Accueil
Catégories
Ajouter le résultat dans votre panier Affiner la recherche
Etendre la recherche sur niveau(x) vers le bas
Carbon processing with high process validation / Karl Müll in CHEMICAL FIBERS INTERNATIONAL, (10/2012)
[article]
Titre : Carbon processing with high process validation Type de document : texte imprimé Auteurs : Karl Müll, Auteur Année de publication : 2012 Article en page(s) : p. 50-51 Langues : Anglais (eng) Catégories : Carbone
Durée de vie (Ingénierie)
Enduction textile
Fibres textiles synthétiques
Fibrillation
Résistance à la rupture
Revêtements:PeintureIndex. décimale : 677.4 Textiles artificiels Résumé : Carbon is lightweight (30% lighter than aluminum, 50% lighter than steel), stainless, temperature-resistant, extremely tear-resistant despite the low weight - and highly sensitive. Coating the yarn and filament guiding parts with carbon processing by Topocrom GmbH guarantees a much better process validation. Filament breaks and splicing are significantly reduced and the lifetime of the surface of the filament guiding parts is considerably increased by the wear-resistant coating. Note de contenu : - Problems in fiber production and roving processing
- Carbon processing in intelligent closed reactor plating technology
- Benefits of topcrom surface in guiding yarnsEn ligne : https://drive.google.com/file/d/1kSmLWNa9jkZI0Cq2oUSzTtyaq3rbVV5D/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=16336
in CHEMICAL FIBERS INTERNATIONAL > (10/2012) . - p. 50-51[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 14248 - Périodique Bibliothèque principale Documentaires Disponible Cement mortar reinforced with palm nuts naturals fibers : study of the mechanical properties / Christian Bopda Fokam in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES, Vol. 30, N° 1 (02/2020)
[article]
Titre : Cement mortar reinforced with palm nuts naturals fibers : study of the mechanical properties Type de document : texte imprimé Auteurs : Christian Bopda Fokam, Auteur ; Eric Toumi, Auteur ; Bienvenu Kenmeugne, Auteur ; Lucien Meva’a, Auteur ; Khalifa Mansouri, Auteur Année de publication : 2020 Article en page(s) : p. 9-13 Note générale : Bibliogr. Langues : Français (fre) Catégories : Composites à fibres végétales
Durée de vie (Ingénierie)
Matériaux cimentaires
Mortier
Noix de palme et constituantsIndex. décimale : 620.13 Matériaux de construction : pierre, ciment, béton, liants de Résumé : This paper presents an experimental study of the influence of the addition of palm nut fiber on the mechanical strength of cement mortar. Cement mortar specimens reinforced with naturals palm nut fibers have been developed containing between 0 and 3.5% volume fraction fibers. Compression test and flexural test (3-point bending test) are performed on the different samples. It is found from the flexural test that the flexural strength of the mortar reinforced with palm nuts increases slightly regardless of the maturation time of the sample. Conversely, compression tests show a gradual decrease in mechanical strength with the addition of fibers. Note de contenu : - MATERIALS AND EXPERIMENTAL TECHNIQUES : Biomaterial used in this study - Manufacture of fiber-reinforced cement mortar sample - Tensile/compression test machine
- RESULTS AND DISCUSSIONS : Density of fiber cement mortar specimens - Analysis of flexural tests on fiber mortar specimens - Analysis of compressive tests on fibered mortar
- Table 1 : Average size of extracted fibers
- Table 2 : Fiber Composition of different cement mortar specimensDOI : https://doi.org/10.18280/rcma.300102 En ligne : https://www.iieta.org/download/file/fid/27096 Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=37584
in REVUE DES COMPOSITES ET DES MATERIAUX AVANCES > Vol. 30, N° 1 (02/2020) . - p. 9-13[article]
[article]
Titre : Changing perspectives : How legislation is affecting the development of epoxy paints Type de document : texte imprimé Auteurs : Martin Gerlitz, Auteur Année de publication : 2018 Article en page(s) : p. 18-24 Langues : Anglais (eng) Catégories : Amines Une amine est un composé organique dérivé de l'ammoniac dont certains hydrogènes ont été remplacés par un groupement carboné. Si l'un des carbones liés à l'atome d'azote fait partie d'un groupement carbonyle, la molécule appartient à la famille des amides. Découvertes en 1849, par Wurtz les amines furent initialement appelées alcaloïdes artificiels.
On parle d'amine primaire, secondaire ou tertiaire selon que l'on a un, deux ou trois hydrogènes substitués.
Par exemple, la triméthylamine est une amine tertiaire, de formule N(CH3)3.
Typiquement, les amines sont obtenues par alkylation d'amines de rang inférieur. En alkylant l'ammoniac, on obtient des amines primaires, qui peuvent être alkylées en amines secondaires puis amines tertiaires. L'alkylation de ces dernières permet d'obtenir des sels d'ammonium quaternaire.
D'autre méthodes existent : 1. Les amines primaires peuvent être obtenues par réduction d'un groupement azoture, 2. Les amines peuvent aussi être obtenues par la réduction d'un amide, à l'aide d'un hydrure, 3. L'amination réductrice permet l'obtention d'amines substituées à partir de composés carbonylés (aldéhydes ou cétones), 4. Les amines primaires peuvent être obtenues par la réaction de Gabriel.
Anticorrosion
Chimie industrielle -- Législation -- Pays de l'Union européenne
Coût -- Contrôle
Durée de vie (Ingénierie)
Epoxydes
Essais de brouillard salin
Polymères en émulsion
Réduction des composés organiques volatils
Réticulants
Réticulation (polymérisation)
Revêtements en phase aqueuse -- Séchage:Peinture en phase aqueuse -- Séchage
Revêtements en phase aqueuse:Peinture en phase aqueuseIndex. décimale : 667.9 Revêtements et enduits Résumé : The development of epoxy protective coatings is increasingly being driven by legislative requirements rather than technical ones. A new REACH deadline in May 2018 will lead to some materials used in low volumes being withdrawn. Issues arising from this and technical developments which can lead to cost benefits are discussed. Note de contenu : - How tougher reach requirements drive development
- VOC reduction remains in focus
- Zero-VOC coatings demonstrate excellent performance
- Health and safety aspects of formulation development
- The many facets of total coatings cost reduction
- Low temperature ambient cure offers several benefits
- Faster cure comes at a price
- Performance gains that can generate savings
- An overview of the product development panorama
- FIGURE : Minimum film formation temperature (MFT) and pot life comparison of 2K epoxy amine systems based either on LER with reactive diluents or SER dispersions
- TABLES : 1. Salt spray test results of system A (liquid epoxy resin containing reactive diluents) and system B (water-borne solid epoxy resin dispersion) cured with the same water-borne amine curative – 2. Test results on water-borne systems after four years of outdoor exposure in a marine environment – 3. Comparison of different epoxy components in terms of cure speed, pot life and drying behavior – 4. Features of the main curative technologies currently used in anticorrosive epoxy paintsEn ligne : https://drive.google.com/file/d/1xrh3uGBufyYEJGkOJhLAoTXk06xhO4xM/view?usp=drive [...] Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=30195
in EUROPEAN COATINGS JOURNAL (ECJ) > N° 2 (02/2018) . - p. 18-24[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 19608 - Périodique Bibliothèque principale Documentaires Disponible Characterization of the ageing of an epoxy resin using high temperature nanoindentation / Bruno Passilly in MATERIAUX & TECHNIQUES, Vol. 107, N° 2 (2019)
[article]
Titre : Characterization of the ageing of an epoxy resin using high temperature nanoindentation Type de document : texte imprimé Auteurs : Bruno Passilly, Auteur ; Romain Delannoy, Auteur Année de publication : 2019 Article en page(s) : 6 p. Note générale : Bibliogr. Langues : Français (fre) Catégories : Analyse mécanique dynamique
Caractérisation
Durée de vie (Ingénierie)
Elasticité
Epoxydes
Hautes températures
Indentation des matériaux
Matières plastiques -- Détérioration
NanoindentationIndex. décimale : 668.4 Plastiques, vinyles Résumé : This article aims to understand better the mechanical properties and behavior of organic matrix composite materials under elevated temperature conditions. Two specific specimens of cured RTM6 epoxy resin are tested with DMA analysis: one being unaged and the other one aged for 5000 h at 130 °C under ambient air. Anti-plasticization effects seem to occur on aged resin. Series of nano-indentation tests are carried out from the surface to the core of the sample so as to measure gradient properties of the resin, at temperatures up to 150 °C using a high temperature indentation machine prototype. Thermo-oxidation phenomena involve oxidized layer formation during thermal ageing of the epoxy resin which is characterized through measurements of indentation Young’s modulus. After aged treatment, the variation of Young’s modulus of the oxidized layer at the surface of the sample is not clearly affected by the increasing test temperature whereas Young’s modulus of the core of the sample is decreasing significantly with the temperature test as on unaged epoxy resin. Thus, asymptotic growing of the oxidized layer is then confirmed. Note de contenu : - SAMPLES PREPARATION
- INSTRUMENTATION HIGH TEMPERATURE NANOINDENTATION : High temperature nanoindentation apparatus - Loading and unloading cycle - Determination of the mechanical properties
- HIGH TEMPERATURE MECHANICAL PROPERTIES OF EPOXY RESIN : DMA results - Effect of ageing - Unaged resin characterization - Aged resin characterizationRéférence de l'article : 206 DOI : 10.1051/mattech/2019004 En ligne : https://www.mattech-journal.org/articles/mattech/pdf/2019/02/mt180080.pdf Format de la ressource électronique : Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=32770
in MATERIAUX & TECHNIQUES > Vol. 107, N° 2 (2019) . - 6 p.[article]Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 21034 - Périodique Bibliothèque principale Documentaires Disponible Chemical criteria for durable automotive topcoats / David R. Bauer in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 66, N° 835 (08/1994)
[article]
Titre : Chemical criteria for durable automotive topcoats Type de document : texte imprimé Auteurs : David R. Bauer, Auteur Année de publication : 1994 Article en page(s) : p. 57-65 Note générale : Bibliogr. Langues : Américain (ame) Catégories : Absorbeurs de rayonnement ultraviolet
AminesUne amine est un composé organique dérivé de l'ammoniac dont certains hydrogènes ont été remplacés par un groupement carboné. Si l'un des carbones liés à l'atome d'azote fait partie d'un groupement carbonyle, la molécule appartient à la famille des amides. Découvertes en 1849, par Wurtz les amines furent initialement appelées alcaloïdes artificiels.
On parle d'amine primaire, secondaire ou tertiaire selon que l'on a un, deux ou trois hydrogènes substitués.
Par exemple, la triméthylamine est une amine tertiaire, de formule N(CH3)3.
Typiquement, les amines sont obtenues par alkylation d'amines de rang inférieur. En alkylant l'ammoniac, on obtient des amines primaires, qui peuvent être alkylées en amines secondaires puis amines tertiaires. L'alkylation de ces dernières permet d'obtenir des sels d'ammonium quaternaire.
D'autre méthodes existent : 1. Les amines primaires peuvent être obtenues par réduction d'un groupement azoture, 2. Les amines peuvent aussi être obtenues par la réduction d'un amide, à l'aide d'un hydrure, 3. L'amination réductrice permet l'obtention d'amines substituées à partir de composés carbonylés (aldéhydes ou cétones), 4. Les amines primaires peuvent être obtenues par la réaction de Gabriel.
Automobiles -- Revêtements:Automobiles -- Peinture
Automotile -- Peinture -- Détérioration
Couches minces
Durée de vie (Ingénierie)
Photodétérioration
Réticulants
Revêtements -- Additifs:Peinture -- Additifs
Revêtements:Peinture
VernisIndex. décimale : 667.9 Revêtements et enduits Résumé : Modern automotive basecoat/clearcoat enamels are expected to maintain their attractive appearance over the life of the vehicle with no catastrophic failures such as cracks or delaminations. Ensuring the durability of automotive topcoat requires an understanding of the relationships between exposure conditions, the chemical changes that can occur in the various coating layers, and potential failure modes. This paper reviews those relationships with particular emphasis on the chemistry and mechanisms of coating degradation and stabilization. The key factors that affect topcoat appearance durability are as follows: resistance of clearcoat to acid attack and hydrolysis; intrinsic clearcoat photostability (free radical formation rates); nature of photooxidative pathway in the clearcoat (e.g., chain scission versus crosslink formation); effectveness of hindered amine light stabilizer; permanence of ultraviolet light absorbers; and photostability of basecoat and primer. These factors are discussed in terms of specific coating chemistries. The effects of application variables as well as protocols for evaluating performance are discussed. Note de contenu : - Potential appearance changes in basecoat/clearcoats
- Clearcoat resin and crosslinker chemistry
- Ultraviolet light absorbers
- Hindered amine light stabilizers
- Basecoat, primer, and substrate photostability
Permalink : https://e-campus.itech.fr/pmb/opac_css/index.php?lvl=notice_display&id=18679
in JOURNAL OF COATINGS TECHNOLOGY (JCT) > Vol. 66, N° 835 (08/1994) . - p. 57-65[article]Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 003469 - Périodique Bibliothèque principale Documentaires Disponible 003482 - Périodique Bibliothèque principale Documentaires Exclu du prêt Chemical origins of paint performance / Ray A. Dickie in JOURNAL OF COATINGS TECHNOLOGY (JCT), Vol. 66, N° 834 (07/1994)
PermalinkChemistry and application of emerging ecofriendly antifouling paints : a review / Sampson Kofi Kyei in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 17, N° 2 (03/2020)
PermalinkLa chimie du végétal et les nouveaux synthons accessibles par les biotechnologies / Paul Colonna in L'ACTUALITE CHIMIQUE, N° 375-376 (06-07-08/2013)
PermalinkLa chimie verte, catalyseur de l'innovation / Fabrice Gallou in L'ACTUALITE CHIMIQUE, N° 463 (06/2021)
PermalinkChoosing an outdoor durable powder coating / Kevin M. Biller in POLYMERS PAINT COLOUR JOURNAL - PPCJ, Vol. 206, N° 4625 (10/2016)
PermalinkCircular economy and adhesive bonding technology, part 2 / Andreas GroB in ADHESION - ADHESIVES + SEALANTS, Vol. 19, N° 1/2022 (2022)
PermalinkClosed-loop lifecycle management of automotive components: holistic life cycle approach as decision support system / Fatih Karakoyun in MATERIAUX & TECHNIQUES, Vol. 102, N° 6/7 (2014)
PermalinkCollaboration speeds up automotive manufacturing / Frank Deutschländer in JEC COMPOSITES MAGAZINE, N° 82 (07/2013)
PermalinkLe collage structural dans la construction navale / A. Roy in CAOUTCHOUCS & PLASTIQUES, N° 822 (05/2004)
PermalinkComment améliorer la durabilité de bétons plus éco-respectueux grâce à des polymères bactériens / Sébastien Roux in MATERIAUX & TECHNIQUES, Vol. 99, N° 5 (2011)
PermalinkComparative examination of adhesive and cohesive properties of fluorinated coatings on stone/tile surfaces / Hau-Nan Lee in JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 11, N° 6 (11/2014)
PermalinkComparison of the sustainability of the vegetable, wet-white and chromium tanning processes through the life cycle analysis / Anna Bacardit in JOURNAL OF THE AMERICAN LEATHER CHEMISTS ASSOCIATION (JALCA), Vol. CXV, N° 3 (03/2020)
PermalinkComportement des bétons en contact avec des milieux contenant des micro-organismes. Cas particulier du mécanisme d’attaque des bétons dans les réseaux d’assainissement / S. Blondelot in MATERIAUX & TECHNIQUES, Vol. 98, N° 1 (2010)
PermalinkPermalinkComposites. concevoir en intégrant le vieillissement / Djamel Khames in INDUSTRIE & TECHNOLOGIES, N° 952 (11/02/2013)
Permalink