Accueil
Catégories
> Transition de phase
En physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système. Transition de phase
Commentaire :
En physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système. Voir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Une peinture plus efficace que le béton in INDUSTRIE & TECHNOLOGIES, N° 992 (11/2016)
[article]
Titre : Une peinture plus efficace que le béton Type de document : texte imprimé Année de publication : 2016 Article en page(s) : p. 19 Langues : Français (fre) Catégories : Chaleur -- Récupération
Polymères
Revêtements:Peinture
Transfert d'énergie
Transition de phaseEn physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système.Index. décimale : 667.6 Peintures Résumé : La PME bretonne Protec Industries 22 est parvenue à insérer des matériaux à changement de phases (MCP) dans des peintures, tout en limitant leur épaisseur à 0,4 milimètre, soit une épaisseur comparable à celle d'une peinture classique. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27097
in INDUSTRIE & TECHNOLOGIES > N° 992 (11/2016) . - p. 19[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18425 - Périodique Bibliothèque principale Documentaires Disponible Un peu de finesse pour les peintures à changement de phase / Baptiste Cessieux in DOUBLE LIAISON, N° 614 (12/2016)
[article]
Titre : Un peu de finesse pour les peintures à changement de phase Type de document : texte imprimé Auteurs : Baptiste Cessieux, Auteur Année de publication : 2016 Article en page(s) : p. 8-9 Langues : Français (fre) Catégories : Biomatériaux
Peinture biosourcée
Revêtements en bâtiment:Peinture en bâtiment
Revêtements:Peinture
Transition de phaseEn physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système.Index. décimale : 667.6 Peintures Résumé : Les peintures à changement de phase renferment des microcapsules capables de stocker de l'énergie lorsqu'il fait chaud et de la redistribuer lorsqu'il fait froid. Pratique mais encombrant : ces capsules multiplient l'épaisseur d'un revêtement par cinq. Une PME briochine (22) a pourtant résolu le problème et pourrait bien imposer ses peintures réfractaires et biosourcées tout en finesse. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=27440
in DOUBLE LIAISON > N° 614 (12/2016) . - p. 8-9[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 18579 - Périodique Bibliothèque principale Documentaires Disponible 18634 - Périodique Bibliothèque principale Documentaires Disponible Phase change material - Efficient way of saving of energy / Aarti Purushottam More in PAINTINDIA, Vol. LXII, N° 10 (10/2012)
[article]
Titre : Phase change material - Efficient way of saving of energy Type de document : texte imprimé Auteurs : Aarti Purushottam More, Auteur ; Ravindra V. Gadhave, Auteur Année de publication : 2012 Article en page(s) : p. 64-70 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Chaleur -- Rayonnement et absorption
Encapsulation
Polymères
Revêtements
Transition de phaseEn physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système.Index. décimale : 667.9 Revêtements et enduits Résumé : As the demand for the energy increasing day by day but its sources are decreasing there is a need for better utilization of available energy. This can be done by storage of the available energy when it is not required and released of the same in necessary conditions. Thermal energy is one of the important form of energy. And phase change material is worked on the basis of above principles which sotres and released the thermal energy based in the form of latent heat. Inorganic, organic and eutectic type phase change materials are available. Phase change material can be incorporated into matrix by various techniques, like direct addition, microencapsulation, nanoencapsulation etc. They find application in textile, aerospace, refrigerator, building materials, air conditioners etc. The incorporation of phase change material in paint or coating has not yet been explored fully, yet it could one of the best solutions for architectural industry. Note de contenu : - THERMAL ENERGY STORAGE CAN BE POSSIBLE BY THREE WAYS : Sensible heat storage - Latent heat storage - Thermochemical energy storage - Sensible heat storage - Latent heat storage - thermochemical heat storage - Phase change material - Working principle of phase change material - PCM properties - Type of phase change material - Typical properties of available phase change material - Selection criteria for PCM - Technique for immersion of phase change materials - Encapsulation - PCM with supporting material
- POLYMERIC PHASE CHANGE MATERIAL
- PCM IN POLYMER
- PROBLEM WITH PHASE CHANGE MATERIALS AND THEIR SOLUTIONS : Phase separation - Subcooling
- APPLICATION OF PHASE CHANGE MATERIALS : Phase change material in paint or coating - PCM for building applications - Phase change material for concrete applications - Solid-solid transition with direct contact heat transfer - Indirect contact latent heat storage of solar energy - PCM in mobile devices - PCM in packaging - PCM in electronic and telecom - PCM in textile - Other applicationsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16266
in PAINTINDIA > Vol. LXII, N° 10 (10/2012) . - p. 64-70[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14240 - Périodique Bibliothèque principale Documentaires Disponible Preparation and property analysis ofphase change concrete PEG/SiO2-CPCM in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 29, N° 1 (02/2019)
[article]
Titre : Preparation and property analysis ofphase change concrete PEG/SiO2-CPCM Type de document : texte imprimé Année de publication : 2019 Article en page(s) : p. 21-26 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Caractérisation
Matériaux cimentaires
Matériaux cimentaires -- Propriétés mécaniques
Polyéthylène glycol
Résistance à la compression
SiliceLa silice est la forme naturelle du dioxyde de silicium (SiO2) qui entre dans la composition de nombreux minéraux.
La silice existe à l'état libre sous différentes formes cristallines ou amorphes et à l'état combiné dans les silicates, les groupes SiO2 étant alors liés à d'autres atomes (Al : Aluminium, Fe : Fer, Mg : Magnésium, Ca : Calcium, Na : Sodium, K : Potassium...).
Les silicates sont les constituants principaux du manteau et de l'écorce terrestre. La silice libre est également très abondante dans la nature, sous forme de quartz, de calcédoine et de terre de diatomée. La silice représente 60,6 % de la masse de la croûte terrestre continentale.
Sol-gel, Procédé
Thermocinétique
Transition de phaseEn physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système.Index. décimale : 620.13 Matériaux de construction : pierre, ciment, béton, liants de Résumé : With polyethylene glycol (PEG) as the phase change material (PCM), and silica sol as inorganic porous carrier, this paper prepares the polyethylene glycol/silica sol composite phase change material (PEG/Si02-CPCM) using sol-gel method, and adds PEG/Si02-CPCM into concrete to prepare phase change concrete according to the absolute volume method. Next, this paper uses scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) to characterize the microstructure, compatibility, stability and energy storage of PEG/Si02-CPCM, and tests the compressive strength and thermal conductivity of the phase-change concrete. The results show that PEG-2000 had a good compatibility with Si02; the mass fraction of PEG in the CPCM should be controlled within 90 %; after 200 thermal cycles, the mass loss is less than I %. The PEG/Si02-CPCM starts to undergo phase change at the temperature of 42.4 °C; the strength of the phase-change concrete with a 5 % PEG content dropped by about 4.96 %; under the premise of ensuring good working performance, the addition of the PEG/Si02-CPCM can greatly enhance the thermal conductivity of the concrete. Note de contenu : - EXPERIMENT : Raw materials - Test and characterization methods - Preparation of PEG/SiO2 composite shape-stabilized phase change material - Design of phase change concrete mixing ratios
- RESULTS AND DISCUSSION : PEG/SiO2 adsorption rate and SEM analysis - Compatibility analysis - Phase change cycle stability - Mechanical properties of hpase change concrete - Thermal conductivity of phase change concrete
- Table 1 : Mass ratio of PEB and silica sol
- Table 2 : Mixing ratio of standard concrete
- Table 3 : Mixing ratio of phase change concrete
- Table 4 : Phase change cycle stability
- Table 5 : Mass of PEG/SiO2-CPCM after multiple phase change cycles
- Table 6 : Thermal conductivity of phase change concrete (W/m-K)
- Fig. 1 : Preparatio flow of PEB/SiO2 composite shape-stabilized phase change material
- Fig. 2 : Preparation of concrete test pieces
- Fig. 3 : SEM graphs of SiO2 and PEG/SiO2
- Fig. 4 : Infrared spectrum graphs of PEG, SiO2 and PEG/SiO2-CPCM
- Fig. 5 : DSC curves of PEG and PEG/SiO2-CPCM
- Fig. 6 : Phase change concrete compressive strengh
- Fig. 7 : Strength change of phase concreteDOI : https://doi.org/10.18280/rcma.290104 En ligne : https://www.iieta.org/download/file/fid/622 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34733
in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES > Vol. 29, N° 1 (02/2019) . - p. 21-26[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22404 - Périodique Bibliothèque principale Documentaires Disponible Preparation and property of phase change fiber by electospinning / Hong Yan Wu in CHEMICAL FIBERS INTERNATIONAL, (10/2018)
[article]
Titre : Preparation and property of phase change fiber by electospinning Type de document : texte imprimé Auteurs : Hong Yan Wu, Auteur ; Zuo Zhe Kun, Auteur ; Kang Ling Xin, Auteur ; Bo Li Xin, Auteur ; Zhang Lin Xing, Auteur Année de publication : 2018 Article en page(s) : p. 68-70 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Analyse thermique
Electrofilature
Microscopie électronique à balayage
Nanofibres
Stabilité thermique
Thermogravimétrie
Transition de phaseEn physique, une transition de phase est une transformation du système étudié provoquée par la variation d'un paramètre extérieur particulier (température, champ magnétique...).
Cette transition a lieu lorsque le paramètre atteint une valeur seuil (plancher ou plafond selon le sens de variation). La transformation est un changement des propriétés du système.Index. décimale : 677.4 Textiles artificiels Résumé : The microcapsules with the function of phase transition temperature were added to the spinning solution, and the nano-fibers with phase transition function were spun by electrospinning. These fibers were characterized by scanning electron microscopy, differential scanning calorimetry and thermogravimetric analyzer. The results show: the fibers are flat and smooth and the diameter of fiber increases with the increase of the content of microcapsules; the fiber has a certain phase change function, but the phase change temperature and the phase change enthalpy have nothing to do with the content of the microcapsules; the fiber has good thermal stability. Note de contenu : - EXPERIMENTS : Materials - Preparation of phase transition nanofibers by electrospinning - Property of phase change nanofibers
- RESULTS AND DISCUSSIONS : Micromorphology and diameter distribution of phase change fibers - Phase transition performance - Thermal stability
- Table 1 : Main instruments
- Table 2 : Preparation of phase-change fiber
- Fig. 1 : SEM images and diameter distribution of phase change fibers
- Fig. 2 : Mean diameter of phase change fibers
- Fig. 3 : DSC curves of phase change fibers
- Fig. 4 : TGA curves of phase change fibersEn ligne : https://drive.google.com/file/d/1WqJlWzO8XwqGAm_JnEo3AowXVSt1j_CZ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31260
in CHEMICAL FIBERS INTERNATIONAL > (10/2018) . - p. 68-70[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20259 - Périodique Bibliothèque principale Documentaires Disponible Preparation and property of phase change fiber by electrospinning / Hong Yan Wu in CHEMICAL FIBERS INTERNATIONAL, Vol. 68, N° 1 (03/2018)
PermalinkPreparation of paraffin-based phase-change microcapsules and application in geopolymer coating / Xuesen Lv in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 15, N° 4 (07/2018)
PermalinkA review on microencapsulated phase change materials in building materials / Soham Sharad Chaudhari in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 21, N° 1 (01/2024)
PermalinkReview on thermochromic materials : development, characterization, and applications / Abdullatif Hakami in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 2 (03/2022)
PermalinkStimuli responsive leathers using smart retanning agents / Sangeetha Subramanian in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CVII, N° 6 (06/2012)
PermalinkSuperior long-term performance of composite phase change material with high-density polyethylene under thermal aging process / Budhi Muliawan Suyitno in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 33, N° 3 (06/2023)
PermalinkSynthèse, caractérisation et propriétés de polyubutadienes contenant des ions monovalents ou divalents / Makhlouf Lalet / 1983
PermalinkSynthesis and performance of nano-encapsulated phase change materials for leather / Chen Jie in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 101, N° 6 (11-12/2017)
PermalinkThe water vapour permeability of leather finished by thermally responsive polyurethane / Haojun Fan in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 89, N° 3 (05-06/2005)
PermalinkThermicTM défie les appareils de climatisation énergivores / Pedro Santos in L'INDUSTRIE TEXTILE, N° 1403 (07-08/2010)
PermalinkTransition de phase isotrope/nématique induite par cisaillement dans un système micellaire chargé / E. Cappelaere in LES CAHIERS DE RHEOLOGIE, Vol. XV, N° 1 (10/1996)
PermalinkUnderstanding softening of amorphous materials for FFF applications / José Luis Colon Quintana in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 1 (2022)
PermalinkUtilisation des matériaux à changement de phase en textile / Pierre Viallier in L'ACTUALITE CHIMIQUE, N° 360-361 (02-03/2012)
Permalink