Accueil
Détail de l'indexation
Ouvrages de la bibliothèque en indexation 667.9
Ajouter le résultat dans votre panier Affiner la recherche
Absorption of ambient moisture in organic solvents / Gayatri B. Sane in PAINTINDIA, Vol. LVII, N° 10 (10/2007)
[article]
Titre : Absorption of ambient moisture in organic solvents Type de document : texte imprimé Auteurs : Gayatri B. Sane, Auteur ; Uday R. Gosavi, Auteur Année de publication : 2007 Article en page(s) : p. 115-120 Langues : Anglais (eng) Index. décimale : 667.9 Revêtements et enduits Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11510
in PAINTINDIA > Vol. LVII, N° 10 (10/2007) . - p. 115-120[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 010023 - Périodique Bibliothèque principale Documentaires Disponible Accelerated corrosion protection tests in INTERNATIONAL SURFACE TECHNOLOGY (IST), N° 2/2010 (2010)
[article]
Titre : Accelerated corrosion protection tests : Laboratory testing devices Type de document : texte imprimé Année de publication : 2010 Article en page(s) : p. 54-55 Langues : Anglais (eng) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Anticorrosion
Essais accélérés (technologie) -- Appareils et matériels
Etudes comparatives
Métaux -- Revêtements protecteursIndex. décimale : 667.9 Revêtements et enduits Résumé : Comparative laboratory tests allow the corrosion protection life of coatings to be measured in a short period of time. In order to ensure that the conditions of the accelerated tests are reproducible, reliable testing equipment with a consistent level of performance is needed. Note de contenu : - Comparing new and existing systems
- Flexible testing equipmentPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=22765
in INTERNATIONAL SURFACE TECHNOLOGY (IST) > N° 2/2010 (2010) . - p. 54-55[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 012648 - Périodique Bibliothèque principale Documentaires Disponible 012689 - Périodique Bibliothèque principale Documentaires Disponible Accelerated corrosion testing for bisphenol-A non-intent metal packaging resin / Goliath Beniah in COATINGS TECH, Vol. 17, N° 8 (08/2020)
[article]
Titre : Accelerated corrosion testing for bisphenol-A non-intent metal packaging resin Type de document : texte imprimé Auteurs : Goliath Beniah, Auteur ; Linqian Feng, Auteur ; Jeffrey Clauson, Auteur ; Abraham Boateng, Auteur ; Hongkun He, Auteur ; Cameron L. Brown, Auteur ; Andrew T. Detwiler, Auteur Année de publication : 2020 Article en page(s) : p. 32-40 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Acétique, Acide L'acide acétique (du latin acetum) ou acide éthanoïque est un acide carboxylique de formule chimique : C2H4O2 ou CH3COOH.
L'acide acétique pur est aussi connu sous le nom d'acide acétique glacial. C'est un des plus simples des acides carboxyliques. Son acidité vient de sa capacité à perdre le proton de sa fonction carboxylique, le transformant ainsi en ion acétate CH3COO-. C'est un acide faible.
L'acide acétique pur est un liquide très faiblement conducteur, incolore, inflammable et hygroscopique. Il est naturellement présent dans le vinaigre, il lui donne son goût acide et son odeur piquante (détectable à partir de 1 ppm21).
C'est un antiseptique et un désinfectant.
L'acide acétique est corrosif et ses vapeurs sont irritantes pour le nez et les yeux.
Il doit être manipulé avec soin. Quoi qu'il n'ait pas été jugé cancérigène ou dangereux pour l'environnement, il peut causer des brûlures ainsi que des dommages permanents à la bouche, au nez, à la gorge et aux poumons. À certaines doses et en co-exposition chronique avec un produit cancérigène, son caractère irritant en fait un promoteur tumoral de tumeurs (bénignes et malignes)21. Ceci a été démontré expérimentalement chez le rat.
Aliments -- Emballages
Anticorrosifs
Anticorrosion
Bisphénol A
Electrochimie
Emballages métalliques
Essais accélérés (technologie)
Essais d'adhésion
Formulation (Génie chimique)
Métaux -- Revêtements
PolyuréthanesIndex. décimale : 667.9 Revêtements et enduits Résumé : Increasing awareness of environmental, health, and food safety issues, as well as increasing regulations on substances with potential health effects, are major driving forces for consumer behavioral changes. These behavioral changes propel the shift toward development of alternative products free from substances of concern. One such substance is Bisphenol-A (BPA), a chemical commonly found in the protective linings of food or beverage metal cans. BPA has undoubtedly become a major cause of concern, prompting serious examinations from various regulatory bodies across the world connecting BPA to adverse health effects.
Since 2015, France has issued a ban on BPA in all packaging, containers, and utensils intended to come into contact with food.1 As recently as 2018, the European Union published a regulation that further restricts the presence or use of BPA-containing substances in plastic food contact materials. The new regulation reduces the specific migration limit for BPA in varnishes and coatings for food contact applications by an order of magnitude (from 0.6 mg/kg to 0.05 mg/kg) over previous regulations.2,3 Although the U.S. Food and Drug Administration has not issued a complete ban on the use of BPA in food can lining applications, several states such as Maryland, Connecticut, and California have placed further restrictions on its presence in food cans. Given the increasing regulatory pressure, the demand for Bisphenol-A Non-Intent (BPA-NI) metal packaging coatings will continue to increase in years to come.Note de contenu : - Table 1 : Details of white PU formulation
- Table 2 : Details of gold phenolic PU formulation
- Fig. 1 : The progress of corrosion in organic coatings, relevant electrochemical circuits, and expected Bode plots at various stages of corrosion
- Fig. 2 : Frequency-dependent impedances of white PU coatings on flat panels made with a) Commercial Control coating and b) EMN-MP coating at zero hours and after 48h of exposure. The panels were first retorted with 3% acetic acid and then aged with 3% acetic acid solution
- Fig. 3 : Nyquist plots of Commercial Control and EMN-MP white PU coatings at zero hours and after 48h of exposure
- Fig. 4 : a) Magnitude of impedance at 0.1 Hz over time for white PU coatings exposed to 3% acetic acid, and b) comparison of corrosion resistance of Commercial Control coating and EMN-MP coating at the end of 48h of ewposure to 3% acetic acid
- Fig. 5 : Frequency-dependent magnitude of impedance of gold phenolic PU coatings on flat panels made with Commercial Control and EMN-MP resins after aging with 2% lactic acid solution for 36 days
- Fig. 6 : Nyquist plots of gold phenolic PU coatings on flat panels made with () EMN-MP and (b) Commercial Control resins after aging with 2% lactic acid solution for 36 days
- Fig. 8 : Progress of corrosion as examined by enamel rater for can lids coated with white PU coatings exposed to 5% acetic at 50°C over seven days of exposure
- Fig. 9 : Can lids after exposure to 5% acetic acid at 50°C for seven days and after tape adhesion testEn ligne : https://www.paint.org/wp-content/uploads/2021/09/Bisphenol-A-Non-Intent-Metal-Pa [...] Format de la ressource électronique : Html Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34448
in COATINGS TECH > Vol. 17, N° 8 (08/2020) . - p. 32-40[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21923 - Périodique Bibliothèque principale Documentaires Disponible Accelerated drying of water-dispersible polyurethane blends / Joseph P. Labukas in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 2 (03/2014)
[article]
Titre : Accelerated drying of water-dispersible polyurethane blends Type de document : texte imprimé Auteurs : Joseph P. Labukas, Auteur ; John A. Escarsega, Auteur ; Dawn M. Crawford, Auteur Année de publication : 2014 Article en page(s) : p. 217-229 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Alliages polymères
Analyse mécanique dynamique
Camouflage (science militaire)
Photoamorceurs (chimie)
Polyaddition
Polyisocyanates
Polymères -- Propriétés thermomécaniques
Polyols
Polyuréthanes
Résistance chimique
Revêtements en phase aqueuse -- Séchage sous rayonnement ultraviolet:Peinture en phase aqueuse -- Séchage sous rayonnement ultraviolet
Revêtements en phase aqueuse:Peinture en phase aqueuseIndex. décimale : 667.9 Revêtements et enduits Résumé : Mixtures of water-dispersible isocyanate and polyol-terminated oligomers were blended with methacrylate-terminated urethanes and a water-dispersible photoinitiator to accelerate the dry time of thin polymer films. Thermomechanical properties of the polyurethane blends were measured using dynamic mechanical analysis. Kinetics of the ultraviolet-initiated radical polymerization reaction and the polyol/isocyanate addition reaction were monitored using attenuated total reflectance-Fourier transform infrared spectroscopy. Note de contenu : - EXPERIMENTAL : Chemicals - Film formation - Dynamic mechanical analysis - Attenuated total reflectance-Fourier Transform infrared spectroscopy
- RESULTS AND DISCUSSION : UV-activated film formation - Crosslinking and film development - Exposure of CARC to UV - Crosslinked polyurethane films - Functional group evolution during curingDOI : 10.1007/s11998-013-9536-9 En ligne : https://link.springer.com/content/pdf/10.1007%2Fs11998-013-9536-9.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21166
in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH > Vol. 11, N° 2 (03/2014) . - p. 217-229[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 16196 - Périodique Bibliothèque principale Documentaires Disponible Accelerated exposure of pigmented anti-corrosion coating systems / X. F. Yang in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS, Vol. 87, B1 (02/2004)
[article]
Titre : Accelerated exposure of pigmented anti-corrosion coating systems Type de document : texte imprimé Auteurs : X. F. Yang, Auteur ; Stuart G. Croll, Auteur Année de publication : 2004 Article en page(s) : p. 7-13 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Butanone La butan-2-one (appelée simplement butanone, éthyl méthyl cétone ou MEK en anglais) est une cétone généralement utilisée en tant que solvant. Il s'agit d'un liquide incolore qui possède une odeur piquante ressemblant à celle de l'acétone.
Essais accélérés (technologie)
Liants
Microscopie à force atomique
Polyuréthanes
Revêtements organiques
Spectroscopie d'impédance électrochimiqueIndex. décimale : 667.9 Revêtements et enduits Résumé : Two coating systems were investigated under QUV-340®/Prohesion (ultraviolet/salt fog) alternating exposure. One coating was a conventional primer high-gloss (HG) polyurethane topcoat, and the other was a single ‘self-priming’ (SP) polyurethane coating. Both coating surfaces oxidised from the exposure, but the coating bulk remained intact. Cracks developed in the ‘self-priming’ coating surface, but it remained adhering. The other topcoat showed good weathering resistance, but its primer lost adhesion after exposure. Both coatings initially developed nanoblisters, then increasing surface roughness. Electrochemical impedance spectroscopy (EIS) showed similar corrosion-protective properties during much of the exposure. Evidently, electrochemical measurements alone are not sufficient to monitor deterioration in corrosion-protective coatings. Note de contenu : - Sample preparations
- Accelerated weathering tests
- Coatings tests
- Atomic Force Microscopy (AFM) studies
- Scanning Electron Microscopy (SEM) and energy dispersive x-ray analysis (EDX)
- Electrochemistry impedance spectroscopy (EIS) studiesDOI : 10.1007/BF02699558 En ligne : https://link.springer.com/content/pdf/10.1007/BF02699558.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=5476
in SURFACE COATINGS INTERNATIONAL. PART B : COATINGS TRANSACTIONS > Vol. 87, B1 (02/2004) . - p. 7-13[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 000392 - Périodique Bibliothèque principale Documentaires Disponible Accelerated photostability testing / Oliver Rahäuser in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4552 (09/2010)
PermalinkAccelerated production without powder carry-over in INTERNATIONAL SURFACE TECHNOLOGY (IST), Vol. 14, N° 1 (2021)
PermalinkAccelerated testing / Ulrich Schulz / Hannover [Germany] : Vincentz Network GmbH & Co. (2009)
PermalinkAccelerated tests for anticorrosive coatings / Sunil Kale in PAINTINDIA, Vol. LI, N° 8 (08/2001)
PermalinkAccelerated UV drying systems / G. Webster in SURFACE COATINGS INTERNATIONAL, Vol. 79, N° 5 (05/1996)
PermalinkAccelerated UV weathering of polymeric systems : recent innovations and new perspectives / Joannie W. Chin in COATINGS TECH, Vol. 3, N° 2 (02/2006)
PermalinkAccelerated weathering and chemical resistance of polyurethane powder coatings / S. Rossi in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 13, N° 3 (05/2016)
PermalinkAccelerated weathering of oligomers by UV-B / Inwhan Oh in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 210, N° 4666 (12/2020)
PermalinkPermalinkAccelerated weathering of photovoltaic modules / Andreas Riedl in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4588 (09/2013)
PermalinkAccelerated weathering of wood coatings - Development of a new test cycle / Marinus Hoeflaak in EUROPEAN COATINGS JOURNAL (ECJ), N° 1-2/96 (01-02/1996)
PermalinkAccelerated weathering of wood surfaces coated with multifunctional alkoxysilanes by sol-gel deposition / Mandla A. Tshabalala in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 75, N° 943 (08/2003)
PermalinkAccelerated weathering testing in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 200, N° 4544 (01/2010)
Permalink"Accelerated weathering". The need of OEMs / Deepak Shanbhag in PAINTINDIA, Vol. LXII, N° 1 (01/2012)
PermalinkAccelerating coatings development with high throughput technology in COATINGS TECH, Vol. 14, N° 8 (08/2017)
Permalink