Accueil
KUNSTSTOFFE INTERNATIONAL . Vol. 113, N° 4Mention de date : 2023Paru le : 22/05/2023 |
Dépouillements
Ajouter le résultat dans votre panierBone implants straight from the hospital's printer in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 4 (2023)
[article]
Titre : Bone implants straight from the hospital's printer : Project CAMed : implementation of additive manufacturing in the clinical field Type de document : texte imprimé Année de publication : 2023 Article en page(s) : p. 21-23 Langues : Anglais (eng) Catégories : Implants médicaux
Implants osseux
Impression tridimensionnelle
Polycarbonate uréthane
Polyéther imide
Polymères en médecine
ProthèsesIndex. décimale : 668.4 Plastiques, vinyles Résumé : As part of the CAMed project being conducted by the Medical University of Graz, researchers are working on manufacturing custom implants in the hospital itself. This will benefit patients, but also has implications for the hospital because it will thereby become a medical device manufacturer. A key role in the first pilot study is being played by the Arburg Plastic Freeforming (APF) process. Note de contenu : - Hybrid plastic ribs made of PCU
- Cranial implants made of PEI about to enter clinical use
- Qualitymanagement as a matter of urgency
- Entry into sensor technologyEn ligne : https://drive.google.com/file/d/1G8XWFNaj2-agGbGQgYoSf1OTVyg1_MTR/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40146
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 21-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible Pharmaceutical primary packaging with no risk of breakage / Berthold Schopferer in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 4 (2023)
[article]
Titre : Pharmaceutical primary packaging with no risk of breakage : Plastic instead of glass : for greater design freedom and handling safety Type de document : texte imprimé Auteurs : Berthold Schopferer, Auteur Année de publication : 2023 Article en page(s) : p. 24-27 Langues : Anglais (eng) Catégories : Automatisation
Matières plastiques -- Moulage par injection
Médicaments -- Emballages
Moules d'injection
Technologie médicaleIndex. décimale : 668.4 Plastiques, vinyles Résumé : Medication should always be as simple and reliable as possible to handle and administer, both for healthcare personnel and for self-medication. Prefilled syringes and tubes are ideal for this, since they can be provided with the correct doses during production. Use of COC-based materials not only makes it possible to use a greater variety of specific containers, but the manufacturing process is also characterized by high machine and process capability. Note de contenu : - Application example 1 : Primary packaging for a rotavirus vaccine
- Challenging high-precision product design
- Application example 2 : Multi-component medicationcontainers
- Continuous aseptic production
- Application example : double quick-change system for pipette tips
- Fig. 1 : The risk of incorrect administration is reduced by the design of the tube applicator
- Fig. 2 : The multicomponent pharmaceutical container undergoes aseptic production without sterilization
- Fig. 3 : The heater can be disconnected via the cable and each block, including the heating element, removed individually in a few steps
- Fig. 4 : A core can be rapidly exchanged if it breaks during productionEn ligne : https://drive.google.com/file/d/1pgzdCYYcltMi9MgIVOiN9H6T7SUnAyP3/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40147
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 24-27[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : The great art of small parts : Micro injection molding in medical technology Type de document : texte imprimé Auteurs : Thorsten Schnell, Auteur ; Marco Kwiatkowski, Auteur Année de publication : 2023 Article en page(s) : p. 30-31 Langues : Anglais (eng) Catégories : Canaux chauffants
Matériel médical
Matières plastiques -- Moulage par micro-injection
Polymères en médecineIndex. décimale : 668.4 Plastiques, vinyles Résumé : Precision plastic parts featuring extremely fine structures are found in many medical technology applications. Whether they be minimally invasive surgical techniques, new types of implants or modern analytical methods: all are benefiting enormously from micro injection molding. To enable this process to realize its potential both cost- and energy-efficiently, Günther Heisskanaltechnik has come up with a special valve-gate system. Note de contenu : - Challenge accepted
- Precision control for micro injection molded parts
- Greater flexibility and energy efficiencyEn ligne : https://drive.google.com/file/d/1L3JLtIR07hcoX5WMN6TU6PGFXYTX-SON/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40148
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 30-31[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible Listening to defects with bat ears / Kai-Uwe Kohn in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 4 (2023)
[article]
Titre : Listening to defects with bat ears : Detecting defects in fiber composite structure Type de document : texte imprimé Auteurs : Kai-Uwe Kohn, Auteur ; Yannick Bernhardt, Auteur ; Julian Ehrler, Auteur Année de publication : 2023 Article en page(s) : p. 34-36 Langues : Anglais (eng) Catégories : Composites -- Analyse
Composites à fibres
Contrôle non destructif
Détection de défauts (Ingénierie)
Mesure -- Instruments
Résonance des défauts locauxIndex. décimale : 668.4 Plastiques, vinyles Résumé : A newly developed method will make it possible to detect defects in fiber-reinforced plastic structures over large areas without contact and in a matter of seconds. The method uses what is known as local defect resonance: Defects such as impact damages have a specific resonant frequency that oscillate with a higher amplitude compared to the surrounding area. This local oscillation can be located within seconds using an advanced microphone system. Note de contenu : - 72 microphones and a camera : How the method works
- A typical test setup
- Conclusion : Fast and cheap aleternative for touch-sensitive parts
- Fig. 1 : The left picture shows the measurement setup for vibration characterization of a flat-bottom hole plate by using a laser Doppler vibrometer. The right side shows the test result (RMS): The thinner the residual wall thickness, the higher the measured vibration speed
- Fig. 2 : Typical test setup with the new measuring method for testing the local defect resonance with an acoustic camera and vacuum shaker
- Fig. 3 : Test result: In the center, the impact damage is clearly visible. The signal on the right side is from the vacuum shaker
- Fig. 4 : Test result of the PMMA plate with flat bottom holes by using a vacuum shaker and acoustic cameraEn ligne : https://drive.google.com/file/d/1kPfveHtFH5RsRnetCV9lEhHILHDMWIte/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40149
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 34-36[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Measuring transparent surfaces : 3D metrology Type de document : texte imprimé Auteurs : Andreas Thoss, Auteur Année de publication : 2023 Article en page(s) : p. 38-39 Langues : Anglais (eng) Catégories : Lasers -- Applications industrielles
Mesure -- Instruments
Polymères -- Surfaces
Rayonnement infrarouge
Transparence (optique)Index. décimale : 668.4 Plastiques, vinyles Résumé : The surface shape of glossy or transparent objects is difficult or impossible to determine with the aid of conventional optical measurement technology. A team from Fraunhofer IOF has solved this problem by developing a 3D sensor that uses thermal radiation instead of visible light. By projecting several stripes onto the surface with an infrared laser, they can measure the surface with a thermal imaging camera to an accuracy of 10 μm. Note de contenu : - The challenge : Capturing "uncooperative" objects
- The solution : Narrow stripes create high contrast
- Possible applications for the new systemEn ligne : https://drive.google.com/file/d/1CJ7T3QY0pdJ_a4oWNPdHq6H53v3YPdFj/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40150
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 38-39[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible Glass parts from an injection molding machine / Dorothea Helmer in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 4 (2023)
[article]
Titre : Glass parts from an injection molding machine : Novel material made of high-purity quartz glass can be processed like a thermoplastic Type de document : texte imprimé Auteurs : Dorothea Helmer, Auteur ; Clemens Kastner, Auteur Année de publication : 2023 Article en page(s) : p. 40-43 Langues : Anglais (eng) Catégories : Quartz
Verre -- Moulage par injectionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Glass is a high-performance material with properties that are indispensable for many industries. High-precision molded parts made of glass are required in the optics, chemical and medical technology industries. However, traditional glass-processing methods impose limits on parts design, especially for tiny structures. Here, injection molding offers an alternative that is also more energy-efficient, more economical and more sustainable. Glassomer and Engel are jointly tapping into this potential. Note de contenu : - Novel granulate made from high-purity quartz glass
- Targeted control over surface properties
- Manufacturing process requires precision
- Parts of the highest purity and optical quality
- A collaboration with a future
- Fig. 1 : Traditional glass-manufacturing methods compared with the Glassomer process (A): grinding, polishing and lapping (B), precision glass molding (C), conventional lithography and etching processes for fabricating glass structures at wafer level (D), laser-assisted structuring and downstream etching and polishing (E)
- Fig. 2 : The various process steps from granulate to injection-molded “green” part to ready-to-use glass part, as exemplified by a perforated plate
- Fig. 3. The multi-stage manufacturing process can produce different surface finishes. As shrinkage can be calculated, a high degree of dimensional accuracy is achieved.
- Fig. 4 : The e-motion TL all-electric, tie-bar-less injection molding machine produces high-precision camera lenses from thermoplastics – and now also glass parts
- Fig. 5 : Different sample parts were produced at Glassomer. The medical technology part (top right) here served as a feasibility study. It showed that the new quartz glass material could also be processed in molds originally designed for thermoplastic injection molding
- Fig 6 : Fine structuring of glass is becoming increasingly important, for example in the field of chemical and pharmaceutical synthesis. High-precision channels can already be produced by the new processEn ligne : https://drive.google.com/file/d/1R_G2lwm8RCt81dTg1s3f8_q-xlIBpJex/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40151
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 40-43[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible Three-dimensional melt flow system in the hot runner manifold block / Simon Wurzbacher in KUNSTSTOFFE INTERNATIONAL, Vol. 113, N° 4 (2023)
[article]
Titre : Three-dimensional melt flow system in the hot runner manifold block : Mass channel design using additive manufacturing opens up quality advantages Type de document : texte imprimé Auteurs : Simon Wurzbacher, Auteur ; Lucas Schulz, Auteur ; Stefan Kruppa, Auteur ; Reinhard Schiffers, Auteur Année de publication : 2023 Article en page(s) : p. 47-51 Langues : Anglais (eng) Catégories : Canaux chauffants
Impression tridimensionnelle
Matières plastiques -- Moulage par injection
Moules d'injectionIndex. décimale : 668.4 Plastiques, vinyles Résumé : The objective of the hot runner design is to ensure that all cavities are supplied with the same melt quality, filling and compression pressures and filling speeds without damaging the melt along the way. The distributor block plays a key role in this process, as it is responsible not only for melt transfer but also for distributing the melt to the individual cavities. Additive manufacturing enables significant improvements in this area – in several dimensions.
Note de contenu : - Manufacturing hot runner manifold blocks
- Challenges for manifolds that deviate from 2x cavities
- Experimental setup of a six-cavity test mold
- Numerical analysis of the conventional design
- Design of a three-dimensional manifold system
- Significantly faster purging process
- Fig. 1 : Possibilities of melt channel design for naturally balanced manifold blocks in dependence on manifold block manufacturing method
- Fig. 2 : The six-cavity test mold is used to produce simple closure caps as test specimens
- Fig. 3 : Meshing and results of the numerical study of the conventional manifold (double-Y system). In regions of melt division and deflection, zones of low velocity and low wall shear stress are found
- Fig. 4 : Simulation results of three-in-row distribution and comparison of wall shear stresses of drilled and additively manufactured manifold block
- Fig. 5 : Color exchange trials make clear that purging processes are much more effective on the additively manufactured manifold. The injection molding parameters are summarized belowEn ligne : https://drive.google.com/file/d/1T7-o0XnPQwL9IX86W3LJtoebeI04JcxQ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40152
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 47-51[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Health from plastics : Pharmaceuticals incorporated into polymers improve patient therapy Type de document : texte imprimé Auteurs : Zach Fletcher, Auteur ; Ursula Nollenberger, Auteur Année de publication : 2023 Article en page(s) : p. 55-57 Langues : Anglais (eng) Catégories : Dispositifs médicaux
ÉlutionL'élution est un procédé permettant de mettre en solution (dite éluée) un composé adsorbé à l'aide d'un solvant nommé l'éluant.
L'élution est notamment utilisée en chromatographie en phase liquide et en chromatographie sur couche mince (CCM). Elle est également utilisée en immuno-hématologie pour récupérer, dans un éluat, un anticorps fixé spécifiquement sur des hématies.
Médicaments
Polymères en médecine
Technologie médicaleIndex. décimale : 668.4 Plastiques, vinyles Résumé : Medical combination products comprising drugs and medical devices offer simpler and improved therapy options for patients. They facilitate treatment, especially for chronic diseases. They also enable more targeted dosing, which reduces the side effects of drugs. However, the manufacturing of corresponding medical plastic products presents challenges in the selection of material and production process. Note de contenu : - Great market potential for combination products
- Advantages of drug eluting systems
- More targeted and simpler treatments
- Difficult material selection
- Crucial design and production processEn ligne : https://drive.google.com/file/d/1LhO3DTJzhdauBJJfkrqarA03P53I9UmU/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40153
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 55-57[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Flame retardants for biopolymers : Bio-based flame retardancy for electrical & electronic products Type de document : texte imprimé Année de publication : 2023 Article en page(s) : p. 58-59 Langues : Anglais (eng) Catégories : Biopolymères
IgnifugeantsComposé chimique utilisé pour réduire l'inflammabilité. Il peut être incorporé au produit durant sa fabrication ou appliqué ultérieurement à sa surface.
Matières plastiques -- Additifs
PolyamidesUn polyamide est un polymère contenant des fonctions amides -C(=O)-NH- résultant d'une réaction de polycondensation entre les fonctions acide carboxylique et amine.
Selon la composition de leur chaîne squelettique, les polyamides sont classés en aliphatiques, semi-aromatiques et aromatiques. Selon le type d'unités répétitives, les polyamides peuvent être des homopolymères ou des copolymères.
Polylactique, AcideL'acide polylactique (anglais : polylactic acid, abrégé en PLA) est un polymère entièrement biodégradable utilisé dans l'alimentation pour l'emballage des œufs et plus récemment pour remplacer les sacs et cabas en plastiques jusqu'ici distribués dans les commerces. Il est utilisé également en chirurgie où les sutures sont réalisées avec des polymères biodégradables qui sont décomposés par réaction avec l’eau ou sous l’action d’enzymes. Il est également utilisé pour les nouveaux essais de stent biodégradable.
Le PLA peut-être obtenu à partir d'amidon de maïs, ce qui en fait la première alternative naturelle au polyéthylène (le terme de bioplastique est utilisé). En effet, l'acide polylactique est un produit résultant de la fermentation des sucres ou de l'amidon sous l'effet de bactéries synthétisant l'acide lactique. Dans un second temps, l'acide lactique est polymérisé par un nouveau procédé de fermentation, pour devenir de l'acide polylactique.
Ce procédé conduit à des polymères avec des masses molaires relativement basses. Afin de produire un acide polylactique avec des masses molaires plus élevées, l'acide polylactique produit par condensation de l'acide lactique est dépolymérisé, produisant du lactide, qui est à son tour polymérisé par ouverture de cycle.
Le PLA est donc l’un de ces polymères, dans lequel les longues molécules filiformes sont construites par la réaction d’un groupement acide et d’une molécule d’acide lactique sur le groupement hydroxyle d’une autre pour donner une jonction ester. Dans le corps, la réaction se fait en sens inverse et l’acide lactique ainsi libéré est incorporé dans le processus métabolique normal. On obtient un polymère plus résistant en utilisant l'acide glycolique, soit seul, soit combiné à l’acide lactique.Index. décimale : 668.4 Plastiques, vinyles Résumé : Bioplastics are one way of increasing the sustainability of products. However, the flame retardancy requirements of E&E equipment can often not be met with biopolymers. A research project has now succeeded in developing bio-based flame retardants for these plastics. Promising results could be achieved in combination with radiation crosslinking. Note de contenu : - Flame retardancy for PLA
- Radiation crosslinking of bio-PAEn ligne : https://drive.google.com/file/d/1FiKzODDiOrBXy6s1MFA1LsD5gS92nApQ/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40154
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 58-59[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible
[article]
Titre : Simulation of composites' heating : Joining of fiber-reinforced plastic composites Type de document : texte imprimé Auteurs : Lucas Ost, Auteur ; Oleg Shapovalov, Auteur ; Felix Kuke, Auteur ; Nikolay Doynov, Auteur ; Holger Seidlitz, Auteur ; Vesselin Michailov, Auteur ; Marcello Ambrosio, Auteur Année de publication : 2023 Article en page(s) : p. 60-64 Langues : Anglais (eng) Catégories : Assemblages (technologie)
Composites à fibres -- Soudage
Composites à fibres de carbone
Fibres à orientation unidirectionnelle
Polyamide 6
Simulation par ordinateur
Soudage par rayonnement infrarougeIndex. décimale : 668.4 Plastiques, vinyles Résumé : Modern material-compatible joining methods for fiber-reinforced plastics require the heating of the materials. In order to predict the respective complex temperature fields and curves, the Fraunhofer IAP and the BTU Cottbus-Senftenberg have developed numerical methods, which are able to simulate different radiation sources and process sequences as well. Note de contenu : - Heat fluxes and radiation distribution
- Radially symmetric model : temperature prediction at the center of the sample
- Three-dimensional model : Prediction of the temperature distribution
- Comparison of experiment and simulation
- The appropriate radiator distance
- Fig. 1 : Experimental setup for temperature measurements on the bottom (left) and top surface (right) of the FRP plate : the thermographic system arrayed from the bottom on the non-radiated surface is calibrated by a single central thermocouple. Multiple thermocouples distributed over the upper side of the plate provide the measurement on the radiated plate surface
- Fig. 2 : Heat fluxes and radiation distribution in the modeled system: Depending on the distance of the radiator, the radiation distributionchanges
- Fig. 3 : The heat capacity of the examined CFRP depends strongly on the temperature
- Fig. 4 : Comparison between experimentally measured and numerically calculated temperature progressions in the center of both surfaces during and after heating : the values show a high degree of agreement between experiment and radially symmetric FEM-simulation
- Fig. 5 : Comparison of the temperature curves of the top surface between FEM and experiment for different distances from the center of the plate: The radiator distance has a greater influence on the heating rate than the plate thickness
- Fig. 6 : Comparison of the temperature fields on the bottom surface of a 2 mm thick CFRP plate during heating shows a good agreement between FEM (lower image halves) and experiment (upper image halves)En ligne : https://drive.google.com/file/d/1DJyidaXLEYd1gXRuJRFzBGUr4xmP9k3s/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=40155
in KUNSTSTOFFE INTERNATIONAL > Vol. 113, N° 4 (2023) . - p. 60-64[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23959 - Périodique Bibliothèque principale Documentaires Disponible
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
23959 | - | Périodique | Bibliothèque principale | Documentaires | Disponible |