Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Evaluation of dye fixatives - A comparative study / Victor John Sundar in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVI, N° 4 (04/2021)
[article]
Titre : Evaluation of dye fixatives - A comparative study Type de document : texte imprimé Auteurs : Victor John Sundar, Auteur ; Chellappa Muralidharan, Auteur Année de publication : 2021 Article en page(s) : p. 135-140 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Colorants acides
Complexes métalliques
Croûte (cuir)On entend par "cuir en croûte" des cuirs ayant subi les opérations jusqu'au tannage, à l'exclusion de toute opération de corroyage ou de finissage, mais qui, par opposition aux wet-blue ont été séchés.
Cuirs et peaux -- Propriétés mécaniques
Cuirs et peaux -- Teinture
Essais dynamiques
Fixateurs (chimie)
Fixation (chimie)
Solidité de la couleurIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : Dyeing is the important unit process in leather manufacturing, which adds value to the leather. Although formic acid is used for fixing of dyes in leather processing, difficulties do arise in fixation of certain dye stuffs. Further high quantities of formic acid used do create health issues and adds to high cost of production. Compounds such as formic acid, acetic acid, mixture of organic acids and quaternary ammonium compounds have been found to function as dye fixatives. The efficacy of these compounds to function as dye fixatives for various dye stuffs and substances either alone or along with formic acid has been studied in detail in this work. The physical and color characteristics of leather and spent liquor analysis have been carried out. Note de contenu : - EXPERIMENTAL : Preparation of leather samples - Exhaustion studies - Colorvalue of dyed crust leathers - Color fastness - Physical testing of leather
- RESULTS AND DISCUSSION : Exhaustion of dyes - Color value of dyed crust leathers - Physical strength characteristics of leathers - Fastness properties of leather
- Table 1 : Types of fixing
- Table 2 : Spent liquor exhaustion
- Table 3 : Acid dyes
- Table 4 : Direct dyes
- Table 5 : Metal complex dyes 1:1
- Table 6 : Metal complet dyes 1:2
- Table 7 : Fastness properties of leather (direct dye)
- Table 8 : Fastness properties of leather (acid dye)
- Table 9 : Fastness properties of leather (metal-complex dye 1:1)
- Table 10 : Fastness properties of leather (metal-complex dye 1:2)DOI : https://doi.org/10.34314/jalca.v116i4.4285 En ligne : https://drive.google.com/file/d/1jmfaOkeJpU2fCJCfEYLSbvUscJ78jGd2/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=35687
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXVI, N° 4 (04/2021) . - p. 135-140[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22710 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Examen du pouvoir d'unisson de colorants anioniques Type de document : texte imprimé Auteurs : M. Dien, Auteur Année de publication : 1977 Article en page(s) : p. 111-120 Note générale : Bibliogr. Langues : Français (fre) Catégories : Colorants acides
Cuirs et peaux -- Finition
Cuirs et peaux -- Teinture
SpectrophotométrieIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : L'unisson est sans aucun doute une des plus grandes difficultés qu'ait a résoudre un technicien du finissage. Le jugement très subjectif de l'unisson variant d'un observateur à l'autre, l'auteur propose une méthode d'examen du pouvoir d'unisson des colorants anioniques qui constitue une variante des travaux de Ricketts et repose sur la colorimétrie de rémission et l'analyse statistique. Note de contenu : - PROCESSUS D'UNISSON
- COMMENT JUGER DE L'UNISSON ? : Principe de l'évaluation - Appareillage utilisé pour la mesure - Evaluation des résulats
- MODE OPERATOIRE : Colorants - Paramètres de teinture - teinture
- ANALYSE DES RESULTATS : Substrat à haute affinité - Substrat de basse affinité
- METHODE D'EXAMEN SIMPLIFIEE
- REMARQUESEn ligne : https://drive.google.com/file/d/1w4Bpf9cD-brxNkJwXke0FaNIGOGCHDuP/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39358
in TECHNICUIR > N° 6 (06-07/1977) . - p. 111-120[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 009107 - Périodique Bibliothèque principale Documentaires Disponible Exposés scientifiques et techniques pour la fabrication du cuir / Badische Anilin und Soda-Fabrik (Ludwigshafen am Rhein, Germany) / Ludiwigshafen am Rhein [Germany] : BASF (nd)
Titre : Exposés scientifiques et techniques pour la fabrication du cuir Type de document : texte imprimé Auteurs : Badische Anilin und Soda-Fabrik (Ludwigshafen am Rhein, Germany), Auteur Editeur : Ludiwigshafen am Rhein [Germany] : BASF Année de publication : nd Importance : 123 p. Présentation : ill. Format : 21 cm Note générale : Bibliogr. Langues : Français (fre) Catégories : Chrome
Colorants
Colorants acides
Composés aromatiques
Cuir
Cuirs et peaux -- Finition
Cuirs et peaux -- Teinture
Liaisons chimiques
Procédés de fabrication
Surfactants
TannageIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : Nous avons groupé dans la présente brochure plusieurs exposés publiés en langue française, afin d'éclaircir autant que possible sous divers aspects certains problèmes actuels de la technologie du cuir.
On y trouvera des résultats de la recherche fondamentale à côté de considérations d'ordre systématique, ainsi que des données intéressant directement les techniques d'application.
Notre intention a été de mettre à la disposition des spécialistes, sous une forme commode, ces différents exposés rédigés par notre Section du Cuir, et d'aider ainsi à une fructueuse coopération entre le praticien et le scientifique, le fabricant de cuir et ses fournisseurs.Note de contenu : - Avantages et désavantages des sels de chrome masqués pour le tannage du box et du cuir velours
- Produits auxiliaires pour la fabrication du cuir
- Sur les actions réciproques entre les différentes classes de composées tensio-actifs et les différentes sortes de cuir
- Les forces de liaison entre les colorants anioniques et le cuir
- Sur les propriétés fondamentales des matières colorantes
- Phénomènes de liaison entre corps aromatiques et fibres protéiques
- Différences et analogies dans la structure chimique des tanins synthétiques et de colorants pour cuirs
- Sur l'unisson dans la teinture du cuir
- Tannage et finissage des cuirs à dessus effleurés
- Le finissage du cuirPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36391 Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23005 675 EXP Monographie Bibliothèque principale Documentaires Disponible Improving the colour fastness of dyed nylon-6 fabric by graft copolymerisation and curing of acrylic acid / Farzad Mohaddes in COLORATION TECHNOLOGY, Vol. 132, N° 3 (06/2016)
[article]
Titre : Improving the colour fastness of dyed nylon-6 fabric by graft copolymerisation and curing of acrylic acid Type de document : texte imprimé Auteurs : Farzad Mohaddes, Auteur ; Stanley Fergusson, Auteur ; Lijing Wang, Auteur Année de publication : 2016 Article en page(s) : p. 249-254 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : acrylique, Acide L'acide acrylique ou acide acroléïque ou acide prop-2-énoïque est un composé organique de formule brute C3H4O2 et de formule semi-développée CH2=CHCOOH. C'est un acide carboxylique et un alcène vinylique, et se présente comme un liquide incolore à l'odeur âcre.
L'acide acrylique et ses esters, les acrylates, sont utilisés dans la fabrication de matières plastiques, dans les peintures acryliques et dans divers autres polyacryliques qui ont de multiples usages.
Colorants acides
Colorimétrie
Copolymères greffés
Polyamide 66
Solidité de la couleur
Teinture -- Fibres textiles synthétiques
Textiles et tissus -- Propriétés mécaniquesIndex. décimale : 667.3 Teinture et impression des tissus Résumé : The influence of grafting and grafting–curing of acrylic acid on the colour fastness of nylon-6 fabric dyed with an acid dye of low wash fastness was investigated. The variables involved in grafting were initially optimised for pristine nylon-6 fabric prior to grafting the same monomer onto the dyed fabrics. The highest graft yield achieved for the pristine and dyed nylon-6 fabrics was 44 and 14% respectively. Grey scale testing and colorimetric analysis revealed that the highest colour fastness and the smallest drop in colour strength belonged to the dyed–grafted–cured nylon-6 fabric. The colour components were measured, and the total colour difference of each sample after five washing cycles was computed. The specific colour difference showed that the implementation of either grafting or grafting–curing processes will alter the reference colour of the dyed fabric. The tensile strength of the grafted and grafted–cured fabrics was respectively 2.7 and 6.3% lower than that of dyed nylon-6. Note de contenu : - EXPERIMENTAL : Materials - Pretreatment of pristing nylon-6 fabric - Dyeing procedure - Optimisation of the grafting process - Graft copolymerisation of acrylic acid on dyed nylon-6 fabric - Curing procedure - Washing process - Colour measurements - Colour wash fastness - Determination of tensile strength
- RESULTS AND DISCUSSION : Effect of pretreatment of pristing nylon-6 fabric on the graft yield - Effect of cupric ion concentration - Effect of monomer concentration - Effect of potassium persulfate concentration - Effect of time and time and temperature - Fourier transform infrared analysis - Graft copolymerisation of dyed nylon-6 fabric - Colorimetric evaluation - Colour fastness - Determination of tensile strengthDOI : 10.1111/cote.12211 En ligne : https://drive.google.com/file/d/1sEe52YP9xur56xLv_mcowbiwAPr_1UR3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26357
in COLORATION TECHNOLOGY > Vol. 132, N° 3 (06/2016) . - p. 249-254[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18101 - Périodique Bibliothèque principale Documentaires Disponible Influence of liquor ratio and amount of dyestuff in producing ultradeep black dyeing using mercerised and cationised cotton / Sha Fu in COLORATION TECHNOLOGY, Vol. 132, N° 3 (06/2016)
[article]
Titre : Influence of liquor ratio and amount of dyestuff in producing ultradeep black dyeing using mercerised and cationised cotton Type de document : texte imprimé Auteurs : Sha Fu, Auteur ; Matthew Farrell, Auteur ; Peter Hauser, Auteur ; Mary Ankeny, Auteur Année de publication : 2016 Article en page(s) : p. 232-237 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Cationisation
Colorants -- Absorption
Colorants acides
Colorants réactifs
Colorimétrie
CotonLe coton est une fibre végétale qui entoure les graines des cotonniers "véritables"(Gossypium sp.), un arbuste de la famille des Malvacées. Cette fibre est généralement transformée en fil qui est tissé pour fabriquer des tissus. Le coton est la plus importante des fibres naturelles produites dans le monde. Depuis le XIXe siècle, il constitue, grâce aux progrès de l'industrialisation et de l'agronomie, la première fibre textile du monde (près de la moitié de la consommation mondiale de fibres textiles).
Eau -- Consommation -- Réduction
Essais (technologie)
Fibres végétales
Noir (couleur)
Solidité de la couleur
Teinture -- Fibres textilesIndex. décimale : 667.3 Teinture et impression des tissus Résumé : Cationised cotton allows the dyeing of cotton fabrics without salt and up to 100% anionic dye utilisation. The employment of cationised cotton in the dyeing of high depths of shades with reactive dyes holds marked potential for sustainable improvements through less dye consumption, decreased water usage, and zero salt utilisation, all while obtaining shade depths darker than possible with conventional reactive dyeings. This work builds upon previous work in obtaining ultradeep dyeings of cotton utilising cationised and mercerised cotton by investigating the effects of liquor ratio in dyeing and amount of dye applied. Surprisingly, for mercerised only cotton fabric, it was found that nearly equivalent depths of shade, as indicated by L*, were obtained, irrespective of the liquor ratio and the amount of CI Reactive Black 5 applied from 7% to 10% owf. However, the strengths of the dyeings, indicated by the K/S sum, show slight increases with increasing amounts of dye, but not when the liquor ratio is lowered. Similarly, for mercerised-cationised cotton, the liquor ratio had a negligible effect on the depth of shade obtained, but increasing the amount of CI Reactive Black 5 resulted in an increase in shade depth and colour strength. Very deep shades with high colour strength were obtained with mercerised-cationised cotton that were not obtainable with uncationised cotton, even at a very low liquor ratio and with a drastic increase in the amount of CI Reactive Black 5. Note de contenu : - EXPERIMENTAL : Materials - Application of cationic reagent - Dyeing - Colour measurement - Evaluation of dye uptake - Colour fastness tests
- RESULTS AND DISCUSSION : Dyeing of mercerised and mercerised-cationised cotton - Colorimetric values and colour strength - Dye uptake - Colour fastness propertiesDOI : 10.1111/cote.12216 En ligne : https://drive.google.com/file/d/11dY5arwofo31oRA6mFpgKihRoDM2fFnU/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26355
in COLORATION TECHNOLOGY > Vol. 132, N° 3 (06/2016) . - p. 232-237[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18101 - Périodique Bibliothèque principale Documentaires Disponible Influence of ultrasound on the adsorption, diffusion and kinetics of leather dyeing process : mechanistic insight / Venkatasubramanian Sivakumar in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 7 (07/2020)
PermalinkInfluence on rex rabbit hair by low-temperature plasma in different gas media / Zhang Meina in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 103, N° 2 (03-04/2019)
PermalinkInteraction of phenol red with cetyltrimethylammonium bromide in aqueous solution in COLORATION TECHNOLOGY, Vol. 131, N° 6 (12/2015)
PermalinkMicrocolumn adsorption studies of acid/basic dyes related to the physicochemical properties of the adsorbent / Unai Iriarte-Velasco in COLORATION TECHNOLOGY, Vol. 130, N° 1 (02/2014)
PermalinkN-Sulphonatoalkyl indophenine derivatives: Design, synthesis and dyeing properties on wool, silk and nylon fabrics / Jinfang Cai in COLORATION TECHNOLOGY, Vol. 137, N° 2 (04/2021)
PermalinkUne nouvelle approche de l'évaluation des caractéristiques d'unisson de teinture des colorants acides sur le cuir / M. Ricketts in TECHNICUIR, N° 10 (12/1975)
PermalinkA novel approach to the assessment of the level dyeing characteristics of acid dyes / R. H. Ricketts in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 58 (Année 1974)
PermalinkNovel methods for dyeing the epidermis of bamboo culms and their colour fastness / Min-Jay Chung in COLORATION TECHNOLOGY, Vol. 130, N° 2 (04/2014)
PermalinkOne-bath union dyeing of a modified wool/acrylic blend with acid and reactive dyes / Reda M. El-Shishtawy in COLORATION TECHNOLOGY, Vol. 127, N° 1 (2011)
PermalinkPlasma-photocatalytic degradation of dyeing wastewater : comparison of titanium oxide, zinc oxide, and graphene oxide / Doo Il Jang in COLORATION TECHNOLOGY, Vol. 130, N° 2 (04/2014)
PermalinkPrediction of recipes for cotton cationisation and reactive dyeing to shade match conventionally dyed cotton / Matthew J. Farell in COLORATION TECHNOLOGY, Vol. 130, N° 5 (10/2014)
PermalinkPreparation and assistant-dyeing of formaldehyde-free amphoteric acrylic retanning agent / Jian zhong Ma in JOURNAL OF LEATHER SCIENCE AND ENGINEERING, Vol. 3 (Année 2021)
PermalinkPreparation and characterisation of tannery solid waste as an alternative biosorbent for leather dyes / Bianca Mella in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 101, N° 3 (05-06/2017)
PermalinkPreparation of an ecofriendly chitosan–ZnO composite for chromium complex dye adsorption / Shanmugam Anandhavelu in COLORATION TECHNOLOGY, Vol. 129, N° 3 (06/2013)
PermalinkReactive dyeing of silk using commercial acid dyes based on a three-component Mannich-type reaction / Qing Guo in COLORATION TECHNOLOGY, Vol. 136, N° 4 (08/2020)
Permalink