliappa Ragunathan in COATINGS TECH, Vol. 15, N° 2 (02/2018)
![]()
PermalinkNovel applications in low VOC coatings / Jean Meng in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4546 (03/2010)
PermalinkNovel super-durable, flexible powder coatings / Jan Bongaerts in EUROPEAN COATINGS JOURNAL (ECJ), N° 6 (06/2022)
![]()
PermalinkNovel UVA/HALS blend for high performance waterborne coatings / Delphine Kimpel in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4604 (01/2015)
![]()
PermalinkOMYA - Itech - Orgon - Octobre 2011 / Institut National de Recherche et de Sécurité / Paris : INRS (2005)
PermalinkPermalinkOvercoming technical challenges in emulsion polymer (dirt pickup resistance) / Suraj Ashok Sawant in PAINTINDIA, Vol. LXXI, N° 12 (12/2021)
![]()
PermalinkPainting and finishing exterior wood / William C. Feist in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 68, N° 856 (05/1996)
PermalinkPaints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : Coatings prepared from coating - Norme EN 12206-1 / Comité Européen de Normalisation / Bruxelles [Belgique] : CEN (2004)
PermalinkPermalinkPermalinkPermalinkPermalinkPeinture poudre & liquide. De nouveaux besoins in GALVANO ORGANO, N° 822 (08/2013)
PermalinkLes peintures aqueuses à haute performance / Association Française des Techniciens des Peintures, Vernis, Encres et Adhésifs / Paris : AFTPVA (1996)
PermalinkLes peintures décoratives bâtiment et l'environnement, enjeux et nouvelles voies de développement / Association Française des Techniciens des Peintures, Vernis, Encres et Adhésifs Rhône-Alpes / AFTPVA Rhône-Alpes (1997)
PermalinkPeintures. Enduits de peinture pour travaux intérieurs. Méthodes de préparation des différents types d'enduits à soumettre aux essais de laboratoire - Norme NF T 30-600 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1977)
PermalinkPeintures et revêtements / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2005)
PermalinkPeintures et revêtements dans les grands chantiers / (AFTPV) Association Française des Techniciens des Peintures et Vernis / Paris : AFTPVA (1992)
PermalinkPeintures et vernis. Essai de lavabilité - Norme NF T 30-082 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1986)
PermalinkPeintures et vernis. Façades - Revêtement à base de polymères utilisés en réfection des façades en service - Norme NF P 84-401 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1989)
PermalinkPeintures et vernis. Façades - Revêtement à base de polymères utilisés en réfection des façades en service - Norme NF P 84-402 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1989)
PermalinkPeintures et vernis. Façades - Revêtement à base de polymères utilisés en réfection des façades en service - Norme NF P 84-403 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1989)
PermalinkPeintures et vernis. Produits de peinture et systèmes de peinture en phase aqueuse pour murs et plafonds intérieurs - Classification - Norme NF EN 13300 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2002)
PermalinkPerformance of exterior semitransparent PVDF–acrylic coatings / Véronic Landry in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 10, N° 1 (01/2013)
![]()
PermalinkUn peu de finesse pour les peintures à changement de phase / Baptiste Cessieux in DOUBLE LIAISON, N° 614 (12/2016)
PermalinkLes pollutions des revêtements filmogènes / Association Française des Techniciens des Peintures, Vernis, Encres et Adhésifs Rhône-Alpes / AFTPVA Rhône-Alpes (1991)
PermalinkPolymer blend systems for waterborne coatings / Jitendra U. Agare in PAINTINDIA, Vol. LVII, N° 11 (11/2007)
PermalinkPolymer shielded biocide technology / Emmanuelle Yvon in EUROPEAN COATINGS JOURNAL (ECJ), N° 2 (02/2014)
![]()
PermalinkPolymerizable allyl anionic and nonionic emulsifier: synthesis and properties of its emulsion for architectural coating / Ye Wang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 6 (11/2021)
![]()
PermalinkPolyurethane rheological additives for water based architectural paints / Ramakant Maurya in PAINTINDIA, Vol. LXXIII, N° 3 (03/2023)
![]()
PermalinkPrediction of architectural coating performance using titanium dioxide characterization applying artificial neural networks / Pablo René Aragon Candelaria in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 4 (07/2010)
![]()
PermalinkPremium patented real wood effect technology and system to imitate natural wood pattern with powder on powder coating process of architectural aluminium profiles, doors, sheets / K. K. Deodhar in PAINTINDIA, Vol. LVIII, N° 12 (12/2008)
PermalinkPreparation and characterisation of fluorinated cationic acrylic latex / Wen Li in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4606 (03/2015)
![]()
PermalinkProgrès des peintures aqueuses dans l'ennoblissement des matériaux. Nice, le 15 septembre 1993 / Symposium Association de Recherches Scientifiques Paul Neumann / Symposium Association de Recherches Scientifiques Paul Neumann (1993)
PermalinkProtection using encapsulated biocides / Werner Duttlinger in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4587 (08/2013)
![]()
PermalinkPutty / plasters / undercoats & other materials / Harish Agrawal in PAINTINDIA, Vol. LXXII, N° 12 (12/2022)
![]()
PermalinkPermalinkRaising the bar for façade paints and plasters / Markus Vogel in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4664 (09/2020)
![]()
PermalinkReview of waterproof painting techniques by using suitable technology / Sunil Khairnar in PAINTINDIA, Vol. LXV, N° 12 (12/2015)
![]()
PermalinkService life prediction of colour retention for PVDF architectural coatings with organic pigments / Kurt A. Wood in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 89, B3 (09/2006)
![]()
PermalinkSolar reflective colorants for building exteriors and façades / Bas van Ravenswaaij in SURFACE COATINGS INTERNATIONAL, Vol. 96, 5 (11/2013)
![]()
PermalinkSurface-treated boehmite nano-particles for improved scratch resistance / U Nolte in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4591 (12/2013)
![]()
PermalinkSustainable protection of building façades / Frank Sauer in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4580 (01/2013)
![]()
PermalinkSustainable protection of façades with innovative slow release technique / Monika Lamoratta in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4616 (01/2016)
![]()
PermalinkSustainable solutions for decorative interior paint / Jonathan Doll in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 204, N° 4594 (03/2014)
![]()
PermalinkSynthesis and characterisation of surface-treated barium sulphate extender pigment in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 198, N° 4531 (12/2008)
![]()
PermalinkTechnological scenario for green and sustainable architectural coatings / Vaibhav J. Dave in PAINTINDIA, Vol. LXIV, N° 8 (08/2014)
![]()
PermalinkPermalinkTGIC and lead-free powder coatings / Ashraf El Wassify in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4547 (04/2010)
PermalinkThe difference in formulating interior and exterior photocatalytic coatings / Jürgen Kirchner in DOUBLE LIAISON, N° 562 (05/2008)
PermalinkThe effect of precipitated calcium carbonate nanoparticles in coatings / W. S. Wu in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 2 (03/2016)
![]()
PermalinkThe influence of hydrophobic protection on building exterior claddings / Carlos Esteves in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 5 (09/2019)
![]()
PermalinkPermalinkThe role of coalescents in architectural coatings / C. Testa in SURFACE COATINGS INTERNATIONAL, Vol. 90, 2 (03/2007)
![]()
PermalinkPermalinkTravaux de bâtiment. Protection des façades en service par revêtements d'imperméabilité à base de polymères - Norme NF P 84-405 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1997)
PermalinkTravaux de bâtiment. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Partie 1-1 : Cahier des clauses techniques - Norme NF DTU 42.1P1-1 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2007)
PermalinkTravaux de bâtiment. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Partie 1-2 : Critères généraux et choix des matériaux - Norme NF DTU 42.1P1-2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2007)
PermalinkTravaux de bâtiment. Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Partie 2 : Cahier des clauses spéciales - Norme NF DTU 42.1 P2 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2007)
PermalinkPermalinkPermalinkPermalinkUltra weathering resistance powder coatings equal to liquid PVDF coatings / Sivaraj D. in PAINTINDIA, Vol. LXIX, N° 6 (06/2019)
![]()
PermalinkUse of optical density and TiO2 light scattering / R. T. Abrahao in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4624 (09/2016)
![]()
PermalinkUtilitarian and good looking / Steven Reinstadtler in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4589 (10/2013)
![]()
PermalinkVAE-dispersions for a variety of coatings applications / Kevin Merlo in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4618 (03/2016)
![]()
PermalinkVeoVa 10 vinyl ester based binders for interior silk and exterior architectural paints / Claude Nootens in PAINTINDIA, Vol. LXIV, N° 3 (03/2014)
![]()
PermalinkWater-based acrylic dispersions / Roland Baumstark / Hannover [Germany] : Vincentz Network GmbH & Co. (2022)
Permalink