![](./images/home.jpg)
![](./images/bar_spacer.gif)
Catégories
![](./images/expand_all.gif)
![](./images/collapse_all.gif)
Etendre la recherche sur niveau(x) vers le bas
Inkjet printing and surface treatment of an optimized polyurethane-based ink formulation as a suitable insulator over silver for contact with aqueous-based fluids in low-voltage applications / P. Aminayi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 14, N° 3 (05/2017)
![]()
[article]
Titre : Inkjet printing and surface treatment of an optimized polyurethane-based ink formulation as a suitable insulator over silver for contact with aqueous-based fluids in low-voltage applications Type de document : texte imprimé Auteurs : P. Aminayi, Auteur ; B. R. Young, Auteur ; T. L. Young, Auteur ; L. H. Sprowl, Auteur ; M. K. Joyce, Auteur Année de publication : 2017 Article en page(s) : p. 641-649 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Electronique imprimée
Encre -- Additifs
Encre jet d'encre
Formulation (Génie chimique)
Impression jet d'encre
Isolants
Polyéthylène téréphtalate
Polyuréthanes
Traîtements de surfaceIndex. décimale : 667.9 Revêtements et enduits Résumé : An optimized, formulated polyurethane (PU)-based insulating ink, which was inkjet printed and cured as a tri-layer on top of an inkjet-printed and sintered commercial silver ink base metal fused to polyethylene terephthalate substrate, demonstrated a resistivity of >1.2 × 108 Ω cm at a film thickness of 100 μm when exposed to an aqueous saline solution and a voltage differential of <2 V. This insulating property is highly desirable for biofluids-contacting biosensors. Three PU-based insulator ink formulations were made with different levels of ethylene glycol and carboxymethylcellulose additives to improve ink volatility, viscosity, and dispersion properties. Based on the resultant ink properties important to printing, one of these formulations was selected for further evaluation. The effects of the type and extent of surface conditioning involving UV–O3 and/or thermal treatments on print quality and completed insulator functionality are discussed. Print quality is assessed by visual and profilometry measurement. Note de contenu : - PET-base substrate modification to optimize surface energy
- Conductive silver prints
- PU insulator ink formulation and properties
- Printing of the insulator ink layers
- Insulator print resistivity, conditioning, and qualityDOI : 10.1007/s11998-016-9882-5 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-016-9882-5.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=28572
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 14, N° 3 (05/2017) . - p. 641-649[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 18899 - Périodique Bibliothèque principale Documentaires Disponible Innovation dans les fluorosilicones SILTECH et améliorations des propriétés de "coatings" grâce à ces additifs / Robert Ruckle in DOUBLE LIAISON, N° 598 (05/2014)
[article]
Titre : Innovation dans les fluorosilicones SILTECH et améliorations des propriétés de "coatings" grâce à ces additifs Type de document : texte imprimé Auteurs : Robert Ruckle, Auteur ; Tom Seung-Tong Cheung, Auteur ; Joël Valencony, Auteur ; Dave Wilson, Auteur ; Manfred Gloeggler, Auteur Année de publication : 2014 Article en page(s) : p. 18-23 Langues : Français (fre) Catégories : Copolymère époxy acrylate
Copolymère silicone époxy
Copolymère uréthane acrylate
Fluoropolymères
Formulation (Génie chimique)
Polymères cationiques
Polyuréthanes
Résistance aux taches
Revêtement en phase solvant
Revêtements
Revêtements -- Additifs
Revêtements -- Séchage sous rayonnement ultraviolet
Revêtements bi-composant
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 667.9 Revêtements et enduits Résumé : Etude de l'amélioration des propriétés de vos coatings base solvant ou UV par l'ajout d'additifs silicones fluorés ou hybrides, et ce, de façon économiquement raisonnée ! Une solution adaptée à chaque formulation ! Note de contenu : - Plan d'expérience et méthodologie
- Procédures et formulations
- Méthodologie
- Table A : Données techniques de fluorosilicone alkyle
- Table B : Formulation du système I, formulation 2K SB/PU
- Table C : Formulation Système II, formulation UV PU acrylate
- Table D : Formulation d'un système UV - résine époxy acrylate
- Table E : Formulations of System IV - Cationic UV epoxy silicone with various FAS additive
- Table F : Propriétés du film du système I, 2K SB/PU coating avec 1% de fluoroalkyl silicones
- Graphe 1 : Résistance à la tache du système 2K SB/PU avec 1% fluoroalkyl silicone
- Graphe 2 : Propriété du film avec 1% de fluoroalkyl silicone FAS
- Graphe 3 : Résistance à la tache sur un coating : UV PU ACR urethane acrylate avec 1% de fluoroalkyl silicone
- Table G : Propriétés du film de revêtement UV résine époxy acrylate, formulé avec 1% FAS
- Table H : Propriétés de résistance à la tache de revêtement UV de résine époxy acrylate, formulé avec 1% FAS
- Table I : Propriétés du film du système IV - catalyse cationique, résine silicone époxy, process UV avec différents ratio d'additif FASPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21388
in DOUBLE LIAISON > N° 598 (05/2014) . - p. 18-23[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16258 - Périodique Bibliothèque principale Documentaires Disponible Innovative coating systems for steel bridges : a review of developments / Mike O'Donoghue in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 30, N° 1 (01/2013)
[article]
Titre : Innovative coating systems for steel bridges : a review of developments Type de document : texte imprimé Auteurs : Mike O'Donoghue, Auteur ; Vijay Datta, Auteur ; Terry Wiseman, Auteur ; Peter Roberts, Auteur ; Norb Repman, Auteur Année de publication : 2013 Article en page(s) : p. 34-52 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Anticorrosifs
Anticorrosion
Epoxydes
Métaux -- Revêtements protecteurs
Polyaspartiques
Polyuréthanes
Ponts métalliques -- Revêtements protecteurs
Primaire (revêtement)
Revêtements -- Finition
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).
ZincIndex. décimale : 667.9 Revêtements et enduits Résumé : As the worldwide bridge inventory continues to age, the manufacturers of high performance protective coatings have developed three and two coat systems based on zinc primers and polyaspartic, polyurethane or polysiloxane finish coats. The finish coats have more history in three-coat systems than in two-coat systems but are proving their effectiveness in both type of systems.
Accelerated laboratory test procedures currently available allow the industry to provide owners a comparison of bridge systems used in yesteryear with innovative, present-day high-performance systems.
Overcoating is a viable bridge painting option to give long-term corrosion protection. the best overcoat systems are those based on HRCSA technology.Note de contenu : - Coating technology for bridges
- Two-coat bridge systems
- Accelerated laboratory testing
- Overcoating
- Epoxy penetrant sealers and HRCSA sealers
- General discussionPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=17265
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 30, N° 1 (01/2013) . - p. 34-52[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14581 - Périodique Bibliothèque principale Documentaires Disponible Innovative composites made from up to 92% reclaimed materials / Ralf-Stefan Stuhr in JEC COMPOSITES MAGAZINE, N° 136 (09-10/2020)
[article]
Titre : Innovative composites made from up to 92% reclaimed materials Type de document : texte imprimé Auteurs : Ralf-Stefan Stuhr, Auteur ; Reinhard Kessing, Auteur Année de publication : 2020 Article en page(s) : p. 38-39 Langues : Anglais (eng) Catégories : Automobiles -- Matériaux
Composites à fibres de verre
Eoliennes -- Matériaux
Polyuréthanes
Procédés de fabrication
Récupération (Déchets, etc.)Index. décimale : 668.4 Plastiques, vinyles Résumé : "To get straight to the point, Infinici has developed a technology that allows us to produce new composites from EoL glass fibre-reinforced plastics (GRP) and rigid polyurethane (PUR) composite materials. At first, everyone thought we were crazy : Composites cannot be separated again... It is technically not possible... It does not pay off... There is no market for it... The list of objections was endless. Now momentum is on our side". Note de contenu : - Technology consortium
- Into new composites
- The Infinici Technology
- New high-strength composite panels from EoL wind blades and auto parts
- Fig. 1 : Materials sources for the Infinici composites production
- Fig. 2 : Infinici technology for material transformationPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=35458
in JEC COMPOSITES MAGAZINE > N° 136 (09-10/2020) . - p. 38-39[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22571 - Périodique Bibliothèque principale Documentaires Disponible Innovative cross-linking enhances efficiency and effectivity of coating processes in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4646 (11/2018)
![]()
[article]
Titre : Innovative cross-linking enhances efficiency and effectivity of coating processes Type de document : texte imprimé Année de publication : 2018 Article en page(s) : p. 31-32 Langues : Anglais (eng) Catégories : Dispersions et suspensions
Polyuréthanes
Réticulation (polymérisation)
Revêtements en phase aqueuse -- Séchage sous rayonnement ultravioletIndex. décimale : 667.9 Revêtements et enduits Résumé : Multi-curing waterborne polyurethane dispersion speeds up drying, cuts process times by up to half, and improves performance even under poor UV-curing conditions.
The advantages of UV-curing waterborne polyurethane (PU) coatings are well known ; their disadvantages too: insufficient UV curing in shadow areas or for pigmented paints and a lengthy water evaporation phase before UV curing can Begin, for example. Now, a new multi-curing waterborne PU dispersion developed by Covestro has been shown to overcome these problems and deliver significant benefits. This innovative technology received the Alain Clause Award at the 2018 European Technical Coatings Congress in Amsterdam.
This multi-curing technology in combination with the new multi-curing PU dispersion Bayhydrol® UV 2877 has been shown to improve the coating performance, even in such low UV dosage conditions. Even without UV curing, this technology delivers an adequate coating performance, and the properties can be clearly boosted when UV light is applied. While the inherent crosslinking of the polymer compensates for the possible lack of light, the chemical constitution of this new multi-curing technology speeds up the water release phase. This brings clear benefits.
pictogram in the labelling. What's more, the product is partly manufactured from renewable sources. Besides requiring less photoinitiator, this technology also reduces the amount of UV and drying energy needed. Covestro's new multi-curing UV-curing polyurethane dispersion is suitable for a broad range of uses, eaclear and pigmented coatings, exterior applications and parquet on site. So what innovative development made this new crosslinking solution possible ?Note de contenu : - Limitations overcome
- Practical benefits
- Oxidative curing-secondary crosslinking
- Reduced drying time
- Lower costs
- Improved robustness and line speed
- High-quality wood finishes
- FIGURES : Multi-curing possibilities - Clear wood coating performance without UV light - Multi-curing dispersion allows good performance without UV curing - Pigmented wood coating performance - Multi-curing dispersion improved performance in pigmented coatings - Multi-curing UV PUD : applications possibilitiesEn ligne : https://drive.google.com/file/d/1OQLPnQM8kTvJ74S1h-gc4EMaYBKzLkMg/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=31576
in POLYMERS PAINT COLOUR JOURNAL - PPCJ > Vol. 208, N° 4646 (11/2018) . - p. 31-32[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20368 - Périodique Bibliothèque principale Documentaires Disponible Innovative self-initiating UV-curable polyurethane dispersions in COATINGS TECH, Vol. 17, N° 7 (07/2020)
![]()
PermalinkInorganic/organic nanocomposite coatings : The next step in coating performance / Mark D. Soucek in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 3, N° 2 (04/2006)
![]()
PermalinkIntelligent polymeric surfaces through molecular self-assembly / Achin Goel in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 6, N° 1 (03/2009)
![]()
PermalinkInterfacial studies of crosslinked polyurethanes ; Part I. quantitative and structural aspects of crosslinked near film-air and film-substrate interfaces in solvent-borne polyurethanes / Anneke M. Kaminski in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 69, N° 872 (09/1997)
PermalinkInterfacial studies of crosslinked urethanes : Part III. Structure-property relationships in polyester waterborne polyurethanes / M. W. Urban in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 71, N° 888 (01/1999)
PermalinkPermalinkIntroducing isoborbide : A sustainable, safe, high performance, plant-based feedstock for coatings in SURFACE COATINGS INTERNATIONAL, Vol. 104.6 (11-12/2021)
![]()
PermalinkIntroducing isosorbide : A sustainable, safe, high performance, plant-based feedstock for coatings / Jiae Kim in SURFACE COATINGS INTERNATIONAL, Vol. 103.6 (11-12/2020)
![]()
PermalinkIntroduction to farnesene-based polyols / Herbert Chao in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 25, N° 4 (04/2018)
![]()
PermalinkInventive routes for the preparation of waterborne acrylic polyols for 2K PU protective topcoats / David Vanaken in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 212, N° 4676 (08/2022)
![]()
PermalinkInvestigating changes in electrochemical properties when nano-silica is incorporated into an acrylic-based polyurethane clearcoat / Hamed Dastmalchian in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 9, N° 2 (03/2012)
![]()
PermalinkInvestigating the antigraffiti properties of a polyurethane clearcoat containing a silicone polyacrylate additive / Mohammad Rabea in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 8, N° 4 (07/2011)
![]()
PermalinkInvestigating the long-term effects of immersion in salt solutions on the protective properties of bio-content polyurethane coatings / Douglas J. Mills in SURFACE COATINGS INTERNATIONAL, Vol. 103.4 (07-08/2020)
![]()
PermalinkInvestigation of the behavior of organo-metallic compound and its influence on polyurethane / Y.-X. Jiang in INTERNATIONAL POLYMER PROCESSING, Vol. XXXIII, N° 2 (05/2018)
![]()
PermalinkIs the future of plastics "green" ? / Rolf Mülhaupt in KUNSTSTOFFE INTERNATIONAL, Vol. 103, N° 5 (05/2013)
Permalink