Accueil
Catégories
> Thermodurcissables
ThermodurcissablesVoir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
More precision for sensitive fast curing compounds / Cordula Wieland in KUNSTSTOFFE INTERNATIONAL, Vol. 108, N° 12 (12/2018)
[article]
Titre : More precision for sensitive fast curing compounds : APC plus from kraussMaffei now available for thermosets Type de document : texte imprimé Auteurs : Cordula Wieland, Auteur ; Topic, Nicolina, Auteur ; Jan Hirz, Auteur Année de publication : 2018 Article en page(s) : p. 20-23 Langues : Anglais (eng) Catégories : Charges (matériaux)
Composites à fibres de verre
Contrôle de processus adaptatif
Matières plastiques -- Moulage par injection
ThermodurcissablesIndex. décimale : 668.4 Plastiques, vinyles Résumé : They offer high stiffness, are heat and chemically resistant and flow freely into the machine: we are not talking about high-performance thermoplastic resins such as PEEK or PPS, but thermoset polymers. For processing these challenging materials, the large series specialist Baumgarten automotive technics employs the APC plus machine function from KraussMaffei. As a result, rejects have fallen significantly. Note de contenu : - Less fluctuation in the cavity pressure signal
- Same OFT value - But different material behavior
- The volumetric filling of the cavity remains constant
- Parts with higher shot weights - trend and challenge
- Large-series application
- Fig. : Key to the vacuum pump cover is the absolutely flat functional surface. The challenge here is that the pronounced rib structure on the reverse side must not show through on the flat side. This can be solved by using PF thermoset compounds
- Fig. 1 : Precision parts with only 10 pm tolerance : the oil pump adjusting ring of PF (MD+GF) 70. Production has been running since 2014 in continuous three-shift operation on a CX200
- Fig. 2 : A 48-hour test (24 h without and 24h with APC plus) shows that the machine function significantly reduces the fluctuation band of the cavity pressure (NT = non-thermoplastics)
- Fig. 3 : The more highly filled, the lower is the material-specific compression curve. At 1000 bar pressure, the mass column of an organically filled PF is compressed by 3.7% ; at 80 % filling of glass fibers and mineral components, it is only 1,8%
- Fig. 4 : If the cylinder temperature rises by 2°C, and the mass becomes less viscous, APC plus switches to holding pressure at an earlier point and reduces the pressure level to prevent over-filling of the partEn ligne : https://drive.google.com/file/d/1QV1ov7Dn0AiQiI8JccYmAFGf_hIWyil4/view?usp=drive [...] Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31414
in KUNSTSTOFFE INTERNATIONAL > Vol. 108, N° 12 (12/2018) . - p. 20-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20464 - Périodique Bibliothèque principale Documentaires Disponible More stability increases attractiveness / Reinhard Schiffers in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 8 (08/2017)
[article]
Titre : More stability increases attractiveness : Optimized process control for injection molding of thermoset molding compounds Type de document : texte imprimé Auteurs : Reinhard Schiffers, Auteur ; Topic, Nicolina, Auteur Année de publication : 2017 Article en page(s) : p. 26-29 Note générale : - Disturbances in injection molding
- Process stabilization through adaptive closed-loop control systeme
- Thermoset processing perspectives
- FIGURES : 1. melt pressure and mold cavity pressure curves during the injection and holding pressure phases of two BMC UP (GF+MD) material types with various viscosity: with the same process settings, various pressure curves result, which indicates a different molded part filling - 2. Injection molding of polyester bulk molding compounds with nonreturn valve. In contrast, free-flowing thermoset materials are processed without nonreturn valve. Accordingly changes in viscosity cause the return flow behavior to fluctuate by means of the screw theads and the molded part filling - 3. Basic condition of the test series with BMC-polyester bulk molding compounds: CX 200-750 PolySet injection molding machine with AZ 100 automatic feed unitLangues : Anglais (eng) Catégories : Matières plastiques -- Moulage par injection
Polyesters
Pression -- Contrôle
Procédés de fabrication
ThermodurcissablesIndex. décimale : 668.4 Plastiques, vinyles Résumé : Their characteristic property profile makes thermosets attractive for many high-performance applications. Batch fluctuations, as well as process and environmental instability, produce disruptive effects in the injection molding of this highly filled, mold cross-linking material class, which have a direct impact on part quality. As part of the "QuaProDur" research project, alongside the Rosenheim University of Applied Sciences, the Deckerform Produktionssysteme GmbH tool manufacturer and the HBW-Gubesch Thermoforming GmbH plastic fabrication company (all located in Germany), KraussMaffei is optimizing the processing of thermoset molding compounds. En ligne : https://drive.google.com/file/d/1qtsLHOixZoEYbbMJAPI7pdZ82KbqQ53G/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29134
in KUNSTSTOFFE INTERNATIONAL > Vol. 107, N° 8 (08/2017) . - p. 26-29[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19181 - Périodique Bibliothèque principale Documentaires Disponible Natural fibre-based BMC enables sustainable lightweight construction / Thomas Lorenz in JEC COMPOSITES MAGAZINE, N° 125 (11-12/2018)
[article]
Titre : Natural fibre-based BMC enables sustainable lightweight construction Type de document : texte imprimé Auteurs : Thomas Lorenz, Auteur Année de publication : 2018 Article en page(s) : p. 26-27 Langues : Anglais (eng) Catégories : Composites à fibres végétales -- Recyclage
Coût -- Contrôle
Economies d'énergie
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
ThermodurcissablesIndex. décimale : 668.4 Plastiques, vinyles Résumé : Fire resistant, sprayable and ecologically friendly - Newly developed thermosets with natural fibre reinforcement lower production costs and help protect the environment. Note de contenu : - Flame retardant, moisture resistant and flexibly processable
- Eco-friendly and recyclable
- Fig. 1 : Cotton, jute or sisal : the new eco-firendly BMC by Lorenz Kunstsfofftechnik save energy during production by replacing standard glass fibres with natural materials. This gives the materials an outstandingly low carbon footprint and allows for ecologically friendly recycling or recovery
- Fig. 2 : Thanks to their low density, natural fibre-reinforced plastics are ilghter than even regular FRP without losing any of their rigidity and robustness, which can be fine-tuned even further by individual adjustments to the composition
- Fig. 3 : With a UL94 classification of VO for a 1.5 mm sample, the ecologically friendly materials achieve the highest fire protection class
- Fig. 4 : As BMC, le Lorenz eco-material composites can be produced not only through compression moulding, but also injection moulding allowing for more complex geometries to be produced as well
Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31728
in JEC COMPOSITES MAGAZINE > N° 125 (11-12/2018) . - p. 26-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20358 - Périodique Bibliothèque principale Documentaires Disponible Natural-fibre pultruded composites - a revolutionary new wood substitute / Sital Thakkar in JEC COMPOSITES MAGAZINE, N° 68 (10/2011)
[article]
Titre : Natural-fibre pultruded composites - a revolutionary new wood substitute Type de document : texte imprimé Auteurs : Sital Thakkar, Auteur Année de publication : 2011 Article en page(s) : p. 92 Langues : Anglais (eng) Catégories : Composites à fibres végétales
Construction -- Matériaux
ThermodurcissablesIndex. décimale : 620.19 Autres matériaux Résumé : The increasing global demand for sustainable wood substitutes has led an Indian company to develop a unique composite material that looks, feels and behaves like wood, with added advantages. It is made from renewable natural fibre and thermoset resin, and has an extremely low carbon footprint. Note de contenu : - A wood substitute
- A wide range of applications
- A pioneer in IndiaPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17336
in JEC COMPOSITES MAGAZINE > N° 68 (10/2011) . - p. 92[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13511 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Natural fine-tuning : Blending basalt fibers with plant fibers in thermoplastic and thermoset composites Type de document : texte imprimé Auteurs : Anjum Saleem, Auteur ; Luisa Medina, Auteur Année de publication : 2019 Article en page(s) : p. 45-48 Langues : Anglais (eng) Catégories : Chanvre et constituants Le chanvre ou chanvrier (Cannabis sativa L.) est la seule espèce du genre botanique Cannabis. Ce terme latin est souvent utilisé aussi comme nom vernaculaire pour distinguer les variétés de chanvre cultivé à usage industriel des variétés de cannabis à usage récréatif ou médical. C'est une espèce de plante annuelle, de la famille des Cannabaceae. La graine de chanvre s'appelle le chènevis.
Composites à fibres
Composites à fibres -- Propriétés mécaniques
Composites thermoplastiques
Fibres de basalte
Fibres de basalte -- Propriétés mécaniques
Fibres végétales
Fibres végétales -- Propriétés mécaniques
kénaf et constituantsLe Kenaf (Hibiscus Cannabinus L. et Hibiscus Sabdarifa L.), aussi appelé chanvre de Deccan, est une plante annuelle de la famille des Malvaceae.
Le kenaf est apparenté au jute. Ces tiges épineuses d'1 à 2 cm de diamètre sont souvent, mais pas toujours ramifiée. Les feuilles de 10 à 15 cm de longueur sont de forme variable, celles de la base sont lobées et celles du sommet lancéolées. Les fleurs de 8 à 15 cm de diamètre sont blanches, jaunes ou pourpres. Le fruit est un capsule contenant plusieurs graines.
Lin et constituantsLe lin cultivé (Linum usitatissimum) est une plante annuelle de la famille des Linaceae cultivée principalement pour ses fibres, mais aussi pour ses graines oléagineuses. Les fibres du lin permettent de faire des cordes, du tissu (lin textile pour ses qualités anallergiques, isolantes et thermorégulateurs), ou plus récemment des charges isolantes pour des matériaux de construction. Les graines sont utilisées pour produire de l'huile de lin pour l'industrie de l'encre et de la peinture, pour la consommation humaine et animale, à cause de sa richesse en oméga 3.
Le lin est une des rares fibres textiles végétales européennes. Elle a comme caractéristiques la légereté, la rigidité et la résistance et comme particularité d'être une fibre longue (plusieurs dizaines de centimètres), par rapport aux fibres courtes (coton, chanvre) ou moyennes (laine).
Morphologie (matériaux)
Polyacryliques
Polypropylène
ThermodurcissablesIndex. décimale : 668.4 Plastiques, vinyles Résumé : A blend of natural plant and inorganic fibers produces a composite with a very good property profile, without reducing the content of renewable raw materials. In this way, plant fibers such as kenaf or flax hybridized with basalt fibers can compete with glass fiber reinforcement as a low-cost, natural lightweight construction material. Note de contenu : - Basalt fibers for hybridization of natural plant fibers
- Mechanical characterization of the fibers
- Production of semi-finished products and mechanical characterization of the hybrid
- Morphological characterization
- Processing into components
- Figure : Natural plant and with PP hybridized fiber web after fiber alignment by carding
- Fig. 1 : Comparison of the specific flexural modulus shows that the PP-kenaf composite hybridized with 25% basalt fibers achieves significantly higher values
- Fig. 2 : Specific impact strength of the PP-kneaf composite hybridized with basalt fibers. The addition of 25% basalt fibers increases energy absorption by 45%
- Fig. 3 : Continuous improvement of the specific flexural modulus (stiffness) of the acrylic resin-kenaf/flax composite hybridized with basalt fibers was found with increasing addition of basalt fibers
- Fig. 4 : The scanning electron micrograph of the fracture surface of the PP-KE/BF composite shows pronounced fiber pull-out attributable to a poor fiber-matrix bond
- Fig. 5 : The smooth fibers apparent in the scanning electron micrograph of the fracture surface of the 100% PP-BF composite show that the basalt fiber size used is unsuitable for PP
- Fig. 6 : The scanning electron micrograph of the fracture surface of the acrylic-NF/BF composite shows a homogeneous fracture surface without individually pulled-out fibers
- Fig. 7 : Press molded components made from PP-NF and PP-basalt fibersEn ligne : https://drive.google.com/file/d/18AOtdDjBkEQ6DArNIURPTeyS3d66_8T3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32456
in KUNSTSTOFFE INTERNATIONAL > Vol. 109, N° 4 (04/2019) . - p. 45-48[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20880 - Périodique Bibliothèque principale Documentaires Disponible New waterborne coatings formulations with liquid EPDM dispersion / Gregory J. Brust in COATINGS TECH, Vol. 18, N° 8 (08/2021)
PermalinkNIR LEDs and NIR lasers as feasible alternatives / Christian Schmitz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 6 (11/2019)
PermalinkNovel composites based on natural fibres and thermosets / Günter Wuzella in JEC COMPOSITES MAGAZINE, N° 37 (12/2007)
PermalinkNovel multifunctional film-forming system / Michael Mosquera in PERSONAL CARE EUROPE, Vol. 7, N° 4 (06/2014)
PermalinkA novel stamp forming technique for crush-resistant stringers made of thermoplastic composites / Dusty Dequine in JEC COMPOSITES MAGAZINE, N° 76 (10-11/2012)
PermalinkNovel thermoset composites for more competitive and sustainable industries / Alaitz Rekondo in JEC COMPOSITES MAGAZINE, N° 136 (09-10/2020)
PermalinkNRC's multi-partner project on thermoset polyester/cellulosic fibre biocomposites / J. Denault in JEC COMPOSITES MAGAZINE, N° 83 (08-09/2013)
PermalinkParallel measurements and engineering simulations of conversion, shear modulus, and internal stress during ambient curing of a two-component epoxy coating / Qiong Li in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 5 (09/2022)
PermalinkPeintures en poudre thermodurcissables. Détermination de l'aptitude à la projection - Norme NF T 30-500 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1976)
PermalinkPeintures en poudre thermodurcissables. Détermination de la masse volumique au moyen d'un pycnomètre à air - Norme T 30-505 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1981)
PermalinkPeintures en poudre thermodurcissables. Détermination de la perte de masse à la cuisson - Norme T 30-503 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1977)
PermalinkPeintures en poudre thermodurcissables. Détermination du temps de gélification à une température donnée - Norme T 30-506 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1981)
PermalinkPeintures en poudre thermodurcissables. Evaluation de la stabilité au stockage - Norme T 30-507 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1981)
PermalinkPizza foaming - a delicious study from Naples / Emilia di Lorenzo in PLASTICS INSIGHTS, Vol. 113, N° 6 (2023)
PermalinkPlastiques. Analyse calorimétrique différentielle (DSC) - Partie 3 : Détermination de la température et de l'enthalpie de fusion et de cristallisation - Norme NF EN ISO 11357-3 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2013)
Permalink