Accueil
EUROPEAN COATINGS JOURNAL (ECJ) . N° 9Automotive coatingsMention de date : 09/2017 Paru le : 21/09/2017 |
Dépouillements
Ajouter le résultat dans votre panierSurfactant concepts redesigned / Silfredo Javier Bohorquez in EUROPEAN COATINGS JOURNAL (ECJ), N° 9 (09/2017)
[article]
Titre : Surfactant concepts redesigned : New water-borne urethane acrylic technology for basecoats Type de document : texte imprimé Auteurs : Silfredo Javier Bohorquez, Auteur ; Dirk Mestach, Auteur Année de publication : 2017 Article en page(s) : p. 20-25 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Automobiles -- Revêtements
Copolymère uréthane acrylique
Copolymères -- Synthèse
Essais de résilience
Polymérisation en émulsion
Primaire (revêtement)
Revêtements en phase aqueuse -- Additifs
Surfactants
Test d'immersionIndex. décimale : 667.9 Revêtements et enduits Résumé : The surfactants required in emulsion polymerisation often impair resistance properties in the final coating. 'Urethane emulsifiers' can copolymerise with vinyl monomers but the high crosslinking level can be problematic. Novel PU stabilisers with lower crosslinking were used to create urethane acrylic hybrid dispersions. These performed well in several standard automotive coating tests. Note de contenu : - Surfactant evolution in emulsion polymerisation
- Improving the performance of urethane emulsifiers
- Polyurethane-acrylic hybrid synthesis
- Three variants compared with commercial products
- Test formulation and application
- Good results in water soak and humidity tests
- Stone chip resistance is close to PUD control
- FIGURES : 1. First step in forming urethane crylic hydrid : synthesis of a (meth)acryloyl-functional polyurethane macro-monomer in monomers as temporary 'solvent' - 2. Second step in forming urethane acrylic hybrid : emulsion polymerisation - 3. Loss of gloss after water immersion at 40°C and 63°C - 4. Loss of gloss after humidity test for 240 h at 40°C
- TABLES : 1. Binder properties summarised - 2. Guide formulation for the preparation of the silver metallic basecoats - 3. Surface appearance after water immersion (48 hours) and humidity (7 days) tests. Rating system : 1 = 0K, 5 = not OKEn ligne : https://drive.google.com/file/d/1sR85-TXvKiSkd0xkFPkuNfvu73OWTBwS/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29033
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2017) . - p. 20-25[article]Réservation
Réserver ce document
[article]
Titre : The devil is in the detail : When manufacturing epoxy resin hardeners with specific properties, the amines used need to form adducts, involving adding compounds. Using the current technique in accordance with REACH, this produces, new substances that need to be registered accordingly Type de document : texte imprimé Auteurs : Klaus Reinhold, Auteur Année de publication : 2017 Article en page(s) : p. 30-31 Langues : Anglais (eng) Catégories : Amines Une amine est un composé organique dérivé de l'ammoniac dont certains hydrogènes ont été remplacés par un groupement carboné. Si l'un des carbones liés à l'atome d'azote fait partie d'un groupement carbonyle, la molécule appartient à la famille des amides. Découvertes en 1849, par Wurtz les amines furent initialement appelées alcaloïdes artificiels.
On parle d'amine primaire, secondaire ou tertiaire selon que l'on a un, deux ou trois hydrogènes substitués.
Par exemple, la triméthylamine est une amine tertiaire, de formule N(CH3)3.
Typiquement, les amines sont obtenues par alkylation d'amines de rang inférieur. En alkylant l'ammoniac, on obtient des amines primaires, qui peuvent être alkylées en amines secondaires puis amines tertiaires. L'alkylation de ces dernières permet d'obtenir des sels d'ammonium quaternaire.
D'autre méthodes existent : 1. Les amines primaires peuvent être obtenues par réduction d'un groupement azoture, 2. Les amines peuvent aussi être obtenues par la réduction d'un amide, à l'aide d'un hydrure, 3. L'amination réductrice permet l'obtention d'amines substituées à partir de composés carbonylés (aldéhydes ou cétones), 4. Les amines primaires peuvent être obtenues par la réaction de Gabriel.
Chimie industrielle -- Législation -- Pays de l'Union européenne
EpoxydesIndex. décimale : 667.9 Revêtements et enduits Résumé : The author discusses the resulting problems, possible consequences and ways forward. The sales manager construction chemicals at Worlee-Chemie GmbH also expands on the problems and chances of adapting REACH in the construction chemicals sector. En ligne : https://drive.google.com/file/d/1paNcT1g2O1W6ZNE-TB_NrMrCtJLpASyf/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29034
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2017) . - p. 30-31[article]Réservation
Réserver ce document
[article]
Titre : Growing monomer appeal : Developing more sustainable binders for wood coatings Type de document : texte imprimé Auteurs : Esra Bay, Auteur ; Peter Mueller, Auteur ; Simon Austin, Auteur Année de publication : 2017 Article en page(s) : p. 32-38 Langues : Anglais (eng) Catégories : Auto-réticulation
Bois -- Vernis
Chimie écologique
Dispersions et suspensions
Formulation (Génie chimique)
Monomères
Polyacryliques
Résistance chimique
Vernis en phase aqueuseIndex. décimale : 667.7 Cires, laques, vernis Résumé : Two 'renewable' monomers were evaluated as replacements for standard monomers in a self-crosslinking core-shell acrylic dispersion resin. The substituted materials polymerised without problems. Properties of clear and white industrial wood finishes were compared with those of a reference acrylic dispersion. Note de contenu : - The evolution of greener binders
- Green variations on a waterborne acrylic dispersion
- How the substitutions affected MFFT and hardness
- Evaluation of formulated coating properties
- Chemical resistance is slightly reduced overall
- Good results achieved, further optimisation desirable
- FIGURES : 1. Structure of IBOMA (Isobornyl methacrylate) monomer and 2-OA (2-octyle acrylate) monomer - 2. Coalescent demand comparison of prototypes and reference acrylic (200 µm wet film thickness) - 3. Hardness development comparison of prototypes and Competitor Acrylic (200 µm wet film thickness, polymer and coalescent only) - 4. Gloss performance in clear coat and opaque white formulations - 5. Hardness development in clear coat formulation (200 µm wet film thickness) - 6. Hardness development of reference acrylic and renewable prototypes in opaque white formulation ( 200 µm wet film thickness) - 7. Chemical resistance in clear coat formulation (based on 2 x 200 µm wet film thickness) - 8. Chemical resistance in opaque white formulation (based on 2 x 200 µm wet film thickness)
- TABLES : 1. Properties of the monomers used - 2. Comparison of basic properties of reference acrylic and derived prototypes - 3. Comparison of measured MFFT values and water uptake properties of prototypes and competitor acrylic - 4. Formulations of clear coat and opaque white woodfinishes - 5. Pencil hardness comparison of reference acrylic and prototype based on 200 µm wet film thickness on glassEn ligne : https://drive.google.com/file/d/1LCd-teHyB8N-ybr-DQmdVMRXGAl6L2GW/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29035
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2017) . - p. 32-38[article]Réservation
Réserver ce document
[article]
Titre : Milling tailored to its task : Pre-dispersion improves product quality and reduces costs Type de document : texte imprimé Auteurs : Norbert Kern, Auteur Année de publication : 2017 Article en page(s) : p. 40-44 Langues : Anglais (eng) Catégories : Broyage par voie humide
Broyeurs à billes
Encre
Pigments
Procédés de fabricationIndex. décimale : 667.9 Revêtements et enduits Résumé : In four practical examples it is shown that the use of a pre-dispersion step can increase the efficiency of fine grinding by up to 50%. With effective pre-dispersion it can be possible to use finer grinding beads to improve pigment grinding, quality and energy consumption. Note de contenu : - Higher productivity in manufacturing packaging inks
- Removing contaminants improves textile ink milling
- Process safety enhanced in agrochemical production
- Printing ink quality improved
- Why smaller beads give finer results
- Bead sizes can be optimised to specific processes
- FIGURES : 1. Typical grinding beads : yttrium-stabilised ZrO2 beads with a diameter of 0.8 mm - 2. Solids dosing during recirculation - 3. Example of a compact process solution for pre-dispersion and fine grinding - 4. Agitated bead mill for use with micro-grinding beadsEn ligne : https://drive.google.com/file/d/13ztcWUgWuwC0Yi8pj3CdN48svAIPI7qA/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29036
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2017) . - p. 40-44[article]Réservation
Réserver ce document
[article]
Titre : Eco-shield for paints : Multifunctional organoclay composition offers clean-tech protection Type de document : texte imprimé Année de publication : 2017 Article en page(s) : p. 48-53 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Antimicrobiens -- Suppression ou remplacement
Argile
Essais accélérés (technologie)
Essais dynamiques
Hydrophilie
Hydrophobie
Protection contre le rayonnement ultraviolet
Résistance à la compression
Revêtements -- Additifs
Revêtements -- Analyse
Revêtements -- Propriétés mécaniques
Revêtements en bâtiment
SmectiteIndex. décimale : 667.9 Revêtements et enduits Résumé : Current and future restrictions on biocides are forcing manufacturers of building finishing materials to seek alternative products. A novel multifunctional organoclay additive has been developed by focusing on mineral materials that control coating degradation and which can be used in bulding or finishing materials such as plasters, mortars, primers, paints and other protective or decorative coatings. Note de contenu : - Smectite clay to improve functionality
- Clean technology for novel organoclay
- Hydrophobic and hydrophilic functionality
- UV protection
- Zero-leaching product safe to use
- Added benefits indicate potential for broader application
- FIGURES : 1. Intercalation of organic surfactant between layers of clay considerably increases the basal spacing of the layer (d) < d2) and also changes the clay surface properties from hydrophilic to hydrophobic - 2. X-ray powder diffraction data for mechanochemically modified SWy-2 with different aliphatic quaternary ammonium salts (carbon chaing length varies from C8 to C18) - SEM pictures of raw and mechanochemically organophilised SWy-2 particle aggregates - 4. The total colour difference of CIELAB versus the non-treated part on the sample - 5. The tested compression strength of the samples - 6. The tested tension strength of the samples - 7. The appearance of the traditional lime paint after the 6 month field test exposureEn ligne : https://drive.google.com/file/d/1sqz_V8klcwBLUxcSvWprvOMk1NPEIcZ-/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29037
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2017) . - p. 48-53[article]Réservation
Réserver ce document
[article]
Titre : Aqueous over high-solid Type de document : texte imprimé Année de publication : 2017 Article en page(s) : p. 28-26 Langues : Anglais (eng) Catégories : Automobiles -- Revêtements:Automobiles -- Peinture
Dispersions et suspensions
Liants
Pigments
Produits commerciaux
Revêtements (produits chimiques):Peinture (produits chimiques)Index. décimale : 667.9 Revêtements et enduits Résumé : Pigments generally come up when talking about the colour and effects of autmotive paints. However, they need the right environment to fulfil their task. This overview presents a small selectionof binders and dispersions for automotive base paints that provide this environment. En ligne : https://drive.google.com/file/d/1ykFsGSz2GmpOF-Ib-_KSC1l_sTml5JtL/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32947
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2017) . - p. 28-26[article]Réservation
Réserver ce document