Accueil
Résultat de la recherche
3 résultat(s) recherche sur le tag ''réponse'
Ajouter le résultat dans votre panier Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche
Determination of thermal response on mold surface and recommendation of feasible heating time and gas flow rate for a circular cavity by gas preheating / S.-W. Chang in INTERNATIONAL POLYMER PROCESSING, Vol. XXVII, N° 1 (03/2012)
[article]
Titre : Determination of thermal response on mold surface and recommendation of feasible heating time and gas flow rate for a circular cavity by gas preheating Type de document : texte imprimé Auteurs : S.-W. Chang, Auteur ; Y. H. Lee, Auteur Année de publication : 2012 Article en page(s) : p. 30-39 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Moules d'injection Tags : 'Surface moule' 'Temps chauffage' 'Préchauffage haute température gaz' 'Réponse thermique' 'Modèle mathématique' 'Transfert masse' bi-fluide' 'Analyse dimensionnelle' Index. décimale : 668.9 Polymères Résumé : This paper studies the thermal response on the mold surface of a circular cavity in the preheating process by high-temperature gas via a numerical approach, where the heat and mass transfer inside the cavity and mold are predicted by a two-fluid model. The dimensionless parameter group is identified from a dimensional analysis of the gas preheating problem. The correlations among dimensionless parameters are established by a least square method applied to the numerical predictions. The upper limit of the temperature rise on the cavity surface at a given gas flow rate is found approximately proportional to the square root of Q* and h*, respectively. The lower limit of gas flow rate to achieve a given temperature rise on the cavity surface is inversely proportional to h* but grows with (Q*)1.5. The first limiting line to describe the dependence of Q* on t* is independent of h* and T*, but the second one is governed by Q*c. For reaching a specified temperature rise on the cavity surface, the growth in the thickness of thermal resistive layer reduces the required preheating time but increases the corresponding gas flow rate. The dependence of (t∗ƒ, Q∗ƒ) on the parameter group (T*, h*) is given in this study to obtain the reasonable combinations of (t*ƒ , Q*ƒ) based on the balance between the allowable preheating time and heating capacity. Note de contenu : - MATHEMATICAL MODEL : Governing equations - Boundary conditions - Numerical scheme
- DESCRIPTION OF STUDIED CASEDOI : 10.3139/217.2500 En ligne : https://drive.google.com/file/d/1Ek2BafMIA1ak7SI7Jm5gXPBhWvYVbtNc/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=13719
in INTERNATIONAL POLYMER PROCESSING > Vol. XXVII, N° 1 (03/2012) . - p. 30-39[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 13722 - Périodique Bibliothèque principale Documentaires Disponible Effets des déformations élastiques des revêtements de surface sur le comportement dynamique et la stabilité des paliers hydrodynamiques / M. Lahmar in MATERIAUX & TECHNIQUES, N° 11-12 (11-12/2002)
[article]
Titre : Effets des déformations élastiques des revêtements de surface sur le comportement dynamique et la stabilité des paliers hydrodynamiques Type de document : texte imprimé Auteurs : M. Lahmar, Auteur ; A. Belbah, Auteur ; D. Nicolas, Auteur Année de publication : 2003 Article en page(s) : p. 17-30 Note générale : Bibliogr. Langues : Français (fre) Catégories : Elasticité
Hydrodynamique
Revêtement de surface
Tribologie (technologie)Tags : 'Lubrification élastohydrodynamique' 'Paliers hydrodynamiques' 'Revêtements monocouches' 'Masse critique' 'Réponse dynamique' Index. décimale : 667.9 Revêtements et enduits Résumé : Le travail proposé dans cet article s'intéresse à l'étude de l'influence de la déformabilité des revêtements de surface sur les caractéristiques dynamiques et la stabilité d'un palier lisse. Les revêtements considérés sont supposés monocouches et constitués par des matériaux compressibles tels que les métaux blancs. En lubrification hydrodynamique, la prise en considération des déformations élastiques nécessite le calcul des champs de pression dans le film lubrifiant et de déformations à l'interface fluide-solide. La répartition de la pression dans le film est déterminée par la résolution numérique de l'équation de Reynolds avec prise en considération de la variation de la viscosité du fluide lubrifiant avec la pression. L'hypothèse de couche élastique mince permet d'utiliser le modèle couche mince pour le calcul des déformations à l'interface fluide-solide. Le couplage fluide-solide en régime de lubrification élastohydrodynamique (EHD) est assuré à l'aide d'un processus itératif. La théorie linéaire est utilisée pour l'étude du comportement dynamique ainsi que la stabilité du système rotor-paliers. L'analyse a montré que la déformabilité des revêtements a une influence non négligeable sur le comportement dynamique et la stabilité des paliers lisses; notamment les revêtements de surface constitués de matériaux à faible module d'élasticité. Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=10223
in MATERIAUX & TECHNIQUES > N° 11-12 (11-12/2002) . - p. 17-30[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 000990 - Périodique Bibliothèque principale Documentaires Disponible 000991 - Périodique Bibliothèque principale Documentaires Disponible Optimization of parameters for the preparation of Au/TiO2 with photodegradation of NPE-10 in aqueous solution / C.-B. Feng in TENSIDE, SURFACTANTS, DETERGENTS, Vol. 48, N° 3/2011 (05/2011)
[article]
Titre : Optimization of parameters for the preparation of Au/TiO2 with photodegradation of NPE-10 in aqueous solution Type de document : texte imprimé Auteurs : C.-B. Feng, Auteur ; L. Chen, Auteur ; Z.-P. Du, Auteur Année de publication : 2011 Article en page(s) : p. 200-204 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Surfactants Tags : Au/TiO2 'Déposition-précipitation urée' (DP-urée) 'Méthode Taguchi' 'Réponse lumière visible' Nanoparticule NPE-10 Photodégradation Index. décimale : 668.1 Agents tensioactifs : savons, détergents Résumé : The degradation in aqueous solution of nonionic surfactant, nonylphenyl poly(oxyethylene)ethers (NPE-10), which was photocatalyzed by Au/TiO2nanoparticles has been studied. The particles were obtained using modified deposition-precipitation with Urea (DP Urea). The Taguchi method was implemented successfully to optimize the photoactivity for Au/TiO2photocatalyst. The optimized catalyst was characterized by XRD, BET, TEM, XPS and UV-visible absorption spectra techniques. It was found that Au3+/Ti4+molar ratio was the main parameter having significant effect on photocatalytic activity. Under optimal conditions, the observed Au nano-particle size and distributions indicate, that smaller gold nanoparticles (*1.8 nm diameter) were obtained, and the existing of Au particles promote the photoadsorption of oxygen on the surface of photocatalysts. Both are responsible for the significantly enhanced catalytic activity of commercial TiO2(pure P-25) toward the photodegradation of NPE-10-probably by increasing the rate of production of separated electrons and holes. Note de contenu : - EXPERIMENTAL : Preparation of photocatalysts and measurement of photocatalytic activity - Orthogonal array and characterization of photocatalyst.
- RESULTS AND DISCUSSION : Taguchi design and analysis of variance - Prediction and confirmation of properties - Characterization of Au/TiO2 (Structural analysis of the catalyst - Optical absorption properties ofphotocatalyst).Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11700
in TENSIDE, SURFACTANTS, DETERGENTS > Vol. 48, N° 3/2011 (05/2011) . - p. 200-204[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012974 - Périodique Bibliothèque principale Documentaires Disponible