Accueil
Catégories
> Mélanges (chimie)
Mélanges (chimie)Voir aussi
|
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
rPET blends for high standards / Anke Schadewald in KUNSTSTOFFE INTERNATIONAL, Vol. 111, N° 7 (2021)
[article]
Titre : rPET blends for high standards : Production of injection-moldable PET-blends from mixed plastic fractions Type de document : texte imprimé Auteurs : Anke Schadewald, Auteur ; Gillian Gerke, Auteur ; Thomas Plumbohm, Auteur ; Herbert Snell, Auteur Année de publication : 2021 Article en page(s) : p. 59-61 Langues : Anglais (eng) Catégories : Compoundage
Emballages en matières plastiques -- Recyclage
Matières plastiques -- Recyclage
Mélanges (chimie)
Polyéthylène téréphtalateIndex. décimale : 668.4 Plastiques, vinyles Résumé : PET recyclates from different materials and colors pose big challenges for recyclers. Together with the University of Applied Sciences Magdeburg-Stendal, Germany, MultiPet GmbH is researching into injection-moldable blends that can be used to produce high-quality multi structured injection-molded parts from mixed PET. Only in the area of recycled clear PET samples the desired property profile was not achieved. Note de contenu : - Which problems the processing of mixed pet fractions entails
- Desired technical functionality
- Sampling and characterization
- Expansion of the recyclables chain and processing
- After injecting the test rods, analysis and optimization follows
- In the practical test, the rpet blend with polycarbonate performs best
- Fig. 1 : Colorful mixture : the recycling of mixed fractions from bottles, blisters and trays remains a major challenge
- Fig. 2 : Bales of the specification mixed PET 70/30: during the material analysis the material was divided into the fractions other dimensionally stable PET packaging, trays with and without peeling film and blisters
- Fig. 3 : rPET blend compound and injected multi-purpose test rods
- Fig. 4 : Comparison of the intrinsic viscosity of PET blends and PET arnites
- Fig. 5 : Forward thinking : application examples for multi structured injection molded components made from mixed PETEn ligne : https://drive.google.com/file/d/1FVEz5XsaKXEBjDYk6a7Nkru2i6CgF4W8/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36291
in KUNSTSTOFFE INTERNATIONAL > Vol. 111, N° 7 (2021) . - p. 59-61[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22902 - Périodique Bibliothèque principale Documentaires Disponible Sachets prépesés : un plus pour les caoutchoutiers / Claude Batut in CAOUTCHOUCS & PLASTIQUES, N° 747 (02/1996)
[article]
Titre : Sachets prépesés : un plus pour les caoutchoutiers Type de document : texte imprimé Auteurs : Claude Batut, Auteur Année de publication : 1996 Article en page(s) : p. 69-70 Langues : Français (fre) Catégories : Additifs -- Dosage
Mélanges (chimie)Index. décimale : 668.4 Plastiques, vinyles Résumé : Dans le but de simplifier et d'améliorer la précision des formulations, Safic-alcan propose désormais aux caoutchoutiers des additifs, sous forme de doses prêtes à l'emploi, pour une introduction directe dans le mélangeur. Note de contenu : - Une installation conforme aux normes
- L'art du pesage
- TABLEAUX : 1. Avantages des prémélanges - 2. Exemple de mélangePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=24505
in CAOUTCHOUCS & PLASTIQUES > N° 747 (02/1996) . - p. 69-70[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 002570 - Périodique Bibliothèque principale Documentaires Disponible Safety first for maximum benefit / Gary Raykovitz in ADHESIVE TECHNOLOGY, Vol. 18, N° 1 (03/2001)
[article]
Titre : Safety first for maximum benefit Type de document : texte imprimé Auteurs : Gary Raykovitz, Auteur Année de publication : 2001 Article en page(s) : p. 16-18 Langues : Anglais (eng) Catégories : Adhésifs thermofusibles
Indice limite d'oxygèneL'indice limite d'oxygène (ILO), ou indice d'oxygène (limite) (IO(L)) ou (L)OI (limiting) oxygen index en anglais), est une grandeur et un essai de laboratoire à petite échelle permettant de caractériser la combustibilité (inflammabilité) d'un matériau combustible, notamment une matière plastique (ou un polymère). Ce critère donne une indication relative de la combustibilité dans des conditions d'essai spécifiées, définies par des normes. Il existe différentes normes selon les domaines d'application1 et les pays : ISO 4589, ASTM D2863, UL 94, etc. Il ne faut pas confondre cette propriété avec la concentration limite en oxygène qui donne la concentration minimale en oxygène dans un mélange avec un combustible permettant l'inflammation en présence d'une source d'ignition.
Inflammabilité
Matières premières
Mélanges (chimie)
Point d'éclairLe point d'éclair ou point d'inflammabilité (en anglais : flash point) correspond à la température la plus basse à laquelle un corps combustible émet suffisamment de vapeurs pour former, avec l’air ambiant, un mélange gazeux qui s’enflamme sous l’effet d’une source d’énergie calorifique telle qu’une flamme pilote, mais pas suffisamment pour que la combustion s’entretienne d’elle-même (pour ceci, il faut atteindre le point d'inflammation). Si l’inflammation ne nécessite pas de flamme pilote, on parle alors d’auto-inflammation.
Le point d'inflammabilité, autre nom du point d'éclair, est un concept pétrolier et les premiers appareils qui permettent de définir un point d’éclair ont été décrits dans des normes pétrolières. Il faut donc toujours préciser l'appareil qui a été utilisé quand on donne une valeur de point d’éclair. La valeur dépend non seulement de l'appareil, des conditions atmosphériques mais également de la bonne vue de l'opérateur qui doit déceler le début d'inflammation.
Produits chimiques -- Sécurité
Substances inflammables
ThermogravimétrieIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : A flash fire resulting in a serious injury to an employee was the catalyst for an exhaustive risk assessment programme, taking in both the hot-melt manufacturing process and the raw materials involved. Note de contenu : - Mixtures
- Understanding MOC
- Le Chatelier's formula
- Temperature
- Variables
- Table 1 : Flash point values for raw materials
- Table 2 : Thermogravimetric analysis of raw materials
- Table 3 : Data on commonly used hot-melt raw materials
- Table 4 : Examples of MOC levels at NSC plantPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37346
in ADHESIVE TECHNOLOGY > Vol. 18, N° 1 (03/2001) . - p. 16-18[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001990 - Périodique Bibliothèque principale Documentaires Disponible Statistical research on the mixing properties of wave based screws by numerical simulations / Tian-lei Liu in INTERNATIONAL POLYMER PROCESSING, Vol. 38, N° 2 (2023)
[article]
Titre : Statistical research on the mixing properties of wave based screws by numerical simulations Type de document : texte imprimé Auteurs : Tian-lei Liu, Auteur ; Yao-Xue Du, Auteur ; Xian-Yun He, Auteur Année de publication : 2023 Article en page(s) : p. 200-213 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Cisaillement (mécanique)
Etat fondu (matériaux)
Mélanges (chimie)
Polymères
Rhéologie
Simulation par ordinateur
StatistiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : Research based on numerical simulation with the CFD software ANSYS POLYFLOW is conducted on the mixing properties for the wave screw elements, as well as barrier screw elements, by using statistical tools. Then, the investigation is conducted in detail on the relationship between pressure, maximum shear rate, mixing index and other flow field characteristics of the two above screws under the same simulation conditions. It is found that polymer melt flow in the wave screw possesses various advantages compared with the normal barrier screw, such as acquiring larger pressure, stronger shearing and stretching action, better mixing and efficiency, which mainly result from the periodic depth change design in the screw groove. On the other hand, the increased wave bulge in the wave screw lessens the space for the polymer melt to be conveyed forward, which can greatly reduce the original function of the secondary flight. Also, the convergent and divergent zones in the wave screw groove produce a much stronger stress favoring the shear and elongation rates, and also lead to a sharp increase of the axial force load on the wave screw. Consequently, for the optimization of the wave screw configuration it is suggested to reduce the axial force without decreasing the effect of the excellent distributive and dispersive mixing. Note de contenu : - MODELS AND MATERIAL : Physical model and mesh generation -
Mechanical model and material parameters
- RESULTS AND DISCUSSION : Lingering material points - Melt pressure - Maximum shear rate - Maximum stretching rate - Mixing index - Mixing efficiency - Shear stress
- Table 1 : Parameters settings for the simulationsDOI : https://doi.org/10.1515/ipp-2022-4253 En ligne : https://drive.google.com/file/d/1q9cnP_kde9lncSywO9I6WI9vGkSn1aCl/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39501
in INTERNATIONAL POLYMER PROCESSING > Vol. 38, N° 2 (2023) . - p. 200-213[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 24121 - Périodique Bibliothèque principale Documentaires Disponible Strong synergistic effect of cationic hydrocarbon surfactant and novel nonionic tri-block short-chain fluorocarbon surfactant mixtures on surface activity, wettability and solubilization / Yutang Zhou in JOURNAL OF LEATHER SCIENCE AND ENGINEERING, Vol. 3 (Année 2021)
[article]
Titre : Strong synergistic effect of cationic hydrocarbon surfactant and novel nonionic tri-block short-chain fluorocarbon surfactant mixtures on surface activity, wettability and solubilization Type de document : texte imprimé Auteurs : Yutang Zhou, Auteur ; Yong Jin, Auteur ; Yichao Shen, Auteur ; Liangjie Shi, Auteur ; Shuangquan Lai, Auteur ; Yujia Tang, Auteur Année de publication : 2021 Article en page(s) : 15 p. Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adsorption
Angle de contact
Chimie des surfaces
Colloides -- Stabilité
Colorants
Mélanges (chimie)
Micelles
Mouillabilité
Polytétrafluoréthylène
Solubilisation
Surfactants
Tension superficielle
Thermochimie
TransmittanceLa transmittance, en général, est le rapport caractérisant la transmission d'une grandeur dans un système. Elle se calcule par le rapport entre la grandeur en entrée et en sortie.
En optique, la transmittance d'un matériau ou d'un filtre est la fraction du flux lumineux le traversant. Elle est également nommée facteur de transmission mais aussi transparence dans le domaine de la photographie.Index. décimale : 541.33 Chimie physique - Chimie des surfaces (Phénomènes superficiels) Résumé : Mixing hydrocarbon surfactants with fluorocarbon surfactants is still an important strategy to improve the economic benefits and performances of fluorocarbon surfactants and expand their range of application. Herein, we prepared a novel kind of hydrocarbon-fluorocarbon surfactant mixtures via mixing a cationic surfactant, cetyltrimethylammonium bromide (CTAB), with a tri-block nonionic short-chain fluorocarbon surfactant (F9EG13F9) in aqueous solution. The results showed that adding a small CTAB amount to F9EG13F9 (the molar fraction of CTAB in the mixture (x1) was 0.2) could greatly reduce its critical micelle concentrations (cmc) from 0.408 mmol/L to 0.191 mmol/L. At this x1, the contact angle of the mixture was the minimum (57.7 °) at 100 s on polytetrafluoroethylene film, which was even lower than that of F9EG13F9. Besides, CTAB/F9EG13F9 mixtures possessed better colloidal stability and solubilization ability toward hydrophobic dye (Sudan І) than F9EG13F9. The outstanding performances of binary surfactant mixtures benefited from the non-ideal mixing and strong synergistic effect evidence that CTAB/F9EG13F9 surfactant mixtures could be used in practical applications instead of individual F9EG13F9, thereby reducing the used cost of F9EG13F9. Note de contenu : - MATERIALS AND METHODS : Materials - Surface tension measurements - Conductivity measurements - Contact angle measurements - Transmittance measurements - Solubilization of hydrophobic dye
- RESULTS AND DISCUSSION : Micellization behavior of binary mixtures - Adsorption behavior of binary mixtures - Thermodynamics of binary mixtures - Wettability of binary mixtures - Colloidal stability of binary mixtures - Solubilization of hydrophobic dye
- Table 1 : Values of cmc and micellization parameters for CTAB/F9EG13F9 mixtures at different CTAB proportions at 25 °C
- Table 2 : Critical surface tension and adsorption parameters for CTAB/F9EG13F9 mixtures at different CTAB proportions at 25 °C
- Table 3 : Thermodynamic parameters for CTAB/F9EG13F9 mixtures at different CTAB proportions at 25 °C
- Table 4 : Solubilization parameters for CTAB/F9EG13F9 mixtures at different CTAB proportions at 25 °CDOI : https://doi.org/10.1186/s42825-021-00064-1 En ligne : https://link.springer.com/content/pdf/10.1186/s42825-021-00064-1.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37547
in JOURNAL OF LEATHER SCIENCE AND ENGINEERING > Vol. 3 (Année 2021) . - 15 p.[article]Structural adhesives technology : two decades of enduring progress / Ralph Drake in ADHESIVES AGE, Vol. 40, N° 13 (12/1997)
PermalinkStudy on the chemistry of polyguanidines as precursors for polycarbodiimide crosslinkers in powder coatings / James W. Taylor in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 67, N° 846 (07/1995)
PermalinkA suitable mixing technology for every application (Part 1) / Joachim Schöck in ADHESION - ADHESIVES + SEALANTS, Vol. 20, N° 4/2023 (2023)
PermalinkA suitable mixing technology for every application (part 2) / Joachim Schöck in ADHESION - ADHESIVES + SEALANTS, Vol. 21, N° 1/2024 (2024)
PermalinkSulphonated methyl ester - a promising surfactant for detergency in hard water conditions / Yee Seng Lim in SOFW JOURNAL, Vol. 143, N° 1-2 (01-02/2017)
PermalinkSynthesis and characteristics of graft copolymerization of starch-G-PAM using a twin-roll mixer as reactor for cornstarch with different amylose/amylopectin ratios / D. Qiao in INTERNATIONAL POLYMER PROCESSING, Vol. XXIX, N° 2 (05/2014)
PermalinkPermalinkTechnology aids innovation and customisation / Peter Luebcke in PERSONAL CARE EUROPE, Vol. 8, N° 3 (04/2015)
PermalinkThe amphiphilic character of poly(acrylo-urethane) dispersions / Abdelhakim Benlefki in EUROPEAN COATINGS JOURNAL (ECJ), N° 12/96 (12/1996)
PermalinkThe detection of sperm oil in leather and oil mixtures / A. W. Landmann in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 66 (Année 1982)
PermalinkThe functional advantages of natural waxes in traditional soaps / A. G. McMahon in SOFW JOURNAL, Vol. 149, N° 4 (04/2023)
PermalinkThe launch of a new special effect powder technology in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 8, N° 3 (2015)
PermalinkThermodynamics of deformation of latex blend coatings and its implications for tailoring their properties / N. Agarwal in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 71, N° 896 (09/1999)
PermalinkThree-dimensional, non-isothermal simulations of the effect of speed ratio in partially-filled rubber mixing / H. Poudyal in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIV, N° 2 (05/2019)
PermalinkTransmission hydrauliques. Fluides et caoutchoucs - Essais de compatibilité du couple - Norme E 48-610-1
Permalink