Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Novel additive for easier "easy-to-clean" / Ulrich Tritschler in EUROPEAN COATINGS JOURNAL (ECJ), N° 6 (06/2019)
[article]
Titre : Novel additive for easier "easy-to-clean" : A novel surface modifier based on a fluoro-modified polyacrylate block copolymer with co-reactive functionalities is presented Type de document : texte imprimé Auteurs : Ulrich Tritschler, Auteur ; Ralf Knischka, Auteur Année de publication : 2019 Article en page(s) : p. 34-41 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Angle de contact
Copolymères séquencés
Dépôt par pulvérisation
Essais accélérés (technologie)
Fluoropolymères
Formulation (Génie chimique)
Polyacrylates
Revêtements -- Additifs:Peinture -- Additifs
Revêtements bi-composant:Peinture bi-composant
Surfaces -- NettoyageIndex. décimale : 667.9 Revêtements et enduits Résumé : Analytical methods and application tests provide insights into the efficient modification of coating surfaces, the fundamental working principle of the fluoro-containing surface modifier, and the weathering resistance of the additivated coating surfaces. The additive concept provides a high versatility for a variety of solvent-borne formulation systems. Note de contenu : - Why are block copolymers preferred ?
- Tracking of block copolymers with different molecular weights via in-depth surface characterisation
- Weathering stability of surface effect
- Selective application testing for easy-to-clean coating surfaces
- Experimental section
- Fig. 1 : Technical approach : Block copolymer design with co-reactive units X and fluoro-containing units
- Fig. 2 : Water contact angle as a function of surface free energy (SFE) when adding different copolymers additives (1 and 5 %)
- Fig. 3 : Representative ToF-SIMS depth profiles of a 2K PU coating surface without additive (a) and different additive addition levels (b,c)
- Fig. 4 : Determination of the material-specific sputter rate : Correlation of sputter time/sputter cylces with sputter depth
- Fig. 5 : Water contact angle of additivated 2K PU coating surfaces as a function of weathering time (500, 1000 and 2000 h ; accelerated weathering standard SAE J 2527)
- Fig. 6 : (a) Typical ToF-SIMS depth profile of 2K PU coating surfaces during accelerated weathering (standard SAE J 2527) ; b-e) Representative AFM height and phase images of the coating surface before weathering (b,c) and after a weathering time of 1000h (d,e)
- Fig. 7 : Table with finger print rating, initial visibility, including images of finger prints from left to right (very bad = 1, medium = 3, good = 4 & very good = 5)
- Table 1 : Formulation details
En ligne : https://drive.google.com/file/d/14CWZC2pY_mPFZ-AYsmFavjTsRqVEjBha/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32689
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 6 (06/2019) . - p. 34-41[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21002 - Périodique Bibliothèque principale Documentaires Disponible A novel approach for new cost-saving durable anticorrosive and antibacterial coatings / Walaa M. Abd El-Gawad in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 5 (09/2019)
[article]
Titre : A novel approach for new cost-saving durable anticorrosive and antibacterial coatings Type de document : texte imprimé Auteurs : Walaa M. Abd El-Gawad, Auteur ; Nivin M. Ahmed, Auteur ; Wael S. Mohamed, Auteur ; Eglal R. Souaya, Auteur Année de publication : 2019 Article en page(s) : p. 1263-1281 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acétate de vinyle L'acétate de vinyle est l'ester de l'acide acétique (acide éthanoïque) avec le tautomère alcoolique de l'éthanal (acétaldéhyde) et de formule semi-développée, CH3COO–CH=CH2.
L'acétate de vinyle est préparé, en règle générale, en phase vapeur, en faisant réagir un grand excès d'acétylène sur de l'acide acétique (200 °C) en présence de catalyseurs au zinc et au cadmium). On obtient un liquide incolore à odeur très pénétrante qui ne se polymérise en polyacétate de vinyle (PVAC) qu'en présence de catalyseurs et donne des solides durs très stables à la chaleur. Il peut être copolymérisé avec d'autres composés vinyliques ou d'autres monomères.
Antibactériens
Anticorrosifs
Anticorrosion
Copolymérisation
Essais accélérés (technologie)
Evaluation
Matériaux -- Propriétés fonctionnelles
Matériaux hybrides
Métaux -- Revêtements protecteurs
Spectroscopie d'impédance électrochimique
ZéolitesIndex. décimale : 667.9 Revêtements et enduits Résumé : Multifunctional coatings that perform various actions simultaneously are now of prevailing importance, with zeolites being one of the most useful materials in this field. In this work, Na-P-zeolite was prepared from kaolin and subjected to a cation-exchange process to replace Na+ by Cu2+ and/or Zn2+ to achieve anticorrosive and antibacterial effects. In situ emulsion polymerization of vinyl acetate-vinyl versatate (VAc-VEOVA) copolymer at the nanoscale with P-zeolite and Zn-, Cu-, Zn/Cu-cation-exchanged P-zeolites was then applied to obtain P-zeolite-(VAc-VEOVA), Zn-P-zeolite-(VAc-VEOVA), Cu-P-zeolite-(VAc-VEOVA), and Zn/Cu-P-zeolite-(VAc-VEOVA) nanocomposites. Anticorrosive and antibacterial tests were then carried out on films containing the different nanocomposites using laboratory accelerated testing, electrochemical impedance spectroscopy (EIS), and the disc well diffusion method with different types of Gram-positive (G+) and Gram-negative (G−) bacteria, revealing that the film containing the mixed (Zn/Cu)-P-zeolite showed the best anticorrosive and antibacterial performance. Note de contenu : - EXPERIMENTAL : Materials - Preparation of P-zeolite - Prepration of cation-exchanged P-zeolites - Preparation of (VAc-VEOVA) copolymer nanocomposites by in situ emulsion polymerization - Paint preparation - Preparatin of steel panels for anticorrosion testing - Preparation of specimens for antibacterial testing
- METHODS OF TESTING AND EVALUATION OF PAINTS : Anticorrosion measurements
- RESULTS AND DISCUSSION : Characterization of P-zeolite and cation-exchanged P-zeolites - Characterization of the prepared nanocomposites - Anticorrosion performance of paints containing P-zeolite and cation-exchanged P-zeolites - Antibacterial results for cation-exchanged P-zeolites and their paint formulationsDOI : 10.1007/s11998-019-00202-9 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-019-00202-9.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33010
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 16, N° 5 (09/2019) . - p. 1263-1281[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21154 - Périodique Bibliothèque principale Documentaires Disponible Novel metal-free catalysts for epoxy carboxy coatings / Ravi Ravichandran in COATINGS TECH, Vol. 16, N° 3 (03/2019)
[article]
Titre : Novel metal-free catalysts for epoxy carboxy coatings Type de document : texte imprimé Auteurs : Ravi Ravichandran, Auteur ; Michael Emmet, Auteur ; Matthew Gadman, Auteur ; John Florio, Auteur ; Steven Woltornist, Auteur Année de publication : 2019 Article en page(s) : p. 28-40 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Automobiles -- Vernis
Catalyseurs
Essais accélérés (technologie)
Essais de résilience
Essais dynamiques
Formulation (Génie chimique)
Polyacryliques
Réticulation (polymérisation)
vernis en phase solvant
ViscositéIndex. décimale : 667.9 Revêtements et enduits Résumé : A new class of metal-free catalysts has been developed that promotes the crosslinking reaction of epoxy functional polymers with carboxyl functional compounds and polymers. Particularly effective at much lower cure temperatures, these catalysts provide stable single package formulations and improved resistance properties. In addition, unlike amine-based cmpounds, these catalysts do not yellow during cure or on over-bake. Note de contenu : - INTRODUCTION : Epoxy acid automotive clearcoats - Epoxy acid-based powder coatings - Binder, crosslinking chemistry, and catalysis
- EXPERIMENTAL : Experiment I : catalyst studies on NACURE XC-324 in a 1K SP epoxy/carboxy clearcoat (Materials and preparation of 1K SB epoxy/carboxy clearcoat formulation - Film preparation of 1K SB epoxy/carboxy clearcoats - Film properties of catalyzed clearcoats - Viscosity stability of epoxy carboxy liqiud coatings - Gel fraction studies - QUV resistance of catalyzed epoxy carboxy coatings - Humidity exposures of catalyzed epoxy carboxy coatings - Crickmeter abrasion - Overbake resistance) - Experiment II : Catalyst studies on NACURE XC-355 in a 2K SB epoxy/carboxy clearcoat (materials and preparation of 2K SB/epoxy carboxy clearcoat formulation - Film preparation of 2KSB epoxy/carboxy clearcoat - Film preparation of HMMM crosslinked acrylic and epoxy/carboxy clearcoats - Cure response of acrylic OH/HMMM and acrylic COOH/GMA - Environmental etch comparison of acrylic OH/HMMM vs acrylic COOH/GMA
- Fig. 1 : Epoxy carboxy crosslinking reaction
- Fig. 1a : Viscosity stability of epoxy/carboxy SB coatings (60°C storage)
- Fig. 1b : Viscosity stability of epoxy/carboxy SB coatings (50°C storage)
- Fig. 1c : Viscosity stability of epoxy/carboxy SB coatings (ambient storage)
- Fig. 2 : Percent weight retention after 6h of reflux with acetone/metanol (1/1)
- Fig. 3 : Yellowness measurements after QUV exposure
- Fig. 4 : Change in gloss following crockmeter abrasion
- Fig. 5 : Yellowing (b*) and total color (E*) change of clearcoats after overbake
- Fig. 6 : Oscillation curve of complet viscosity and temperature as a function of time
- Fig. 7 : MEK resistance of hardness of epoxy/acid clearcoats-100°C/30 min bake
- Table 1 : Classes of available catalyst technologies
- Table 2 : 1K SB epoxy/carboxy clearcoat
- Table 3a : Film properties of carboxy functional acrylic and GMA epoxy-120°C/30 min
- Table 3b : Film properties of carboxyl functional acrylic and GMA epoxy - 110°C/30 min
- Table 4 : Viscosity stability of epoxy carboxy liquid coatings (60°C/16 h)
- Table 5 : Gel fraction studies after 6h Soxhlet extraction with acetone/methanol (1/1)
- Table 6 : Yellowness measurements after QUV exposure-b*values
- Table 7 : Yellowness measurements after QUV exposure-Δ*values
- Table 8 : Humidity exposures of catalyzed epoxy/carboxy coatings-Blister ratings
- Table 9 : Visual rating for crockmeter tests-0-R rating
- Table 10 : Images with visual rating and change in gloss following crockmeter abrasion
- Table 11 : Change in color values of catalyzed clearcoats after overbake
- Table 12 : 2K solventborne epoxy/carboxy clearcoat
- Table 13a : Pre-experiment steps for oscillation tests
- Table 13b : Protocol for oscillation tests
- Table 14 : Film properties of carboxyl functional acrylic and GMA epoxy-100°C/30 min
- Table 15 : Yellowing resistance follwing 100°C/30 min overbake
- Table 16 : Total color change following 100°C/30 min overbake
- Table 17 : (a) Hydroxyl functional acrylic/HMMM vs (b) acid functional acrylic/GMA epoxy
- Table 18 : MEK resistance of (a) acrylic OH/HMMM vs (b) acrylic COOH/GMA
- Table 19 : Acid etch resistance of (a) acrylic OH/HMMM vs (b) acrylic COOH/GMAEn ligne : https://drive.google.com/file/d/1hbklMv6qE5mymZKYqIQ2MXKYVZtkH1VA/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32045
in COATINGS TECH > Vol. 16, N° 3 (03/2019) . - p. 28-40[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20698 - Périodique Bibliothèque principale Documentaires Disponible A novel way to avoid Cr(VI) formation in leather : copper mordanting / Cigdem Kilicarislan Ozkan in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 101, N° 2 (03-04/2017)
[article]
Titre : A novel way to avoid Cr(VI) formation in leather : copper mordanting Type de document : texte imprimé Auteurs : Cigdem Kilicarislan Ozkan, Auteur ; Hasan Ozgunay, Auteur ; Deniz Kalender, Auteur Année de publication : 2017 Article en page(s) : p. 94-96 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Chrome hexavalent
Cuir -- Teneur en chrome hexavalent
Cuirs et peaux -- Analyse
Cuivre
Essais accélérés (technologie)
Mordançage (teinture)
Tanins végétaux
Tannage combinéLe tannage combiné se dit des tannages qui allient deux familles ou genre de tannage pour obtenir un résultat additionnant les qualités complémentaires des tannins mis en Å“uvre par exemple Chrome-Végétal ou Chrome-SynthétiqueIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : In recent decades many studies have been conducted in order to understand the exact origin of Cr(VI) in leather and find, remedies for this problem and it seems that most tanners have resolved this issue in industry. However, in the present study a novel way to avoid Cr(VI) formation in leather by copper mordanting (CuSO4.5H2O) was investigated. 0.5 and 1.0% (w/w) of CuS04.5H2O were used bath standalone and also in combination with vegetable tannins which are commonly used in leather industry. From the results it was seen that bath, in standalone, and in combination usage with vegetable tannins, copper seems to be a solution against formation of Cr(VI) in leather and keeping the Cr(VI) values below the permissible limits. Note de contenu : - Materials
- Methods
- Artificial ageing of leather samples and Cr(VI) analysisEn ligne : https://drive.google.com/file/d/1g6Vum98uhDlqVW6QqqtV2EcjtW17mqZL/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28516
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 101, N° 2 (03-04/2017) . - p. 94-96[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18878 - Périodique Bibliothèque principale Documentaires Disponible On the corrosion effects of reblasted steel / Carl Reed in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 1 (01/2018)
[article]
Titre : On the corrosion effects of reblasted steel Type de document : texte imprimé Auteurs : Carl Reed, Auteur ; Sarah Olthof, Auteur ; Kat Coronado, Auteur ; Heather Cui, Auteur Année de publication : 2018 Article en page(s) : p. 34-44 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Corrosion
Décapage
Essais accélérés (technologie)
Surfaces -- Analyse
Topographie
Traitement de surface par impactIndex. décimale : 667.9 Revêtements et enduits Résumé : It is not uncommon during the course of abrasive-blast surface preparation to overblast and create a blast profile that is over and above the defined specification. This article describes a study that takes a closer look at the topography of a surface (before and after reblasting an over-blasted profile) and determines how this topography might affect the corrosion protection of a coating. Note de contenu : - TABLES : 1. Observed profile characteristics of the four test panel sets - 2. Accelerated corrosion testing results of the coated panel sets
- FIGURES : 1. Orientations of reblasting - 2. Effect of reblasting a profile with a secondary blast cleaning. Original blast profile and same profile after blasting with a smaller steel grit - 3, 4, 5 and 6. Panels 1 to for : Digital optical micrograph and scanning electron micrograph (right) at a magnification of 200 times - 7. Possible orientations of peaks after oblique reblasting. Rolled over peaks from reblast and pushed peaks from reblast - 8. Corrosion and cathodic delamination at the scribes of the panel sets (clockwise from top left : Panel Set 1, Panel Set 2, Panel Set 4 and Panel Set 3.) - 9. Formation of void areas and black iron oxide on a coated substrateEn ligne : http://www.paintsquare.com/archive/?fuseaction=view&articleid=6236 Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30366
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 35, N° 1 (01/2018) . - p. 34-44[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19617 - Périodique Bibliothèque principale Documentaires Disponible Outdoor weathering is the cornerstone of a well-rounded testing programme / Jeffrey Quill in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 205, N° 4612 (09/2015)
PermalinkPainting of weathered hot-dip galvanised steel : its behaviour in cyclic ageing chambers / P. Merino in SURFACE COATINGS INTERNATIONAL, Vol. 78, N° 1 (01/1995)
PermalinkPaints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test - International standard ISO 16053 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2010)
PermalinkPeintures et vernis. Détermination de la résistance au brouillard salin neutre - Norme ISO 7253 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (1996)
PermalinkPeintures et vernis. Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 1 : Lignes directrices générales - Norme internationale ISO 16474-1 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2013)
PermalinkPeintures et vernis. Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 2 : Lampes à arc au xénon - Norme internationale ISO 16474-2 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2013)
PermalinkPeintures et vernis. Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 3 : Lampes fluorescentes - Norme internationale ISO 16474-3 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2013)
PermalinkPeintures et vernis. Produits de peinture et systèmes de peinture pour bois en extérieur - Norme NF EN 927-3 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2012)
PermalinkPeintures et vernis. Produits de peinture et systèmes de peinture pour bois en extérieur - Partie 6 : Vieillissement artificiel des revêtements pour bois par exposition à des lampes UV fluorescentes et à de l'eau - Norme NF EN 927-6 / AFNOR / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (2018)
PermalinkPeintures et vernis. Vieillissement artificiel comportant un dépôt acide - Norme ISO 15110 / International Organization for Standardization (Genève, Suisse) / Geneve [Switzerland] : International Organization for Standardization (ISO) (2013)
PermalinkPerçage d'un matériau composite tissé 3D / Nicolas Cadorin in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 23, N° 3 (09-10-11-12/2013)
PermalinkPerformance evaluation of dimethyl silicone oil as archaeological dry leather lubricant / Alireza Koochakzaei in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 4 (04/2020)
PermalinkPerformance evaluation of hybrid formulations consisting of antioxidant and crosslinking agents for the treatment of acid degradation in historic vegetable-tanned leathers / Alireza Koochakzaei in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXVII, N° 8 (08/2022)
PermalinkPerformance of finishes on wood that is chemically modified by acetylation / E. P. J. Beckers in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 70, N° 878 (03/1998)
PermalinkPhotodegradation depth profile and penetration of light in Japanese cedar earlywood (Cryptomeria japonica D. Don) exposed to artificial solar radiation / Y. Kataoka in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 87, B3 (09/2004)
Permalink