Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Thermoplastic blends of PP and waste rubber powder : Effects of compatibilizer on tensile properties, thermal behavior and decomposition kinetics / J.-N. Yan in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIII, N° 4 (08/2018)
[article]
Titre : Thermoplastic blends of PP and waste rubber powder : Effects of compatibilizer on tensile properties, thermal behavior and decomposition kinetics Type de document : texte imprimé Auteurs : J.-N. Yan, Auteur ; S.-B. Nie, Auteur ; X.-H. Huang ; G.-X. Ding ; J.-B. Zhu Année de publication : 2018 Article en page(s) : p. 460-470 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Alliages polymères
Alliages polymères -- propriétés mécaniques
Aminopropyltriethoxysilane
Analyse thermique
Anhydride maléique
Caoutchouc
Caoutchouc -- Recyclage
Caractérisation
Cinétique chimique
Ethylène
Greffage (chimie)
Polypropylène
Poudres
Stabilité thermiqueIndex. décimale : 668.4 Plastiques, vinyles Résumé : To improve the performances of waste rubber powder filled polypropylene (PP/WRP) blends, WRP was modified by γ-aminopropyltriethoxysilane (APTES) via mechano-chemical method, and then maleic anhydride (MAH) grafted PP (mPP) and MAH grafted ethylene-α-octene copolymer (mEOC) were chosen as the interfacial compatibilizers. The PP/WRP blends were prepared by melt-compounding and compression, and their morphological structures, tensile properties and thermal behavior were investigated carefully. Results showed that modification of APTES decreased the surface energy of WRP and facilitated its compatibility to PP. Both mPP and mEOC could further enhance their interfacial bonding and mPP was superior to mEOC in increasing the tensile strength and elastic modulus. Thermal analysis revealed relative lower melting temperature and crystallinity but higher activation energy for PLA/WRP blends in comparison to pristine PP. Note de contenu : - EXPERIMENTAL : Raw materials - Fabrication of samples - Characterization
- RESULTS AND DISCUSSION : Characterization on the modification of WRP - Morphological structures - Tensile properties - Melt behavior - Thermal stability - Kinetics analysis on the thermal decomposition
- Table 1 : Elemental compositions of the surface of uWRP and WRP by XPS analysis
- Table 2 : Surface energy (γ) and its dispersing (γd) and polar (γp) components for the investigated materials
- Table 3 : Calculated interfacial energies (γAB) for all the possible pairs
- Table 4 : Characteristic parameters of pristine PP and the blends
- Table 5 : Reaction order (n) and activation energy (E) for various samples calculated by Kissinger and Carrasco methodsDOI : 10.3139/217.3439 Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30885
in INTERNATIONAL POLYMER PROCESSING > Vol. XXXIII, N° 4 (08/2018) . - p. 460-470[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20077 - Périodique Bibliothèque principale Documentaires Disponible Thermotropic, side-chain ordered polymeric coatings : gas permeability switching via a thermal stimulus / James Goetz in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 2 (03/2014)
[article]
Titre : Thermotropic, side-chain ordered polymeric coatings : gas permeability switching via a thermal stimulus Type de document : texte imprimé Auteurs : James Goetz, Auteur ; Sergei Nazarenko, Auteur Année de publication : 2014 Article en page(s) : p. 123-139 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
Cristaux liquides thermotropes
Fluoropolymères
Gaz
Membranes (technologie)
Perméabilité
Perméation
Polyacrylates
Polymères ramifiésIndex. décimale : 667.9 Revêtements et enduits Résumé : Rapid access to large areas of stimuli-responsive materials is attractive in the field of membrane science for purification systems and molecular valves. Thermotropic liquid crystalline (LC) systems show sharp property changes through the smectic–LC transition induced by temperature. Comparison of similar amorphous and liquid crystalline systems allows for the elucidation of the characteristics of the LC phase. Lightly crosslinked C6F13 and C8F17 perfluorinated side-chain acrylate networks were UV cured as thin films resulting in amorphous and thermotropic liquid crystalline thin films, respectively. Thermal and morphological characterization indicates a restructuring of the liquid crystalline phase through the isotropic transition giving rise to an increase in transport and free volume properties. The amorphous film showed no dramatic change in transport or free volume properties. Note de contenu : - EXPERIMENTAL : Material - Characterization
- RESULTS AND DISCUSSION : Solid state structure - Transport and free volume behaviorDOI : 10.1007/s11998-013-9518-y En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-013-9518-y.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21147
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 11, N° 2 (03/2014) . - p. 123-139[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16196 - Périodique Bibliothèque principale Documentaires Disponible Thin films of cyclotriphosphazenes containing 1,3,4-oxadiazoles as fluorophores / Martín Caldera-Villalobos in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 1 (01/2022)
[article]
Titre : Thin films of cyclotriphosphazenes containing 1,3,4-oxadiazoles as fluorophores Type de document : texte imprimé Auteurs : Martín Caldera-Villalobos, Auteur ; Ana M. Herrera-González, Auteur ; Violeta Álvarez-Venicio, Auteur ; Miriam Martins-Alho, Auteur ; Margarita Rivera, Auteur ; M. del Pilar Carreón-Castro, Auteur Année de publication : 2022 Article en page(s) : p. 295–302 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Caractérisation
Composés hétérocycliques
Couches minces
Matériaux -- Propriétés optiques
Nanotechnologie
Revêtement par centrifugation
SemiconducteursIndex. décimale : 667.9 Revêtements et enduits Résumé : In this work, hexa-substituted cyclotriphosphazenes bearing 1,3,4-oxadiazole groups as fluorophores were employed in the formation of thin films. The cyclotriphosphazenes compounds as well as the films exhibited photoluminescence with emission in the UV-blue region. Fluorescence quantum yields of cyclotriphosphazenes range between 0.04 and 0.10. The bandgap of cyclotriphosphazenes was 4 eV showing properties of wide bandgap semiconductors. The morphological characterization of the films by SEM and AFM showed homogeneous surfaces without defects. The optical properties of cyclotriphosphazenes are different when they are in solution and thin films because of favorable binding supramolecular interactions. In thin films, the supramolecular interaction enhances the optical properties of these materials. Note de contenu : - EXPERIMENTAL SECTION : Materials - Thin films - Optical properties
- RESULTS AND DISCUSSION : Optical characterization in solution- Optical characterization in thin films - Morphologic characterization
- Table 1 : Optical properties of cyclotriphosphazenes bearing 1,3,4-oxadiazoles in solution (5 × 10−6 M in chloroform-DMF 19:1)
- Table 2 : Optical properties of cyclotriphosphazenes bearing 1,3,4-oxadiazoles in thin films
- Table 3 : Morphological characteristics of cyclotriphosphazenes in thin filmsDOI : https://doi.org/10.1007/s11998-021-00524-7 En ligne : https://link.springer.com/content/pdf/10.1007/s11998-021-00524-7.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37159
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 19, N° 1 (01/2022) . - p. 295–302[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23313 - Périodique Bibliothèque principale Documentaires Disponible Titanium dioxide grafted with silane coupling agents and its use in blue light curing ink / Lili Wang in COLORATION TECHNOLOGY, Vol. 136, N° 1 (02/2020)
[article]
Titre : Titanium dioxide grafted with silane coupling agents and its use in blue light curing ink Type de document : texte imprimé Auteurs : Lili Wang, Auteur ; Xiaying Jiang, Auteur ; Chenglong Wang, Auteur ; Yi Huang, Auteur ; Yiding Meng, Auteur ; Jianzhong Shao, Auteur Année de publication : 2020 Article en page(s) : p. 15-22 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Angle de contact
Bleu (couleur)
Caractérisation
Dioxyde de titane
Dispersions et suspensions -- Stabilité
Encre
Encre -- Propriétés mécaniques
Fourier, Spectroscopie infrarouge à transformée de
Granulométrie
Greffage (chimie)
Photoréticulation
Réaction de couplage
Rhéologie
Silanes
ThermogravimétrieIndex. décimale : 667.2 Colorants et pigments Résumé : To improve the properties of titanium dioxide particles and realise their firm anchorage in blue light curing film, three modified titanium dioxide particles were prepared by grafting 3-(trimethoxysilyl)propyl methacrylate, 3-aminopropyltriethoxysilane and hexadecyltrimethoxysilane. The surface changes of titanium dioxide particles after modification were characterised. The dispersion stability, photo-polymerisation, rheological and mechanical properties of modified titanium dioxide blue light curing inks were investigated. Results showed that compared with native titanium dioxide, modified titanium dioxide particles were more appropriate for blue light curing ink. The particle sizes of the three modified titanium dioxide particles became smaller, their surfaces exhibited hydrophobicity, and the viscosity of the modified titanium dioxide inks decreased slightly. Of the three modified titanium dioxide particles, 3-(trimethoxysilyl)propyl methacrylate- and hexadecyltrimethoxysilane-modified titanium dioxide particles exhibited better dispersion stability in blue light curing ink. In particular, 3-(trimethoxysilyl)propyl methacrylate-modified titanium dioxide blue light curing ink showed the best photo-polymerisation and mechanical properties, which indicated the participation of the pigment grafted by double bonds in the blue light curable polymerisation. Using modified titanium dioxide in blue light curing ink, the dry/wet rubbing fastness of the printed fabrics improved. Note de contenu : - EXPERIMENTAL : Materials - Grafting of silane coupling agent onto the surface of titanium dioxide particles - Preparation of blue light curing ink - Preparation of blue light curing - Characterisations
- RESULTS AND DISCUSSION : FT-IR spectroscopy of modified titanium dioxide - Thermogravimetric analysis of modified titanium dioxide - Elemental analysis of modified titanium dioxide - Particle size analysis of modified titanium dioxide - Contact angle analysis of modified titanium dioxide - Dispersion stability of modified titanium dioxide - Rheological porperties of modified titanium dioxide bluelight curing inkDOI : https://doi.org/10.1111/cote.12434 En ligne : https://onlinelibrary.wiley.com/doi/epdf/10.1111/cote.12434 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33696
in COLORATION TECHNOLOGY > Vol. 136, N° 1 (02/2020) . - p. 15-22[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21546 - Périodique Bibliothèque principale Documentaires Disponible Toughened poly(butylene succinate)/polylactide/poly(vinyl acetate) ternary blend without sacrificing the strength / Wei Miao in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 5 (2022)
[article]
Titre : Toughened poly(butylene succinate)/polylactide/poly(vinyl acetate) ternary blend without sacrificing the strength Type de document : texte imprimé Auteurs : Wei Miao, Auteur ; Wenxi Cheng, Auteur ; Shanhong Xu, Auteur ; Renjie Wang, Auteur ; Jiaheng Yao, Auteur ; Weiqiang Song, Auteur ; Haowei Lin, Auteur ; Mengya Shang, Auteur ; Xuefei Zhou, Auteur Année de publication : 2022 Article en page(s) : p. 541-548 Langues : Anglais (eng) Catégories : Alliages polymères
Alliages polymères -- propriétés mécaniques
Biopolymères -- Propriétés mécaniques
Caractérisation
Polyacétate de vinyle
Polybutylène succinate
Polylactique, AcideL'acide polylactique (anglais : polylactic acid, abrégé en PLA) est un polymère entièrement biodégradable utilisé dans l'alimentation pour l'emballage des œufs et plus récemment pour remplacer les sacs et cabas en plastiques jusqu'ici distribués dans les commerces. Il est utilisé également en chirurgie où les sutures sont réalisées avec des polymères biodégradables qui sont décomposés par réaction avec l’eau ou sous l’action d’enzymes. Il est également utilisé pour les nouveaux essais de stent biodégradable.
Le PLA peut-être obtenu à partir d'amidon de maïs, ce qui en fait la première alternative naturelle au polyéthylène (le terme de bioplastique est utilisé). En effet, l'acide polylactique est un produit résultant de la fermentation des sucres ou de l'amidon sous l'effet de bactéries synthétisant l'acide lactique. Dans un second temps, l'acide lactique est polymérisé par un nouveau procédé de fermentation, pour devenir de l'acide polylactique.
Ce procédé conduit à des polymères avec des masses molaires relativement basses. Afin de produire un acide polylactique avec des masses molaires plus élevées, l'acide polylactique produit par condensation de l'acide lactique est dépolymérisé, produisant du lactide, qui est à son tour polymérisé par ouverture de cycle.
Le PLA est donc l’un de ces polymères, dans lequel les longues molécules filiformes sont construites par la réaction d’un groupement acide et d’une molécule d’acide lactique sur le groupement hydroxyle d’une autre pour donner une jonction ester. Dans le corps, la réaction se fait en sens inverse et l’acide lactique ainsi libéré est incorporé dans le processus métabolique normal. On obtient un polymère plus résistant en utilisant l'acide glycolique, soit seul, soit combiné à l’acide lactique.Index. décimale : 668.4 Plastiques, vinyles Résumé : In this paper, poly(butylene succinate) (PBS)/polylactide (PLA)/poly(vinyl acetate) (PVAc) ternary blends were prepared via directly blending. The content of PBS in each sample was fixed at 30 wt% and that of PVAc was different, 2, 4 or 6%. PBS/PLA (30/70, g/g) and PLA/PVAc (66/4, g/g) were also prepared for comparison. XRD and DSC results showed that PVAc was miscible with PLA, and the crystallinity (X c ) of PLA in PBS/PLA increased by adding PBS, but X c of PBS and PLA in PBS/PLA/PVAc ternary blends reduced by adding PVAc. SEM images showed that PBS was dispersed as droplets in each blend The addition of PVAc improved the compatibility between PBS and PLA, and the fracture surfaces of the ternary blends became rougher than that of PBS/PLA. The tensile and impact tests results showed that PVAc could enhance PLA and the highly toughened PBS/PLA blend. Finally, PBS/PLA/PVAc blend with 2% of PVAc was highly toughened without sacrificing its strength. Its strength was the same as that of PBS/PLA, while the elongation at break and impact strength of the former were 2.8 and 2.5 times those of the latter. Note de contenu : - EXPERIMENTAL : Materials - Sample preparation - X-ray diffraction (XRD) analysis - Differential scanning calorimetry (DSC) - Scanning electron microscopy (SEM) - Tensile and impact properties
- RESULTS AND DISCUSSION : XRD analysis - DSC analysis - Morphologies of the blends - Tensile properties and impact strength
- Table 1 : Partial parameters of the PLA component in PBS/PLA and PBS/PLA/PVAc blends on DSC curves
- Table 2 : Tensile properties of neat PLA, PBS/PLA, PBS/PLA/PVAc blends and PLA/PVAc6DOI : https://doi.org/10.1515/ipp-2022-4219 En ligne : https://drive.google.com/file/d/1uEyMULhgqMD9qVdlV0AvGBdzxZu1mLXV/view?usp=share [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=38328
in INTERNATIONAL POLYMER PROCESSING > Vol. 37, N° 5 (2022) . - p. 541-548[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23740 - Périodique Bibliothèque principale Documentaires Disponible Toward high glass-transition temperatures in epoxy powder coatings based on BTDA / Vinay Mishra in COATINGS TECH, Vol. 20, N° 4 (07-08/2023)
PermalinkToward thermoformed metal-plastic hybrids / Dominik Müller in KUNSTSTOFFE INTERNATIONAL, Vol. 109, N° 8 (08/2019)
PermalinkTowards gradient structures in fluorinated acrylate and polyacrylate blend emulsions / Zhaoxia Yin in SURFACE COATINGS INTERNATIONAL, Vol. 101.4 (08-09/2018)
PermalinkUn TP de chimie organique au CNAM de Lyon / Thierry Hamaide in L'ACTUALITE CHIMIQUE, N° 10 (10/1999)
PermalinkTPU-based porous heterostructures by combined techniques / Alessandra Longo in INTERNATIONAL POLYMER PROCESSING, Vol. 37, N° 4 (2022)
PermalinkTraitements chimiques et électrochimiques du titane et de ses alliages-caractérisation des surfaces créées. Adhésivité interfaciale dans des composites métal/résine / Alain A. Roche / 1983
PermalinkTransmission reconstruction of transparent solutions using particle swarm optimisation / Elham Farazandemehr in COLORATION TECHNOLOGY, Vol. 138, N° 2 (04/2022)
PermalinkTransparent protection from nanomaterials / Tarek Khalil in EUROPEAN COATINGS JOURNAL (ECJ), N° 6 (06/2022)
PermalinkTransparent ZnO-coated polydimethylsiloxane-based material for photocatalytic purification applications / I. M. Sosnin in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 2 (03/2020)
PermalinkTribological and mechanical performance of epoxy reinforced by fish scales powder / Kifah Ghazi Ali in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 32, N° 3 (06/2022)
PermalinkA tunable controlled-release urea fertilizer coated with a biodegradable polyurethane-nanoclay composite layer / Kannika Sitthisuwannakul in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 2 (03/2023)
PermalinkTuning of final performances of soybean oil-based polymer nanocomposites : effect of styryl/oil functionalized intercalant of montmorillonite reinforcer in INTERNATIONAL POLYMER PROCESSING, Vol. XXX, N° 2 (05/2015)
PermalinkPermalinkTwo-component UV-curable waterborne CO2-based polyurethane dispersion with outstanding flexibility / Zhu Ding in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 5 (09/2023)
PermalinkTwo-dimensional carbon material incorporated and PDMS-coated conductive textile yarns for strain sensing / G. M. Nazmul Islam in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 20, N° 6 (11/2023)
Permalink