Accueil
KUNSTSTOFFE INTERNATIONAL . Vol. 102, N° 9Mention de date : 09/2012Paru le : 05/10/2012 |
Dépouillements
Ajouter le résultat dans votre panierThe four sides of a cube / Thorsten Thümen in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : The four sides of a cube Type de document : texte imprimé Auteurs : Thorsten Thümen, Auteur Année de publication : 2012 Article en page(s) : p. 8-12 Langues : Anglais (eng) Catégories : Matières plastiques -- Moulage par injection
Matières plastiques -- Rotomoulage
Moules d'injectionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Rotating Stack Molds - Even though clever engineers dreamed up rotating stack mold systems 15 years ago, new ideas keep coming. Recent experience shows how versatile this technology is today. At the same time, the original focus on technical multi-material parts is fading more and more into the background. Note de contenu : - From rotating stack molds to cube technologye
- The step to the double cube
- Machines considerations
- Flexible conversionPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16082
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 8-12[article]Réservation
Réserver ce documentSwitch over to consistent quality / Georg Pillwein in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Switch over to consistent quality Type de document : texte imprimé Auteurs : Georg Pillwein, Auteur ; Josef Giessauf, Auteur ; Georg Steinbichler, Auteur Année de publication : 2012 Article en page(s) : p. 13-16 Langues : Anglais (eng) Catégories : Matières plastiques -- Moulage par injection
Polymères
Qualité -- Contrôle
ViscositéIndex. décimale : 668.4 Plastiques, vinyles Résumé : Process Control - Although modern electric injection units can be shown to execute movements with the highest levels of repeatability, in practice consistent molded part quality often remains unachievable. Variations in the quantity of melt and melt viscosity have been found to be the most important factors influencing this. A new process control method picks up these variations during the injection phase and equalizes them within the same shot. Note de contenu : - Precise movements are not guarantee of quality
- Because melt quantity and viscosity vary
- Type of switchover : the agony of choice
- A different way to switchover with automatic compensation
- Better reproducibility even with special processing technologiesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16083
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 13-16[article]Réservation
Réserver ce documentTurbo technology for injection and ejection / Hans-Jürgen Popp in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Turbo technology for injection and ejection Type de document : texte imprimé Auteurs : Hans-Jürgen Popp, Auteur ; Thorsten Köhler, Auteur Année de publication : 2012 Article en page(s) : p. 17-20 Langues : Anglais (eng) Catégories : Matières plastiques -- Moulage par injection -- Appareils et matériel Tags : Plastiques 'Moulage injection' Ejection Valve Index. décimale : 668.4 Plastiques, vinyles Résumé : Valve Technology - Working closely with a valve specialist, an injection molding machine manufacturer has optimized the machine axes of its high-speed series and translated the specifications into a piston geometry. This systematic individualization of the axis and control valves further accelerated the – already high – dynamics for injection and ejection. Note de contenu : - Computer simulation of the control loop
- Greater precision during injection, changeover and holding pressure
- Large process window during ejection
- Active acceleration and higher production efficiency
- Positive resonancePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16084
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 17-20[article]Réservation
Réserver ce document"The level of automation is 85 percent" / Susanne Palm in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : "The level of automation is 85 percent" Type de document : texte imprimé Auteurs : Susanne Palm, Auteur Année de publication : 2012 Article en page(s) : p. 21-24 Langues : Anglais (eng) Catégories : Automatisation
Matières plastiques -- Moulage par injectionIndex. décimale : 668.4 Plastiques, vinyles Résumé : Efficiency Gains - Cost-efficient, high-quality production in many cases means forcing the pace of automated production. In line with the complexity of the production systems, great differences can exist in the requirements profile, as an example of an advanced manufacturing solution demonstrates: A new production cell largely automates workflows that previously four employees completed manually, and replaces two vertical injection molding machines by a horizontal one. Note de contenu : - Five manual steps eliminated
- Multi-component and insert molding in one pass
- Overmolding with a TPV
- Comparison between old and new methods
- Premium quality worldwidePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16085
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 21-24[article]Réservation
Réserver ce documentServing the growth market for staple fibers ecologically PET fibers / Axel Hannemann in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Serving the growth market for staple fibers ecologically PET fibers Type de document : texte imprimé Auteurs : Axel Hannemann, Auteur Année de publication : 2012 Article en page(s) : p. 25-27 Langues : Anglais (eng) Catégories : Coût -- Contrôle
Fibres textiles synthétiques
Matières plastiques -- Extrusion -- Appareils et matériels
Matières plastiques -- Recyclage
Polyéthylène téréphtalateIndex. décimale : 668.4 Plastiques, vinyles Résumé : PET Fibers - Application of the right machine technology allows the two trends towards a growing demand for technical fibers and an increasing use of recycled material to be served simultaneously. By modifying the extrusion line from a single-screw extruder to a MRS extruder, for example, one manufacturer was able to increase throughput by more than one-third, to improve the quality of the fibers and to reduce energy costs. Note de contenu : - Fiber production and applications
- MRS extruder with degassing and viscosity control
- Automatic melt filter
- Online viscometer for recording and control
- Throughput increased and energy savedPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16086
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 25-27[article]Réservation
Réserver ce documentStructural-mechanical behavior of filled PET bottles / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Structural-mechanical behavior of filled PET bottles Type de document : texte imprimé Auteurs : Christian Hopmann, Auteur ; Sebastian Rasche, Auteur ; Thorsten Leopold, Auteur Année de publication : 2012 Article en page(s) : p. 28-32 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Bouteilles en matières plastiques
Matières plastiques -- Moulage par injection-étirage-soufflage
Matières plastiques -- Moulage par injection-soufflageL'injection-soufflage est un procédé de mise en forme de matériaux polymères thermoplastiques ou du verre qui est utilisé pour fabriquer des corps creux, tels des flacons et bouteilles
Modélisation tridimensionnelle
Polyéthylène téréphtalate
Simulation par ordinateurIndex. décimale : 668.4 Plastiques, vinyles Résumé : Investigations into the modeling of the top-load behavior of filled stretch-blow molded bottles show that integrative simulation represents a valuable tool for calculating the structural-mechanical behavior. It is to be expected that the procedure presented here can provide lasting support for the development and optimization process for these packagings in future. Note de contenu : - Three-dimensional integrative process simulation
- Determination of the stretch ratio-dependent properties
- Determination of the mechanical behaviorPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16087
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 28-32[article]Réservation
Réserver ce documentFast and up close to production / Thomas Hochrein in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Fast and up close to production Type de document : texte imprimé Auteurs : Thomas Hochrein, Auteur ; Julia Botos, Auteur ; Karsten Kretschmer, Auteur ; Peter Heidemeyer, Auteur ; Bernhard Ulmer, Auteur ; Thomas Zentgraf, Auteur ; Martin Bastian, Auteur Année de publication : 2012 Article en page(s) : p. 33-37 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Colorimétrie
Granulats
Matières plastiques
Matières plastiques -- Moulage par injection
ThermochromieIndex. décimale : 668.4 Plastiques, vinyles Résumé : Colorimetry - Engineering solutions have been developed in recent years, which enable the user to measure the qualities of colors long time before the component is finally completed. Several options have thus been made available of color qualification during the production process. This way, the manufacturing chain can be monitored, from compounding, via pelletizing, up to injection molding and extrusion. Note de contenu : - Determination of color
- Color measurement - Conventionally or during production ?
- Thermochromism
- Color measurement on the melt
- Atline measurements on granules
- Color measuring on the strand
- Color measurement during the injection molding processPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16208
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 33-37[article]Réservation
Réserver ce documentCritical strain as a parameter in failure determination / Otto Skrabala in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Critical strain as a parameter in failure determination Type de document : texte imprimé Auteurs : Otto Skrabala, Auteur ; Christian Bonten, Auteur Année de publication : 2012 Article en page(s) : p. 38-41 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Contraintes (mécanique)
Déformations (mécanique)
Endommagement (mécanique)
Essais de résilience
Matières plastiques
Mesure
Rupture (mécanique)Index. décimale : 668.4 Plastiques, vinyles Résumé : Measurement Technology - Plastics parts design is usually stress-based. Yet Menges and his colleagues long ago discovered that it is more accurate to use strain as a criterion. However, it is quite complicated to determine so-called “critical strain” as a limit value. Recent studies done at the IKT in Stuttgart, Germany, aim at making this determination more accurate and simpler. Note de contenu : - A plastics compatible approach
- Hurdles to application
- The new rapid measurement system
- First testsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16209
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 38-41[article]Réservation
Réserver ce document
[article]
Titre : A sticky question Type de document : texte imprimé Auteurs : Florian Müller, Auteur ; Stefan Mochev, Auteur Année de publication : 2012 Article en page(s) : p. 42-45 Langues : Anglais (eng) Catégories : Coût -- Contrôle
Matières plastiques -- Collage
Polyacryliques
Rubans adhésifsIndex. décimale : 668.4 Plastiques, vinyles Résumé : Adhesive Tapes - Junction boxes for photovoltaic systems are produced from flame-retardant polyamide among other materials. Until now, these junction boxes have been bonded to the crystalline or thin-film solar modules with silicone adhesives. However, this gives rise to high production costs due to the lengthy curing process. Extensive trials have shown that time and money can be saved by using acrylic adhesive tapes as an alternative. En ligne : http://www.plasticsportal.net/wa/plasticsEU~bg_BG/function/conversions:/publish/ [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16210
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 42-45[article]Réservation
Réserver ce documentPolypropylene improves acoustics in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Polypropylene improves acoustics Type de document : texte imprimé Année de publication : 2012 Article en page(s) : p. 46 Langues : Anglais (eng) Catégories : Automobiles -- Moteurs -- Pièces
Matières plastiques dans les automobiles
Polymères -- Propriétés acoustiques
PolypropylèneIndex. décimale : 668.4 Plastiques, vinyles Résumé : PP Intake Manifold - With intake manifolds made of polypropylene (PP), new benchmarks in terms of cost, weight and acoustics have been set. First investigations have shown that PP meets the requirements while offering significant benefits, as compared to the polyamide used so far. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16211
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 46[article]Réservation
Réserver ce documentUltralight electric vehicle / Jens Werner in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Ultralight electric vehicle Type de document : texte imprimé Auteurs : Jens Werner, Auteur ; Jörn Kiele, Auteur ; Alexander Herbig, Auteur ; Alexandra Klotz, Auteur ; Moritz Bahlsen, Auteur Année de publication : 2012 Article en page(s) : p. 47-50 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Automobiles électriques -- Conception et construction
Composites à fibres de carbone
Matériaux -- Allègement
Matières plastiques dans les automobilesIndex. décimale : 668.4 Plastiques, vinyles Résumé : Steel/CFRP Hybrid Composites - Scientists at the Technical University of Dresden are currently testing an unusual material mix of steel and carbon fiber-reinforced plastic (CFRP) for the research prototype of the InEco electric automobile. The electrically powered compact vehicle will weigh less than 900 kg, including batteries. Note de contenu : - Lightweight construction in multi-material design
- Innovation through integration
- Floor group of textil-reinforced thermoplastics
- Crash-compatible front end structurePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16212
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 47-50[article]Réservation
Réserver ce documentIntegrative simulation of hybrid composite parts / Marcel Brandt in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Integrative simulation of hybrid composite parts Type de document : texte imprimé Auteurs : Marcel Brandt, Auteur ; Frank Lutter, Auteur Année de publication : 2012 Article en page(s) : p. 51-54 Langues : Anglais (eng) Catégories : Automobiles -- Pièces
Composites à fibres
Déformations (mécanique)
Matériaux -- Allègement
Matières plastiques dans les automobiles
PolyamidesUn polyamide est un polymère contenant des fonctions amides -C(=O)-NH- résultant d'une réaction de polycondensation entre les fonctions acide carboxylique et amine.
Selon la composition de leur chaîne squelettique, les polyamides sont classés en aliphatiques, semi-aromatiques et aromatiques. Selon le type d'unités répétitives, les polyamides peuvent être des homopolymères ou des copolymères.
Simulation par ordinateurIndex. décimale : 668.4 Plastiques, vinyles Résumé : Lightweight Design - Thanks to a new material model for composite sheet and precise simulation of how it deforms, the actual performance of hybrid parts made from fiber-reinforced polyamide can be calculated very accurately through use of integrative simulation. This know-how is part of the comprehensive service with which Lanxess supports project partners during the entire development phase of such structural composite parts. Note de contenu : - Model for anisotropic material behavior
- Virtual design according to the loads applied
- Precise simulation or forming
- Outstanding validation
- Service during the entire development processPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16213
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 51-54[article]Réservation
Réserver ce documentSemi-finished fabrics to order / Gerd Rauenbusch in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Semi-finished fabrics to order Type de document : texte imprimé Auteurs : Gerd Rauenbusch, Auteur Année de publication : 2012 Article en page(s) : p. 55-56 Langues : Anglais (eng) Catégories : Composites à fibres
Coupe
Coût de production
Renforts textiles -- DéchetsIndex. décimale : 668.4 Plastiques, vinyles Résumé : Reinforcement Fabrics - Fiber composite parts and fiber-reinforced molds have been traditionally manufactured by cutting them from wide semi-finished material. Due to part geometry, large amounts of waste cut are often the result. Such waste necessitates high costs for handling and excessive expense for materials. Note de contenu : - Rount spiral ribbon : an example of 2-D preforms
- High drapability for difficult geometriesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16214
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 55-56[article]Réservation
Réserver ce documentPlastics instead of metals / Joachim Berneck in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Plastics instead of metals Type de document : texte imprimé Auteurs : Joachim Berneck, Auteur Année de publication : 2012 Article en page(s) : p. 57-59 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Fluage
Matières plastiques -- Propriétés mécaniques
Matières plastiques dans les automobiles
PolyamidesUn polyamide est un polymère contenant des fonctions amides -C(=O)-NH- résultant d'une réaction de polycondensation entre les fonctions acide carboxylique et amine.
Selon la composition de leur chaîne squelettique, les polyamides sont classés en aliphatiques, semi-aromatiques et aromatiques. Selon le type d'unités répétitives, les polyamides peuvent être des homopolymères ou des copolymères.
Polymères hautes performances
Traction (mécanique)Index. décimale : 668.4 Plastiques, vinyles Résumé : High Performance Polyamides - In comparison to metals high performance polyamides score well on weight, design, functional integration and more cost effective processing techniques. These advantages are particularly demanded for applications within the automobile industry. Note de contenu : - Ecology and sustainability
- Design and engineering
- Manufacturing process and dimensioning
- Cost optimization and functional integrationPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16215
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 57-59[article]Réservation
Réserver ce documentLighter and cleaner cars / Klaus Schürmann in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Lighter and cleaner cars Type de document : texte imprimé Auteurs : Klaus Schürmann, Auteur ; Söhnke Müller, Auteur ; Bernd Sparenberg, Auteur Année de publication : 2012 Article en page(s) : p. 60-62 Note générale : bibliogr. Langues : Anglais (eng) Catégories : Matériaux -- Allègement
Matières plastiques dans les automobiles
PolypropylèneIndex. décimale : 668.4 Plastiques, vinyles Résumé : The automotive industry is increasingly searching for more lightweight materials. This is because the European Union is tightening up the limits on CO2 emissions from passenger cars coming onto the market in the next few years. A newly developed polypropylene compound offers the required potential for lightweight construction and closes the gap between polypropylene and polyamide. Note de contenu : - Vehicle development and ecology
- Reduced weight required
- "Drop-in" solution for polyamide
- Material for all situationsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16216
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 60-62[article]Réservation
Réserver ce documentCustomized development / Patrick Zimmermann in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Customized development Type de document : texte imprimé Auteurs : Patrick Zimmermann, Auteur ; Christoph Lohr, Auteur Année de publication : 2012 Article en page(s) : p. 63-65 Langues : Anglais (eng) Catégories : Bioplastiques Index. décimale : 668.4 Plastiques, vinyles Résumé : The targeted enhancement of plastics made from renewable resources has now made these materials suitable for a growing number of applications. By the specific use of customized additives, bioplastics have been tailored to the particular production process as well as to the application. Note de contenu : - Customized properties
- Renewable alternativesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16217
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 63-65[article]Réservation
Réserver ce documentHumidity regulation / Sven Sängerlaub in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 9 (09/2012)
[article]
Titre : Humidity regulation Type de document : texte imprimé Auteurs : Sven Sängerlaub, Auteur ; Cornelia Stramm, Auteur Année de publication : 2012 Article en page(s) : p. 66-68 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Aliments -- Emballages -- Aspect sanitaire
Chlorure de calcium
Chlorure de sodiumLe chlorure de sodium est un composé chimique de formule NaCl. On l'appelle plus communément sel de table ou de cuisine, ou tout simplement sel dans le langage courant. C'est le principal produit dissous dans l'eau de mer ; on l'appelle alors sel marin.
On l'obtient : dans des marais salants par évaporation de l'eau de mer, dans des mines, par extraction du sel gemme (halite) ou en le synthétisant lors de réactions à hautes températures entre du dichlore (Cl2) et du sodium métallique (Na).
Le chlorure de sodium est utilisé dans l'industrie chimique pour produire du chlore, de la soude caustique et de l’hydrogène.
Films plastiques
Humidité -- Absorption
Matières plastiques -- AdditifsIndex. décimale : 668.4 Plastiques, vinyles Résumé : Salt Containing Films - Novel humidity regulating polymer composite films contain salts such as calcium chloride and sodium chloride as active substances. These reversibly absorb water vapor. Due to that property they can stabilize the relative humidity in their environment. In packaging related applications undesired effects of humidity can be avoided thereby. Note de contenu : - Properties of salts
- Generation of porous polymer structures
- Stretching ration and porosity of films
- Influence of the water vapor transmission ratePermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16218
in KUNSTSTOFFE INTERNATIONAL > Vol. 102, N° 9 (09/2012) . - p. 66-68[article]Réservation
Réserver ce document