Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Conducting a brighter future / Dmitriy Chebochacov in EUROPEAN COATINGS JOURNAL (ECJ), N° 7-8 (07-08/2018)
[article]
Titre : Conducting a brighter future : Graphene nanotubes add permanence to and enable coloration of anti-static coatings Type de document : texte imprimé Auteurs : Dmitriy Chebochacov, Auteur ; Evgeniy Ilin, Auteur ; Mikhail Predtechenskiy, Auteur Année de publication : 2018 Article en page(s) : p. 34-38 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Antistatiques
Epoxydes
GraphèneLe graphène est un cristal bidimensionnel (monoplan) de carbone dont l'empilement constitue le graphite. Il a été isolé en 2004 par Andre Geim, du département de physique de l'université de Manchester, qui a reçu pour cette découverte le prix Nobel de physique en 2010 avec Konstantin Novoselov. Il peut être produit de deux manières : par extraction mécanique du graphite (graphène exfolié) dont la technique a été mise au point en 2004, ou par chauffage d'un cristal de carbure de silicium, qui permet la libération des atomes de silicium (graphène epitaxié). Record en conduction thermique jusqu'à 5300 W.m-1.K-1. C'est aussi un matériaux conducteur.
Nanotubes
Polyuréthanes
Revêtements -- Additifs:Peinture -- Additifs
Revêtements -- Coloration:Peinture -- ColorationIndex. décimale : 667.9 Revêtements et enduits Résumé : Anti-static coatings are designed to dissipate charge and protect workers or sensitive electronic components from accumulated static electricity. Conventional coatings have required manufacturers to compromise on certain properties depending on their application. Graphene nanotubes provide an economically and technologically viable alternative for industry offering extended coating lifecycles and improved top-coat colouration. Note de contenu : - Economically viable graphene nanotubes
- Dissipative and conductive ranges for most applications
- Permanent and stable conductivity in coloured PU and epoxy coatings
- Nanotubes contribute to entending lifecycle
- Fig. 1 : Comparison of the required loading levels of various conductive additives
- Fig. 2 :SEM micrographs of graphene nanotubes
- Fig. 3 : Volume resistivity in epoxy and polyester resin at various loadings of graphene nanotube additive
- Fig. 4 : Polymer-based graphene nanotube concentrates
- Fig. 5 : Mixing conditions and the optimal relative position of the stirrer, container and mixed volume
- Fig. 6 : Stable resistivity ina two-layer anti-static polyurethane coating with bright colour pigmentsEn ligne : https://drive.google.com/file/d/1kNiro1xqpUkKd5BT8pLTc7e2lrEU4C_6/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30837
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 7-8 (07-08/2018) . - p. 34-38[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 20098 - Périodique Bibliothèque principale Documentaires Disponible Conductive polymers as anticorrosive additive for marine coatings : a review / Umesh Wagh in PAINTINDIA, Vol. LXX, N° 9 (09/2020)
[article]
Titre : Conductive polymers as anticorrosive additive for marine coatings : a review Type de document : texte imprimé Auteurs : Umesh Wagh, Auteur ; Vivek Krishnan, Auteur ; Ashok Kumar, Auteur Année de publication : 2020 Article en page(s) : p. 84-95 Note générale : Bibliogr. Langues : Anglais (eng) Catégories : Anticorrosifs
Anticorrosion
Conducteurs organiques
Corrosion
Epoxydes
Métaux -- Oxydation anodique
Métaux -- Revêtements protecteurs
Passivité (Chimie)
Polyaniline
Polythiophènes
Revêtements -- Additifs:Peinture -- Additifs
Système de libération contrôlée (technologie)
ThermogravimétrieIndex. décimale : 667.9 Revêtements et enduits Résumé : Protection of metals and alloys against corrosion by using organic coatings is an area of great interest. Thus, the development of new paints attempts to improve the performance increasing their corrosion resistance and extending the fields of application. Within coating technology, there is increasing interest in the development of efficient anticorrosive additives able to replace the conventional inorganic anticorrosive pigments usually added to paints, which may have detrimental effects on both environment and health. A number of recent studies have evidenced that the modification of a paint formulation by the addition of a low concentration of conducting polymer (0.2-0.3%, w/w) increases sign ificantly the protective properties of the coating. Here we focus on the principles of anticorrosive additives based on conducting polymers for marine paints. The article reviews the most important findings achieved in recent studies. The general aim of this work is to set new standards for research and development in the paint industry by focussing on the addition of a conducting polymerto paint formulation without losing its properties and assuring a good performance. Note de contenu : - Basics of corrosion
- Introduction to conductive polymers
- Conventional paint system for corrosion protection
- Conductive polymers (CP) based anticorrosive paints
- Mechanism of corrosion protection using conducting polymers
- Anodic protection mechanism
- Controlled inhibitor release mechanism
- Fig. 1 : Electrochemical corrosion showing rusting of plain carbon steel
- Fig. 2 : Chemical structure of polythiophene and polyaniline
- Fig. 3 : Outline of the redox-reactions that combines the emeraldine form and the leuco forms of polyaniline and their chemical structures
- Fig. 4 : TGA curve of epoxy paint with and without corrosion inhibitors
- Fig. 5 : Photographs of the painted rectangular test pieces (scale bar: 1 cm): (a) initial sample, (b) and (c) samples without and with conducting polymer, respectively, optical micrographs from the polymeric films (scale bar: 200_m) and scanning electron micrographs (scale bar: 100 _m)
- Fig. 6 : Passivation of steel by conducting PANI-based paint coating
- Fig. 7 : Controlled inhibitor release mechanism for a metal, M coated by a CP layer such as PANI doped with an ion, A-which acts as a corrosion inhibitorEn ligne : https://drive.google.com/file/d/14IhkCrcgpw7YVYEajqQYxADflGg77zRs/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34662
in PAINTINDIA > Vol. LXX, N° 9 (09/2020) . - p. 84-95[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 22359 - Périodique Bibliothèque principale Documentaires Disponible Considerations for reconstruction of a bridge exhibiting staining / Cynthia O'Malley in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 35, N° 4 (04/2018)
[article]
Titre : Considerations for reconstruction of a bridge exhibiting staining Type de document : texte imprimé Auteurs : Cynthia O'Malley, Auteur Année de publication : 2018 Article en page(s) : p. 13-17 Langues : Américain (ame) Catégories : Acier L'acier est un alliage métallique utilisé dans les domaines de la construction métallique et de la construction mécanique.
L'acier est constitué d'au moins deux éléments, le fer, très majoritaire, et le carbone, dans des proportions comprises entre 0,02 % et 2 % en masse1.
C'est essentiellement la teneur en carbone qui confère à l'alliage les propriétés du métal qu'on appelle "acier". Il existe d’autres métaux à base de fer qui ne sont pas des aciers comme les fontes et les ferronickels par exemple.
Anticorrosifs
Anticorrosion
Copolymère silicone acrylique
Epoxydes
Expertises
Métaux -- Revêtements protecteurs
Ponts -- entretien et réparations
Ponts métalliques -- Revêtements protecteurs
Revêtements -- Défauts:Peinture -- Défauts
Revêtements multicouchesIndex. décimale : 667.9 Revêtements et enduits Résumé : When a large-scale bridge is in need of significant reconstruction, many factors should be considered prior to initiation of the project.
Part of this particular reconstruction involved repainting of the structural steel on a 40-foot-wide lift bridge that had a total length (including approaches) of 2,877 feet, with a main span of 418 feet. The coating system selected consisted of four coats: a zinc primer coat, a tie-coat, one coat of epoxy and an acrylic polysiloxane topcoat with high gloss.
The coating system was applied during the winter, spring and summer of 2008. Sometime after the topcoat was applied to the bridge, staining was noticed in numerous areas. These stains appeared as spots and streaks and were observed on various locations of the bridge, but the most concentrated areas were on the north side. The owner, through a recommendation of the prime engineer, contracted an independent, third-party consultant to investigate the staining problem and determine the cause in order to prepare for further rehabilitation.Note de contenu : - Field investigation-
- Laboratory analysis and discussion
- Fig. 1 : Close-up of stain around particle embedded in the topcoat
- Fig. 2 : Streaks of staining on one of the bridge lift towers
- Fig. 3 : Staining on north box chord
- Fig. 4 : Severe staining on north fascia
- Fig. 5 : Close-up of stain streak in sample area
- Fig. 6 : Close-up of stain underneath rivetEn ligne : https://www.paintsquare.com/archive/?fuseaction=view&articleid=6288 Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30684
in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL) > Vol. 35, N° 4 (04/2018) . - p. 13-17[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19882 - Périodique Bibliothèque principale Documentaires Disponible Controlling rheologie in structural adhesives / Elizabeth Sims in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 19, N° 9 (09/2012)
[article]
Titre : Controlling rheologie in structural adhesives Type de document : texte imprimé Auteurs : Elizabeth Sims, Auteur ; Marco Villalobos, Auteur Année de publication : 2012 Article en page(s) : p. 16-19 Langues : Américain (ame) Catégories : Adhésifs structuraux
Eoliennes -- Matériaux
Epoxydes
Rhéologie
SiliceLa silice est la forme naturelle du dioxyde de silicium (SiO2) qui entre dans la composition de nombreux minéraux.
La silice existe à l'état libre sous différentes formes cristallines ou amorphes et à l'état combiné dans les silicates, les groupes SiO2 étant alors liés à d'autres atomes (Al : Aluminium, Fe : Fer, Mg : Magnésium, Ca : Calcium, Na : Sodium, K : Potassium...).
Les silicates sont les constituants principaux du manteau et de l'écorce terrestre. La silice libre est également très abondante dans la nature, sous forme de quartz, de calcédoine et de terre de diatomée. La silice représente 60,6 % de la masse de la croûte terrestre continentale.
Solutions de polymèreIndex. décimale : 668.3 Adhésifs et produits semblables Résumé : The article reports on the development of fumed silica particles to improved the rheology control of structural adhesives. It states that the new product is designed to rapidly self assemble in three dimension (3D) network structures when dispersed in liquid polymers with the physical and chemical qualities of epoxy resins. However, the application faces challenges in the production of composite blades for wind energy turbines. En ligne : http://www.adhesivesmag.com/articles/91290-controlling-rheology-in-structural-ad [...] Format de la ressource électronique : Web Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18943
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 19, N° 9 (09/2012) . - p. 16-19[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14484 - Périodique Bibliothèque principale Documentaires Disponible Cool customers : Premixed and frozen packages for adhesives and sealants / Jamie Ellsworth in ADHESIVES & SEALANTS INDUSTRY (ASI), Vol. 27, N° 3 (03/2020)
[article]
Titre : Cool customers : Premixed and frozen packages for adhesives and sealants : Premixed and frozen packages provide highly reliable convenience packaging for plural-component resins Type de document : texte imprimé Auteurs : Jamie Ellsworth, Auteur Année de publication : 2020 Article en page(s) : p. 22-23 Langues : Américain (ame) Catégories : Adhésifs dans les équipements électriques/électroniques
Assemblages collés
Cartouches (emballages)
Epoxydes
Polyuréthanes
Seringues
SiliconesLes silicones, ou polysiloxanes, sont des composés inorganiques formés d'une chaine silicium-oxygène (...-Si-O-Si-O-Si-O-...) sur laquelle des groupes se fixent, sur les atomes de silicium. Certains groupes organiques peuvent être utilisés pour relier entre elles plusieurs de ces chaines (...-Si-O-...). Le type le plus courant est le poly(diméthylsiloxane) linéaire ou PDMS. Le second groupe en importance de matériaux en silicone est celui des résines de silicone, formées par des oligosiloxanes ramifiés ou en forme de cage (wiki).Index. décimale : 668.3 Adhésifs et produits semblables Résumé : Premixed and frozen (PMF) refers to plural-component resin systems delivered in syringes and cartridges that are premixed and frozen in dry ice. PMF packages are convenient and reliable, with resins precisely weighed and mixed at the proper ratio, degassed, and flash frozen in a dry ice bath at -80˚C. Syringes from 1-55 cc are the most common PMF packages, but larger cartridges from 2.5-32 oz are also available, as are jars and cans.
After flash freezing, PMF packages are either packed in insulated containers with dry ice and shipped via expedited freight, or they are stored in -40˚C freezers for later shipment. The end user must have a -40˚C freezer available in order to store PMF packages for later production use.Note de contenu : - Creating PMF Packages
- Receiving PMF Packages
- Thawing PMF Packages
- PMF Package Types
- The Ultimate PackageEn ligne : https://www.adhesivesmag.com/articles/97591-cool-customers-premixed-and-frozen-p [...] Format de la ressource électronique : Html Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=34037
in ADHESIVES & SEALANTS INDUSTRY (ASI) > Vol. 27, N° 3 (03/2020) . - p. 22-23[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 21620 - Périodique Bibliothèque principale Documentaires Disponible 21870 - Périodique Bibliothèque principale Documentaires Disponible PermalinkCorrosion and its control in sugar industry / Raghavendra Pratap in PAINTINDIA, Vol. LXVII, N° 1 (01/2017)
PermalinkCorrosion beneath a blister with high impedance in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 5 (09/2020)
PermalinkCorrosion inhibitors for maintenance and light duty applications : waterborne alkyds / Tony Gichuhi in PAINTINDIA, Vol. LXI, N° 6 (06/2011)
PermalinkCorrosion protection and outdoor durability in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 203, N° 4589 (10/2013)
PermalinkCorrosion protection : looking ahead / Sandy Morrison in SURFACE COATINGS INTERNATIONAL, Vol. 93, 1 (02/2010)
PermalinkCorrosion protection of magnesium alloy ZM21 by polyaniline-blended coatings / S. Sathiyanarayanan in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 5, N° 4 (12/2008)
PermalinkCorrosion protection of offshore wind turbines / Karsten Mühlberg in JOURNAL OF PROTECTIVE COATINGS & LININGS (JPCL), Vol. 27, N° 3 (03/2010)
PermalinkCorrosion protection of underground pipelines and other structures / Abhijit Singh in PAINTINDIA, Vol. LXVI, N° 12 (12/2016)
PermalinkCorrosion resistance of functionalized carbon nanotubes enhanced epoxy coatings on sintered NdFeB magnets / Hongyi yang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, N° 5 (09/2022)
PermalinkCorrosion resistance of a self-curing waterborne epoxy resin coating / Gongwen Tang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 16, N° 3 (05/2019)
PermalinkCost-effective corrosion barriers / Samuel Kenig in EUROPEAN COATINGS JOURNAL (ECJ), N° 7-8 (07-08/2016)
PermalinkCrack repair with CFRP patches and toughened epoxy adhesives / Yvonne Ciupack in ADHESION - ADHESIVES + SEALANTS, Vol. 21, N° 1/2024 (2024)
PermalinkCreating new barriers with graphene / Richard Akam in SURFACE COATINGS INTERNATIONAL, Vol. 99.5 (10-11/2016)
PermalinkCreating new barriers with graphene / Richard Akam in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4627 (12/2016)
PermalinkCrosslinked polyurethane–epoxy hybrid emulsion with core–shell structure / Wen Xiufang in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 7, N° 3 (05/2010)
PermalinkCRP components with class A surfaces / Christian Hopmann in KUNSTSTOFFE INTERNATIONAL, Vol. 102, N° 6 (06/2012)
PermalinkPermalinkCure and morphology of epoxy/polyester powder coatings containing titanium dioxide : a thermally stimulated discharge study / Emile C. Trottier in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 9, N° 6 (11/2012)
PermalinkCure behavior of polyester-acrylate hybrid powder coatings / Alan Toman in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 71, N° 893 (06/1999)
Permalink