Accueil
Catégories
> Silicones
Les silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).
Silicones
Commentaire :
Les silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).
Voir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
[article]
Titre : Less is more for new technology : Novel silicone resin for high-performing, lower-cost facade paints and plasters Type de document : texte imprimé Auteurs : Markus Vogel, Auteur ; Roger Reinartz, Auteur ; Daniel Brünink, Auteur Année de publication : 2018 Article en page(s) : p. 28-32 Langues : Anglais (eng) Catégories : Applications extérieures
Hydrophobie
Résistance aux conditions climatiques
Revêtement mural:Peinture murale
Revêtements en bâtiment:Peinture en bâtiment
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 667.9 Revêtements et enduits Résumé : Facade paints need to be both decorative and weathering resistant as well as meet increasing customer requirements. Extending the colour range and environmental compatibility at the same time as reducing costs poses a real challenge. However, researchers believe they have developed a new hydrophobing agent using silicone resin technology that sets a new standard. Note de contenu : - High water-vapour diffusion with silicone resin
- Fast-developing water resistance
- Highly effective at low concentrations
- Lower dirt pick-up
- Greater colour choice with organic pigments
- Processing and storage benefits
- Environmentally compatible for broad market access
- Reduced costs and greater performanceEn ligne : https://drive.google.com/file/d/1fPZjiJxxk2p5YCpKljSVecUgmTuxFig6/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=29768
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 1 (01/2018) . - p. 28-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19497 - Périodique Bibliothèque principale Documentaires Disponible Let there be LEDs in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 17, N° 3 (03/2010)
[article]
Titre : Let there be LEDs Titre original : Silicones simplify the production of energy-saving, climate-protecting light-emitting diodes Type de document : texte imprimé Année de publication : 2010 Article en page(s) : p. 24-25 Langues : Américain (ame) Catégories : Colles:Adhésifs
Diodes électroluminescentes
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 668.3 Adhésifs et produits semblables Résumé : Light is a symbol of progress. The incandescent light bulb, once the pioneer of a global lighting revolution, is disappearing from store shelves. In tomorrow’s multimedia society, color displays the size of a house will generate crystal-clear images, and entire sports stadiums will be lit by high-performance lamps.
Light can also be used as a tool. For example, laser scalpels have become an indispensable part of medical technology.
These new lighting technologies are driven by energy-efficient light-emitting diodes (LEDs). WACKER’s researchers have developed an innovative UV-curing silicone that makes it relatively inexpensive to manufacture the energy-saving light sources of the futurPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8820
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 17, N° 3 (03/2010) . - p. 24-25[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012044 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Long pot life, fast cure Type de document : texte imprimé Auteurs : Christian Ochs, Auteur Année de publication : 2010 Article en page(s) : p. 11-14 Langues : Multilingue (mul) Catégories : Colles:Adhésifs
Composants électriques et électroniques
Elastomères
Réticulation (polymérisation)
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 668.3 Adhésifs et produits semblables Résumé : UV-actived silicones - Silicones are indispensable in many industrial products. However, processors who up until now have been using crosslinkable silicone formulations had to choose between a long pot life and rapid curing. It was not possible to have both at once. An effective solution to this quandary is to use UV-activated silicones, which have already proved their mettle in the manufacturing of electronic component. Note de contenu : UV light activates the crosslinking reaction / No cleavage products / Adjustable curing / Sufficient UV transparency necessary / Faster series production / Short cycle times in potting applications / UV-activated silicone adhesives. En ligne : https://drive.google.com/file/d/1nU2QSZu4FQ97-5JsVkOAwZBuVboBNGTV/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=10225
in ADHESION - ADHESIVES + SEALANTS > N° 3/2010 (2010) . - p. 11-14[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012524 - Périodique Bibliothèque principale Documentaires Disponible Lubricant controlled release silicone fouling release coatings based on mesoporous molecular sieves / Jinhua Lei in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 2 (03/2023)
[article]
Titre : Lubricant controlled release silicone fouling release coatings based on mesoporous molecular sieves Type de document : texte imprimé Auteurs : Jinhua Lei, Auteur ; Zhongzheng Li, Auteur ; Tian He, Auteur ; Zhuqian Wang, Auteur ; Shitao Yao, Auteur ; Huayu Qiu, Auteur Année de publication : 2023 Article en page(s) : p. 703-711 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Absorption
Caractérisation
Lubrifiants
Matériaux mésoporeux
Revêtements -- Propriétés mécaniques
Revêtements antisalissures
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).
Système de libération contrôlée (technologie)
Tamis moléculairesIndex. décimale : 667.9 Revêtements et enduits Résumé : Silicone fouling release coatings (FRCs) are biocide-free coatings, and their antifouling performance depends on the nonstick properties and the fouling release behavior. The antifouling performance can be further improved by introducing lubricant into such coatings to form lubricant-infused FRCs (iFRCs). The lubricant will be continuously released to the surface of iFRCs during use, and, in turn, on one hand, the surface of iFRCs will be updated; on the other hand, the attachment of mussels and other organisms will be affected. Inspired by the idea of drug release using porous materials, mesoporous molecular sieves (MMSs), including MCM-41 and SBA-15, were introduced into silicone FRCs in this paper because of their large specific surface area and pore volume. We expected that the release of lubricant could be controlled through MMS in the obtained coatings (iFRC-MMS), so as to obtain FRC with controllable antifouling performance, such as the long-term fouling prevention capacity. Since the release of lubricant usually takes a long time, the effect of MMS on the release of lubricant was studied by an accelerated release test in a good solvent. The surface performance, antifouling performance, and mechanical properties of iFRC-MMS have been studied through the static water contact angle (WCA) measurements, the antidiatom absorption test, and the mechanical performance tests, respectively. Our study demonstrated that: (1) the release of lubricant was indeed affected by MMS in iFRC-MMS as we expected, the release rate can be delayed to a certain extent by both MCM-41 and SBA-15, and (2) there was a compatibility relationship between the pore size of MMS and the molecular size of lubricant, (3) the release of the lubricant was also affected by the molecular weight of lubricant, (4) the intrinsic surface performance and fouling release performance of silicone FRCs were not affected by the introduction of MMS, while the mechanical properties of iFRC-MMS were slightly improved. Note de contenu : - MATERIALS AND METHODS : Reagents - Preparation of lubricant infused MMS (i-MMS) - Preparation of FRC with i-MMS (iFRC-MMS) - Characterization of the distribution of MMS in iFRC-MMS - Accelerated release test of lubricant - Performance tests of iFRC-MMS
- RESULTS AND DISCUSSION : Lubricant absorption capacity of MMS - Distribution of MMS in iFRC-MMS - Effect of MMS on lubricant release from iFRC-MMS - Effect of the lubricant viscosity on lubricant release from iFRC-MMS - Effect of MMS on the surface performance of iFRC-MMS - Effect of MMS on the antifouling performance of iFRC-MMS - Effect of MMS on the mechanical properties of iFRC-MMS
Table 1 : Mechanical properties of iFRC-MMSDOI : https://doi.org/10.1007/s11998-022-00702-1 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-022-00702-1.pdf?pdf=button Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39313
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 20, N° 2 (03/2023) . - p. 703-711[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24056 - Périodique Bibliothèque principale Documentaires Disponible Making things stick when the going gets tough / Elisabeth Theunissen in EUROPEAN COATINGS JOURNAL (ECJ), N° 5 (05/2013)
[article]
Titre : Making things stick when the going gets tough : Electrically conductive silicone adhesives for extreme environments Type de document : texte imprimé Auteurs : Elisabeth Theunissen ; Cindy Doumen ; Gunther Dreezen ; Tom Adcock Année de publication : 2013 Article en page(s) : p. 41-45 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adhésifs conducteurs
Colles:Adhésifs
Conducteurs organiques
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).
Stabilité thermiqueIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : A new family of electrically conductive silicone adhesives has been developed which meet up to longterm exposure to vibration and high temperatures. Note de contenu : - Thermal stability
- Important requirement
- Stable contact resistanceEn ligne : https://drive.google.com/file/d/1iveiR1VWMAcC-AP02IjRxdozJZvWm3YV/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18458
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 5 (05/2013) . - p. 41-45[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 15054 - Périodique Bibliothèque principale Documentaires Disponible Material preparation for high-precision volumetric dispensing / Andreas Grünfelder in ADHESION - ADHESIVES + SEALANTS, Vol. 20, N° 4/2023 (2023)
PermalinkMatières premières cosmétiques : ingrédients sensoriels / Michel Grisel / Paris : Technique & Documentation - Lavoisier (2017)
PermalinkMécanisme d'adhésion à l'interface adhésif sensible à la pression (PSA)/réseaux silicone : rôle de la formulation / Laurence Vrevin / 2001
PermalinkPermalinkMeeting more stringent sustainability standards / Patrick Vandereecken in ADHESION - ADHESIVES + SEALANTS, N° 4/2010 (2010)
PermalinkMixing and dispersing silicones / Stephanie Shira in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 21, N° 8 (08/2014)
PermalinkModern design enabled by greener, cleaner sealant technology / Brian R. White in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 26, N° 11 (11/2019)
PermalinkModern formulations for architectural paints / Vicky James in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4558 (03/2011)
PermalinkMoisture-permeable polyurethanepressure-sensitive adhesive addresses needs of wearable devices / Makito Nakamura in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 5 (05/2020)
PermalinkLe monde passionnant des silicones / J. J. Lebrun in ACTUALITES G.F.P., N° 87 (10/2000)
PermalinkPermalinkMS sealants : A comparative study of performance properties / Allan Hutchinson in ADHESIVES AGE, Vol. 39, N° 4 (04/1996)
PermalinkPermalinkMultifunctional coating based on nano fillers and natural substances / Roberto Cafagna in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4647 (12/2018)
PermalinkNano keeps water and dirt at bay / Ivan Cabrera in EUROPEAN COATINGS JOURNAL (ECJ), N° 3/2011 (03/2011)
PermalinkNatural, effective solution helps rediscover W/O systems / Alain Thibodeau in PERSONAL CARE EUROPE, Vol. 12, N° 3 (06/2018)
PermalinkNew additive to enhance surface cleanability / Gururaj Moharir in PAINTINDIA, Vol. LVII, N° 6 (06/2007)
PermalinkNew formulation concepts overcoming the water/oil transparency challenge / Sergio Manzano in SOFW JOURNAL, Vol. 143, N° 12 (12/2017)
PermalinkNew illumination of plastics / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 6-7 (06-07/2019)
PermalinkNew polymeric binders and silicones for paints, coatings, packaging, adhesives and construction solutions in SURFACE COATINGS INTERNATIONAL, Vol. 100.2 (04-05/2017)
PermalinkA new route to high-performance flexible coatings and adhesives : 2D STPE/epoxy technology in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4662 (06/2020)
PermalinkPermalinkNew technologies in silicone adhesives / Brian Burkitt in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 8 (08/2012)
PermalinkNew trends in paint formulation and processes / Ramanuj Narayan in PAINTINDIA, Vol. LXII, N° 5 (05/2012)
PermalinkPermalinkNext generation polysiloxane hybrid coatings / Gerald L. Witucki in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 202, N° 4578 (11/2012)
PermalinkNouveaux IPN pour une application haute technologie : synthèse et propriétés fonctionnelles / Boulos Youssef in MATERIAUX & TECHNIQUES, Vol. 99, N° 3 (2011)
PermalinkNovel de-aerators for airless spray applied water-based coatings / Christine Louis in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 201, N° 4563 (08/2011)
PermalinkNovel isocyanate-free moisture-curable polymers for single-components polysiloxane topcoats / Erick Lezzi in COATINGS TECH, Vol. 14, N° 8 (08/2017)
PermalinkNovel multifunctional film-forming system / Michael Mosquera in PERSONAL CARE EUROPE, Vol. 7, N° 4 (06/2014)
PermalinkA novel technique for chitosan microparticle preparation using a water/silicone emulsion: green tea model / W. Wisuiprot in INTERNATIONAL JOURNAL OF COSMETIC SCIENCE, Vol. 33, N° 4 (08/2011)
PermalinkOne-step mini-emulsion copolymerisation of waterborne polysiloxane-modified polyacrylate/pigment hybrid latex and its application in textile pigment printing / Fenping Wang in COLORATION TECHNOLOGY, Vol. 138, N° 3 (06/2022)
PermalinkOne-step synthesis of epoxy-based silicon prepolymers and its application in UV-curable coating / Fuping Bian in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 1 (01/2023)
PermalinkOptimized silicones for medical applications / Christoph Briehn in KUNSTSTOFFE INTERNATIONAL, Vol. 99, N° 2/2009 (02/2009)
PermalinkOrganosilicon materials / O. Hutzinger / Berlin Heidelberg [Allemagne] : Springer-Verlag (1997)
PermalinkPerformances et polyvalences des silicones / Joanne Schwark in L'INDUSTRIE TEXTILE, N° 1327 (01/2001)
PermalinkPhenyl and fluoro substituted silicones investigated / Jeffrey P. Caruso in PERSONAL CARE EUROPE, Vol. 3, N° 4 (11/2010)
PermalinkPhotoinduced hydrophilicity and self-cleaning characteristics of silicone-modified soya alkyd/TiO2 nanocomposite coating / Sushil S. Pawar in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 3 (05-06/2020)
PermalinkPhotostabilité des résines de silicones / Y. Israeli in CAOUTCHOUCS & PLASTIQUES, N° 724 (06-07/1993)
PermalinkPhysicist develops new silicone rubber / Fariss Samarrai in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 20, N° 6 (06/2013)
PermalinkPigmented silicone/epoxy novel blends for preparation of stratified nontoxic foul release coatings / Sushil S. Pawar in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 4 (07/2022)
PermalinkPollution control coatings / Ramkisan S. Tambare in PAINTINDIA, Vol. LXII, N° 3 (03/2012)
PermalinkLes pollutions des revêtements filmogènes / Association Française des Techniciens des Peintures, Vernis, Encres et Adhésifs Rhône-Alpes / AFTPVA Rhône-Alpes (1991)
PermalinkPoly(methyl methacrylate)/polysiloxane core-shell latex as a deepening agent for dyed polyester fabric / Chengbing Yu in COLORATION TECHNOLOGY, Vol. 135, N° 5 (10/2019)
PermalinkPermalink