Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Bio-based fibers in oil spill cleanups / Subramonia Pillai Viju in CHEMICAL FIBERS INTERNATIONAL, (10/2021)
[article]
Titre : Bio-based fibers in oil spill cleanups Type de document : texte imprimé Auteurs : Subramonia Pillai Viju, Auteur Année de publication : 2021 Article en page(s) : p. 36-37 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Absorbants et adsorbants
Absorption
Adsorption
Biomatériaux
Biosorbant
Fibres végétales
Huiles et graisses
Hydrocarbures
Milieu marin -- Pollution -- Lutte contre
PétroleIndex. décimale : 677 Textiles Résumé : Oil spills are a global concern because of their environmental and economic impact. Crude oil released into the marine environment through accidentai spillage or drainage from land causes serious damage to the environment and marine life. Effective decontamination and clean-ups are necessary after the spill for the protection of environment and human health. There are many methods for oil spill removal, but one of the most widely used methods is sorption by sorbents. The commercial absorbents are synthetic in nature and are non-biodegradable. The natural fibers which possess oil absorbency property are suggested as oil absorbents because of their biodegradability. Ideal sorbent materials used for oil spill cleanup include hydrophobicity, oleophilicity, high rate of oil uptake, buoyancy, retention over time, durability in aqueous media, reusability, biodegradability and recovery of oil. It is very difficult to achieve all these in a single material, still these are all needs to be considered before selecting the sorbents. Note de contenu : - Kapok fiber
- Milkweed fiber
- Coir fiber
- Cotton fiber
- Jute fiber
- Silk fiber
- Table : Oil sorption capacity of different sorbentsEn ligne : https://drive.google.com/file/d/1azRZcZoaXFBSNLpEb04tTjNlhnYhPcjB/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=36695
in CHEMICAL FIBERS INTERNATIONAL > (10/2021) . - p. 36-37[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23018 - Périodique Bibliothèque principale Documentaires Disponible Biomordanting willow bark dye on cellulosic materials / Tia Lohtander in COLORATION TECHNOLOGY, Vol. 136, N° 1 (02/2020)
[article]
Titre : Biomordanting willow bark dye on cellulosic materials Type de document : texte imprimé Auteurs : Tia Lohtander, Auteur ; Suvi Arola, Auteur ; Päivi Laaksonen, Auteur Année de publication : 2020 Article en page(s) : p. 4-14 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adsorption
Analyse spectrale
CelluloseLa cellulose est un glucide constitué d'une chaîne linéaire de molécules de D-Glucose (entre 200 et 14 000) et principal constituant des végétaux et en particulier de la paroi de leurs cellules.
Chromatographie en phase liquide à hautes performances
Colorants -- Absorption
Colorants -- Adsorption
Colorants végétaux
Ecorces
Etalonnage
Extraction (chimie)
Mordançage (teinture)
Saules et constituants
TeintureIndex. décimale : 667.3 Teinture et impression des tissus Résumé : A semi-quantitative study of willow bark dye adsorption on two different cellulose materials using biomordants was carried out. The studied celluloses were microcrystalline cellulose (MCC) AaltoCell and regenerated Ioncell-F (IC) fibres. The dye was a hot water extract of willow bark and the adsorption to cellulose was carried out using carboxylic acid-containing biomordants, namely, oxalic acid, citric acid and tannic acid. Alum was employed as the reference mordant. A semi-quantitative estimation of the dye uptake was conducted using high-performance liquid chromatography equipped with a diode array detector and also by visual inspection, as well as an evaluation of the coloration using CIELab parameters. The mechanism of the dye adsorption on the cellulose surfaces was studied via Fourier Transform–infrared spectroscopy. According to the results, MCC had a higher affinity for polyphenolic dye than the regenerated cellulose fibres. Dye uptake on MCC was 50%-80% and 44%-57% on IC. For MCC, the biomordants improved the dye uptake more effectively than the control mordant, alum, whereas for IC the biomordants were less effective than alum. Note de contenu : - EXPERIMENTAL : Cellulose materials - Dye materials and chemicals - Dye extraction - Dyeing of cellulosic materials - Preparation of HPLC samples - Spectrophotometric measurements - HPLC-DAD-MS analysis - Calibration curves - Calculation of dye adsorption
- RESULTS AND DISCUSSION : Spectrophotometric characterisation of WBE - Composition of the WBE solutions - Dyeing of cellulosic materials - Dye adsorption efficiencyDOI : https://doi.org/10.1111/cote.12442 En ligne : https://onlinelibrary.wiley.com/doi/epdf/10.1111/cote.12442 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33695
in COLORATION TECHNOLOGY > Vol. 136, N° 1 (02/2020) . - p. 4-14[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21546 - Périodique Bibliothèque principale Documentaires Disponible Bonding medical devices with UV-curable adhesives / Edward R. Perez in ADHESIVES AGE, Vol. 37, N° 9 (08/1994)
[article]
Titre : Bonding medical devices with UV-curable adhesives Type de document : texte imprimé Auteurs : Edward R. Perez, Auteur Année de publication : 1994 Article en page(s) : p. 25-29 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Adhésifs -- Séchage sous rayonnement ultraviolet
Adhésifs à usages médicaux
Adsorption
Collage
Diffusion (physique)
Encollage
Epoxydes
Matériel médical
Polyacrylates
Polyacryliques
Polymères en médecine
Polyuréthanes
ThermoplastiquesUne matière thermoplastique désigne une matière qui se ramollit (parfois on observe une fusion franche) d'une façon répétée lorsqu'elle est chauffée au-dessus d'une certaine température, mais qui, au-dessous, redevient dure. Une telle matière conservera donc toujours de manière réversible sa thermoplasticité initiale. Cette qualité rend le matériau thermoplastique potentiellement recyclable (après broyage). Cela implique que la matière ramollie ne soit pas thermiquement dégradée et que les contraintes mécaniques de cisaillement introduites par un procédé de mise en forme ne modifient pas la structure moléculaire.Index. décimale : 668.3 Adhésifs et produits semblables Résumé : This article discusses on part acrylic-based radiation curable adhesives recently designed for bonding engineering thermoplastics, metal and glass. The durability, processability and physical properties of the adhesives are compared to traditional methods. Note de contenu : - CURRENT TECHNOLOGY : Ultrasonic and heat welding - Epoxies and polyurethanes - Solvent welding
- RADIATION CURABLE ADHESIVES : Mechanical interlock - Physical adsorption - molecular diffusion
- FROM LIQUID TO SOLID : General chemistry
- CHOOSING A CURE SYSTEM
- RADIATION CURABLE ADHESIVESEn ligne : https://drive.google.com/file/d/13Qeoi7pILIdQ_0dEWMQ1eB-GwUJAeJF2/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=20856
in ADHESIVES AGE > Vol. 37, N° 9 (08/1994) . - p. 25-29[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001042 - Périodique Bibliothèque principale Documentaires Disponible Building blocks for stable paints / Stefan Mößmer in EUROPEAN COATINGS JOURNAL (ECJ), N° 02/2010 (02/2010)
[article]
Titre : Building blocks for stable paints : Effects of anchoring groups and copolymer structure of additives studied Type de document : texte imprimé Auteurs : Stefan Mößmer, Auteur ; Monika Roch, Auteur ; Bernd Göbelt, Auteur ; Sabine Johann, Auteur Année de publication : 2010 Article en page(s) : p. 28-31 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Adsorption
Copolymères séquencés
Dispersions et suspensions
Pigments
PolyacrylatesIndex. décimale : 667.9 Revêtements et enduits Résumé : Dispersion - The stabilising effect of polyacrylate block copolymers on pigment dispersion is shown to depend both on the chemical anchoring groups and on the type of pigment dispersed. A highly regular polymer architecture also helps to produce more stable adsorption on the pigment surface. En ligne : https://drive.google.com/file/d/1g-HWALpqMBEilW0NGY0ctEJg1mylEnzr/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=8275
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 02/2010 (02/2010) . - p. 28-31[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 011941 - Périodique Bibliothèque principale Documentaires Disponible Cattail fiber and its potential applications / Thangavelu Karthik in MAN-MADE FIBERS INTERNATIONAL, Vol. 73, N° 1 (2023)
[article]
Titre : Cattail fiber and its potential applications Type de document : texte imprimé Auteurs : Thangavelu Karthik, Auteur Année de publication : 2023 Article en page(s) : p. 26-27 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Absorption
Adsorption
Composites à fibres végétales
Fibres cellulosiques
Fibres de typhaLes massettes ou Typha sont des plantes monocotylédones, également appelées quenouilles, typiques des bords des eaux calmes, des fossés, des lacs, des marais et plus généralement dans les milieux humides. Elles poussent en colonies denses dans les roselières, formant, lorsque cette formation végétale n'est formée que de massettes, une typhaie. Typha est l'un des deux ou trois genres de la famille des Typhacées.
Elles ont une large aire de répartition des régions tempérées et tropicales. L'espèce la plus répandue est Typha latifolia qu'on trouve dans les régions tempérées de l'hémisphère nord. Typha angustifolia est quant à elle tout aussi répandue, bien qu'elle s'avance moins au nord. On trouve Typha domingensis plutôt au sud, elle s'étend des États-Unis jusqu'en Amérique du Sud. On la trouve également à l'état indigène en Nouvelle-Calédonie. Typha laxmannii, Typha minima et Typha shuttleworthii sont confinées à l'Asie et à quelques régions du sud de l'Europe. On trouve également Typha domingensis sur les bords du fleuve Sénégal (entre la Mauritanie et le Sénégal).
- Noms vernaculaires : Sesca / Sesque est le nom gascon des massettes, en concurrence avec l'Iris des marais. Des toponymes sont formés à partir de ce mot, cf. les communes françaises de Cescau (Ariège et Pyrénées-Atlantiques). On désigne aussi ces plantes sous le nom de quenouilles, notamment au Québec où le nom « massette » est inconnu.
La massette est parfois appelée à tort "roseau".
- Description : Les massettes sont des plantes de milieux humides qui possèdent un rhizome et des tiges uniques, non rameuses, persistant longtemps. Leurs très longues feuilles glauques partant en touffe de la base (feuilles engainantes), renferment une moelle blanche comestible. Elles ont une inflorescence terminale typique au bout d'une tige florifère : épi floral dense et en forme de quenouille, dans laquelle les fleurs femelles et mâles sont clairement séparées (monoécie ou diécie). L'inflorescence des espèces monoïques figure deux épis contigus ou séparés par un intervalle : au-dessus l'inflorescence mâle plus claire, caduque, composée d'étamines et de poils blanchâtres ; au-dessous l'épi longuement cylindrique des fleurs femelles, composé de très nombreuses graines duveteuses. Les fruits sont des petits akènes plumeux.
Elles peuvent former des peuplements monospécifiques et devenir invasives pour différents milieux naturels, ou être associées à des roseaux, l'iris des marais ou la Patience d'eau avec qui elles bordent canaux et fossés
Les massettes sont comestibles : le rhizome charnu cru (salade, confit dans le vinaigre) ou cuit après avoir été pelé, était jadis employé contre le scorbut et, distillé, pour aromatiser une eau-de-vie. Les très jeunes pousses, la base des feuilles, l'inflorescence femelle avant maturité, sont également consommées crues, cuites à la vapeur ou grillées, de même que le pollen des fleurs mâles, les graines (mais elles sont petites et couvertes d'un duvet)On peut extraire des feuilles des fibres utilisables pour la fabrication de textile ou de papier. (Wikipedia)
Fibres végétales
Huiles et graisses
Morphologie (matériaux)Index. décimale : 677.46 Cellulosiques : rayonnes, acetates Résumé : The development of new natural fibers has become one of the research focuses in material fields due to the shortage of resources and environmental pollution problems in recent years. The natural cellulose materials are the most abundant renewable resources in the world, among which the plant fibers in a wide variety of forms are predominantly used as the leading materials in textile applications. Cattail (Typha spp.) is a plant that thrives in wet soil (e.g. marshes, draining ditches) and on the borders of water basins like lakes, old river beds, and ponds. Short, fluffy fibers are obtained from the cylindrical flowers of cattail plants, Typha latifolia and Typha augustifolia. Cattails are found in wetlands and swampy areas. Typha is an iconic wetland plant found all over the world. The cattail fibers are used for filling pillows, upholstery, and life jackets. Note de contenu : - Cattail fiber
- Characteristics of cattail fiber
- Application of cattail fiber in oil sorption
- Application of cattail fiber in composites
- Fig. 1 : A) Cattail plant - B) Green cattail fruit - C) Matured cattail fruit
- Fig. 2 : Morphology of cattail fiber
- Fig. 3 : Oil absorbed on the surface of cattle fiberEn ligne : https://drive.google.com/file/d/1hFlQIIDL5QGgYv13aYErJwhiIU7Ee-sG/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=39129
in MAN-MADE FIBERS INTERNATIONAL > Vol. 73, N° 1 (2023) . - p. 26-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23942 - Périodique Bibliothèque principale Documentaires Disponible Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption : a review / Ruoshi Zhang in JOURNAL OF LEATHER SCIENCE AND ENGINEERING, Vol. 2 (Année 2020)
PermalinkChemisorption and physical adsorption of light stabilizers on pigment and ultrafine particles in coatings / G. Haacke in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 71, N° 888 (01/1999)
PermalinkChimie interfaciale et préparation des catalyseurs supportés / Jean-François Lambert in L'ACTUALITE CHIMIQUE, N° 5-6 (05-06/2002)
PermalinkLa chimie organométallique de surface / Frédéric Lefebvre in L'ACTUALITE CHIMIQUE, N° 5-6 (05-06/2002)
PermalinkChrome adsorption characteristics of Yue village soil fertilized with tannery sludge / Ding Shaolan in JOURNAL OF THE SOCIETY OF LEATHER TECHNOLOGISTS & CHEMISTS (JSLTC), Vol. 98, N° 4 (07-08/2014)
PermalinkA cleaner Al2O3-ZrO2/MMT nanocomposite adsorbent based on Al-Zr tanning waste / E. Tao in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CIX, N° 11 (11/2014)
PermalinkClimate control in shipyards / Don Schnell in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 34, N° 2 (02/2017)
PermalinkColles à carrelage. Plaques de béton pour essais - Norme NF EN 1323 / Association Française de Normalisation (Paris) / Saint-Denis La Plaine : Association Française de Normalisation (AFNOR) (1998)
PermalinkColloid chemistry, part I : Definitions and concepts / Vladimir V. Verkholantsev in EUROPEAN COATINGS JOURNAL (ECJ), N° 4/97 (04/1997)
PermalinkComparative sorption isotherms for colorants present in Dyers’ madder (Rubia tinctorum L.) provide new insights into historical dyeing / Lauren Ford in COLORATION TECHNOLOGY, Vol. 134, N° 1 (02/2018)
PermalinkComparative study of four different flavonoid compounds-containing plant extracts functionalised waste wool for accelerating aqueous chromium(VI) reductive removal / Jiayu Gu in COLORATION TECHNOLOGY, Vol. 138, N° 1 (02/2022)
PermalinkComposite coating composed of zeolite Y (FAU) and binder prepared from bis(triethoxysilyl)ethane / Nicolas Brockmann in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 1 (01/2017)
PermalinkConséquences de l'oxydation sur l'absorption d'eau dans les matrices PEEK et PEI / Emilie Courvoisier in MATERIAUX & TECHNIQUES, Vol. 108, N° 2 (2020)
PermalinkContribution à l'étude des phases adsorbées / Gabriel Boutillon / 1955
PermalinkContribution à l'étude sur une alumine et sur un gel de silice des propriétés de l'eau superficielle / Marcel Eyraud / 1965
Permalink