Accueil
Catégories
> Pyrolyse
La pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente. Pyrolyse
Commentaire :
La pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente. |
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Durability of organic-matrix composite materials / Jacques Lacoste in JEC COMPOSITES MAGAZINE, N° 94 (01-02/2015)
[article]
Titre : Durability of organic-matrix composite materials Type de document : texte imprimé Auteurs : Jacques Lacoste, Auteur ; Jacques Lemaire, Auteur Année de publication : 2015 Article en page(s) : p. 51-53 Langues : Anglais (eng) Catégories : Composites -- Analyse
Composites thermoplastiques -- Détérioration
Durée de vie (Ingénierie)
Essais accélérés (technologie)
Matériaux hybrides
Polymères -- Détérioration
Prévision, Théorie de la
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.Index. décimale : 668.4 Plastiques, vinyles Résumé : This paper, presented by CNEP, a French research center specialized on physicochemical analysis of polymer and composites, describes briefly the challenge of organic-matrix composites materials to maintain their initial properties over the timespan considering the inherent fragility of most polymers to ageing (thermal, photo, ...). This can be approached by using accelerated ageing techniques representative of their exposure in use conditions and eventually but developping an efficient stabilization according these use conditions. Note de contenu : - The inherent fragility of polymers to combustion and ageing
- Ageing of polymer materials (matrix, and sometimes the composite reinforcement or adhesive)
- Analytical approach and predicting ageing
- Polymer materials for the composite industryPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=23192
in JEC COMPOSITES MAGAZINE > N° 94 (01-02/2015) . - p. 51-53[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16778 - Périodique Bibliothèque principale Documentaires Disponible Effect of binder on performance of intumescent coatings / Joana T. Pimenta in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 2 (03/2016)
[article]
Titre : Effect of binder on performance of intumescent coatings Type de document : texte imprimé Auteurs : Joana T. Pimenta, Auteur ; Carlos Gonçalves, Auteur ; Loic Hiliou, Auteur ; Jorge F. J. Coelho, Auteur ; Fernà o D. Magalhà es, Auteur Année de publication : 2016 Article en page(s) : p. 227-238 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Copolymère styrène acrylique
Intumescence (chimie)
Isolation thermique
Liants
Microscopie
Polyacryliques
polymères vinyliques
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.
Revêtements -- Additifs:Peinture -- Additifs
Revêtements -- Propriétés thermiques:Peinture -- Propriétés thermiques
RhéologieIndex. décimale : 667.9 Revêtements et enduits Résumé : This study investigates the role of the polymeric binder on the properties and performance of an intumescent coating. Waterborne resins of different types (vinylic, acrylic, and styrene-acrylic) were incorporated in an intumescent paint formulation, and characterized extensively in terms of thermal degradation behavior, intumescence thickness, and thermal insulation. Thermal microscopy images of charred foam development provided further information on the particular performance of each type of coating upon heating. The best foam expansion and heat protection results were obtained with the vinyl binders. Rheological measurements showed a complex evolution of the viscoelastic characteristics of the materials with temperature. As an example, the vinyl binders unexpectedly hardened significantly after thermal degradation. The values of storage moduli obtained at the onset of foam blowing (melamine decomposition) were used to explain different intumescence expansion behaviors. Note de contenu : - EXPERIMENTAL : Materials and intumescent coatings preparation - Characterization methods
- RESULTS : Thermal degradation - Intumescence morphology and thermal insulation - Thermal microscopy - RheologyDOI : 10.1007/s11998-015-9737-5 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-015-9737-5.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=26108
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 13, N° 2 (03/2016) . - p. 227-238[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 17962 - Périodique Bibliothèque principale Documentaires Disponible Effect of chrome tanning on the thermal degradation of hide collagen / K. Takenouchi in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 67 (Année 1983)
[article]
Titre : Effect of chrome tanning on the thermal degradation of hide collagen Type de document : texte imprimé Auteurs : K. Takenouchi, Auteur Année de publication : 1983 Article en page(s) : p. 159-162 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Collagène -- Détérioration
Poudre de peaux
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.
Solubilité
Spectrométrie infrarouge
Tannage au chromeIndex. décimale : 675.2 Préparation du cuir naturel. Tannage Résumé : Weight loss, solubility, and infrared spectral change of hide collagen on heating were obviously decreasef by chrome tanning. It is suggested that chrome tanning increases dry heat resistance. Below 160°C, chrome contents in excess of 3% Cr2O3 (expressed on 100 parts of collagen) were effective in the prevention of thermal degradation of hide collagen. Note de contenu : - EXPERIMENTAL : Materials - Methods
- RESULTS AND DISCUSSION : Appearance - Weight loss - Solubility - Infrared spectra
- DEUTERATION
- Table : Analysis of the spectra of deuterated hide powdersEn ligne : https://drive.google.com/file/d/1R2yQWnaO0r-pzpi4l3Y66GqP04Y2Zuce/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34193
in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC) > Vol. 67 (Année 1983) . - p. 159-162[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 007130 - Périodique Bibliothèque principale Documentaires Disponible Effect of cyclic stress while being dried on the mechanical properties and thermostability of leathers / Jinbao Huang in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXIII, N° 10 (10/2018)
[article]
Titre : Effect of cyclic stress while being dried on the mechanical properties and thermostability of leathers Type de document : texte imprimé Auteurs : Jinbao Huang, Auteur ; Keyong Tang, Auteur ; Pengyuan Yang ; Xialian Fan ; Fang Wang ; Jing Du ; Cheng-Kung Liu Année de publication : 2018 Article en page(s) : p. 318-325 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Allongement à la rupture
Chaleur sèche
Contraintes thermiques
Cuir -- Séchage
Cuirs et peaux -- Propriétés mécaniques
Fourier, Spectroscopie infrarouge à transformée de
Microscopie électronique à balayage
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.
Résistance à la traction
Résistance thermique
Rétrécissement (matériaux)
Stabilité hydrothermaleIndex. décimale : 675 Technologie du cuir et de la fourrure Résumé : Various mechanical processes are usually applied in leather making and using, which inevitably affect the structure and properties of leathers, such as mechanical performance and hydrothermal stability. Cyclic stress is very common in leather making, which may cause different changes to leather, compared with constant stress. However, very few results have been reported regarding the influence of cyclic stress on leathers. In the present work, cyclic stresses were applied to leather in drying. The influences of cyclic stress on the mechanical properties, hydrothermal stability and dry heat resistance of leathers were investigated. Also, the cross section of leather was observed with SEM, and the changes of hydrogen bonds in collagen fibers were characterized and discussed with the results of FT-IR. It was indicated that stress in drying leads to orientation of collagen fibers and increased mechanical strength. A balance is set up between tensile strength and elongation at break of leathers with the action cyclic stress. Longer stretching leads to higher tensile strength and lower elongation at break. Meanwhile, stress in drying may prevent the formation of hydrogen bonds inside collagen fibers and change the weaving structure of collagen fibers, resulting in decreased hydrothermal stability of leathers. Cyclic stress may provide leathers with better dry heat resistance than constant stress. Also, a simplified model of collagen fibers movement was introduced, to establish a relationship between processing and properties of leathers from viewpoint of collagen fiber structure. Note de contenu : - EXPERIMENTAL : Materials - Methods for the preparation of leather samples - Characterization
- RESULTS AND DISCUSSION : Hydrothermal shrinkage - Dry heat shrinkage resistance -Thermal degradation - FT-IR spectra - SEM images - Effect of stress on the mechanical properties - Sketch of fiber orientation in cyclic stressEn ligne : https://drive.google.com/file/d/1skrzEiALHoMVXyDF0Duly4pKtAzL1WX9/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31091
in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA) > Vol. CXIII, N° 10 (10/2018) . - p. 318-325[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20280 - Périodique Bibliothèque principale Documentaires Disponible Effect of polytetrafluoroethylene (PTFE) emulsion impregnation coating on filtration performance and thermal property of polyphenylene sulfide (PPS) needle felt / Chao Lv in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 4 (07/2023)
[article]
Titre : Effect of polytetrafluoroethylene (PTFE) emulsion impregnation coating on filtration performance and thermal property of polyphenylene sulfide (PPS) needle felt Type de document : texte imprimé Auteurs : Chao Lv, Auteur ; Ruiqing Shen, Auteur ; Yang Yang, Auteur ; Rui Shu, Auteur ; Guodong Li, Auteur ; Jingxian Liu, Auteur Année de publication : 2023 Article en page(s) : p. 1423-1433 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
Feutre (textiles et tissus)
Filtration
Matériaux -- Imprégnation
Matériaux aiguilletés
Polytétrafluoréthylène
PyrolyseLa pyrolyse est la décomposition ou thermolyse d'un composé organique par la chaleur pour obtenir d'autres produits (gaz et matière) qu'il ne contenait pas. L'opération est réalisée en l'absence d'oxygène ou en atmosphère pauvre en oxygène pour éviter l'oxydation et la combustion (L’opération ne produit donc pas de flamme). Il s'agit du premier stade de transformation thermique après la déshydratation.
Elle permet généralement d'obtenir un solide carboné, une huile et un gaz. Elle débute à un niveau de température relativement bas (à partir de 200 °C) et se poursuit jusqu'à 1 000 °C environ. Selon la température, la proportion des trois composés résultants est différente.
Revêtements -- Propriétés thermiques
Revêtements en phase aqueuse
Revêtements organiquesIndex. décimale : 667.9 Revêtements et enduits Résumé : Polytetrafluoroethylene (PTFE) emulsion is widely used as a coating material in the impregnation process for preparing polyphenylene sulfide (PPS) needle felts due to its excellent chemical stability and good mechanical properties. However, the effect of emulsion impregnation coating on the filtration performance of needle felts is still under debate. Moreover, in industrial applications with high temperatures, the service life of needle felts is directly affected by their thermal stability, but the pyrolysis and kinetic properties of PPS needle felt after PTFE emulsion impregnation post-processing have rarely been quantitatively investigated. In this study, the PPS fiber/PTFE emulsion (PPS/PTFE) composite needle felt was fabricated by a direct impregnation process. The pressure drop characteristic and mechanical collection efficiency of PPS needle felt and PPS/PTFE composite needle felt were comprehensively evaluated. It was found that the PTFE emulsion impregnation coating not only increases the pressure drop, but also decreases the collection efficiency. More specifically, for particles having a size below 2.5 μm, the decrement of collection efficiency further increases with the decrease of particle size, but the mechanical collection efficiency of PPS/PTFE composite needle felt for particles having larger size is almost the same as that of PPS needle felt. Three emulsion impregnation coating distribution models were inferred to systematically explain this experimental phenomenon. Additionally, the thermal degradation process of PPS needle felt and PPS/PTFE composite needle felt was analyzed, and several typical pyrolysis kinetic parameters were also determined theoretically. It was confirmed that the PTFE emulsion impregnation coatings can enhance the thermal stability of PPS needle felts. This work provides new insight into the rational application of the direct impregnation process as well as emulsion impregnation coating in the industrial filtration field. Note de contenu : - MATERIALS AND METHODS :
- Materials
- Preparation of PPS/PTFE composite needle felt
- Characterizations
- RESULTS AND DISCUSSION :
- Pressure drop characteristics and mechanical collection efficiency
- Thermal degradation process and reaction kinetics
- Table 1 : Information of experimental materialsDOI : https://doi.org/10.1007/s11998-022-00755-2 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-022-00755-2.pdf?pdf=button% [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39726
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 20, N° 4 (07/2023) . - p. 1423-1433[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24153 - Périodique Bibliothèque principale Documentaires Disponible Effect of UV irradiation of the properties of goatskin collagen matrices in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 101, N° 2 (03-04/2017)
PermalinkEtude du vieillissement thermique / L. Audouin in CAOUTCHOUCS & PLASTIQUES, N° 743 (09/1995)
PermalinkEvaluation method of the resistance of adhesives / Elisabeth Stammen in ADHESION - ADHESIVES + SEALANTS, Vol. 14, N° 2/2017 (2017)
PermalinkFeedstock recycling and pyrolysis of waste plastics / John Scheirs / Chichester [United Kingdom] : John Wiley & Sons Ltd (2006)
PermalinkFiller with lightweight potential / M. Eng. Constanze Uthoff in KUNSTSTOFFE INTERNATIONAL, Vol. 107, N° 3 (03/2017)
PermalinkFluoroélastomères aux performances améliorées / S. Bowers in CAOUTCHOUCS & PLASTIQUES, N° 816 (10/2003)
PermalinkPermalinkFormulation and optimization of radiation-curable nonisocyanate polyurethane wood coatings by mixture experimental design / Forough Zareanshahraki in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 18, N° 3 (05/2021)
PermalinkIdentifier les composés libérés lors de la dégradation thermique des plastiques / Marianne Guillemot in HYGIENE & SECURITE DU TRAVAIL, N° 237 (10-11-12/2014)
PermalinkInfluence of expanded vermiculite on fire protection of intumescent fireproof coatings for steel structures / Yadong Xue in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 12, N° 2 (03/2015)
PermalinkInfluence of PA6 as a charring agent on flame retardancy, thermal and mechanical properties of LGFR PP composites / M. Wang in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIII, N° 4 (08/2018)
PermalinkInfluence of PEPA-containing polyether structure on fire protection of transparent fire-resistant coatings / Yanchao Shi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 3 (05/2016)
PermalinkInfluence de la température sur les propriétés mécaniques et l'endommagement d'un composite carbone-thermoplastique / Xavier Gabrion in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 23, N° 1 (01-02-03-04/2013)
PermalinkIntegrated growth of Si-O-C nanosheets on the surface of carbon microstructure with the aid of carbon nanotubes / Shuang Xi in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 28, N° 2 (04-05-06/2018)
PermalinkPermalink