Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Polyaspartic : a revolutionary coating technology / Brijesh Mishra in PAINTINDIA, Vol. LXI, N° 6 (06/2011)
[article]
Titre : Polyaspartic : a revolutionary coating technology Type de document : texte imprimé Auteurs : Brijesh Mishra, Auteur Année de publication : 2011 Article en page(s) : p. 57-64 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Diisocyanate de diphénylméthane
Durée de vie en pot
Epoxydes
Isocyanates
Polyaspartiques
Polyurée
Polyuréthanes
RevêtementsIndex. décimale : 667.9 Revêtements et enduits Résumé : The name polyaspartic is becoming more recognyzable among formulators, specifiers, and applicators in the coatings industry to differentiate it from polyurea and polyurethanes. Polyaspartic coating is a recent development in the polyurethane coatings industry. Two main application areas are reaction injection moulding (RIM) and sprayable coatings.
Polyaspartic coatings combine extreme application properties such as rapid cure (even at temperatures well below 0°C) and intensitivity to humidity to exceptional physical properties such as high hardness, flexibility, tear and tensile strength, and chemical and water resistance. The result is good weathering and abrasion resistance. The systems are 100 % solids, making them compliant with strictest VOC regulations. Due to its specific curing profile and exceptional film properties, the polyaspartic coating technique developed into various areas, including corrosion protection, containment, membranes, linings and caulks, polyaspartic coatings increase the productivity and reduc the overall cost.Note de contenu : - History of polyaspartics coatings chemistry
- Chemical reactions
- Curing characteristics
- Polymer film properties
- Properties of polyaspartic coatings
- Low VOC level
- Application properties
- Application techniques
- What makes polyaspartic unique ?
- Applications : Rail cars - Bridges - Concrete - Tunnels - Light poles - Wood floorsPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=11849
in PAINTINDIA > Vol. LXI, N° 6 (06/2011) . - p. 57-64[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 013222 - Périodique Bibliothèque principale Documentaires Disponible Polythioether advances provide new formulating / Christian Probst in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 1 (01/2020)
[article]
Titre : Polythioether advances provide new formulating Type de document : texte imprimé Auteurs : Christian Probst, Auteur Année de publication : 2020 Article en page(s) : p. 12-15 Langues : Américain (ame) Catégories : Allongement à la rupture
Colles:Adhésifs
Durée de vie en pot
Epoxydes
Mastics
Polyacryliques
Polymères -- Propriétés mécaniques
Polythioéther
Résistance à la traction
Résistance au rayonnement ultraviolet
Résistance chimique
Revêtements organiquesIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : colorless, toughening, and chemically resistive polythioether has been developed for the formulation of adhesives, sealants, and coatings. Note de contenu : - Reactivity
- Flexibility
- Chemical resistivity
- UV stability
- Applications
- Epoxy-terminated
- Fig. 1 : Chemical structure of the new polythioether
- Fig. 2 : Adjustment of pot life by variation of catalyst structure and amount
- Fig. 3 : Elongation at break and tensile strength of the polythioether compared to commercial toughening polyetheramines
- Fig. 4 : Schematic representation of the experimental setup. Test specimens before and after 21 days of exposure to different solvents
- Fig. 5 : Schematic representation of the experimental setum. Test specimen before and after 14 adys of exposure to UV lightEn ligne : https://www.adhesivesmag.com/articles/97449-polythioether-advances-provide-new-f [...] Format de la ressource électronique : Html Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33384
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 27, N° 1 (01/2020) . - p. 12-15[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21463 - Périodique Bibliothèque principale Documentaires Disponible Putting the flexible into polyurethanes / Philippe Olier in EUROPEAN COATINGS JOURNAL (ECJ), N° 2 (02/2020)
[article]
Titre : Putting the flexible into polyurethanes : BPI : one of a kind in the polyurethane toolbox Type de document : texte imprimé Auteurs : Philippe Olier, Auteur ; Maykin Aungsukiatethavorn, Auteur Année de publication : 2020 Article en page(s) : p. 26-31 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Diluants
Durée de vie en pot
Formulation (Génie chimique)
Isocyanates
Plastifiants
Polymères -- Propriétés thermiques
Polymères bi-fonctionnels
Polymères en émulsion
Polyuréthanes
Ressources renouvelablesIndex. décimale : 667.9 Revêtements et enduits Résumé : A bifunctional polymeric isocyanate based on hexamethylene diisocyanate (HDI) has recently been developed. It has two NCO groups per molecule, a low viscosity, and a long hydrophobic chain. The product has a 32% carbon content obtained from renewable resources. Note de contenu : - Longer pot life, lower viscosity
- A possible building block
- BPI as internal plasticiser
- TPUS
- Table 1 : Composition of the TPUs used in the study
- Table 2 : Thermal properties of the TPUs. First run from 20°C to 250°C at 10°C/min ; second run from 250°C to -80°C at 10°C/min ; third run from -80°C to 250°C at 10°C/min
- Table 3 : Composition and properties of PUDs
- Fig. 1 : ATR-IRFT spectra of TPU cross-sections between 3000 cm-1 and 3800 cm-1
- Fig. 3 : Stress/strain curves of polyether and polyester TPU modified with different levels of BPI, sensor 10 kN, speed 300 mm/minEn ligne : https://drive.google.com/file/d/1bzsc2Pq2IxqVmBEAJF2MLWQALp6GKMKz/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=33520
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 2 (02/2020) . - p. 26-31[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21541 - Périodique Bibliothèque principale Documentaires Disponible Les silicones gagnent du terrain / Philippe Cassagnau in PLASTIQUES & CAOUTCHOUCS MAGAZINE, N° 876 (06/2010)
[article]
Titre : Les silicones gagnent du terrain Type de document : texte imprimé Auteurs : Philippe Cassagnau, Auteur ; Delphine Blanc, Auteur Année de publication : 2010 Article en page(s) : p. 46-48 Langues : Français (fre) Catégories : Contraintes (mécanique)
Durée de vie en pot
Mousses plastiques
Mousses plastiques -- Propriétés mécaniques
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 668.4 Plastiques, vinyles Résumé : Mousses polymères - Les silicones sous forme moussée n'ont à envier aux mousses polyuréthanes. Leur développement récent démontre une stabilité thermique supérieure à celle d'autres polymères. Note de contenu : - Principe
- Croissance et coalescence des bulles
- Propriétés et applications
- Tableau : Caractéristiques et avantages des mousses obtenuesPermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=21188
in PLASTIQUES & CAOUTCHOUCS MAGAZINE > N° 876 (06/2010) . - p. 46-48[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 012264 - Périodique Bibliothèque principale Documentaires Disponible Stabilisation of hot melt adhesives / Olga Kuvshinnikova in ADHESIVE TECHNOLOGY, Vol. 15, N° 1 (03/1998)
[article]
Titre : Stabilisation of hot melt adhesives Type de document : texte imprimé Auteurs : Olga Kuvshinnikova, Auteur ; Robert E. Lee, Auteur Année de publication : 1998 Article en page(s) : p. 14-17 Langues : Anglais (eng) Catégories : Adhésifs thermofusibles
Copolymère éthylène acétate de vinyle
Durée de vie en pot
Formulation (génie chimique) -- StabilitéIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : This article discusses the stabilisation of hot melt adhesive formulations using conventional and non-conventional methods to improve pot life. Note de contenu : - EVA hot melt adhesives
- Degying convention
- Table 1 : Free radical steps
- Table 2 : A typical EVA formulation
- Fig. 1 : Auto-oxidation stages
- Fig. 2 : Extinction coefficients of phenolic transformation products
- Fig. 3 : TGA results for HMA components
- Fig. 4 : Colour improvement of aged EVA systems
- Fig. 5 : Use of acid scavengers to improve EVA colour. AS1 = calcium stearate, AS2 = calcium lactate, AS3 = epoxidised soy bean oil, AS4 = DHT4-APermalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37385
in ADHESIVE TECHNOLOGY > Vol. 15, N° 1 (03/1998) . - p. 14-17[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 001979 - Périodique Bibliothèque principale Documentaires Disponible Syntheses and characterizations of two-component polyurethane flame retardant coatings using 2,4-dichloro modified polyesters / Chang-Hwan Park in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 69, N° 875 (12/1997)
PermalinkTaking the next step in fast curing 2K NCO technology / F. Fallani in SURFACE COATINGS INTERNATIONAL, Vol. 104.2 (03-04/2021)
PermalinkTaming the Michael addition reaction / Richard Brinkhuis in EUROPEAN COATINGS JOURNAL (ECJ), N° 5 (05/2015)
PermalinkTime and temperature : don't forget about humidity / Troy E. Fraebel in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 6 (06/2018)
PermalinkPermalinkTwo component waterborne polyurethane topcoat for bridges / Mangesh Sidam in PAINTINDIA, Vol. LXXI, N° 11 (11/2021)
PermalinkUrethane-modified VAE emulsion improves heat resistance / Wayne R. Furlan in ADHESIVES AGE, Vol. 37, N° 1 (02/1994)
PermalinkA versatile, high-performance polyol chemistry for broad industrial market use / Jamie Dziczkowski in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 208, N° 4646 (11/2018)
PermalinkPermalink