Accueil
Résultat de la recherche
3 résultat(s) recherche sur le tag 'strength'
Ajouter le résultat dans votre panier Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche
Application of the Flory–Rehner equation and the Griffith fracture criterion to paint stripping / Stuart G. Croll in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 1 (01/2010)
[article]
Titre : Application of the Flory–Rehner equation and the Griffith fracture criterion to paint stripping Type de document : texte imprimé Auteurs : Stuart G. Croll, Auteur Année de publication : 2010 Article en page(s) : p. 49-55 Note générale : Bibliogr. Langues : Américain (ame) Tags : Stripping Swelling Solvent Internal stress Flory–Huggins Griffith Adhesion Fracture strength Index. décimale : 667.9 Revêtements et enduits Résumé : Chemical paint stripping is a part of paint technology that is very necessary but for which quantitative understanding has been comparatively unexplored. Traditional paint strippers were based on very effective solvents, such as dichloromethane, that are now recognized as being dangerous for people and the environment. Optimal replacement by environmentally sound, and effective, paint strippers requires a better understanding of the action of the traditional materials. This communication links the stripping of cured paint films by aggressive solvents to the effect that swelling has on the cohesive and adhesive properties of a crosslinked polymer network. Swelling, described by the well-known Flory–Rehner equation, can be used to estimate the reduction in strength of the coating film. Thus, its resistance to fracture, described by the Griffith equation, is decreased so that the swelling stresses cause severe weakening and sometimes spontaneous removal. The equations lead to a description that fits well with common experience and so may be useful in selecting materials for future, less toxic, and more easily disposed, stripping formulations. DOI : 10.1007/s11998-009-9166-4 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-009-9166-4.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8346
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 7, N° 1 (01/2010) . - p. 49-55[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011962 - Périodique Bibliothèque principale Documentaires Disponible Effect of heat treatment on microstructure and mechanical properties of cold sprayed Ti coatings with relatively large powder particles / W.-Y. Li in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 6, N° 3 (09/2009)
[article]
Titre : Effect of heat treatment on microstructure and mechanical properties of cold sprayed Ti coatings with relatively large powder particles Type de document : texte imprimé Auteurs : W.-Y. Li, Auteur ; C. Zhang, Auteur ; H. Liao, Auteur ; C. Coddet, Auteur Année de publication : 2009 Article en page(s) : p. 401-406 Note générale : Bibliogr. Langues : Américain (ame) Tags : Cold spraying Vacuum heat treatment Titanium Microstructure Microhardness Adhesive strength Index. décimale : 667.9 Revêtements et enduits Résumé : In this study, the effect of post-spray heat treatment on the microstructure, microhardness, and adhesive strength of the cold-sprayed Ti coating was investigated. It was found that a thick and relatively porous Ti coating was deposited by cold spraying. The coating surface layer presented a more porous structure. The microhardness of the as-sprayed Ti coating was slightly higher compared to pure Ti bulk, owing to the work hardening effect during deposition. After annealing at 850°C for 4 h under vacuum condition, the Ti coating also presented a porous structure with more uniformly distributed small pores. A metallurgical bonding between the deposited particles was formed through annealing treatment. The adhesive strength of coating was significantly improved after annealing. The microhardness of the annealed Ti coating was also increased. DOI : 10.1007/s11998-008-9133-5 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-008-9133-5.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=6121
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 6, N° 3 (09/2009) . - p. 401-406[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011503 - Périodique Bibliothèque principale Documentaires Disponible Moisture retention in a (in vitro) porcine skin substrate / S. T. Adamy in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 25, N° 6 (12/2003)
[article]
Titre : Moisture retention in a (in vitro) porcine skin substrate Type de document : texte imprimé Auteurs : S. T. Adamy, Auteur Année de publication : 2003 Article en page(s) : p. 285-293 Note générale : Bibliogr. Langues : Anglais (eng) Tags : Dermal Phase Meter Ionic strength Moisturization Porcine skin Index. décimale : 668.5 Parfums et cosmétiques Résumé : Des échantillons de modèles de peau de porc ont été évalués dans leur capacité de rétention d'humidité après divers traitements cosmétiques. Cette dernière a été évaluée par deux méthodes – par le Nova™ Dermal Phase Meter (DPM) et par des mesures de perte de poids au cours de l'évaporation de l'humidité. Dans les deux mesures, les échantillons de peau ont été placés dans des environnements d'air. Bien qu'il soit rare que la peau soit soumise in vivo à de telles conditions de sécheresse, l'évaluation s'est avérée utile en différenciant les facteurs affectant les deux types de mesures, et en différenciant les types de traitements. Dans les expériences préliminaires de la méthode de DPM, il a été constaté que le niveau de DPM, habituellement attribué au niveau d'humidité de la peau, était fortement sensible à la concentration ionique du traitement de peau. Les échantillons traités avec les solutions les plus concentrées en sel montraient des niveaux plus élevés de DPM. On a également constaté que la durée du signal de DPM, durant la perte d'humidité de l'échantillon de peau, restait relativement constante malgré les changements de concentration ionique. Cette durée pourrait ainsi être utilisée comme mesure du point à partir duquel la peau maintient son humidité dans un environnement. Un certain nombre de mesures de la durée de DPM ont été effectuées sur des échantillons de peau traités avec des mélanges simples et des produits formulés plus complexes. Les durées ont été trouvées corrélées avec les taux de perte d'eau déterminées par les mesures gravimétriques. DOI : 10.1111/j.1467-2494.2003.00197.x En ligne : https://onlinelibrary.wiley.com/doi/10.1111/j.1467-2494.2003.00197.x Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=4730
in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE > Vol. 25, N° 6 (12/2003) . - p. 285-293[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 004001 - Périodique Bibliothèque principale Documentaires Disponible