Accueil
CHEMICAL FIBERS INTERNATIONAL . Vol. 72, N° 2Mention de date : 05/2022Paru le : 20/06/2022 |
Dépouillements
Ajouter le résultat dans votre panierDevelopment of glass fiber-PET hybrid yarn for thermoplastic composites / Melis Eldem Heper in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Development of glass fiber-PET hybrid yarn for thermoplastic composites Type de document : texte imprimé Auteurs : Melis Eldem Heper, Auteur Année de publication : 2022 Article en page(s) : p. 69-70 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Composites à fibres
Composites à fibres -- Propriétés mécaniques
Composites thermoplastiques
Essais de résilience
Essais dynamiques
Fibres continues
Fibres de verre
Mélanges de fibres
Polyéthylène téréphtalateIndex. décimale : 677.4 Textiles artificiels Résumé : The interest and demand towards the use of thermoplastic composites have been gradually increasing due to their high damage tolerance, recycling, and energy absorption capability compared to thermoset composites. Despite such positive properties, thermoplastic materials have a negative side, which is their high melt viscosity. The solution to this problem can be achieved by using hybrid yarns in which reinforcement and matrix fibers are homogeneously mixed together. In this work, the aim was to investigate the mechanical properties of thermoplastic composites to be prepared using continuous glass fiber/polyethylene terephthalate (CGF/PET) hybrid yarns in different proportions by volume. CGF/PET hybrid yarns containing glass fiber in different volumes (450/0 and 550/0) were produced, woven and then transformed into thermoplastic composite test plates using hot press. Tensile, 3 point bending and impact tests were used to investigate the mechanical properties. Note de contenu : - Raw materials
- Production of CGF/PET hybrid yarn
- Preparation of CGF/PET fabrics
- Preparation of test samples
- Results
- Conclusion
- Future works
- Table 1 : Properties of glass fiber and PET yarn
- Table 2 : Tensile test results
- Table 3 : 3-point bending test results
- Table 4 : Impact test resultsEn ligne : https://drive.google.com/file/d/1qdLpIlV1hAMtiFD0H2lPXTYwhQmOL0xj/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37759
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 69-70[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible Regenerated cellulose fibers - great potential for sustainable and tough fiber-reinforced composites / Nina Graupner in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Regenerated cellulose fibers - great potential for sustainable and tough fiber-reinforced composites Type de document : texte imprimé Auteurs : Nina Graupner, Auteur ; Jörg Müssig, Auteur ; Tim Huber, Auteur Année de publication : 2022 Article en page(s) : p. 71-74 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Composites à fibres -- Propriétés mécaniques
Composites à fibres -- Recyclage
Composites à fibres de carbone -- Propriétés mécaniques
Durée de vie (Ingénierie)
Fibres cellulosiques
Polylactique, AcideL'acide polylactique (anglais : polylactic acid, abrégé en PLA) est un polymère entièrement biodégradable utilisé dans l'alimentation pour l'emballage des œufs et plus récemment pour remplacer les sacs et cabas en plastiques jusqu'ici distribués dans les commerces. Il est utilisé également en chirurgie où les sutures sont réalisées avec des polymères biodégradables qui sont décomposés par réaction avec l’eau ou sous l’action d’enzymes. Il est également utilisé pour les nouveaux essais de stent biodégradable.
Le PLA peut-être obtenu à partir d'amidon de maïs, ce qui en fait la première alternative naturelle au polyéthylène (le terme de bioplastique est utilisé). En effet, l'acide polylactique est un produit résultant de la fermentation des sucres ou de l'amidon sous l'effet de bactéries synthétisant l'acide lactique. Dans un second temps, l'acide lactique est polymérisé par un nouveau procédé de fermentation, pour devenir de l'acide polylactique.
Ce procédé conduit à des polymères avec des masses molaires relativement basses. Afin de produire un acide polylactique avec des masses molaires plus élevées, l'acide polylactique produit par condensation de l'acide lactique est dépolymérisé, produisant du lactide, qui est à son tour polymérisé par ouverture de cycle.
Le PLA est donc l’un de ces polymères, dans lequel les longues molécules filiformes sont construites par la réaction d’un groupement acide et d’une molécule d’acide lactique sur le groupement hydroxyle d’une autre pour donner une jonction ester. Dans le corps, la réaction se fait en sens inverse et l’acide lactique ainsi libéré est incorporé dans le processus métabolique normal. On obtient un polymère plus résistant en utilisant l'acide glycolique, soit seul, soit combiné à l’acide lactique.
ViscoseIndex. décimale : 677 Textiles Résumé : Regenerated cellulose fibers are manufactured from plant cellulose and have interesting potential in terms of their physical and mechanical properties for use in fiber-reinforced composites. They are biodegradable and are currently used mainly for the production of textiles, hygiene articles, filters and paper. Unlike natural fibers, they can be produced in reproducible quality and are not subject to variations due to cultivation or the environment. Despite all this, their potential for use in composite applications has hardly been exploited to date. Note de contenu : - Regenerated cellulose fibers - potential
- Applications and prototypes
- Durability, degradability and recycling
- Fig. 1 : Regenerated cellulose fi bers with different fineness and cross-sectional shape
- Fig. 2 : Potential of regenerated cellulose fibers (Cordenka type viscose) in injection-molded PLA composites compared to flax fiber-reinforced composites and the unrein-forced PLA matrix : tensile strength, Young's modulus and unnotched Charpy impact strength ; values taken from
- Fig. 3 : Processing, application examples and prototypes
- Fig. 4 : Product life cycle and acceptable recycling options (green), paths to be avoided are highlighted in red ; adapted and expanded graphic to include the aspects of reuse and disposal based onEn ligne : https://drive.google.com/file/d/1k4aY3Hue_XGaRV3hRv3CByHjnbI3Zqdv/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37760
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 71-74[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible Is there still a future for polymer-based fibers for textile applications post COP26 / Hugo Christiaen in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Is there still a future for polymer-based fibers for textile applications post COP26 Type de document : texte imprimé Auteurs : Hugo Christiaen, Auteur Année de publication : 2022 Article en page(s) : p. 75-77 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Fibres polyesters
Polyéthylène téréphtalate
Textiles et tissus -- Industrie -- Aspect de l'environnementIndex. décimale : 677 Textiles Résumé : The global textile fiber market is enormous. The latest full market info dating from 2019 confirms the global textile fiber production to have been a staggering 111 million tons business. Of that total vast number, polyester (PET) fibers represented a share of 52.20/0, or 57.7 million tons. The next biggest category is then claimed by cotton fibers with a share of 23.2% or 25.7 million tons. Fiber production has more than doubled in the last 20 years and is expected to increase by another 30% by 2030 to 146 million tons if business as usual continues. It is impossible with the current technological and economical situation to find suitable and more sustainable alternative fibers to substitute these >50 million tons of PET fibers. A solution to substitute such vast volumes will also not be found within the foreseeable future. Therefore, there is no other choice than to try to cope with the use of PET, and try to find more sustainable ways of dealing with it. Note de contenu : - Plastics in general and PET fibers are not necessarily bad
- Environmental dimensions of materials sustainability
- Carbon footprint impact
- Mitigation strategies to further reduce environmental impact of PET fibers : Life cycle perspective - Full circular solution - Biodegradable PET
- The ultimate solutionEn ligne : https://drive.google.com/file/d/1lzIWUMDmubl1hX-MrOCjoe4qxNPsCOIu/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37761
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 75-77[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible Impact of draw ratio and winder speed on the fiber properties of PET FDY / Ranjit Turukmane in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Impact of draw ratio and winder speed on the fiber properties of PET FDY Type de document : texte imprimé Auteurs : Ranjit Turukmane, Auteur ; Chaitanya Mahajan, Auteur ; Kiran Patil, Auteur Année de publication : 2022 Article en page(s) : p. 78-79 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Biréfringence La biréfringence est la propriété physique d'un matériau dans lequel la lumière se propage de façon anisotrope. Dans un milieu biréfringent, l'indice de réfraction n'est pas unique, il dépend de la direction de polarisation de l'onde lumineuse. (Wikipedia)
Bobinage
Etirage (textile)1. Procédé par lequel on diminue ou augmente la masse surfacique d'une nappe, ou la masse linéique d'un ruban ou d'une mèche.
2. Etirage à chaud ou à froid des filaments continus dans le but d'orienter la structure cristalline des fibres pour en améliorer la ténacité.
Fibres polyesters
Fil entièrement étiré
Polyéthylène téréphtalateIndex. décimale : 677.47 Non cellulosiques : Nylon, acryliques, polyesters, vinyles Résumé : It has been found that spinning machine parameters are the most important factors affecting the final polyethylene terephthalate (PET) filament properties. If the temperature is considered, then low spinning temperature can give higher viscosity, higher flow resistance through the spinneret's nozzle and high die head pressure. The extruded filaments are passed over the heated godets at different speeds to orient and crystallize the molecule by varying the winding speed 4,770, 4,950, 4,500 m/min. The manufactured PET FDY (fully drawn yarn) can be suitable for various end-use applications for high-end undergarments, sportswear and home furnishings. The process optimization helped to develop better filaments that can have a scope to be utilized on a large scale. This project is more oriented toward investigation of the impact of draw ratio and winder speed over the molecule mobilization, fixation and crystallization of drawn filament at standard spinning conditions. It was found that the PET FDY tenacity (3.8, 4.1, 5.7 g/den) increased respectively, whereas elongation (40, 38, 32%) decreased at different draw ratios. Note de contenu : - Birefringence
- Observations
- Table 1 : Effect of winding speed on yarn tenacity & elongationEn ligne : https://drive.google.com/file/d/1zmSovxwXsDwPoRZyT02-Hb_UVgy_kp-m/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37762
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 78-79[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible Acrylic fibers, high-performance fibers, mineral fibers and metal fibers in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Acrylic fibers, high-performance fibers, mineral fibers and metal fibers : Greater European synthetic fiber producers Type de document : texte imprimé Année de publication : 2022 Article en page(s) : p. 80-85 Langues : Anglais (eng) Catégories : Fibres acryliques
Fibres inorganiques
Fibres métalliques
Fibres textiles synthétiques
Matériaux hautes performances
Textiles et tissus -- Industrie et commerce -- RépertoiresIndex. décimale : 677.4 Textiles artificiels Résumé : Starting with PET fibers in edition 3/2021, PA fibers in edition 4/2021, and PE/PE fibers in edition 1/2022 Chemical Fibers International presents an extensive list of European fiber manufacturers, broken down by fiber type and location. The list is based on a survey by our editorial department, on information provided by the companies on their websites and on our own research. included are the companies in Greater Europe (including Russia and Turkey) which manufacture fibers and yarns directly from polymers, regardless of whether these fibers are sold or processed within the company. Pure manufacturers of spunbond and meltblown nonwovens are not included. There is no claim to completeness and correctness of the table.
In this issue we present producers of acrylic fibers (divided into staple fibers, filament yarns, oxidized PAN fibers, modacrylic fibers, recycled PAN fibers), high-performance fibers (divided into SAF fibers, carbon fibers and recycled carbon fibers, aramid fibers, PPS fibers, PI fibers, PEEK fibers, PTFE and PVDF fibers, novoloid fibers) mineral fibers (glass and basalt) and metal fibers. An updated list of European fiber manufacturers will be published at regular intervals.Note de contenu : - Acrylic fibers - PAN staple fibers
- Acrylic fibers - PAN filament yarns
- Acrylic fibers - oxidized PAN fibers
- Acrylic fibers - modacrylic fibers
- Acrylic fibers - recycled PAN fibers
- High-performance fibers - Superabsorbent acrylate fibers
- High-performance fibers - Carbon fibers
- High-performance fibers - Recycled carbon fibers
- High-performance fibers - Aramid fibers
- High-performance fibers - PPS fibers
- High-performance fibers - PI fibers
- High-performance fibers - PEEK fibers
- High-performance fibers - PVDF
- High-performance fibers - Novoloid phenolic fibers
- Mineral fibers - Glass fibers
- Mineral fibers - Basalt fibers
- Metal fibersEn ligne : https://drive.google.com/file/d/1Effjyo9YR7EuFm_0QuOypPK5E-Ihva1H/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37763
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 80-85[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible High-speed elongation rheometer - determination of elongational viscosity / Alexander Bier in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : High-speed elongation rheometer - determination of elongational viscosity Type de document : texte imprimé Auteurs : Alexander Bier, Auteur ; Walter Arne, Auteur ; Schubert, Dirk W., Auteur Année de publication : 2022 Article en page(s) : p. 86-87 Langues : Anglais (eng) Catégories : Filature
Polyméthacrylate de méthyleLe poly(méthacrylate de méthyle) (souvent abrégé en PMMA, de l'anglais Poly(methyl methacrylate)) est un polymère thermoplastique transparent obtenu par polyaddition dont le monomère est le méthacrylate de méthyle (MMA). Ce polymère est plus connu sous son premier nom commercial de Plexiglas (nom déposé), même si le leader global du PMMA est Altuglas International9 du groupe Arkema, sous le nom commercial Altuglas. Il est également vendu sous les noms commerciaux Lucite, Crystalite, Perspex ou Nudec.
Rhéomètres
Viscosité élongationnelleLa viscosité élongationnelle est la viscosité apparaissant lorsqu’une contrainte élongationnelle est appliquée au fluide. (Wikipedia)Index. décimale : 677.47 Non cellulosiques : Nylon, acryliques, polyesters, vinyles Résumé : In many processes like film blowing, film casting or fiber spinning, elongational strain occurs. A vvell-known correlation between shear and elongation was first found by Trouton in 1906 in the low strain area regime, where the elongational viscosity is 3 times higher than the shear viscosity. For the aforementioned processes it is very important to know and understand the occurring elongational viscosities. Hovvever, for high elongation rates the elongational viscosity was not accessible with so far existing methods, examples are the extensional rheometer after Sentmanat (SER), oil bath rheometer after Meissner or tensile rheometer after Münstedt (MTR), with the limitation of elongation rates to a maximum of 10 S-1 those setups are not suitable in the range up to 100 S-1 which are typical in fiber spinning. With the "Rheotens" slightly higher elongation rates can be achieved, but in comparison to the aerodynamic fiber stretching via an aspirator, it is still by far insufficient for an industrial relevant range. Therefore, for proper understanding of fiber spinning a new technique was developed. Note de contenu : - Experimental
- Determination of applied aspirator force
- Determination of the elongational viscosity
- Identified fit parameters to calculate the elongational viscosityEn ligne : https://drive.google.com/file/d/1C7w5FOR-sa8qHyL7Y7VT_342C8PjTL31/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37764
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 86-87[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible Numerical model for the investigation of forces and torques in the twist unit in false-twist texturing / Mathias Schmitz in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Numerical model for the investigation of forces and torques in the twist unit in false-twist texturing Type de document : texte imprimé Auteurs : Mathias Schmitz, Auteur ; Thomas Gries, Auteur Année de publication : 2022 Article en page(s) : p. 88-89 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Fibres textiles -- Propriétés mécaniques
Modèles numériques
Texturation fausse torsionCe procédé continu pour la production de fils texturés permet d'effectuer simultanément trois opérations : la torsion, la fixation et la détorsion. Le fil, provenant d'un enroulement d'alimentation, pénètre sous une tension contrôlée dans l'unité chauffant, passe ensuite dans une broche à fausse torsion ou sur une surface à friction qui est typiquement une pile de disques rotatifs appelés agrégat, puis il passe à travers un jeu de cylindres récepteurs et ensuite sur un support d'enroulement récepteur. La torsion est fixée sur le fil par l'action d'un tube à chauffage, ensuite elle est annulée au-dessus de la broche ou de l'agrégat, ce qui donne un groupe de filaments de forme hélicoïdale. Les fausses torsions de friction permettent d'atteindre des vitesses beaucoup plus élevées de transformation qu'avec les fausses torsions obtenues à l'aide de broches conventionnelles. Les fils à extensibilité élastique ainsi que les fils gonflants peuvent être obtenus par ces procédés. Les exemples de fils texturés par fausse torsion sont : Superloft®, Flufflon® et Hélanca®.Index. décimale : 677.4 Textiles artificiels Résumé : Thermoplastic, melt-spun filament yarns are mostly textured for application in apparel, carpets and technical textiles to give the smooth yarn a bulky and thus natural fiber-like character with the resulting properties. The most widely used texturing process worldwide is false-twist texturing. During this process, the production speed is limited by the forces acting on the yarn. Especially in the case of spun-dyed yarns, the introduced dye particles cause weak points in the yarn where yarn breakage first occurs. To investigate these forces in the yarn, a numerical model is implemented which maps the path of the yarn through the twist unit in the false-twist texturing process. In this model, arbitrary friction disc speeds and geometries can be selected. The validity of the model is checked on a texturing test bench and evaluated on the basis of the yarn tensile forces upstream and downstream of the twist unit. The model shows deviations from measured tensile forces but reproduces the yarn path well. Note de contenu : - Fig. 1 : Modular false-twist texturing test bench at ITA with the respective measuring positions of the yarn tensile force
- Fig. 2 : Friction disc twist unit at ITA with entry guide, working and exit knife discs
- Fig. 4 : imulated yarn path through the twist unit. Black bold line : yarn. Gray thin lines : friction discsEn ligne : https://drive.google.com/file/d/1St7GQb5IdFLOl6-qevWE4JusmSBOMUaR/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37765
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 88-89[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible Use of artificial intelligence at SMEs in the nonwovens industry / Ruben Kins in CHEMICAL FIBERS INTERNATIONAL, Vol. 72, N° 2 (05/2022)
[article]
Titre : Use of artificial intelligence at SMEs in the nonwovens industry Type de document : texte imprimé Auteurs : Ruben Kins, Auteur ; Frederik Cloppenburg, Auteur ; Christian Möbitz, Auteur ; Florian Pohlmeyer, Auteur ; Thomas Gries, Auteur Année de publication : 2022 Article en page(s) : p. 90-91 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Industrie 4.0 Le concept d’Industrie 4.0 correspond à une nouvelle façon d’organiser les moyens de production : l’objectif est la mise en place d’usines dites "intelligentes" ("smart factories") capables d’une plus grande adaptabilité dans la production et d’une allocation plus efficace des ressources, ouvrant ainsi la voie à une nouvelle révolution industrielle. Ses bases technologiques sont l'Internet des objets et les systèmes cyber-physiques.
Intelligence artificielle
NontissésIndex. décimale : 677.6 Tissus obtenus par des procédés spéciaux, quelle que soit leur composition : jacquard, feutres tissés et non tissés, tapisseries, tissus ajourés Résumé : Great progress has been made in the area of Industry 4.0 in recent years. However, for SMEs in particular, including those in the nonwovens industry, it has been challenging to keep up. This article addresses the difficulties faced by SMEs and how these can be overcome in cooperation with research partners. Note de contenu : - Potential of artificial intelligence for SMEs
- Use of artificial intelligence in SMEs
- Introduction of artificial intelligence for SMEs
- Implemented SME lighthouse projects of the ITA
- Fig. 1 : Current state and potential of AIs
- Fig. 2 : Application of snap fasteners
- Fig. 3 : Monitoring of the subjective quality using AI
- Fig. 4 : Model for the prediction of cloudinessEn ligne : https://drive.google.com/file/d/1BCAwirjIABUz8bNyas3lL3eNqLwgN08E/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37766
in CHEMICAL FIBERS INTERNATIONAL > Vol. 72, N° 2 (05/2022) . - p. 90-91[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 23463 - Périodique Bibliothèque principale Documentaires Disponible
Exemplaires (1)
Code-barres | Cote | Support | Localisation | Section | Disponibilité |
---|---|---|---|---|---|
23463 | - | Périodique | Bibliothèque principale | Documentaires | Disponible |