Accueil
Détail de l'auteur
Auteur Dirk Mestach
Commentaire :
Nuplex Resin BV - Bergen Op Zoom - The Netherlands
|
Documents disponibles écrits par cet auteur
Ajouter le résultat dans votre panier Affiner la recherche
[article]
Titre : Blends and hybrids : New waterborne acrylic and/or polyurethane dispersion binders for VOC compliant parquet coatings Type de document : texte imprimé Auteurs : Dirk Mestach, Auteur Année de publication : 2007 Article en page(s) : p. 156-161 Note générale : Bibliogr. Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Résumé : Wood coatings - A look at the cross-linking chemistry behind the waterborne binders developed for use in VOC-complaint environmentaly friendly parquet-coatings.The binders have an acrylic or a polyurethane backbone or can be hybrid of both.High performance parquet coatings systems both both for professional or do-it-yourself application, can be formulated using these binders. En ligne : https://drive.google.com/file/d/1r48ZO3IKbcuG_CAEPH1mfxibF3RvncHD/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8399
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 05/2007 (05/2007) . - p. 156-161[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 007143 - Périodique Bibliothèque principale Documentaires Disponible Compliant technology for coatings / Dirk Mestach in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 198, N° 4521 (02/2008)
[article]
Titre : Compliant technology for coatings Type de document : texte imprimé Auteurs : Dirk Mestach, Auteur ; Jan Goossen, Auteur ; Richard Esser, Auteur ; Jaap Akkerman, Auteur Année de publication : 2008 Article en page(s) : p. 28-31 Langues : Anglais (eng) Catégories : Formulation (Génie chimique)
Haut extrait sec
Polyalkydes
Réduction des composés organiques volatils
Revêtements décoratifs:Peinture décorative
Revêtements en phase aqueuse:Peinture en phase aqueuseIndex. décimale : 667.9 Revêtements et enduits Résumé : Steps that the compagny is following for the development of VOC-compliant solventborne trim paints.
Within the EU, there is considerable focus on reducing the emissions of volatile organic compounds (VOCs). As a result of the Solvents Emission Directive, VOC emissions have been considerably reduced as of January 1, 2007 and a further reduction of allowable VOCs is dues as of 2010. These limiting values are applicable for decorative coatings that are not applied in installations where emission can be controlled.
The emission reductions needed by 2010 can only be achieved by the use of waterborne or high solids solventborne products. As most of the wall paints are already waterborne, special attention has to be given to trim paints, varnishes, primers and performance coatings.Note de contenu : - European VOC legislation
- High solids soventborne resins
- TABLES : 1. Maximum VOC levels (g/l) per product category - 2. Resin properties - 3. Paint formulations - 4. Paint parameters - 5. Comparison of gloss levels
- FIGURES : 1. High solids alkyd raw materials and functionality 2. Normally the alkyd resin consists of a linear polyester backbone with pendant fatty acid chains. The new generation of alkyds, however, has strongly branched polymer backbone - 3. BK-drying comparison between different high solids enamels - 4. Comparison of hardness build-up as a function of drying time - 5. Comparison between the VOC properties of alkyd C, with and without reactive diluent alkyd A and a conventional fatty acid based alkyd - 6. BK-drying of alkyd C compared to blend of alkyds C ane A (80:20) - 7. Hardness build-up for alkyd C and blends with alkyds A with and without optimised drier compositionEn ligne : https://drive.google.com/file/d/1586VQg6tnoNzWA0NpK9yzrvD7s8yTg4j/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27231
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 198, N° 4521 (02/2008) . - p. 28-31[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010094 - Périodique Bibliothèque principale Documentaires Disponible Core-shell emulsification updated / Ahmed Maqsood in EUROPEAN COATINGS JOURNAL (ECJ), N° 9 (09/2016)
[article]
Titre : Core-shell emulsification updated : High performance acrylic binders for decorative and flooring use Type de document : texte imprimé Auteurs : Ahmed Maqsood, Auteur ; Michael Mattingly, Auteur ; Ken Weaver, Auteur ; Dirk Mestach, Auteur Année de publication : 2016 Article en page(s) : p. 36-41 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Core-Shell
Emulsifiants
Essais (technologie)
Liants
Oligomères
Polymérisation en émulsion
Rhéologie
Stabilisants (chimie)
SurfactantsIndex. décimale : 667.9 Revêtements et enduits Résumé : Nuplex has developed a novel core/shell emulsification process in which the shell initially functions as a nucleating site and then as an in-situ stabiliser. Good performance properties can be combined with a low minimum film formation temperature (MFFT) and near-Newtonian rheology. Note de contenu : - The role of surfactants in emulsion polymerisation
- Reactive/oligomeric stabilizers to improve coatings properties
- How core-shell technology improves coating properties
- Novel core-shell process gives greater versatility
- Rheological evaluation
- Basic performance tests show good results
- Floor coatings pass specific resistance testsEn ligne : https://drive.google.com/file/d/1NLwykxM3TjXlTpBMqN5Iv_rX1-yooxK5/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26950
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 9 (09/2016) . - p. 36-41[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18330 - Périodique Bibliothèque principale Documentaires Disponible Development of topcoat formulations to extend the open time of waterborne coatings / Wouter M. J. Kloosterman in SURFACE COATINGS INTERNATIONAL, Vol. 106.4 (07-08/2023)
[article]
Titre : Development of topcoat formulations to extend the open time of waterborne coatings Type de document : texte imprimé Auteurs : Wouter M. J. Kloosterman, Auteur ; Ankie P. M. van Gorkum, Auteur ; Dirk Mestach, Auteur Année de publication : 2023 Article en page(s) : p. 280-284 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Blanc (couleur)
Formulation (Génie chimique)
Polyacrylates
Polymères -- Synthèse
Revêtements -- Finition
Revêtements en phase aqueuseIndex. décimale : 667.9 Revêtements et enduits Résumé : The substitution of solvent-based trim paints by more environmentally friendly waterborne products progresses rather slowly. One of the reasons for this is the limited window of workability of waterborne coating formulations compared to their solventborne equivalents. The limited application window of waterborne coating systems originates from the disperse nature of the resins used and the quick rise in viscosity when the critical particle stacking is reached. Consequently, the time in which irregularities in a freshly applied coating layer can be repaired without resulting in brush marks, commonly referred to as the open time, is rather short. Also, it is not uncommon with waterborne coatings to apply two or three layers to improve the coverage and hiding. The practical open time of aqueous coatings is, however, much shorter for the second layer than for the first and needs to be improved. This paper describes the work done to improve the open time of an aqueous white topcoat formulation in both the first and the second coating layer. Note de contenu : - MATERIALS AND METHODS : Synthesis of polyacrylate dispersion A - Synthesis of polymeric open time extending resin B - Synthesis of polymeric open time extending dispersion C
- PREPARATION OF WHITE PIGMENTED TOPCOAT FORMULATIONS 1-3
- OPEN TIME DETERMINATION METHOD
- Table 1 : Composition of white topcoat formulations (with component ratio of binder given in figure 2)
- Table 2 : Characteristic parameters of the synthesised polymeric resins
- Table 3 : General coating properties of the dry white topcoat formulations 1-3En ligne : https://drive.google.com/file/d/1p3bh7ZlH_YBE2EwNZ7_m-c9hN-8EzSMo/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39816
in SURFACE COATINGS INTERNATIONAL > Vol. 106.4 (07-08/2023) . - p. 280-284[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24176 - Périodique Bibliothèque principale Documentaires Disponible Film formation and crosslinking of waterborne two-component coatings containing quaternized ammonium groups / Silfredo Javier Bohorquez in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 6 (11/2019)
[article]
Titre : Film formation and crosslinking of waterborne two-component coatings containing quaternized ammonium groups Type de document : texte imprimé Auteurs : Silfredo Javier Bohorquez, Auteur ; Dirk Mestach, Auteur Année de publication : 2019 Article en page(s) : p. 1597-1907 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Amines Une amine est un composé organique dérivé de l'ammoniac dont certains hydrogènes ont été remplacés par un groupement carboné. Si l'un des carbones liés à l'atome d'azote fait partie d'un groupement carbonyle, la molécule appartient à la famille des amides. Découvertes en 1849, par Wurtz les amines furent initialement appelées alcaloïdes artificiels.
On parle d'amine primaire, secondaire ou tertiaire selon que l'on a un, deux ou trois hydrogènes substitués.
Par exemple, la triméthylamine est une amine tertiaire, de formule N(CH3)3.
Typiquement, les amines sont obtenues par alkylation d'amines de rang inférieur. En alkylant l'ammoniac, on obtient des amines primaires, qui peuvent être alkylées en amines secondaires puis amines tertiaires. L'alkylation de ces dernières permet d'obtenir des sels d'ammonium quaternaire.
D'autre méthodes existent : 1. Les amines primaires peuvent être obtenues par réduction d'un groupement azoture, 2. Les amines peuvent aussi être obtenues par la réduction d'un amide, à l'aide d'un hydrure, 3. L'amination réductrice permet l'obtention d'amines substituées à partir de composés carbonylés (aldéhydes ou cétones), 4. Les amines primaires peuvent être obtenues par la réaction de Gabriel.
Epoxydes
Formation de film
Polymères en émulsion
Revêtements bi-composant
Revêtements en phase aqueuse -- Séchage
Revêtements organiques
Revêtements sans isocyanatesIndex. décimale : 667.9 Revêtements et enduits Résumé : A study was done to investigate the crosslinking and film formation of a waterborne two-component system consisting of an aqueous epoxy functional dispersion and tertiary amine functional polymer dispersions. Techniques used were Fourier transform infrared, atomic force microscopy, environmental scanning electron microscopy, dynamic mechanical thermal analysis, and energy-dispersive X-ray spectroscopy. Next to covalent crosslinking, it was also demonstrated that the crosslinks, containing quaternized ammonium groups, cluster together to form “nest-like” structures in the bulk of the crosslinked film. Note de contenu : - EXPERIMENTAL METHOD AND MATERIALS : Synthesis of amino-functionalized dispersions by means of emulsion polymerization - Characterization of nonpigmented films - Film formation study using scanning electronic microscopy
- RESULTS AND DISCUSSION : Film performance and crosslinking kinetics - Film microstructure analysis by ESEMDOI : 10.1007/s11998-019-00251-0 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-019-00251-0.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33412
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 16, N° 6 (11/2019) . - p. 1597-1907[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21321 - Périodique Bibliothèque principale Documentaires Disponible Green wood protection / Dirk Mestach in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 194, N° 4477 (06/2004)
PermalinkHigh-throughput paint optimisation by use of a pigment-dispersing polymer / Silfredo Javier Bohorquez in SURFACE COATINGS INTERNATIONAL, Vol. 98.2 (04/2015)
PermalinkInorganic nanoparticles as functional additives in water-borne coatings / Dirk Mestach in SURFACE COATINGS INTERNATIONAL. PART A : COATINGS JOURNAL, Vol. 88, A08 (10/2005)
PermalinkPermalinkMeeting IKEA R1 requirements for coatings / Dirk Mestach in EUROPEAN COATINGS JOURNAL (ECJ), N° 12 (12/2022)
PermalinkPermalinkNew developments in waterborne printing inks for non-absorbing substrates / Anton de Krom in PAINTINDIA, Vol. LII, N° 2 (02/2002)
PermalinkNew resin development for future green paints / Jaap Akkerman in PAINTINDIA, N° spécial (02/2002)
PermalinkNew solvent-free polyurethane and urethane acrylic dispersions / Dirk Mestach in DOUBLE LIAISON, N° 557 (07/2007)
PermalinkNovel approach to preventing the migration of tannins in water-borne wood applications / Derrick R. Twene in SURFACE COATINGS INTERNATIONAL. PART A : COATINGS JOURNAL, Vol 87, A09 (11/2004)
PermalinkPermalinkRe-engineering resins and paints / Silfredo Javier Bohorquez in EUROPEAN COATINGS JOURNAL (ECJ), N° 1 (01/2017)
PermalinkResins for water-borne coatings / Jaap Akkermann / Hannover [Germany] : Vincentz Network GmbH & Co. (2021)
PermalinkSelecting the right binder / Dirk Mestach in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 202, N° 4571 (04/2012)
PermalinkSurfactant concepts redesigned / Silfredo Javier Bohorquez in EUROPEAN COATINGS JOURNAL (ECJ), N° 9 (09/2017)
Permalink